mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Robert Schwebel <r.schwebel@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Robert Schwebel <r.schwebel@pengutronix.de>,
	Steffen Trumtrar <s.trumtrar@pengutronix.de>
Subject: [ptxdist] [PATCH v2] gptp: add new package for IEEE1588
Date: Tue, 16 Feb 2016 20:14:40 +0100	[thread overview]
Message-ID: <1455650080-6859-1-git-send-email-r.schwebel@pengutronix.de> (raw)

This adds the linuxptp project. The original ptxdist rules have been
written by Steffen Trumtrar.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[clean up rules, add license, version bump to 1.6]
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---

v2:
* set prefix to install into /usr instead of /usr/local
* set preefix also on make install
* install_copy from default prefix path

v1:
* initial patch

 projectroot/etc/gPTP.conf | 28 ++++++++++++++++++++
 rules/linuxptp.in         |  9 +++++++
 rules/linuxptp.make       | 67 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 104 insertions(+)
 create mode 100644 projectroot/etc/gPTP.conf
 create mode 100644 rules/linuxptp.in
 create mode 100644 rules/linuxptp.make

diff --git a/projectroot/etc/gPTP.conf b/projectroot/etc/gPTP.conf
new file mode 100644
index 0000000..5bbbaf2
--- /dev/null
+++ b/projectroot/etc/gPTP.conf
@@ -0,0 +1,28 @@
+[global]
+#
+# Run time options
+#
+assume_two_step         1
+logging_level           6
+path_trace_enabled      1
+follow_up_info          1
+tx_timestamp_timeout    40
+use_syslog              1
+verbose                 0
+summary_interval        0
+#
+# Transport options
+#
+transportSpecific       0x1
+ptp_dst_mac             01:80:C2:00:00:0E
+p2p_dst_mac             01:80:C2:00:00:0E
+uds_address             /var/run/ptp4l
+#
+# Default interface options
+#
+network_transport       L2
+delay_mechanism         P2P
+time_stamping           hardware
+
+[eth0]
+
diff --git a/rules/linuxptp.in b/rules/linuxptp.in
new file mode 100644
index 0000000..ca19914
--- /dev/null
+++ b/rules/linuxptp.in
@@ -0,0 +1,9 @@
+## SECTION=networking
+
+config LINUXPTP
+	tristate
+	prompt "linuxptp"
+	help
+	  The Linux PTP project implements the Precision Time protocol (PTP),
+          standardized as IEEE1588.
+
diff --git a/rules/linuxptp.make b/rules/linuxptp.make
new file mode 100644
index 0000000..9125b9f
--- /dev/null
+++ b/rules/linuxptp.make
@@ -0,0 +1,67 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2015 by Steffen Trumtrar <s.trumtrar@pengutronix.de>
+#           (C) 2016 by Robert Schwebel <r.schwebel@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_LINUXPTP) += linuxptp
+
+#
+# Paths and names
+#
+LINUXPTP_VERSION	:= 1.6
+LINUXPTP_MD5		:= 6aa15d83f5a35f1fd076ba9adc4e7285
+LINUXPTP		:= linuxptp-$(LINUXPTP_VERSION)
+LINUXPTP_SUFFIX		:= tgz
+LINUXPTP_URL		:= $(call ptx/mirror, SF, linuxptp/$(LINUXPTP).$(LINUXPTP_SUFFIX))
+LINUXPTP_SOURCE		:= $(SRCDIR)/$(LINUXPTP).$(LINUXPTP_SUFFIX)
+LINUXPTP_DIR		:= $(BUILDDIR)/$(LINUXPTP)
+LINUXPTP_LICENSE	:= GPL-2.0
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+LINUXPTP_CONF_TOOL	:= NO
+LINUXPTP_MAKE_OPT       := \
+	$(CROSS_ENV_PROGS) \
+	prefix=/usr
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+LINUXPTP_INSTALL_OPT	:= prefix=/usr install
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/linuxptp.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, linuxptp)
+	@$(call install_fixup, linuxptp,PRIORITY,optional)
+	@$(call install_fixup, linuxptp,SECTION,base)
+	@$(call install_fixup, linuxptp,AUTHOR,"Steffen Trumtrar <s.trumtrar@pengutronix.de>")
+	@$(call install_fixup, linuxptp,DESCRIPTION,missing)
+
+	@$(call install_copy, linuxptp, 0, 0, 0755, -, /usr/sbin/ptp4l)
+	@$(call install_copy, linuxptp, 0, 0, 0755, -, /usr/sbin/phc2sys)
+	@$(call install_copy, linuxptp, 0, 0, 0755, -, /usr/sbin/pmc)
+	@$(call install_copy, linuxptp, 0, 0, 0755, -, /usr/sbin/hwstamp_ctl)
+	@$(call install_alternative, linuxptp, 0, 0, 0644, /etc/gPTP.conf)
+
+	@$(call install_finish, linuxptp)
+
+	@$(call touch)
+
+# vim: syntax=make
-- 
2.7.0.rc3


_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

                 reply	other threads:[~2016-02-16 19:14 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455650080-6859-1-git-send-email-r.schwebel@pengutronix.de \
    --to=r.schwebel@pengutronix.de \
    --cc=ptxdist@pengutronix.de \
    --cc=s.trumtrar@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox