From: Robert Schwebel <r.schwebel@pengutronix.de>
To: ptxdist@pengutronix.de
Cc: Robert Schwebel <r.schwebel@pengutronix.de>,
Steffen Trumtrar <s.trumtrar@pengutronix.de>
Subject: [ptxdist] [PATCH] gptp: add new package for IEEE1588
Date: Mon, 15 Feb 2016 23:39:32 +0100 [thread overview]
Message-ID: <1455575972-8053-1-git-send-email-r.schwebel@pengutronix.de> (raw)
This adds the linuxptp project. The original ptxdist rules have been
written by Steffen Trumtrar.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[clean up rules, add license, version bump to 1.6]
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
projectroot/etc/gPTP.conf | 28 ++++++++++++++++++++++
rules/linuxptp.in | 9 ++++++++
rules/linuxptp.make | 59 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 96 insertions(+)
create mode 100644 projectroot/etc/gPTP.conf
create mode 100644 rules/linuxptp.in
create mode 100644 rules/linuxptp.make
diff --git a/projectroot/etc/gPTP.conf b/projectroot/etc/gPTP.conf
new file mode 100644
index 0000000..5bbbaf2
--- /dev/null
+++ b/projectroot/etc/gPTP.conf
@@ -0,0 +1,28 @@
+[global]
+#
+# Run time options
+#
+assume_two_step 1
+logging_level 6
+path_trace_enabled 1
+follow_up_info 1
+tx_timestamp_timeout 40
+use_syslog 1
+verbose 0
+summary_interval 0
+#
+# Transport options
+#
+transportSpecific 0x1
+ptp_dst_mac 01:80:C2:00:00:0E
+p2p_dst_mac 01:80:C2:00:00:0E
+uds_address /var/run/ptp4l
+#
+# Default interface options
+#
+network_transport L2
+delay_mechanism P2P
+time_stamping hardware
+
+[eth0]
+
diff --git a/rules/linuxptp.in b/rules/linuxptp.in
new file mode 100644
index 0000000..ca19914
--- /dev/null
+++ b/rules/linuxptp.in
@@ -0,0 +1,9 @@
+## SECTION=networking
+
+config LINUXPTP
+ tristate
+ prompt "linuxptp"
+ help
+ The Linux PTP project implements the Precision Time protocol (PTP),
+ standardized as IEEE1588.
+
diff --git a/rules/linuxptp.make b/rules/linuxptp.make
new file mode 100644
index 0000000..33f20b0
--- /dev/null
+++ b/rules/linuxptp.make
@@ -0,0 +1,59 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2015 by Steffen Trumtrar <s.trumtrar@pengutronix.de>
+# (C) 2016 by Robert Schwebel <r.schwebel@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_LINUXPTP) += linuxptp
+
+#
+# Paths and names
+#
+LINUXPTP_VERSION := 1.6
+LINUXPTP_MD5 := 6aa15d83f5a35f1fd076ba9adc4e7285
+LINUXPTP := linuxptp-$(LINUXPTP_VERSION)
+LINUXPTP_SUFFIX := tgz
+LINUXPTP_URL := $(call ptx/mirror, SF, linuxptp/$(LINUXPTP).$(LINUXPTP_SUFFIX))
+LINUXPTP_SOURCE := $(SRCDIR)/$(LINUXPTP).$(LINUXPTP_SUFFIX)
+LINUXPTP_DIR := $(BUILDDIR)/$(LINUXPTP)
+LINUXPTP_LICENSE := GPL-2.0
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+LINUXPTP_CONF_TOOL := NO
+LINUXPTP_MAKE_OPT := $(CROSS_ENV_PROGS)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/linuxptp.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, linuxptp)
+ @$(call install_fixup, linuxptp,PRIORITY,optional)
+ @$(call install_fixup, linuxptp,SECTION,base)
+ @$(call install_fixup, linuxptp,AUTHOR,"Steffen Trumtrar <s.trumtrar@pengutronix.de>")
+ @$(call install_fixup, linuxptp,DESCRIPTION,missing)
+
+ @$(call install_copy, linuxptp, 0, 0, 0755, $(LINUXPTP_DIR)/ptp4l, /sbin/ptp4l)
+ @$(call install_copy, linuxptp, 0, 0, 0755, $(LINUXPTP_DIR)/phc2sys, /sbin/phc2sys)
+ @$(call install_copy, linuxptp, 0, 0, 0755, $(LINUXPTP_DIR)/pmc, /sbin/pmc)
+ @$(call install_copy, linuxptp, 0, 0, 0755, $(LINUXPTP_DIR)/hwstamp_ctl, /sbin/hwstamp_ctl)
+ @$(call install_alternative, linuxptp, 0, 0, 0644, /etc/gPTP.conf)
+
+ @$(call install_finish, linuxptp)
+
+ @$(call touch)
+
+# vim: syntax=make
--
2.7.0.rc3
_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de
next reply other threads:[~2016-02-15 22:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-15 22:39 Robert Schwebel [this message]
2016-02-16 11:30 ` Michael Olbrich
2016-02-16 11:54 ` Robert Schwebel
2016-02-16 15:16 ` Michael Olbrich
2016-02-16 19:15 ` Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455575972-8053-1-git-send-email-r.schwebel@pengutronix.de \
--to=r.schwebel@pengutronix.de \
--cc=ptxdist@pengutronix.de \
--cc=s.trumtrar@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox