From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] New package: openldap
Date: Mon, 25 Jun 2012 18:27:28 +0200 [thread overview]
Message-ID: <20120625162728.GB10551@pengutronix.de> (raw)
In-Reply-To: <1340048484-841-1-git-send-email-bernhard@bwalle.de>
On Mon, Jun 18, 2012 at 09:41:24PM +0200, Bernhard Walle wrote:
> Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
> ---
> rules/openldap.in | 54 ++++++++++++++++++
> rules/openldap.make | 155 +++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 Dateien geändert, 209 Zeilen hinzugefügt(+)
> create mode 100644 rules/openldap.in
> create mode 100644 rules/openldap.make
>
> diff --git a/rules/openldap.in b/rules/openldap.in
> new file mode 100644
> index 0000000..2b44127
> --- /dev/null
> +++ b/rules/openldap.in
> @@ -0,0 +1,54 @@
> +## SECTION=networking
> +
> +menuconfig OPENLDAP
> + tristate
> + prompt "openldap "
You're missing some dependencies here. Check with readelf. I'm seeing
several libc libraries and zlib.
> + select OPENSSL if OPENLDAP_TLS_OPENSSL
remove the <space> before the <tab>
> + select GNUTLS if OPENLDAP_TLS_GNUTLS
> + help
> + OpenLDAP Software is an open source implementation of the Lightweight
> + Directory Access Protocol. The suite includes:
> +
> + - slapd: stand-alone LDAP daemon (server)
> + - libraries implementing the LDAP protocol, and
> + - utilities, tools, and sample clients.
> +
> +if OPENLDAP
> +
> +config OPENLDAP_SLAPD
> + bool
> + prompt "slapd support"
> + help
> + Enable/disable building and installation of slapd (the server).
> +
> +config OPENLDAP_THREADS
> + bool
> + prompt "Build with multi-thread support (libldap_r)"
> + help
> + Enables the reentrant version of libldap. When this option is
> + enabled, libldap_r is built and installed. (The non-reentrant version
> + libldap is always installed and built.)
> +
> +choice
> + prompt "TLS/SSL support"
> + depends on OPENLDAP
redundant depends
> +
> + config OPENLDAP_TLS_DISABLED
> + bool "disabled"
> +
> + config OPENLDAP_TLS_OPENSSL
> + bool "openssl"
> +
> + config OPENLDAP_TLS_GNUTLS
> + bool "gnutls"
add spaces to align the '-->'. Same length here and the rest in the choice
prompt.
> +
> +endchoice
> +
> +config OPENLDAP_INSTALL_UTILITIES
> + bool
> + prompt "install utilities"
> + help
> + Installs various utilities: ldapadd, ldapcompare, ldapdelete, ldapexop,
> + ldapmodify, ldapmodrdn, ldappasswd, ldapsearch, ldapurl, ldapwhoami.
> +
> +endif
> diff --git a/rules/openldap.make b/rules/openldap.make
> new file mode 100644
> index 0000000..3739cdc
> --- /dev/null
> +++ b/rules/openldap.make
> @@ -0,0 +1,155 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2012 by Bernhard Walle <bernhard@bwalle.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_OPENLDAP) += openldap
> +
> +#
> +# Paths and names
> +#
> +OPENLDAP_VERSION := 2.4.31
> +OPENLDAP_LIBVERSION := 2.4
> +OPENLDAP_MD5 := 804c6cb5698db30b75ad0ff1c25baefd
> +OPENLDAP := openldap-$(OPENLDAP_VERSION)
> +OPENLDAP_SUFFIX := tgz
> +OPENLDAP_URL := ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/$(OPENLDAP).$(OPENLDAP_SUFFIX)
> +OPENLDAP_SOURCE := $(SRCDIR)/$(OPENLDAP).$(OPENLDAP_SUFFIX)
> +OPENLDAP_DIR := $(BUILDDIR)/$(OPENLDAP)
> +# http://www.openldap.org/software/release/license.html
> +OPENLDAP_LICENSE := OpenLDAP Public License
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +ifdef PTXCONF_OPENLDAP_TLS_GNUTLS
> +OPENLDAP_TLS_CONF_OPT := gnutls
> +endif
> +ifdef PTXCONF_OPENLDAP_TLS_OPENSSL
> +OPENLDAP_TLS_CONF_OPT := openssl
> +endif
> +ifdef PTXCONF_OPENLDAP_TLS_DISABLED
> +OPENLDAP_TLS_CONF_OPT := no
> +endif
I'd prefer
OPENLDAP_TLS_CONF_OPT-$(PTXCONF_OPENLDAP_TLS_GNUTLS) := gnutls
[...]
and use $(OPENLDAP_TLS_CONF_OPT-y) below
Michael
> +
> +#
> +# autoconf
> +#
> +OPENLDAP_CONF_TOOL := autoconf
> +OPENLDAP_CONF_OPT := \
> + $(CROSS_AUTOCONF_USR) \
> + --$(call ptx/endis, PTXCONF_GLOBAL_IPV6)-ipv6 \
> + --enable-syslog \
> + --enable-local \
> + --enable-proctitle \
> + --enable-dynamic \
> + \
> + --$(call ptx/endis, PTXCONF_OPENLDAP_SLAPD)-slapd \
> + --disable-dynacl \
> + --disable-aci \
> + --enable-cleartext \
> + --enable-crypt \
> + --disable-lmpasswd \
> + --disable-spasswd \
> + --disable-modules \
> + --enable-rewrite \
> + --disable-rlookups \
> + --disable-slapi \
> + --disable-slp \
> + --disable-wrappers \
> + \
> + --enable-hdb=no \
> + --enable-dnssrv=no \
> + --enable-bdb=no \
> + --enable-ldap=yes \
> + --enable-mdb=yes \
> + --enable-meta=no \
> + --enable-monitor=yes \
> + --enable-ndb=no \
> + --enable-null=yes \
> + --enable-passwd=yes \
> + --enable-perl=no \
> + --enable-relay=yes \
> + --enable-shell=no \
> + --enable-sock=no \
> + --enable-sql=no \
> + \
> + --enable-overlays=no \
> + \
> + --without-cyrus-sasl \
> + --without-fetch \
> + --with-yielding_select=yes \
> + --$(call ptx/wwo, PTXCONF_OPENLDAP_THREADS)-threads \
> + --with-tls=$(OPENLDAP_TLS_CONF_OPT)
> +
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/openldap.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, openldap)
> + @$(call install_fixup, openldap,PRIORITY,optional)
> + @$(call install_fixup, openldap,SECTION,base)
> + @$(call install_fixup, openldap,AUTHOR,"Bernhard Walle <bernhard@bwalle.de>")
> + @$(call install_fixup, openldap,DESCRIPTION,missing)
> +
> +# slapd
> +
> +ifdef PTXCONF_OPENLDAP_SLAPD
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/libexec/slapd)
> + @$(call install_link, openldap, ../libexec/slapd, /usr/bin/slapacl)
> + @$(call install_link, openldap, ../libexec/slapd, /usr/bin/slapadd)
> + @$(call install_link, openldap, ../libexec/slapd, /usr/bin/slapauth)
> + @$(call install_link, openldap, ../libexec/slapd, /usr/bin/slapcat)
> + @$(call install_link, openldap, ../libexec/slapd, /usr/bin/slapdn)
> + @$(call install_link, openldap, ../libexec/slapd, /usr/bin/slapindex)
> + @$(call install_link, openldap, ../libexec/slapd, /usr/bin/slappasswd)
> + @$(call install_link, openldap, ../libexec/slapd, /usr/bin/slapschema)
> + @$(call install_link, openldap, ../libexec/slapd, /usr/bin/slaptest)
> +endif
> +
> +# libraries
> +
> + @$(call install_lib, openldap, 0, 0, 0644, liblber-$(OPENLDAP_LIBVERSION))
> + @$(call install_lib, openldap, 0, 0, 0644, libldap-$(OPENLDAP_LIBVERSION))
> +ifdef PTXCONF_OPENLDAP_THREADS
> + @$(call install_lib, openldap, 0, 0, 0644, libldap_r-$(OPENLDAP_LIBVERSION))
> +endif
> +
> +# tools
> +
> +ifdef PTXCONF_OPENLDAP_INSTALL_UTILITIES
> + @$(call install_link, openldap, ldapmodify, /usr/bin/ldapadd)
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/bin/ldapcompare)
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/bin/ldapdelete)
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/bin/ldapexop)
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/bin/ldapmodify)
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/bin/ldapmodrdn)
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/bin/ldappasswd)
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/bin/ldapsearch)
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/bin/ldapurl)
> + @$(call install_copy, openldap, 0, 0, 0755, -, /usr/bin/ldapwhoami)
> +endif
> +
> +# configuration files
> +
> + @$(call install_tree, openldap, 0, 0, -, /etc/openldap)
> + @$(call install_alternative, openldap, 0, 0, 0644, /etc/openldap/ldap.conf)
> +
> + @$(call install_finish, openldap)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> --
> 1.7.10.4
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2012-06-25 16:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-18 19:41 Bernhard Walle
2012-06-25 16:27 ` Michael Olbrich [this message]
2012-07-22 12:34 ` Bernhard Walle
2012-07-24 21:10 ` Michael Olbrich
-- strict thread matches above, loose matches on Subject: below --
2012-06-17 11:31 Bernhard Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120625162728.GB10551@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox