From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCHv4] ptxdist getdev: Download dev packages from ${PTXCONF_PROJECT_DEVMIRROR}
Date: Wed, 29 Jan 2014 15:27:55 +0100 [thread overview]
Message-ID: <20140129142755.GB9989@pengutronix.de> (raw)
In-Reply-To: <CAMwGMjzaqiF7OaObYj-dWZ04YbpxOb=z6PFER1itbqDtEB=-PA@mail.gmail.com>
On Fri, Jan 24, 2014 at 01:09:13PM -0500, Jon Ringle wrote:
> On Fri, Jan 24, 2014 at 12:59 PM, <jon@ringle.org> wrote:
> > From: Jon Ringle <jringle@gridpoint.com>
> >
> > This patch allows you to setup a dev package mirror to hold *-dev.tar.gz
> > packages.
> >
> > Upload your *-dev.tar.gz packages to your mirror, then you can avoid
> > rebuilding all your packages by doing:
> >
> > ptxdist getdev
> >
> > Signed-off-by: Jon Ringle <jringle@gridpoint.com>
> > ---
> > bin/ptxdist | 5 +++++
> > rules/post/ptxd_make_world_get.make | 9 +++++++++
> > rules/project-name.in | 9 +++++++++
> > scripts/lib/ptxd_lib_dgen.awk | 7 +++++++
> > scripts/lib/ptxd_make_get.sh | 15 ++++++++-------
> > 5 files changed, 38 insertions(+), 7 deletions(-)
> >
> > diff --git a/bin/ptxdist b/bin/ptxdist
> > index f9cbdec..663c41e 100755
> > --- a/bin/ptxdist
> > +++ b/bin/ptxdist
> > @@ -1789,6 +1789,11 @@ EOF
> > fi
> > exit
> > ;;
> > + getdev)
> > + check_premake &&
> > + ptxd_make_log getdev
> > + exit
> > + ;;
> > go|images)
> > do_${cmd}
> > exit
> > diff --git a/rules/post/ptxd_make_world_get.make b/rules/post/ptxd_make_world_get.make
> > index 152674c..b99102f 100644
> > --- a/rules/post/ptxd_make_world_get.make
> > +++ b/rules/post/ptxd_make_world_get.make
> > @@ -26,6 +26,11 @@ $(SRCDIR)/%:
> > @$(call targetinfo)
> > @$(call get, $($@))
> >
> > +ifneq ($(call remove_quotes, $(PTXCONF_PROJECT_DEVPKGDIR)),)
> > +$(call remove_quotes, $(PTXCONF_PROJECT_DEVPKGDIR))/%-dev.tar.gz:
> > + @$(call targetinfo)
> > + @$(call getdev, $@)
> > +endif
> >
> > $(STATEDIR)/%.get:
> > @$(call targetinfo)
> > @@ -59,4 +64,8 @@ get = \
> > check_src = \
> > ptxd_make_check_src "$($(strip $(1))_SOURCE)" "$($(strip $(1))_MD5)"
> >
> > +getdev = \
> > + ptxd_make_get_nofail=y \
> > + ptxd_make_get "$(strip $(1))" "$(call remove_quotes, $(PTXCONF_PROJECT_DEVMIRROR))/$(notdir $(1))"
> > +
> > # vim: syntax=make
> > diff --git a/rules/project-name.in b/rules/project-name.in
> > index f546458..d1cd09a 100644
> > --- a/rules/project-name.in
> > +++ b/rules/project-name.in
> > @@ -180,4 +180,13 @@ config PROJECT_DEVPKGDIR
> > depends on PROJECT_USE_DEVPKGS
> > default "/opt/OSELAS.BSP/${PTXCONF_PROJECT_VENDOR}/OSELAS.BSP-${PTXCONF_PROJECT_VENDOR}-${PTXCONF_PROJECT}${PTXCONF_PROJECT_VERSION}"
> >
> > +config PROJECT_DEVMIRROR
> > + string
> > + prompt "Mirror for pre-build archives"
> > + depends on PROJECT_USE_DEVPKGS
> > + help
> > + Enter a URL where *-dev.tar.gz packages can be downloaded
> > + Use: ptxdist getdev
> > +
> > +
> > endmenu
> > diff --git a/scripts/lib/ptxd_lib_dgen.awk b/scripts/lib/ptxd_lib_dgen.awk
> > index 7f790c9..6cd60e2 100644
> > --- a/scripts/lib/ptxd_lib_dgen.awk
> > +++ b/scripts/lib/ptxd_lib_dgen.awk
> > @@ -241,6 +241,13 @@ function write_deps_pkg_all(this_PKG, this_pkg) {
> > # .get rule
> > #
> > print "$(STATEDIR)/" this_pkg ".get: $(" this_PKG "_SOURCES)" > DGEN_DEPS_POST;
> > + print "ifneq ($(call remove_quotes, $(PTXCONF_PROJECT_DEVMIRROR)),)" > DGEN_DEPS_POST;
> > + print "ifneq ($($(" this_PKG "_DEVPKG)),NO)" > DGEN_DEPS_POST;
> > + print "ifneq ($(" this_PKG "_CFGHASH),)" > DGEN_DEPS_POST;
> > + print "getdev: $(call remove_quotes, $(PTXCONF_PROJECT_DEVPKGDIR))/$(" this_PKG "_DEVPKG)" > DGEN_DEPS_POST;
> > + print "endif" > DGEN_DEPS_POST;
> > + print "endif" > DGEN_DEPS_POST;
> > + print "endif" > DGEN_DEPS_POST;
> > }
> >
> > function write_deps_pkg_active(this_PKG, this_pkg, prefix) {
> > diff --git a/scripts/lib/ptxd_make_get.sh b/scripts/lib/ptxd_make_get.sh
> > index f4d7922..1ce913f 100644
> > --- a/scripts/lib/ptxd_make_get.sh
> > +++ b/scripts/lib/ptxd_make_get.sh
> > @@ -285,7 +285,7 @@ ptxd_make_get() {
> > argv[${#argv[@]}]="${url}"
> > mrd=true
> > ;;
> > - ${PTXCONF_SETUP_PTXMIRROR}/*)
> > + ${PTXCONF_SETUP_PTXMIRROR}/*|${PTXCONF_PROJECT_DEVMIRROR}/*)
>
> I moved this to where you asked me to, but now since mrd is
> conditionally set, it is always replacing PTXCONF_SETUP_PTXMIRROR for
> the DEVMIRROR. When I had it on the previous case in the switch, it
> would not do that. This brings me back to the other issue I'm having
> http://article.gmane.org/gmane.comp.embedded.ptxdist.devel/10980
I've reworked the URL handling and applied your patch with a small change
in ptxd_make_world_get.make. And I've implemented the whitelist.
Can you please test if it works as expexted now?
Michael
> > # if mirror is given us to download, add it, but only once
> > if ! ${mrd}; then
> > argv[${#argv[@]}]="${url}"
> > @@ -397,11 +397,12 @@ ptxd_make_get() {
> > esac
> > done
> >
> > - echo
> > - echo "Could not download package"
> > - echo "URL: ${orig_argv[@]}"
> > - echo
> > - exit 1
> > + if [ "${ptxd_make_get_nofail}" != "y" ]; then
> > + echo
> > + echo "Could not download package"
> > + echo "URL: ${orig_argv[@]}"
> > + echo
> > + exit 1
> > + fi
> > }
> > -
> > export -f ptxd_make_get
> > --
> > 1.7.10.4
> >
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2014-01-29 14:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-24 17:59 jon
2014-01-24 18:09 ` Jon Ringle
2014-01-29 14:27 ` Michael Olbrich [this message]
2014-02-01 20:37 ` Jon Ringle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140129142755.GB9989@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox