* [ptxdist] [PATCH] arptables: Add new packege
@ 2012-05-28 12:42 Bart vdr. Meulen
2012-05-31 14:51 ` Michael Olbrich
0 siblings, 1 reply; 2+ messages in thread
From: Bart vdr. Meulen @ 2012-05-28 12:42 UTC (permalink / raw)
To: ptxdist
From: "Bart vdr. Meulen" <bartvdrmeulen@gmail.com>
Add arptables, an administration tool for arp packet filtering
Signed-off-by: Bart vdr. Meulen <bartvdrmeulen@gmail.com>
---
rules/arptables.in | 33 ++++++++++++++++++
rules/arptables.make | 90 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 123 insertions(+)
create mode 100644 rules/arptables.in
create mode 100644 rules/arptables.make
diff --git a/rules/arptables.in b/rules/arptables.in
new file mode 100644
index 0000000..565d831
--- /dev/null
+++ b/rules/arptables.in
@@ -0,0 +1,33 @@
+## SECTION=networking
+
+menuconfig ARPTABLES
+ tristate
+ prompt "arptables"
+ select KERNEL_HEADER
+ help
+ Arptables is used to set up, maintain, and inspect the tables of
+ ARP rules in the Linux kernel. It is analogous to iptables,
+ but operates at the ARP layer rather than the IP layer.
+
+if ARPTABLES
+
+config ARPTABLES_INSTALL_ARPTABLES
+ bool "install arptables"
+ help
+ install the arptables command
+
+config ARPTABLES_INSTALL_ARPTABLES_RESTORE
+ bool "install arptables-restore"
+ help
+ The arptables-restore command is used to restore
+ the arptables rule-set that was saved with the
+ arptables-save command.
+
+config ARPTABLES_INSTALL_ARPTABLES_SAVE
+ bool "install arptables-save"
+ help
+ The arptables-save command is a tool to save
+ the current rule-set into a file that
+ arptables-restore can use.
+
+endif
diff --git a/rules/arptables.make b/rules/arptables.make
new file mode 100644
index 0000000..97b06ed
--- /dev/null
+++ b/rules/arptables.make
@@ -0,0 +1,90 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Bart vdr. Meulen <bartvdrmeulen@gmail.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_ARPTABLES) += arptables
+
+#
+# Paths and names
+#
+ARPTABLES_VERSION := 0.0.3-4
+ARPTABLES_MD5 := 1d4ab05761f063b0751645d8f2b8f8e5
+ARPTABLES := arptables-v$(ARPTABLES_VERSION)
+ARPTABLES_SUFFIX := tar.gz
+ARPTABLES_URL := $(PTXCONF_SETUP_SFMIRROR)/ebtables/arptables/arptables-v0.0.3/$(ARPTABLES).$(ARPTABLES_SUFFIX)
+ARPTABLES_SOURCE := $(SRCDIR)/$(ARPTABLES).$(ARPTABLES_SUFFIX)
+ARPTABLES_DIR := $(BUILDDIR)/$(ARPTABLES)
+ARPTABLES_LICENSE := GPLv2
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(ARPTABLES_SOURCE):
+ @$(call targetinfo)
+ @$(call get, ARPTABLES)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+ARPTABLES_CONF_TOOL := NO
+ARPTABLES_MAKE_OPT := \
+ $(CROSS_ENV_CFLAGS) \
+ $(CROSS_ENV_CPPFLAGS) \
+ $(CROSS_ENV_LDFLAGS) \
+ $(CROSS_ENV_CC) \
+ KERNEL_DIR=$(KERNEL_HEADERS_DIR)
+ARPTABLES_INSTALL_OPT := \
+ PREFIX=/usr install
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/arptables.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, arptables)
+ @$(call install_fixup, arptables,PRIORITY,optional)
+ @$(call install_fixup, arptables,SECTION,base)
+ @$(call install_fixup, arptables,AUTHOR,"Bart vdr. Meulen <bartvdrmeulen@gmail.com>")
+ @$(call install_fixup, arptables,DESCRIPTION,missing)
+
+ifdef PTXCONF_ARPTABLES_INSTALL_ARPTABLES
+ @$(call install_copy, arptables, 0, 0, 0755, -, \
+ /usr/sbin/arptables)
+endif
+
+ifdef PTXCONF_ARPTABLES_INSTALL_ARPTABLES_SAVE
+ @$(call install_copy, arptables, 0, 0, 0755, -, \
+ /usr/sbin/arptables-save)
+endif
+
+ifdef PTXCONF_ARPTABLES_INSTALL_ARPTABLES_RESTORE
+ @$(call install_copy, arptables, 0, 0, 0755, -, \
+ /usr/sbin/arptables-restore)
+endif
+
+ @$(call install_finish, arptables)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/arptables.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, ARPTABLES)
+
+# vim: syntax=make
--
1.7.9.5
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ptxdist] [PATCH] arptables: Add new packege
2012-05-28 12:42 [ptxdist] [PATCH] arptables: Add new packege Bart vdr. Meulen
@ 2012-05-31 14:51 ` Michael Olbrich
0 siblings, 0 replies; 2+ messages in thread
From: Michael Olbrich @ 2012-05-31 14:51 UTC (permalink / raw)
To: ptxdist
On Mon, May 28, 2012 at 02:42:45PM +0200, Bart vdr. Meulen wrote:
> From: "Bart vdr. Meulen" <bartvdrmeulen@gmail.com>
>
> Add arptables, an administration tool for arp packet filtering
>
> Signed-off-by: Bart vdr. Meulen <bartvdrmeulen@gmail.com>
> ---
> rules/arptables.in | 33 ++++++++++++++++++
> rules/arptables.make | 90 ++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 123 insertions(+)
> create mode 100644 rules/arptables.in
> create mode 100644 rules/arptables.make
>
> diff --git a/rules/arptables.in b/rules/arptables.in
> new file mode 100644
> index 0000000..565d831
> --- /dev/null
> +++ b/rules/arptables.in
> @@ -0,0 +1,33 @@
> +## SECTION=networking
> +
> +menuconfig ARPTABLES
> + tristate
> + prompt "arptables"
> + select KERNEL_HEADER
> + help
> + Arptables is used to set up, maintain, and inspect the tables of
> + ARP rules in the Linux kernel. It is analogous to iptables,
> + but operates at the ARP layer rather than the IP layer.
> +
> +if ARPTABLES
> +
> +config ARPTABLES_INSTALL_ARPTABLES
> + bool "install arptables"
> + help
> + install the arptables command
> +
> +config ARPTABLES_INSTALL_ARPTABLES_RESTORE
> + bool "install arptables-restore"
> + help
> + The arptables-restore command is used to restore
> + the arptables rule-set that was saved with the
> + arptables-save command.
> +
> +config ARPTABLES_INSTALL_ARPTABLES_SAVE
> + bool "install arptables-save"
> + help
> + The arptables-save command is a tool to save
> + the current rule-set into a file that
> + arptables-restore can use.
Hmmm, one option for both I think. One without the other doesn't realy make
sense, right?
How big are these tools? For small tools without extra dependencies I'd say
jut install it without an extra option.
> +
> +endif
> diff --git a/rules/arptables.make b/rules/arptables.make
> new file mode 100644
> index 0000000..97b06ed
> --- /dev/null
> +++ b/rules/arptables.make
> @@ -0,0 +1,90 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2011 by Bart vdr. Meulen <bartvdrmeulen@gmail.com>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_ARPTABLES) += arptables
> +
> +#
> +# Paths and names
> +#
> +ARPTABLES_VERSION := 0.0.3-4
> +ARPTABLES_MD5 := 1d4ab05761f063b0751645d8f2b8f8e5
> +ARPTABLES := arptables-v$(ARPTABLES_VERSION)
> +ARPTABLES_SUFFIX := tar.gz
> +ARPTABLES_URL := $(PTXCONF_SETUP_SFMIRROR)/ebtables/arptables/arptables-v0.0.3/$(ARPTABLES).$(ARPTABLES_SUFFIX)
> +ARPTABLES_SOURCE := $(SRCDIR)/$(ARPTABLES).$(ARPTABLES_SUFFIX)
> +ARPTABLES_DIR := $(BUILDDIR)/$(ARPTABLES)
> +ARPTABLES_LICENSE := GPLv2
> +
> +# ----------------------------------------------------------------------------
> +# Get
> +# ----------------------------------------------------------------------------
> +
> +$(ARPTABLES_SOURCE):
> + @$(call targetinfo)
> + @$(call get, ARPTABLES)
remove
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +ARPTABLES_CONF_TOOL := NO
> +ARPTABLES_MAKE_OPT := \
> + $(CROSS_ENV_CFLAGS) \
> + $(CROSS_ENV_CPPFLAGS) \
> + $(CROSS_ENV_LDFLAGS) \
> + $(CROSS_ENV_CC) \
> + KERNEL_DIR=$(KERNEL_HEADERS_DIR)
> +ARPTABLES_INSTALL_OPT := \
> + PREFIX=/usr install
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/arptables.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, arptables)
> + @$(call install_fixup, arptables,PRIORITY,optional)
> + @$(call install_fixup, arptables,SECTION,base)
> + @$(call install_fixup, arptables,AUTHOR,"Bart vdr. Meulen <bartvdrmeulen@gmail.com>")
> + @$(call install_fixup, arptables,DESCRIPTION,missing)
> +
> +ifdef PTXCONF_ARPTABLES_INSTALL_ARPTABLES
> + @$(call install_copy, arptables, 0, 0, 0755, -, \
> + /usr/sbin/arptables)
> +endif
> +
> +ifdef PTXCONF_ARPTABLES_INSTALL_ARPTABLES_SAVE
> + @$(call install_copy, arptables, 0, 0, 0755, -, \
> + /usr/sbin/arptables-save)
> +endif
> +
> +ifdef PTXCONF_ARPTABLES_INSTALL_ARPTABLES_RESTORE
> + @$(call install_copy, arptables, 0, 0, 0755, -, \
> + /usr/sbin/arptables-restore)
> +endif
> +
> + @$(call install_finish, arptables)
> +
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Clean
> +# ----------------------------------------------------------------------------
> +
> +#$(STATEDIR)/arptables.clean:
> +# @$(call targetinfo)
> +# @$(call clean_pkg, ARPTABLES)
remove
Michael
> +
> +# vim: syntax=make
> --
> 1.7.9.5
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-05-31 14:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-28 12:42 [ptxdist] [PATCH] arptables: Add new packege Bart vdr. Meulen
2012-05-31 14:51 ` Michael Olbrich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox