From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH 3/3] host-openocd: add new package
Date: Mon, 23 Jun 2014 16:09:55 +0200 [thread overview]
Message-ID: <20140623140955.GC21175@pengutronix.de> (raw)
In-Reply-To: <1403422869-13390-3-git-send-email-m.grzeschik@pengutronix.de>
On Sun, Jun 22, 2014 at 09:41:09AM +0200, Michael Grzeschik wrote:
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
> rules/host-openocd.in | 184 ++++++++++++++++++++++++++++++++++++++++++++++++
> rules/host-openocd.make | 71 +++++++++++++++++++
> 2 files changed, 255 insertions(+)
> create mode 100644 rules/host-openocd.in
> create mode 100644 rules/host-openocd.make
>
> diff --git a/rules/host-openocd.in b/rules/host-openocd.in
> new file mode 100644
> index 0000000..8071f3c
> --- /dev/null
> +++ b/rules/host-openocd.in
> @@ -0,0 +1,184 @@
> +## SECTION=hosttools
> +
> +menuconfig HOST_OOCD
> + tristate
> + prompt "openocd"
> + select HOST_LIBUSB
> + select HOST_LIBUSB_COMPAT
> + select HOST_LIBFTDI1
> + help
> + The "Open On-Chip Debugger" provides JTAG/SWD access from GDB
> + (or directly with TCL scripts) to processors with ARM and MIPS
> + based cores.
> +
> +if HOST_OOCD
> +
This is a host tool, so we don't have any real space constraints. And no
extra dependencies. Does it take a lot longer, when everything is enabled?
If not, then I'd suggest to just enable everything and drop the options.
Michael
> +config HOST_OOCD_DUMMY
> + prompt "dummy support"
> + bool
> +
> +config HOST_OOCD_FTDI
> + prompt "ftdi support"
> + bool
> +
> +config HOST_OOCD_STLINK
> + prompt "stlink support"
> + bool
> +
> +config HOST_OOCD_TI_ICDI
> + prompt "ti_icdi support"
> + bool
> +
> +config HOST_OOCD_ULINK
> + prompt "ulink support"
> + bool
> +
> +config HOST_OOCD_USBBLASTER2
> + prompt "usb blaster 2 support"
> + bool
> +
> +config HOST_OOCD_JLINK
> + prompt "jlink support"
> + bool
> +
> +config HOST_OOCD_OSBDM
> + prompt "osbdm support"
> + bool
> +
> +config HOST_OOCD_OPENDOUS
> + prompt "opendous support"
> + bool
> +
> +config HOST_OOCD_AICE
> + prompt "aice support"
> + bool
> +
> +config HOST_OOCD_VSLLINK
> + prompt "vsllink support"
> + bool
> +
> +config HOST_OOCD_USBPROG
> + prompt "usbprog support"
> + bool
> +
> +config HOST_OOCD_RLINK
> + prompt "rlink support"
> + bool
> +
> +config HOST_OOCD_ARMJTAGEW
> + prompt "armjtagew support"
> + bool
> +
> +config HOST_OOCD_CMSIS_DAP
> + prompt "cbsis-dap support"
> + bool
> +
> +config HOST_OOCD_PARPORT
> + prompt "parport support"
> + bool
> +
> +config HOST_OOCD_LEGACY_FT2232_LIBFTDI
> + prompt "legacy ft2232 libftdi support"
> + bool
> +
> +config HOST_OOCD_LEGACY_FT2232_FTD2XX
> + prompt "legacy ft2232 ftd2xx support"
> + bool
> +
> +config HOST_OOCD_JTAG_VPI
> + prompt "jtag vpi support"
> + bool
> +
> +config HOST_OOCD_LIBFTDI_USBBLASTER
> + prompt "libftdi usb blaster support"
> + bool
> +
> +config HOST_OOCD_FTD2XX_USBBLASTER
> + prompt "ftd2xx usb blaster support"
> + bool
> +
> +config HOST_OOCD_AMTJTAGA
> + prompt "amontec jtag accel support"
> + bool
> +
> +config HOST_OOCD_ZY1000M
> + prompt "zy1000 Master support"
> + bool
> +
> +config HOST_OOCD_ZY1000
> + prompt "zy1000 interface support"
> + bool
> +
> +config HOST_OOCD_IOUTIL
> + prompt "ioutil support"
> + bool
> +
> +config HOST_OOCD_EP93XX
> + prompt "ep93xx support"
> + bool
> +
> +config HOST_OOCD_AT91RM9200
> + prompt "at91rm9200 support"
> + bool
> +
> +config HOST_OOCD_BCM2835_GPIO
> + prompt "bcm2835 gpio support"
> + bool
> +
> +config HOST_OOCD_GW16012
> + prompt "gw16012 support"
> + bool
> +
> +config HOST_OOCD_PRESTO_LIBFTDI
> + prompt "presto_libftdi support"
> + bool
> +
> +config HOST_OOCD_PRESTO_FTD2XX
> + prompt "presto_ftd2xx support"
> + bool
> +
> +config HOST_OOCD_OPENJTAG_FTD2XX
> + prompt "openjtag_ftd2xx support"
> + bool
> +
> +config HOST_OOCD_OPENJTAG_FTDI
> + prompt "openjtag_ftdi support"
> + bool
> +
> +config HOST_OOCD_TRACE
> + prompt "oocd trace support"
> + bool
> +
> +config HOST_OOCD_BUSPIRATE
> + prompt "buspirate support"
> + bool
> +
> +config HOST_OOCD_SYSFS_GPIO
> + prompt "sysfs gpio support"
> + bool
> +
> +config HOST_OOCD_MINIDRIVER_DUMMY
> + prompt "minidriver dummy support"
> + bool
> +
> +config HOST_OOCD_LIBUSB0
> + prompt "libusb0 support"
> + bool
> +
> +config HOST_OOCD_REMOTE_BITBANG
> + prompt "remote bitbang support"
> + bool
> +
> +config HOST_OOCD_JTAG
> + string
> + prompt "target jtag device"
> + default "interface/ti-icdi.cfg"
> +
> +config HOST_OOCD_BOARD
> + string
> + prompt "target board to jtag"
> + default "board/ek-lm4f120xl.cfg"
> +
> +endif
> +~
> +~
> diff --git a/rules/host-openocd.make b/rules/host-openocd.make
> new file mode 100644
> index 0000000..2a87408
> --- /dev/null
> +++ b/rules/host-openocd.make
> @@ -0,0 +1,71 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2013 by Michael Grzeschik <mgr@pengutronix.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +HOST_PACKAGES-$(PTXCONF_HOST_OOCD) += host-oocd
> +
> +#
> +# Paths and names
> +#
> +HOST_OOCD_VERSION := 0.8.0
> +HOST_OOCD_MD5 := 6d83c34763a5f1d1ac7ad83c5a11f4fb
> +HOST_OOCD := openocd-$(HOST_OOCD_VERSION)
> +HOST_OOCD_SUFFIX := tar.bz2
> +HOST_OOCD_URL := $(call ptx/mirror, SF, openocd/$(HOST_OOCD).$(HOST_OOCD_SUFFIX))
> +HOST_OOCD_SOURCE := $(SRCDIR)/$(HOST_OOCD).$(HOST_OOCD_SUFFIX)
> +HOST_OOCD_DIR := $(HOST_BUILDDIR)/$(HOST_OOCD)
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +#
> +# autoconf
> +#
> +HOST_OOCD_CONF_TOOL := autoconf
> +HOST_OOCD_CONF_OPT := \
> + $(HOST_AUTOCONF) \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_DUMMY)-dummy \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_PARPORT)-parport \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_LIBFTDI)-ft2232_libftdi \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_FTD2XX)-ft2232_ftd2xx \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_FTDI_MPSSE)-ftdi \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_FTDI_USBBLASTER)-usb_blaster_libftdi \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_FTD2XX_USBBLASTER)-usb_blaster_ftd2xx \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_AMTJTAGA)-amtjtagaccel \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_XY1000M)-zy1000-master \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_XY1000)-zy1000 \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_IOUTIL)-ioutil \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_EB93XX)-ep93xx \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_AT91RM9200)-at91rm9200 \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_GW16012)-gw16012 \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_PRESTO_LIBFTDI)-presto_libftdi \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_PRESTO_FTD2XX)-presto_ftd2xx \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_USBPROG)-usbprog \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_TRACE)-oocd_trace \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_JLINK)-jlink \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_VSLLINK)-vsllink \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_RLINK)-rlink \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_ULINK)-ulink \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_ARM_JTAG_EW)-arm-jtag-ew \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_BUSPIRATE)-buspirate \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_STLINK)-stlink \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_TI_ICDI)-ti-icdi \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_OSBDM)-osbdm \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_OPENDOUS)-opendous \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_SYSFS_GPIO)-sysfsgpio \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_LIBUSB0)-libusb0 \
> + --$(call ptx/endis, PTXCONF_HOST_OOCD_REMOTE_BITBANG)-remote-bitbang
> +
> +
> +# vim: syntax=make
> --
> 2.0.0
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2014-06-23 14:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-22 7:41 [ptxdist] [PATCH 1/3] host-libftdi1: " Michael Grzeschik
2014-06-22 7:41 ` [ptxdist] [PATCH 2/3] host-libusb-compat: " Michael Grzeschik
2014-06-23 14:06 ` Michael Olbrich
2014-06-22 7:41 ` [ptxdist] [PATCH 3/3] host-openocd: " Michael Grzeschik
2014-06-23 14:09 ` Michael Olbrich [this message]
2014-09-29 17:27 ` Andreas Pretzsch
2014-06-23 14:03 ` [ptxdist] [PATCH 1/3] host-libftdi1: " Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140623140955.GC21175@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox