Re: [ptxdist] [PATCH] strongswan: add package

[Michael Olbrich <m.olbrich@pengutronix.de>]

On Wed, Feb 20, 2013 at 10:22:27PM +0100, Christoph Fritz wrote:
> 
> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
>  rules/strongswan.in   |    9 ++++
>  rules/strongswan.make |  123 +++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 132 insertions(+)
>  create mode 100644 rules/strongswan.in
>  create mode 100644 rules/strongswan.make
> 
> diff --git a/rules/strongswan.in b/rules/strongswan.in
> new file mode 100644
> index 0000000..34ad948
> --- /dev/null
> +++ b/rules/strongswan.in
> @@ -0,0 +1,9 @@
> +## SECTION=networking
> +
> +config STRONGSWAN
> +	bool
> +	prompt "strongswan"
> +	select LIBGMP
> +	select LIBCURL
> +	help
> +	  strongSwan is a complete IPsec implementation.
> diff --git a/rules/strongswan.make b/rules/strongswan.make
> new file mode 100644
> index 0000000..9127ea9
> --- /dev/null
> +++ b/rules/strongswan.make
> @@ -0,0 +1,123 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2013 by Christoph Fritz <chf.fritz@googlemail.com>
> +#
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +# preliminary testing version for strongswan
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_STRONGSWAN) += strongswan
> +
> +#
> +# Paths and names
> +#
> +STRONGSWAN_VERSION	:= 5.0.2
> +STRONGSWAN_MD5		:= 77dc16443fd141f46183d3a4f60986ef
> +STRONGSWAN		:= strongswan-$(STRONGSWAN_VERSION)
> +STRONGSWAN_SUFFIX	:= tar.bz2
> +STRONGSWAN_URL		:= http://download.strongswan.org/$(STRONGSWAN).$(STRONGSWAN_SUFFIX)
> +STRONGSWAN_SOURCE	:= $(SRCDIR)/$(STRONGSWAN).$(STRONGSWAN_SUFFIX)
> +STRONGSWAN_DIR		:= $(BUILDDIR)/$(STRONGSWAN)
> +STRONGSWAN_LICENSE	:= GPL
> +
> +# ----------------------------------------------------------------------------
> +# Get
> +# ----------------------------------------------------------------------------
> +
> +#$(STRONGSWAN_SOURCE):
> +#	@$(call targetinfo)
> +#	@$(call get, STRONGSWAN)

remove the whole section.

> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +#STRONGSWAN_CONF_ENV	:= $(CROSS_ENV)

remove.

> +
> +#
> +# autoconf
> +#
> +STRONGSWAN_CONF_TOOL	:= autoconf
> +STRONGSWAN_CONF_OPT	:= \
	$(CROSS_AUTOCONF_USR) \

break.

> +		--enable-monolithic \
> +		--enable-curl \
> +		--enable-blowfish \
> +		--enable-xauth-eap \
> +		--enable-mediation \
> +		--enable-ccm \
> +		--enable-gcm \
> +		--enable-addrblock \
> +		--enable-unity \
> +		--enable-whitelist \
> +		--enable-error-notify \
> +		--enable-certexpire \
> +		--enable-coupling \
> +		--enable-md4 \
> +		--enable-eap-md5 \
> +		--enable-eap-mschapv2 \
> +		--enable-eap-identity \
> +		--enable-eap-dynamic \
> +		--enable-eap-gtc
> +

remove from here ...

> +#$(STATEDIR)/strongswan.prepare:
> +#	@$(call targetinfo)
> +#	@$(call clean, $(STRONGSWAN_DIR)/config.cache)
> +#	cd $(STRONGSWAN_DIR) && \
> +#		$(STRONGSWAN_PATH) $(STRONGSWAN_ENV) \
> +#		./configure $(STRONGSWAN_CONF_OPT)
> +#	@$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Compile
> +# ----------------------------------------------------------------------------
> +
> +#$(STATEDIR)/strongswan.compile:
> +#	@$(call targetinfo)
> +#	@$(call world/compile, STRONGSWAN)
> +#	@$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +#$(STATEDIR)/strongswan.install:
> +#	@$(call targetinfo)
> +#	@$(call world/install, STRONGSWAN)
> +#	@$(call touch)
> +

... to here

> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/strongswan.targetinstall:
> +	@$(call targetinfo)
> +
> +	@$(call install_init, strongswan)
> +	@$(call install_fixup, strongswan,PRIORITY,optional)
> +	@$(call install_fixup, strongswan,SECTION,base)
> +	@$(call install_fixup, strongswan,AUTHOR,"Christoph Fritz <chf.fritz@googlemail.com>")
> +	@$(call install_fixup, strongswan,DESCRIPTION,missing)
> +
> +	@$(call install_tree, strongswan, 0, 0, $(STRONGSWAN_PKGDIR)/, /)

I havn't tested this yet, but I very much doubt, that you need all files.
So please install the individual programs, libs, etc. with
install_copy/install_lib/etc.

> +
> +	@$(call install_finish, strongswan)
> +
> +	@$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Clean
> +# ----------------------------------------------------------------------------
> +
> +#$(STATEDIR)/strongswan.clean:
> +#	@$(call targetinfo)
> +#	@$(call clean_pkg, STRONGSWAN)

remove.

Michael

> +
> +# vim: syntax=make
> -- 
> 1.7.10.4
> 
> 
> 
> 
> -- 
> ptxdist mailing list
> ptxdist@pengutronix.de
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
ptxdist@pengutronix.de