mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCHv3] ptxdist getdev: Download dev packages from ${PTXCONF_PROJECT_DEVMIRROR}
Date: Fri, 24 Jan 2014 18:16:38 +0100	[thread overview]
Message-ID: <20140124171638.GA14916@pengutronix.de> (raw)
In-Reply-To: <1390582385-6652-1-git-send-email-jon@ringle.org>

On Fri, Jan 24, 2014 at 11:53:03AM -0500, jon@ringle.org wrote:
> From: Jon Ringle <jringle@gridpoint.com>
> 
> This patch allows you to setup a dev package mirror to hold *-dev.tar.gz
> packages.
> 
> Upload your *-dev.tar.gz packages to your mirror, then you can avoid
> rebuilding all your packages by doing:
> 
> ptxdist getdev
> 
> Signed-off-by: Jon Ringle <jringle@gridpoint.com>
> ---
>  bin/ptxdist                         |    5 +++++
>  rules/post/ptxd_make_world_get.make |    7 +++++++
>  rules/project-name.in               |    9 +++++++++
>  scripts/lib/ptxd_lib_dgen.awk       |    7 +++++++
>  scripts/lib/ptxd_make_get.sh        |   15 ++++++++-------
>  5 files changed, 36 insertions(+), 7 deletions(-)
> 
> diff --git a/bin/ptxdist b/bin/ptxdist
> index f9cbdec..663c41e 100755
> --- a/bin/ptxdist
> +++ b/bin/ptxdist
> @@ -1789,6 +1789,11 @@ EOF
>  			fi
>  			exit
>  			;;
> +		getdev)
> +			check_premake &&
> +			ptxd_make_log getdev
> +			exit
> +			;;
>  		go|images)
>  			do_${cmd}
>  			exit
> diff --git a/rules/post/ptxd_make_world_get.make b/rules/post/ptxd_make_world_get.make
> index 152674c..edbdde9 100644
> --- a/rules/post/ptxd_make_world_get.make
> +++ b/rules/post/ptxd_make_world_get.make
> @@ -26,6 +26,9 @@ $(SRCDIR)/%:
>  	@$(call targetinfo)
>  	@$(call get, $($@))
>  
> +$(call remove_quotes, $(PTXCONF_PROJECT_DEVPKGDIR))/%:
> +	@$(call targetinfo)
> +	@$(call getdev, $@)

You forgot to change this. Please check my other mails.

Michael

>  
>  $(STATEDIR)/%.get:
>  	@$(call targetinfo)
> @@ -59,4 +62,8 @@ get = \
>  check_src = \
>  	ptxd_make_check_src "$($(strip $(1))_SOURCE)" "$($(strip $(1))_MD5)"
>  
> +getdev = \
> +	ptxd_make_get_nofail=y \
> +	ptxd_make_get "$(strip $(1))" "$(call remove_quotes, $(PTXCONF_PROJECT_DEVMIRROR))/$(notdir $(1))"
> +
>  # vim: syntax=make
> diff --git a/rules/project-name.in b/rules/project-name.in
> index f546458..d1cd09a 100644
> --- a/rules/project-name.in
> +++ b/rules/project-name.in
> @@ -180,4 +180,13 @@ config PROJECT_DEVPKGDIR
>  	depends on PROJECT_USE_DEVPKGS
>  	default "/opt/OSELAS.BSP/${PTXCONF_PROJECT_VENDOR}/OSELAS.BSP-${PTXCONF_PROJECT_VENDOR}-${PTXCONF_PROJECT}${PTXCONF_PROJECT_VERSION}"
>  
> +config PROJECT_DEVMIRROR
> +	string
> +	prompt "Mirror for pre-build archives"
> +	depends on PROJECT_USE_DEVPKGS
> +	help
> +	  Enter a URL where *-dev.tar.gz packages can be downloaded
> +	  Use: ptxdist getdev
> +
> +
>  endmenu
> diff --git a/scripts/lib/ptxd_lib_dgen.awk b/scripts/lib/ptxd_lib_dgen.awk
> index 7f790c9..6cd60e2 100644
> --- a/scripts/lib/ptxd_lib_dgen.awk
> +++ b/scripts/lib/ptxd_lib_dgen.awk
> @@ -241,6 +241,13 @@ function write_deps_pkg_all(this_PKG, this_pkg) {
>  	# .get rule
>  	#
>  	print "$(STATEDIR)/" this_pkg ".get: $(" this_PKG "_SOURCES)"	> DGEN_DEPS_POST;
> +	print "ifneq ($(call remove_quotes, $(PTXCONF_PROJECT_DEVMIRROR)),)" > DGEN_DEPS_POST;
> +	print "ifneq ($($(" this_PKG "_DEVPKG)),NO)" > DGEN_DEPS_POST;
> +	print "ifneq ($(" this_PKG "_CFGHASH),)" > DGEN_DEPS_POST;
> +	print "getdev: $(call remove_quotes, $(PTXCONF_PROJECT_DEVPKGDIR))/$(" this_PKG "_DEVPKG)" > DGEN_DEPS_POST;
> +	print "endif" > DGEN_DEPS_POST;
> +	print "endif" > DGEN_DEPS_POST;
> +	print "endif" > DGEN_DEPS_POST;
>  }
>  
>  function write_deps_pkg_active(this_PKG, this_pkg, prefix) {
> diff --git a/scripts/lib/ptxd_make_get.sh b/scripts/lib/ptxd_make_get.sh
> index f4d7922..1ce913f 100644
> --- a/scripts/lib/ptxd_make_get.sh
> +++ b/scripts/lib/ptxd_make_get.sh
> @@ -285,7 +285,7 @@ ptxd_make_get() {
>  			argv[${#argv[@]}]="${url}"
>  			mrd=true
>  			;;
> -		${PTXCONF_SETUP_PTXMIRROR}/*)
> +		${PTXCONF_SETUP_PTXMIRROR}/*|${PTXCONF_PROJECT_DEVMIRROR}/*)
>  			# if mirror is given us to download, add it, but only once
>  			if ! ${mrd}; then
>  				argv[${#argv[@]}]="${url}"
> @@ -397,11 +397,12 @@ ptxd_make_get() {
>  		esac
>  	done
>  
> -	echo
> -	echo "Could not download package"
> -	echo "URL: ${orig_argv[@]}"
> -	echo
> -	exit 1
> +	if [ "${ptxd_make_get_nofail}" != "y" ]; then
> +		echo
> +		echo "Could not download package"
> +		echo "URL: ${orig_argv[@]}"
> +		echo
> +		exit 1
> +	fi
>  }
> -
>  export -f ptxd_make_get
> -- 
> 1.7.10.4
> 
> 
> -- 
> ptxdist mailing list
> ptxdist@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de

      parent reply	other threads:[~2014-01-24 17:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-24 16:53 jon
2014-01-24 16:53 ` [ptxdist] [PATCHv3] pv: version bump 1.1.4 -> 1.4.12 jon
2014-01-24 17:17   ` Michael Olbrich
2014-01-24 17:16 ` Michael Olbrich [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140124171638.GA14916@pengutronix.de \
    --to=m.olbrich@pengutronix.de \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox