From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] net-snmp: Improved SNMPv3 authentication and privacy support.
Date: Thu, 6 Mar 2014 18:29:36 +0100 [thread overview]
Message-ID: <20140306172936.GJ32080@pengutronix.de> (raw)
In-Reply-To: <1392977215-14447-1-git-send-email-bth@kamstrup.dk>
On Fri, Feb 21, 2014 at 11:06:55AM +0100, Bruno Thomsen wrote:
> Enabled SHA authentication and AES privacy (encryption) using OpenSSL.
> Upgraded from libnl1 to libnl3 dependency.
>
> Tested SNMPv3 with USM (User-based Security Model) SHA auth + AES priv, minimal agent option disabled.
>
> Signed-off-by: Bruno Thomsen <bth@kamstrup.dk>
> ---
> rules/net-snmp.in | 12 +++++++++++-
> rules/net-snmp.make | 14 ++++++++++++--
> 2 files changed, 23 insertions(+), 3 deletions(-)
>
> diff --git a/rules/net-snmp.in b/rules/net-snmp.in
> index 9821328..10bbbd9 100644
> --- a/rules/net-snmp.in
> +++ b/rules/net-snmp.in
> @@ -5,8 +5,10 @@ menuconfig NET_SNMP
> select LIBC_M
> select GCCLIBS_GCC_S if NET_SNMP_AGENT
> select LIBC_DL if NET_SNMP_AGENT || NET_SNMP_APPLICATIONS
> - select LIBNL if NET_SNMP_AGENT || NET_SNMP_APPLICATIONS
> + select LIBNL3 if NET_SNMP_AGENT || NET_SNMP_APPLICATIONS
Are you sure about this? libnl3 requieres -$SYSROOT/libnl3 and I don't see
how this is added.
The rest looks ok, although the whole file could really use come cleanup.
But that's unrelated to this patch.
Michael
> select LM_SENSORS if NET_SNMP_MIB_MODULES_LM_SENSORS
> + select OPENSSL if NET_SNMP_SHA_AES
> + select NET_SNMP_PRIVACY if NET_SNMP_SHA_AES || NET_SNMP_DES
>
> if NET_SNMP
>
> @@ -200,6 +202,10 @@ config NET_SNMP_SNMPV2C
> bool
> prompt "support for SNMPv2c"
>
> +config NET_SNMP_PRIVACY
> + bool
> + prompt "support for privacy (encryption)"
> +
> config NET_SNMP_DES
> bool
> prompt "DES encryption"
> @@ -208,6 +214,10 @@ config NET_SNMP_MD5
> bool
> prompt "MD5 authentication"
>
> +config NET_SNMP_SHA_AES
> + bool
> + prompt "SHA authentication and AES encryption"
> +
> config NET_SNMP_DOM_SOCK_ONLY
> bool "Disable UDP/TCP transports for agentx" if NET_SNMP_AGENT
> default y
> diff --git a/rules/net-snmp.make b/rules/net-snmp.make
> index 6bdecd8..1397c2c 100644
> --- a/rules/net-snmp.make
> +++ b/rules/net-snmp.make
> @@ -47,7 +47,6 @@ NET_SNMP_AUTOCONF := \
> $(GLOBAL_IPV6_OPTION) \
> --with-defaults \
> --disable-manuals \
> - --without-openssl \
> --with-mib-modules="$(NET_SNMP_MIB_MODULES-y)" \
> --with-out-mib-modules="$(NET_SNMP_MIB_MODULES-)" \
> --with-mibs=$(PTXCONF_NET_SNMP_DEFAULT_MIBS) \
> @@ -58,7 +57,6 @@ NET_SNMP_AUTOCONF := \
> --disable-embedded-perl \
> --without-perl-modules \
> --disable-static \
> - --disable-privacy \
> --disable-internal-md5 \
> --$(call ptx/endis, PTXCONF_NET_SNMP_DOM_SOCK_ONLY)-agentx-dom-sock-only \
> --enable-mib-config-checking \
> @@ -121,6 +119,12 @@ else
> NET_SNMP_AUTOCONF += --disable-snmpv2c
> endif
>
> +ifdef PTXCONF_NET_SNMP_PRIVACY
> +NET_SNMP_AUTOCONF += --enable-privacy
> +else
> +NET_SNMP_AUTOCONF += --disable-privacy
> +endif
> +
> ifdef PTXCONF_NET_SNMP_DES
> NET_SNMP_AUTOCONF += --enable-des
> else
> @@ -133,6 +137,12 @@ else
> NET_SNMP_AUTOCONF += --disable-md5
> endif
>
> +ifdef PTXCONF_NET_SNMP_SHA_AES
> +NET_SNMP_AUTOCONF += --with-openssl
> +else
> +NET_SNMP_AUTOCONF += --without-openssl
> +endif
> +
> ifdef PTXCONF_NET_SNMP_SNMPTRAPD
> NET_SNMP_AUTOCONF += --enable-snmptrapd-subagent
> else
> --
> 1.7.9.5
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2014-03-06 17:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-21 10:06 Bruno Thomsen
2014-02-21 11:42 ` Alexander Dahl
2014-03-06 17:29 ` Michael Olbrich [this message]
2014-03-07 12:25 ` Bruno Thomsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140306172936.GJ32080@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox