* [ptxdist] [PATCH v3] kmscube: add new package
@ 2017-03-16 14:33 Markus Niebel
2017-03-16 14:41 ` Markus Niebel
2017-03-16 14:47 ` Juergen Borleis
0 siblings, 2 replies; 3+ messages in thread
From: Markus Niebel @ 2017-03-16 14:33 UTC (permalink / raw)
To: ptxdist; +Cc: m.olbrich, Markus Niebel
From: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
---
changes since v2:
- handle as single patch, part of original series was applied
- cleanup as suggested
- use version notation as suggested
- fix dependency as suggested
- silence targetinstall
- use new upstream version (needs on patch less)
.../0001-force-autogen-to-look-for-stdc.patch | 29 ++++++++++
patches/kmscube-2017-03-13-g803bac5/autogen.sh | 1 +
patches/kmscube-2017-03-13-g803bac5/series | 2 +
rules/kmscube.in | 9 ++++
rules/kmscube.make | 61 ++++++++++++++++++++++
5 files changed, 102 insertions(+)
create mode 100644 patches/kmscube-2017-03-13-g803bac5/0001-force-autogen-to-look-for-stdc.patch
create mode 120000 patches/kmscube-2017-03-13-g803bac5/autogen.sh
create mode 100644 patches/kmscube-2017-03-13-g803bac5/series
create mode 100644 rules/kmscube.in
create mode 100644 rules/kmscube.make
diff --git a/patches/kmscube-2017-03-13-g803bac5/0001-force-autogen-to-look-for-stdc.patch b/patches/kmscube-2017-03-13-g803bac5/0001-force-autogen-to-look-for-stdc.patch
new file mode 100644
index 0000000..3aa1cb8
--- /dev/null
+++ b/patches/kmscube-2017-03-13-g803bac5/0001-force-autogen-to-look-for-stdc.patch
@@ -0,0 +1,29 @@
+From 3690585109ca98669a9faeadd0c5ecbe1e24dbe0 Mon Sep 17 00:00:00 2001
+From: Markus Niebel <Markus.Niebel@tq-group.com>
+Date: Thu, 2 Mar 2017 17:17:20 +0100
+Subject: [PATCH 1/2] force autogen to look for stdc
+
+needed since sources using constructs needing stdc99
+
+Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
+---
+ configure.ac | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/configure.ac b/configure.ac
+index 4441d2d..2b456d4 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -36,6 +36,9 @@ AM_MAINTAINER_MODE
+ # Enable quiet compiles on automake 1.11.
+ m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+
++AC_PROG_CC
++AC_PROG_CC_STDC
++
+ # Initialize libtool
+ AC_PROG_LIBTOOL
+
+--
+1.9.1
+
diff --git a/patches/kmscube-2017-03-13-g803bac5/autogen.sh b/patches/kmscube-2017-03-13-g803bac5/autogen.sh
new file mode 120000
index 0000000..9f8a4cb
--- /dev/null
+++ b/patches/kmscube-2017-03-13-g803bac5/autogen.sh
@@ -0,0 +1 @@
+../autogen.sh
\ No newline at end of file
diff --git a/patches/kmscube-2017-03-13-g803bac5/series b/patches/kmscube-2017-03-13-g803bac5/series
new file mode 100644
index 0000000..a88c1eb
--- /dev/null
+++ b/patches/kmscube-2017-03-13-g803bac5/series
@@ -0,0 +1,2 @@
+0001-force-autogen-to-look-for-stdc.patch
+# 0002-fix-headers.patch
diff --git a/rules/kmscube.in b/rules/kmscube.in
new file mode 100644
index 0000000..9e4a297
--- /dev/null
+++ b/rules/kmscube.in
@@ -0,0 +1,9 @@
+## SECTION=multimedia_libs
+
+config KMSCUBE
+ bool
+ prompt "kmscube"
+ select MESALIB
+ select LIBDRM
+ help
+ FIXME
diff --git a/rules/kmscube.make b/rules/kmscube.make
new file mode 100644
index 0000000..55095cd
--- /dev/null
+++ b/rules/kmscube.make
@@ -0,0 +1,61 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2017 by Markus Niebel <Markus.Niebel@tq-group.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_KMSCUBE) += kmscube
+
+#
+# Paths and names
+#
+# No tags: use a fake descriptive commit-ish to include the date
+KMSCUBE_VERSION := 2017-03-13-g803bac5
+KMSCUBE := kmscube-$(KMSCUBE_VERSION)
+KMSCUBE_MD5 := 781a59ab2d1d245e99a49df7c3dc1876
+KMSCUBE_URL := git://anongit.freedesktop.org/mesa/kmscube;tag=$(KMSCUBE_VERSION)
+KMSCUBE_SUFFIX := tar.gz
+KMSCUBE_SOURCE := $(SRCDIR)/$(KMSCUBE).$(KMSCUBE_SUFFIX)
+KMSCUBE_DIR := $(BUILDDIR)/$(KMSCUBE)
+
+KMSCUBE_LICENSE := BSD
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+KMSCUBE_CPPFLAGS += \
+ -I$(KERNEL_HEADERS_INCLUDE_DIR)
+
+#
+# autoconf
+#
+KMSCUBE_CONF_TOOL := autoconf
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/kmscube.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, kmscube)
+ @$(call install_fixup, kmscube, PRIORITY, optional)
+ @$(call install_fixup, kmscube, SECTION, base)
+ @$(call install_fixup, kmscube, AUTHOR, "Markus Niebel <Markus.Niebel@tq-group.com>")
+ @$(call install_fixup, kmscube, DESCRIPTION, missing)
+
+ $(call install_copy, kmscube, 0, 0, 0755, -, /usr/bin/kmscube)
+
+ @$(call install_finish, kmscube)
+
+ @$(call touch)
+
+# vim: syntax=make
--
1.9.1
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ptxdist] [PATCH v3] kmscube: add new package
2017-03-16 14:33 [ptxdist] [PATCH v3] kmscube: add new package Markus Niebel
@ 2017-03-16 14:41 ` Markus Niebel
2017-03-16 14:47 ` Juergen Borleis
1 sibling, 0 replies; 3+ messages in thread
From: Markus Niebel @ 2017-03-16 14:41 UTC (permalink / raw)
To: ptxdist; +Cc: m.olbrich, Markus Niebel
Hello,
please ignore, let me fix noisy targetinstall.
BTW: is ## SECTION=multimedia_libs the correct place?
Am Donnerstag, den 16.03.2017, 15:33 +0100 schrieb Markus Niebel:
> From: Markus Niebel <Markus.Niebel@tq-group.com>
>
> Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
> ---
> changes since v2:
>
> - handle as single patch, part of original series was applied
> - cleanup as suggested
> - use version notation as suggested
> - fix dependency as suggested
> - silence targetinstall
> - use new upstream version (needs on patch less)
>
> .../0001-force-autogen-to-look-for-stdc.patch | 29 ++++++++++
> patches/kmscube-2017-03-13-g803bac5/autogen.sh | 1 +
> patches/kmscube-2017-03-13-g803bac5/series | 2 +
> rules/kmscube.in | 9 ++++
> rules/kmscube.make | 61 ++++++++++++++++++++++
> 5 files changed, 102 insertions(+)
> create mode 100644 patches/kmscube-2017-03-13-g803bac5/0001-force-autogen-to-look-for-stdc.patch
> create mode 120000 patches/kmscube-2017-03-13-g803bac5/autogen.sh
> create mode 100644 patches/kmscube-2017-03-13-g803bac5/series
> create mode 100644 rules/kmscube.in
> create mode 100644 rules/kmscube.make
>
> diff --git a/patches/kmscube-2017-03-13-g803bac5/0001-force-autogen-to-look-for-stdc.patch b/patches/kmscube-2017-03-13-g803bac5/0001-force-autogen-to-look-for-stdc.patch
> new file mode 100644
> index 0000000..3aa1cb8
> --- /dev/null
> +++ b/patches/kmscube-2017-03-13-g803bac5/0001-force-autogen-to-look-for-stdc.patch
> @@ -0,0 +1,29 @@
> +From 3690585109ca98669a9faeadd0c5ecbe1e24dbe0 Mon Sep 17 00:00:00 2001
> +From: Markus Niebel <Markus.Niebel@tq-group.com>
> +Date: Thu, 2 Mar 2017 17:17:20 +0100
> +Subject: [PATCH 1/2] force autogen to look for stdc
> +
> +needed since sources using constructs needing stdc99
> +
> +Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
> +---
> + configure.ac | 3 +++
> + 1 file changed, 3 insertions(+)
> +
> +diff --git a/configure.ac b/configure.ac
> +index 4441d2d..2b456d4 100644
> +--- a/configure.ac
> ++++ b/configure.ac
> +@@ -36,6 +36,9 @@ AM_MAINTAINER_MODE
> + # Enable quiet compiles on automake 1.11.
> + m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
> +
> ++AC_PROG_CC
> ++AC_PROG_CC_STDC
> ++
> + # Initialize libtool
> + AC_PROG_LIBTOOL
> +
> +--
> +1.9.1
> +changes since v2:
> diff --git a/patches/kmscube-2017-03-13-g803bac5/autogen.sh b/patches/kmscube-2017-03-13-g803bac5/autogen.sh
> new file mode 120000
> index 0000000..9f8a4cb
> --- /dev/null
> +++ b/patches/kmscube-2017-03-13-g803bac5/autogen.sh
> @@ -0,0 +1 @@
> +../autogen.sh
> \ No newline at end of file
> diff --git a/patches/kmscube-2017-03-13-g803bac5/series b/patches/kmscube-2017-03-13-g803bac5/series
> new file mode 100644
> index 0000000..a88c1eb
> --- /dev/null
> +++ b/patches/kmscube-2017-03-13-g803bac5/series
> @@ -0,0 +1,2 @@
> +0001-force-autogen-to-look-for-stdc.patch
> +# 0002-fix-headers.patch
> diff --git a/rules/kmscube.in b/rules/kmscube.in
> new file mode 100644
> index 0000000..9e4a297
> --- /dev/null
> +++ b/rules/kmscube.in
> @@ -0,0 +1,9 @@
> +## SECTION=multimedia_libs
> +
> +config KMSCUBE
> + bool
> + prompt "kmscube"
> + select MESALIB
> + select LIBDRM
> + help
> + FIXME
> diff --git a/rules/kmscube.make b/rules/kmscube.make
> new file mode 100644
> index 0000000..55095cd
> --- /dev/null
> +++ b/rules/kmscube.make
> @@ -0,0 +1,61 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2017 by Markus Niebel <Markus.Niebel@tq-group.com>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_KMSCUBE) += kmscube
> +
> +#
> +# Paths and names
> +#
> +# No tags: use a fake descriptive commit-ish to include the date
> +KMSCUBE_VERSION := 2017-03-13-g803bac5
> +KMSCUBE := kmscube-$(KMSCUBE_VERSION)
> +KMSCUBE_MD5 := 781a59ab2d1d245e99a49df7c3dc1876
> +KMSCUBE_URL := git://anongit.freedesktop.org/mesa/kmscube;tag=$(KMSCUBE_VERSION)
> +KMSCUBE_SUFFIX := tar.gz
> +KMSCUBE_SOURCE := $(SRCDIR)/$(KMSCUBE).$(KMSCUBE_SUFFIX)
> +KMSCUBE_DIR := $(BUILDDIR)/$(KMSCUBE)
> +
> +KMSCUBE_LICENSE := BSD
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +KMSCUBE_CPPFLAGS += \
> + -I$(KERNEL_HEADERS_INCLUDE_DIR)
> +
> +#
> +# autoconf
> +#
> +KMSCUBE_CONF_TOOL := autoconf
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/kmscube.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, kmscube)
> + @$(call install_fixup, kmscube, PRIORITY, optional)
> + @$(call install_fixup, kmscube, SECTION, base)
> + @$(call install_fixup, kmscube, AUTHOR, "Markus Niebel <Markus.Niebel@tq-group.com>")
> + @$(call install_fixup, kmscube, DESCRIPTION, missing)
> +
> + $(call install_copy, kmscube, 0, 0, 0755, -, /usr/bin/kmscube)
> +
> + @$(call install_finish, kmscube)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ptxdist] [PATCH v3] kmscube: add new package
2017-03-16 14:33 [ptxdist] [PATCH v3] kmscube: add new package Markus Niebel
2017-03-16 14:41 ` Markus Niebel
@ 2017-03-16 14:47 ` Juergen Borleis
1 sibling, 0 replies; 3+ messages in thread
From: Juergen Borleis @ 2017-03-16 14:47 UTC (permalink / raw)
To: ptxdist; +Cc: Markus Niebel, Markus Niebel
On Thursday 16 March 2017 15:33:28 Markus Niebel wrote:
> [...]
> diff --git a/rules/kmscube.in b/rules/kmscube.in
> new file mode 100644
> index 0000000..9e4a297
> --- /dev/null
> +++ b/rules/kmscube.in
> @@ -0,0 +1,9 @@
> +## SECTION=multimedia_libs
> +
> +config KMSCUBE
> + bool
> + prompt "kmscube"
> + select MESALIB
> + select LIBDRM
> + help
> + FIXME
^^^^^ guess what it means...
jb
--
Pengutronix e.K. | Juergen
Borleis |
Industrial Linux Solutions |
http://www.pengutronix.de/ |
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-03-16 14:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-16 14:33 [ptxdist] [PATCH v3] kmscube: add new package Markus Niebel
2017-03-16 14:41 ` Markus Niebel
2017-03-16 14:47 ` Juergen Borleis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox