From: Michael Olbrich <m.olbrich@pengutronix.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH v4] replace umkimage by u-boot sources
Date: Wed, 1 Feb 2012 09:55:22 +0100 [thread overview]
Message-ID: <20120201085522.GG32382@pengutronix.de> (raw)
In-Reply-To: <1328050145-14510-1-git-send-email-andreas@biessmann.de>
On Tue, Jan 31, 2012 at 11:49:05PM +0100, Andreas Bießmann wrote:
> This patch removes the forked mkimage u-boot tool and uses the mainline
> u-boot code to build this tool.
Looks good now. I'll apply it once the 2012.02 release is out.
Michael
> Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
> ---
> Changes since v1:
> * add ROOTFS_FW_ENV_CONFIG parameter which installes /etc/fw_env.config
> * changes requested by Michael
>
> Changes since v2:
> * fix wrong 'fw_saveenv' command -> use correct 'fw_setenv'
>
> Changes since v3:
> * install host-u-boot-tools into $(HOST_U_BOOT_TOOLS_PKGDIR) rather than
> into $(PTXCONF_SYSROOT_HOST)
> * remove /etc/fw_env.config from rootfs.{in|make} and install with
> u-boot-tools
> * remove get for u-boot-tools
> * install u-boot-tools into $(U_BOOT_TOOLS_PKGDIR) before packaging
> .. but use /usr/bin/mkimage and /usr/sbin/fw_printenv cause mkimage
> may be used by normal users (Michael requested to install both into
> /usr/sbin, but most distros use /usr/bin for mkimage)
> * add a generic/etc/fw_env.config with all comments but no function
> additionally give some hints in help text for CONFIG_U_BOOT_TOOLS_TOOL_ENV
>
> generic/etc/fw_env.config | 19 +++++
> ...f8dcdbe5c690c-compiler.h-add-uint-typedef.patch | 26 ------
> patches/u-boot-mkimage-2010.03-1/series | 1 -
> platforms/hosttools.in | 2 +-
> platforms/image_uimage.in | 8 +-
> platforms/kernel.in | 2 +-
> rules/host-u-boot-tools.in | 5 +
> rules/host-u-boot-tools.make | 35 ++++++++
> rules/host-umkimage.in | 8 --
> rules/host-umkimage.make | 37 ---------
> rules/templates/template-kernel-in | 2 +-
> rules/u-boot-tools.in | 36 +++++++++
> rules/u-boot-tools.make | 82 ++++++++++++++++++++
> rules/umkimage.in | 8 --
> rules/umkimage.make | 66 ----------------
> 15 files changed, 184 insertions(+), 153 deletions(-)
> create mode 100644 generic/etc/fw_env.config
> delete mode 100644 patches/u-boot-mkimage-2010.03-1/b050c72d52c4e30d5b978ab6758f8dcdbe5c690c-compiler.h-add-uint-typedef.patch
> delete mode 100644 patches/u-boot-mkimage-2010.03-1/series
> create mode 100644 rules/host-u-boot-tools.in
> create mode 100644 rules/host-u-boot-tools.make
> delete mode 100644 rules/host-umkimage.in
> delete mode 100644 rules/host-umkimage.make
> create mode 100644 rules/u-boot-tools.in
> create mode 100644 rules/u-boot-tools.make
> delete mode 100644 rules/umkimage.in
> delete mode 100644 rules/umkimage.make
>
> diff --git a/generic/etc/fw_env.config b/generic/etc/fw_env.config
> new file mode 100644
> index 0000000..bc6890d
> --- /dev/null
> +++ b/generic/etc/fw_env.config
> @@ -0,0 +1,19 @@
> +# Configuration file for fw_(printenv/saveenv) utility.
> +# Up to two entries are valid, in this case the redundant
> +# environment sector is assumed present.
> +# Notice, that the "Number of sectors" is ignored on NOR and SPI-dataflash.
> +# Futhermore, if the Flash sector size is ommitted, this value is assumed to
> +# be the same as the Environment size, which is valid for NOR and SPI-dataflash
> +
> +# NOR example
> +# MTD device name Device offset Env. size Flash sector size Number of sectors
> +#/dev/mtd1 0x0000 0x4000 0x4000
> +#/dev/mtd2 0x0000 0x4000 0x4000
> +
> +# MTD SPI-dataflash example
> +# MTD device name Device offset Env. size Flash sector size Number of sectors
> +#/dev/mtd5 0x4200 0x4200
> +#/dev/mtd6 0x4200 0x4200
> +
> +# NAND example
> +#/dev/mtd0 0x4000 0x4000 0x20000 2
> diff --git a/patches/u-boot-mkimage-2010.03-1/b050c72d52c4e30d5b978ab6758f8dcdbe5c690c-compiler.h-add-uint-typedef.patch b/patches/u-boot-mkimage-2010.03-1/b050c72d52c4e30d5b978ab6758f8dcdbe5c690c-compiler.h-add-uint-typedef.patch
> deleted file mode 100644
> index f20a663..0000000
> --- a/patches/u-boot-mkimage-2010.03-1/b050c72d52c4e30d5b978ab6758f8dcdbe5c690c-compiler.h-add-uint-typedef.patch
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -commit b050c72d52c4e30d5b978ab6758f8dcdbe5c690c
> -Author: Mike Frysinger <vapier@gentoo.org>
> -Date: Tue Apr 20 05:49:30 2010 -0400
> -
> - compiler.h: add uint typedef
> -
> - Recent crc changes started using the "uint" type in headers that are used
> - on the build system. This subsequently broke mingw targets as they do not
> - provide such a type. So add this basic typedef to compiler.h so that we
> - do not have to worry about this breaking again in the future.
> -
> - Signed-off-by: Mike Frysinger <vapier@gentoo.org>
> - Signed-off-by: Remy Bohmer <linux@bohmer.net>
> -
> -diff --git a/include/compiler.h b/include/compiler.h
> -index 332618e..8030bf6 100644
> ---- a/include/compiler.h
> -+++ b/include/compiler.h
> -@@ -55,6 +55,7 @@ typedef unsigned int uint;
> - typedef uint8_t __u8;
> - typedef uint16_t __u16;
> - typedef uint32_t __u32;
> -+typedef unsigned int uint;
> -
> - #define uswap_16(x) \
> - ((((x) & 0xff00) >> 8) | \
> diff --git a/patches/u-boot-mkimage-2010.03-1/series b/patches/u-boot-mkimage-2010.03-1/series
> deleted file mode 100644
> index dbf4bb4..0000000
> --- a/patches/u-boot-mkimage-2010.03-1/series
> +++ /dev/null
> @@ -1 +0,0 @@
> -b050c72d52c4e30d5b978ab6758f8dcdbe5c690c-compiler.h-add-uint-typedef.patch
> diff --git a/platforms/hosttools.in b/platforms/hosttools.in
> index 155b30b..e9ce0fc 100644
> --- a/platforms/hosttools.in
> +++ b/platforms/hosttools.in
> @@ -19,7 +19,7 @@ source "rules/host-mtd-utils.in"
> source "rules/host-mtools.in"
> source "rules/host-openssl.in"
> source "rules/host-squashfs-tools.in"
> -source "rules/host-umkimage.in"
> +source "rules/host-u-boot-tools.in"
> source "rules/host-util-linux-ng.in"
> source "rules/host-xl-tools.in"
> source "rules/host-xz.in"
> diff --git a/platforms/image_uimage.in b/platforms/image_uimage.in
> index 62119c4..719793d 100644
> --- a/platforms/image_uimage.in
> +++ b/platforms/image_uimage.in
> @@ -3,7 +3,7 @@
> menuconfig IMAGE_UIMAGE
> bool
> prompt "Generate images/uRamdisk "
> - select HOST_UMKIMAGE
> + select HOST_U_BOOT_TOOLS
> select IMAGE_EXT2
> select IMAGE_EXT2_GZIP
> help
> @@ -21,16 +21,16 @@ config IMAGE_UIMAGE_NAME
> config IMAGE_UIMAGE_EXTRA_ARGS
> string
> default ""
> - prompt "extra arguments passed to umkimage"
> + prompt "extra arguments passed to mkimage"
> help
> - If needed you can add extra arguments for umkimage here
> + If needed you can add extra arguments for mkimage here
> (e.g. -a 0xaa00000 -e 0xaa00000 )
>
> # TODO: See comment in rules/post/images.make for this topic
> #config IMAGE_UIMAGE_MULTI
> # bool
> # prompt "Generate a multi image images/muimage"
> -# select HOST_UMKIMAGE
> +# select HOST_U_BOOT_TOOLS
> # select KERNEL
> # select IMAGE_CPIO
> # help
> diff --git a/platforms/kernel.in b/platforms/kernel.in
> index b601284..01b31d3 100644
> --- a/platforms/kernel.in
> +++ b/platforms/kernel.in
> @@ -2,7 +2,7 @@ menuconfig KERNEL
> bool
> default y
> select IMAGE_KERNEL
> - select HOST_UMKIMAGE if KERNEL_IMAGE_U
> + select HOST_U_BOOT_TOOLS if KERNEL_IMAGE_U
> select HOST_XZ if KERNEL_XZ
> select HOST_LZOP if KERNEL_LZOP
> select CROSS_MODULE_INIT_TOOLS if KERNEL_MODULES
> diff --git a/rules/host-u-boot-tools.in b/rules/host-u-boot-tools.in
> new file mode 100644
> index 0000000..c89c04d
> --- /dev/null
> +++ b/rules/host-u-boot-tools.in
> @@ -0,0 +1,5 @@
> +## SECTION=hosttools_noprompt
> +
> +config HOST_U_BOOT_TOOLS
> + tristate
> + default ALLYES
> diff --git a/rules/host-u-boot-tools.make b/rules/host-u-boot-tools.make
> new file mode 100644
> index 0000000..27543f9
> --- /dev/null
> +++ b/rules/host-u-boot-tools.make
> @@ -0,0 +1,35 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2012 by Andreas Bießmann <andreas@biessmann.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +HOST_PACKAGES-$(PTXCONF_HOST_U_BOOT_TOOLS) += host-u-boot-tools
> +
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +HOST_U_BOOT_TOOLS_CONF_TOOL := NO
> +HOST_U_BOOT_TOOLS_MAKE_OPT := tools
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/host-u-boot-tools.install:
> + @$(call targetinfo)
> + install -D $(HOST_U_BOOT_TOOLS_DIR)/tools/mkimage \
> + $(HOST_U_BOOT_TOOLS_PKGDIR)/bin/mkimage
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> diff --git a/rules/host-umkimage.in b/rules/host-umkimage.in
> deleted file mode 100644
> index b2990b8..0000000
> --- a/rules/host-umkimage.in
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -## SECTION=hosttools_noprompt
> -
> -config HOST_UMKIMAGE
> - tristate
> - default ALLYES
> - help
> - umkimage is the U-Boot mkimage command. It is used to create
> - boot images for the U-Boot bootloader.
> diff --git a/rules/host-umkimage.make b/rules/host-umkimage.make
> deleted file mode 100644
> index 6b66e18..0000000
> --- a/rules/host-umkimage.make
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -# -*-makefile-*-
> -#
> -# Copyright (C) 2003-2006 by Pengutronix e.K., Hildesheim, Germany
> -# (C) 2010 by Michael Olbrich <m.olbrich@pengutronix.de>
> -#
> -# See CREDITS for details about who has contributed to this project.
> -#
> -# For further information about the PTXdist project and license conditions
> -# see the README file.
> -#
> -
> -#
> -# We provide this package
> -#
> -HOST_PACKAGES-$(PTXCONF_HOST_UMKIMAGE) += host-umkimage
> -
> -
> -# ----------------------------------------------------------------------------
> -# Prepare
> -# ----------------------------------------------------------------------------
> -
> -HOST_UMKIMAGE_CONF_TOOL := NO
> -HOST_UMKIMAGE_MAKE_OPT := \
> - $(HOST_ENV_CPPFLAGS) \
> - $(HOST_ENV_LDFLAGS) \
> - $(HOST_ENV_CC)
> -
> -# ----------------------------------------------------------------------------
> -# Install
> -# ----------------------------------------------------------------------------
> -
> -$(STATEDIR)/host-umkimage.install:
> - @$(call targetinfo)
> - install $(HOST_UMKIMAGE_DIR)/mkimage $(PTXCONF_SYSROOT_HOST)/bin/mkimage
> - @$(call touch)
> -
> -# vim: syntax=make
> diff --git a/rules/templates/template-kernel-in b/rules/templates/template-kernel-in
> index ae1095b..5019c88 100644
> --- a/rules/templates/template-kernel-in
> +++ b/rules/templates/template-kernel-in
> @@ -4,6 +4,6 @@ config KERNEL_@PACKAGE@
> tristate
> prompt "Linux kernel (@package@)"
> select CROSS_MODULE_INIT_TOOLS
> - #select HOST_UMKIMAGE
> + #select HOST_U_BOOT_TOOLS
> help
> FIXME
> diff --git a/rules/u-boot-tools.in b/rules/u-boot-tools.in
> new file mode 100644
> index 0000000..b02ded5
> --- /dev/null
> +++ b/rules/u-boot-tools.in
> @@ -0,0 +1,36 @@
> +## SECTION=shell_and_console
> +
> +menuconfig U_BOOT_TOOLS
> + tristate
> + prompt "u-boot-tools "
> + help
> + some helpful tools from U-Boot project. Most important tool in
> + this section is mkimage to generate U-Boot boot images.
> +
> +if U_BOOT_TOOLS
> +
> +config U_BOOT_TOOLS_TOOL_MKIMAGE
> + tristate
> + default y
> + prompt "mkimage"
> + help
> + the U-Boot mkimage command is used to create boot images for
> + the U-Boot bootloader.
> +
> +config U_BOOT_TOOLS_TOOL_ENV
> + tristate
> + default n
> + prompt "fw_printenv/fw_setenv"
> + help
> + the U-Boot fw_printenv and fw_setenv commands are used to
> + read and write U-Boot environment /dev/mtdX partitions on
> + target through linux.
> + The tool will require a configuration on target named
> + /etc/fw_env.config. See U-Boot source directory tools/env
> + for detailed description.
> + Choosing this option will install a /etc/fw_env.config to
> + target-fs either from your BSP or a generic one which is
> + likely to not work with your board. Please read the
> + comments in that generic configuration.
> +
> +endif
> diff --git a/rules/u-boot-tools.make b/rules/u-boot-tools.make
> new file mode 100644
> index 0000000..937a49d
> --- /dev/null
> +++ b/rules/u-boot-tools.make
> @@ -0,0 +1,82 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2012 by Andreas Bießmann <andreas@biessmann.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_U_BOOT_TOOLS) += u-boot-tools
> +
> +#
> +# Paths and names
> +#
> +U_BOOT_TOOLS_VERSION := 2011.12
> +U_BOOT_TOOLS_MD5 := 7f29b9f6da44d6e46e988e7561fd1d5f
> +U_BOOT_TOOLS := u-boot-$(U_BOOT_TOOLS_VERSION)
> +U_BOOT_TOOLS_SUFFIX := tar.bz2
> +U_BOOT_TOOLS_URL := http://ftp.denx.de/pub/u-boot/$(U_BOOT_TOOLS).$(U_BOOT_TOOLS_SUFFIX)
> +U_BOOT_TOOLS_SOURCE := $(SRCDIR)/$(U_BOOT_TOOLS).$(U_BOOT_TOOLS_SUFFIX)
> +U_BOOT_TOOLS_DIR := $(BUILDDIR)/$(U_BOOT_TOOLS)
> +U_BOOT_TOOLS_LICENSE := GPLv2
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +U_BOOT_TOOLS_CONF_TOOL := NO
> +U_BOOT_TOOLS_MAKE_OPT := \
> + HOSTCC="$(CROSS_CC)" \
> + HOSTSTRIP="$(CROSS_STRIP)" \
> + tools
> +
> +ifdef PTXCONF_U_BOOT_TOOLS_TOOL_ENV
> +U_BOOT_TOOLS_MAKE_OPT += env
> +endif
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/u-boot-tools.install:
> + @$(call targetinfo)
> + install -D $(U_BOOT_TOOLS_DIR)/tools/mkimage \
> + $(U_BOOT_TOOLS_PKGDIR)/usr/bin/mkimage
> + install -D $(U_BOOT_TOOLS_DIR)/tools/env/fw_printenv \
> + $(U_BOOT_TOOLS_PKGDIR)/usr/sbin/fw_printenv
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/u-boot-tools.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, u-boot-tools)
> + @$(call install_fixup, u-boot-tools,PRIORITY,optional)
> + @$(call install_fixup, u-boot-tools,SECTION,base)
> + @$(call install_fixup, u-boot-tools,AUTHOR,\
> + "Andreas Bießmann <andreas@biessmann.de>")
> + @$(call install_fixup, u-boot-tools,DESCRIPTION,missing)
> +
> +ifdef PTXCONF_U_BOOT_TOOLS_TOOL_MKIMAGE
> + @$(call install_copy, u-boot-tools, 0, 0, 0755, -, /usr/bin/mkimage)
> +endif
> +
> +ifdef PTXCONF_U_BOOT_TOOLS_TOOL_ENV
> + @$(call install_copy, u-boot-tools, 0, 0, 0755, -, /usr/sbin/fw_printenv)
> + @$(call install_link, u-boot-tools, fw_printenv, /usr/sbin/fw_setenv)
> + @$(call install_alternative, u-boot-tools, 0, 0, 0644, /etc/fw_env.config)
> +endif
> +
> + @$(call install_finish, u-boot-tools)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> diff --git a/rules/umkimage.in b/rules/umkimage.in
> deleted file mode 100644
> index ffff541..0000000
> --- a/rules/umkimage.in
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -## SECTION=shell_and_console
> -
> -config UMKIMAGE
> - tristate
> - prompt "umkimage"
> - help
> - umkimage is the U-Boot mkimage command. It is used to create
> - boot images for the U-Boot bootloader.
> diff --git a/rules/umkimage.make b/rules/umkimage.make
> deleted file mode 100644
> index ae5f316..0000000
> --- a/rules/umkimage.make
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -# -*-makefile-*-
> -#
> -# Copyright (C) 2010 by Remy Bohmer <linux@bohmer.net>
> -#
> -# See CREDITS for details about who has contributed to this project.
> -#
> -# For further information about the PTXdist project and license conditions
> -# see the README file.
> -#
> -
> -#
> -# We provide this package
> -#
> -PACKAGES-$(PTXCONF_UMKIMAGE) += umkimage
> -
> -#
> -# Paths and names
> -#
> -UMKIMAGE_VERSION := 2010.03-1
> -UMKIMAGE_MD5 := 5e7b4ed03e855a4824317fc4e3917dba
> -UMKIMAGE := u-boot-mkimage-$(UMKIMAGE_VERSION)
> -UMKIMAGE_SUFFIX := tar.gz
> -UMKIMAGE_URL := http://www.pengutronix.de/software/ptxdist/temporary-src/$(UMKIMAGE).$(UMKIMAGE_SUFFIX)
> -UMKIMAGE_SOURCE := $(SRCDIR)/$(UMKIMAGE).$(UMKIMAGE_SUFFIX)
> -UMKIMAGE_DIR := $(BUILDDIR)/$(UMKIMAGE)
> -UMKIMAGE_LICENSE := GPLv2
> -
> -# ----------------------------------------------------------------------------
> -# Get
> -# ----------------------------------------------------------------------------
> -
> -$(UMKIMAGE_SOURCE):
> - @$(call targetinfo)
> - @$(call get, UMKIMAGE)
> -
> -# ----------------------------------------------------------------------------
> -# Prepare
> -# ----------------------------------------------------------------------------
> -
> -UMKIMAGE_CONF_TOOL := NO
> -UMKIMAGE_MAKE_OPT := \
> - $(CROSS_ENV_CFLAGS) \
> - $(CROSS_ENV_CPPFLAGS) \
> - $(CROSS_ENV_LDFLAGS) \
> - $(CROSS_ENV_CC)
> -
> -# ----------------------------------------------------------------------------
> -# Target-Install
> -# ----------------------------------------------------------------------------
> -
> -$(STATEDIR)/umkimage.targetinstall:
> - @$(call targetinfo)
> -
> - @$(call install_init, umkimage)
> - @$(call install_fixup, umkimage,PRIORITY,optional)
> - @$(call install_fixup, umkimage,SECTION,base)
> - @$(call install_fixup, umkimage,AUTHOR,"Remy Bohmer <linux@bohmer.net>")
> - @$(call install_fixup, umkimage,DESCRIPTION,missing)
> -
> - @$(call install_copy, umkimage, 0, 0, 0755, -, /usr/bin/mkimage)
> -
> - @$(call install_finish, umkimage)
> -
> - @$(call touch)
> -
> -# vim: syntax=make
> --
> 1.7.8.4
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2012-02-01 8:55 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-21 16:59 [ptxdist] [PATCH / RFC] " Andreas Bießmann
2012-01-21 18:22 ` Michael Olbrich
2012-01-21 20:08 ` Bernhard Walle
2012-01-22 9:17 ` Michael Olbrich
2012-01-22 9:58 ` Andreas Bießmann
2012-01-22 10:14 ` Michael Olbrich
2012-01-22 14:49 ` [ptxdist] [PATCH v2] " Andreas Bießmann
2012-01-22 14:57 ` Bernhard Walle
2012-01-23 12:37 ` Andreas Bießmann
2012-01-26 15:06 ` Michael Olbrich
2012-01-26 16:05 ` Andreas Bießmann
2012-01-23 12:40 ` Andreas Bießmann
2012-01-23 13:07 ` Bernhard Walle
2012-01-23 13:16 ` Andreas Bießmann
2012-01-23 13:44 ` Bernhard Walle
2012-01-27 7:17 ` Andreas Bießmann
2012-01-27 23:38 ` [ptxdist] [PATCH v3] " Andreas Bießmann
2012-01-31 14:50 ` Michael Olbrich
2012-01-31 22:49 ` [ptxdist] [PATCH v4] " Andreas Bießmann
2012-02-01 8:55 ` Michael Olbrich [this message]
2012-03-12 9:00 ` Andreas Bießmann
2012-03-12 10:46 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120201085522.GG32382@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox