From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Date: Thu, 27 Jun 2013 22:10:30 +0200 From: Uwe =?iso-8859-1?Q?Kleine-K=F6nig?= Message-ID: <20130627201030.GH27010@pengutronix.de> References: <20130627073827.GD27010@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Subject: Re: [ptxdist] Ethernet does not work in EFM32 Giant Gecko Reply-To: ptxdist@pengutronix.de List-Id: PTXdist Development Mailing List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: ptxdist-bounces@pengutronix.de Errors-To: ptxdist-bounces@pengutronix.de To: ptxdist@pengutronix.de Hello Joey, I retested ethernet on my board and it doesn't work there either. Probably the problem is the irq controller implemented in the board's FPGA being buggy. I already talked to my contact at Energy Micro about that and they are aware of the problem, just didn't find the time yet to address it. I just pinged the problem. (In the hope this ping works better than the efm32's :-) The workaround is to connect the phy's irq line to a gpio of the Gecko. Then the FPGA is out of the loop. That's how we at Pengutronix did it for our Embedded World demo back then. Best regards Uwe -- = Pengutronix e.K. | Uwe Kleine-K=F6nig | Industrial Linux Solutions | http://www.pengutronix.de/ | -- = ptxdist mailing list ptxdist@pengutronix.de