From: Gavin Schenk <g.schenk@eckelmann.de>
To: ptxdist@pengutronix.de
Cc: Gavin Schenk <g.schenk@eckelmann.de>
Subject: [ptxdist] [PATCH] Add persistant iptable-rules via systemd
Date: Fri, 8 Apr 2016 15:04:10 +0200 [thread overview]
Message-ID: <1460120650-49173-1-git-send-email-g.schenk@eckelmann.de> (raw)
Supports ipv4 and ipv6 and both options can be selected in menuconfig
by IPTABLES_IPV6_SYSTEMD_UNIT and/or IPTABLES_IPV4_SYSTEMD_UNIT
If you select IPTABLES_IPV4_SYSTEMD_UNIT a systemd unit is started on
multiuser.target that set the iptable rules from file:
/etc/iptables/rules.v4
If you select IPTABLES_IPV6_SYSTEMD_UNIT a systemd unit is started on
multiuser.target that set the iptable rules from the file:
/etc/iptables/rules.v6
The Package provides empty files. If you want to add custom rules, you
have to provide your own files. The rule files can be generated with
the utils iptables-save ip6tables-save from the iptables package.
Example:
Generating a rule file, that drops port 5000 on interface eth0 for ipv4
1.) iptables -A INPUT -i eth0 -p TCP --dport 5000 -j DROP
2.) iptables-save > /etc/iptables/rules.v4
The basic idea was taken from https://github.com/gronke/systemd-iptables
written by Stefan Grönke <stefan@gronke.net> in 2015.
Signed-off-by: Gavin Schenk <g.schenk@eckelmann.de>
---
projectroot/etc/iptables/rules.v4 | 0
projectroot/etc/iptables/rules.v6 | 0
projectroot/lib/systemd/system/ip6tables.service | 14 ++++++++++++++
projectroot/lib/systemd/system/iptables.service | 14 ++++++++++++++
projectroot/usr/sbin/ip6tables-flush | 19 +++++++++++++++++++
projectroot/usr/sbin/iptables-flush | 19 +++++++++++++++++++
rules/iptables.in | 10 ++++++++++
rules/iptables.make | 17 +++++++++++++++++
8 files changed, 93 insertions(+)
create mode 100644 projectroot/etc/iptables/rules.v4
create mode 100644 projectroot/etc/iptables/rules.v6
create mode 100644 projectroot/lib/systemd/system/ip6tables.service
create mode 100644 projectroot/lib/systemd/system/iptables.service
create mode 100755 projectroot/usr/sbin/ip6tables-flush
create mode 100755 projectroot/usr/sbin/iptables-flush
diff --git a/projectroot/etc/iptables/rules.v4 b/projectroot/etc/iptables/rules.v4
new file mode 100644
index 0000000..e69de29
diff --git a/projectroot/etc/iptables/rules.v6 b/projectroot/etc/iptables/rules.v6
new file mode 100644
index 0000000..e69de29
diff --git a/projectroot/lib/systemd/system/ip6tables.service b/projectroot/lib/systemd/system/ip6tables.service
new file mode 100644
index 0000000..e842cc1
--- /dev/null
+++ b/projectroot/lib/systemd/system/ip6tables.service
@@ -0,0 +1,14 @@
+[Unit]
+Description=Packet Filtering Framework
+DefaultDependencies=no
+After=systemd-sysctl.service
+Before=sysinit.target
+ConditionFileNotEmpty=/etc/iptables/rules.v6
+[Service]
+Type=oneshot
+ExecStart=/usr/sbin/ip6tables-restore /etc/iptables/rules.v6
+ExecReload=/usr/sbin/ip6tables-restore /etc/iptables/rules.v6
+ExecStop=/usr/sbin/iptables/ip6tables-flush
+RemainAfterExit=yes
+[Install]
+WantedBy=multi-user.target
diff --git a/projectroot/lib/systemd/system/iptables.service b/projectroot/lib/systemd/system/iptables.service
new file mode 100644
index 0000000..fa4a8b3
--- /dev/null
+++ b/projectroot/lib/systemd/system/iptables.service
@@ -0,0 +1,14 @@
+[Unit]
+Description=Packet Filtering Framework
+DefaultDependencies=no
+After=systemd-sysctl.service
+Before=sysinit.target
+ConditionFileNotEmpty=/etc/iptables/rules.v4
+[Service]
+Type=oneshot
+ExecStart=/usr/sbin/iptables-restore /etc/iptables/rules.v4
+ExecReload=/usr/sbin/iptables-restore /etc/iptables/rules.v4
+ExecStop=/usr/sbin/iptables-flush
+RemainAfterExit=yes
+[Install]
+WantedBy=multi-user.target
diff --git a/projectroot/usr/sbin/ip6tables-flush b/projectroot/usr/sbin/ip6tables-flush
new file mode 100755
index 0000000..cf6d22b
--- /dev/null
+++ b/projectroot/usr/sbin/ip6tables-flush
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+if ! ip6tables --list >/dev/null 2>&1; then
+ echo "ipv6 filtering is not supported by the running kernel."
+ exit 3
+fi
+
+ip6tables -F
+ip6tables -X
+ip6tables -Z
+for table in $(</proc/net/ip6_tables_names)
+do
+ ip6tables -t $table -F
+ ip6tables -t $table -X
+ ip6tables -t $table -Z
+done
+ip6tables -P INPUT ACCEPT
+ip6tables -P OUTPUT ACCEPT
+ip6tables -P FORWARD ACCEPT
diff --git a/projectroot/usr/sbin/iptables-flush b/projectroot/usr/sbin/iptables-flush
new file mode 100755
index 0000000..a6e056f
--- /dev/null
+++ b/projectroot/usr/sbin/iptables-flush
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+if ! iptables --list >/dev/null 2>&1; then
+ echo "ipv4 filtering is not supported by the running kernel."
+ exit 3
+fi
+
+iptables -F
+iptables -X
+iptables -Z
+for table in $(</proc/net/ip_tables_names)
+do
+ iptables -t $table -F
+ iptables -t $table -X
+ iptables -t $table -Z
+done
+iptables -P INPUT ACCEPT
+iptables -P FORWARD ACCEPT
+iptables -P OUTPUT ACCEPT
diff --git a/rules/iptables.in b/rules/iptables.in
index e6f3699..8354060 100644
--- a/rules/iptables.in
+++ b/rules/iptables.in
@@ -25,6 +25,16 @@ config IPTABLES_IPV4
bool
prompt "IPv4 support"
+config IPTABLES_IPV6_SYSTEMD_UNIT
+ bool
+ prompt "Activate IPv6 systemd service unit"
+ select IPTABLES_IPV6
+
+config IPTABLES_IPV4_SYSTEMD_UNIT
+ bool
+ prompt "Activate IPv4 systemd service unit"
+ select IPTABLES_IPV4
+
config IPTABLES_LIBIPQ
bool
prompt "Enable libipq"
diff --git a/rules/iptables.make b/rules/iptables.make
index 8a1ea66..3dff774 100644
--- a/rules/iptables.make
+++ b/rules/iptables.make
@@ -126,6 +126,23 @@ ifdef PTXCONF_IPTABLES_IPV4
@$(call install_link, iptables, xtables-multi, /usr/sbin/iptables-restore)
@$(call install_link, iptables, xtables-multi, /usr/sbin/iptables-save)
endif
+
+ifdef PTXCONF_IPTABLES_IPV6_SYSTEMD_UNIT
+# # IPv6 systemd service unit part
+ @$(call install_alternative, iptables, 0, 0, 0644, /etc/iptables/rules.v6)
+ @$(call install_alternative, iptables, 0, 0, 0755, /usr/sbin/ip6tables-flush)
+ @$(call install_alternative, iptables, 0, 0, 0644, /lib/systemd/system/ip6tables.service)
+ @$(call install_link, iptables, ../ip6tables.service, /lib/systemd/system/multi-user.target.wants/ip6tables.service)
+endif
+
+ifdef PTXCONF_IPTABLES_IPV4_SYSTEMD_UNIT
+# # IPv4 systemd service unit part
+ @$(call install_alternative, iptables, 0, 0, 0644, /etc/iptables/rules.v4)
+ @$(call install_alternative, iptables, 0, 0, 0755, /usr/sbin/iptables-flush)
+ @$(call install_alternative, iptables, 0, 0, 0644, /lib/systemd/system/iptables.service)
+ @$(call install_link, iptables, ../iptables.service, /lib/systemd/system/multi-user.target.wants/iptables.service)
+endif
+
endif
ifdef PTXCONF_IPTABLES_INSTALL_IPTABLES_APPLY
--
1.9.1
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next reply other threads:[~2016-04-08 13:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-08 13:04 Gavin Schenk [this message]
2016-04-11 10:00 ` Michael Olbrich
2016-04-11 12:08 ` Schenk, Gavin
2016-04-11 12:44 ` Michael Olbrich
-- strict thread matches above, loose matches on Subject: below --
2016-04-11 12:19 Gavin Schenk
2016-04-11 17:46 ` Uwe Kleine-König
2016-04-12 8:35 ` Michael Olbrich
2016-04-07 12:21 Gavin Schenk
2016-04-07 10:10 Gavin Schenk
2016-04-07 11:59 ` Uwe Kleine-König
2016-04-07 12:24 ` Michael Olbrich
2016-04-07 7:24 Gavin Schenk
2016-04-07 8:11 ` Uwe Kleine-König
2016-04-07 9:14 ` Schenk, Gavin
2016-04-07 9:20 ` Uwe Kleine-König
2016-04-07 9:25 ` Schenk, Gavin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460120650-49173-1-git-send-email-g.schenk@eckelmann.de \
--to=g.schenk@eckelmann.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox