From: Christian Melki <christian.melki@t2data.com>
To: ptxdist@pengutronix.de, Michael Riesch <michael.riesch@wolfvision.net>
Cc: michael.tretter@pengutronix.de
Subject: Re: [ptxdist] [PATCH 2/3] add package for rockchip firmware binaries
Date: Fri, 3 Dec 2021 18:55:01 +0100 [thread overview]
Message-ID: <179e3e9a-8e4a-8765-fe24-c914bbe3ae7f@t2data.com> (raw)
In-Reply-To: <20211203165440.1180588-3-michael.riesch@wolfvision.net>
Hi.
Good idea with a non-free firmware section.
But these Rockchip things looks like they are highly board/project
dependent.
A non-JEDEC timing named DDR-blob? For what board?
RK3566/8 are SoCs afaiu, not complete system implementations?
Also, ARM Trustzone blobs can also be very project specific?
Regards,
Christian
On 12/3/21 17:54, Michael Riesch wrote:
> Rockchip provides the SDRAM initialization as well as BL31/BL32
> firmware for their SoCs in binary from. Add a package that downloads
> those binaries for further use in e.g., barebox.
>
> Signed-off-by: Michael Tretter <michael.tretter@pengutronix.de>
> [revised and extended Kconfig]
> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
> ---
> platforms/firmware-rockchip.in | 35 ++++++++++++++++
> rules/firmware-rockchip.make | 75 ++++++++++++++++++++++++++++++++++
> 2 files changed, 110 insertions(+)
> create mode 100644 platforms/firmware-rockchip.in
> create mode 100644 rules/firmware-rockchip.make
>
> diff --git a/platforms/firmware-rockchip.in b/platforms/firmware-rockchip.in
> new file mode 100644
> index 000000000..3b7c996bb
> --- /dev/null
> +++ b/platforms/firmware-rockchip.in
> @@ -0,0 +1,35 @@
> +## SECTION=non_free_firmware
> +
> +menuconfig FIRMWARE_ROCKCHIP
> + bool
> + prompt "Rockchip firmware binaries "
> + help
> + Rockchip prebuilt SDRAM initialization and TF-A binaries.
> +
> +if FIRMWARE_ROCKCHIP
> +
> +config FIRMWARE_ROCKCHIP_RK3566_SDRAM
> + bool
> + prompt "RK3566 SDRAM init"
> + help
> + Rockchip RK3566 SDRAM initialization binary.
> +
> +config FIRMWARE_ROCKCHIP_RK3568_SDRAM
> + bool
> + prompt "RK3568 SDRAM init"
> + help
> + Rockchip RK3568 SDRAM initialization binary.
> +
> +config FIRMWARE_ROCKCHIP_RK356x_BL31
> + bool
> + prompt "RK356x BL31 binary"
> + help
> + Rockchip RK3566/RK3568 BL31 binary.
> +
> +config FIRMWARE_ROCKCHIP_RK356x_BL32
> + bool
> + prompt "RK356x BL32 binary"
> + help
> + Rockchip RK3566/RK3568 BL32 binary.
> +
> +endif
> diff --git a/rules/firmware-rockchip.make b/rules/firmware-rockchip.make
> new file mode 100644
> index 000000000..54a0b7493
> --- /dev/null
> +++ b/rules/firmware-rockchip.make
> @@ -0,0 +1,75 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Michael Tretter <m.tretter@pengutronix.de>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_FIRMWARE_ROCKCHIP) += firmware-rockchip
> +
> +FIRMWARE_ROCKCHIP_VERSION := 2021-06-01-g7d631e0d
> +FIRMWARE_ROCKCHIP_MD5 := bfb7b9601b88784e263c2cc6baa5da9f
> +FIRMWARE_ROCKCHIP := firmware-rockchip-$(FIRMWARE_ROCKCHIP_VERSION)
> +FIRMWARE_ROCKCHIP_SUFFIX := tar.xz
> +FIRMWARE_ROCKCHIP_URL := \
> + git://github.com/rockchip-linux/rkbin;tag=$(FIRMWARE_ROCKCHIP_VERSION)
> +FIRMWARE_ROCKCHIP_SOURCE := $(SRCDIR)/$(FIRMWARE_ROCKCHIP).$(FIRMWARE_ROCKCHIP_SUFFIX)
> +FIRMWARE_ROCKCHIP_DIR := $(BUILDDIR)/$(FIRMWARE_ROCKCHIP)
> +FIRMWARE_ROCKCHIP_LICENSE := unknown
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +FIRMWARE_ROCKCHIP_CONF_TOOL:= NO
> +
> +# ----------------------------------------------------------------------------
> +# Compile
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/firmware-rockchip.compile:
> + @$(call targetinfo)
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/firmware-rockchip.install:
> + @$(call targetinfo)
> +
> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK3566_SDRAM
> + install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3566_ddr_1056MHz_v1.08.bin \
> + $(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3566_ddr_1056MHz_v1.08.bin
> +endif
> +
> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK3568_SDRAM
> + install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3568_ddr_1560MHz_v1.08.bin \
> + $(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3568_ddr_1560MHz_v1.08.bin
> +endif
> +
> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK356x_BL31
> + install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3568_bl31_v1.24.elf \
> + $(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3568_bl31_v1.24.elf
> +endif
> +
> +ifdef PTXCONF_FIRMWARE_ROCKCHIP_RK356x_BL32
> + install -v -D -m644 $(FIRMWARE_ROCKCHIP_DIR)/bin/rk35/rk3568_bl32_v1.05.bin \
> + $(FIRMWARE_ROCKCHIP_PKGDIR)/usr/lib/firmware/rk3568_bl32_v1.05.bin
> +endif
> +
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/firmware-rockchip.targetinstall:
> + @$(call targetinfo)
> + @$(call touch)
> +
> +# vim: syntax=make
>
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
To unsubscribe, send a mail with subject "unsubscribe" to ptxdist-request@pengutronix.de
next prev parent reply other threads:[~2021-12-03 17:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-03 16:54 [ptxdist] [PATCH 0/3] Add support for Rockchip firmware blobs Michael Riesch
2021-12-03 16:54 ` [ptxdist] [PATCH 1/3] platforms: add section for non-free " Michael Riesch
2021-12-03 16:54 ` [ptxdist] [PATCH 2/3] add package for rockchip firmware binaries Michael Riesch
2021-12-03 17:55 ` Christian Melki [this message]
2021-12-04 7:10 ` Michael Riesch
2021-12-04 15:37 ` Christian Melki
2021-12-06 6:06 ` Michael Riesch
2021-12-05 0:56 ` Roland Hieber
2021-12-05 1:00 ` Roland Hieber
2021-12-05 9:07 ` Michael Riesch
2021-12-06 6:27 ` Michael Riesch
2021-12-03 16:54 ` [ptxdist] [RFC PATCH 3/3] barebox: add integration of firmware blobs Michael Riesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=179e3e9a-8e4a-8765-fe24-c914bbe3ae7f@t2data.com \
--to=christian.melki@t2data.com \
--cc=michael.riesch@wolfvision.net \
--cc=michael.tretter@pengutronix.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox