From: Alexander Aring <alex.aring@gmail.com>
To: ptxdist@pengutronix.de
Cc: Alexander Aring <alex.aring@gmail.com>
Subject: [ptxdist] [PATCH] lowpan-tools: replace with wpan-tools
Date: Sun, 14 Dec 2014 13:27:33 +0100 [thread overview]
Message-ID: <1418560053-3549-1-git-send-email-alex.aring@gmail.com> (raw)
This patch removes the actual lowpan-tools for the 802.15.4 stack and
replace it with the wpan-tools. The lowpan-tools are deprecated now, see
http://www.spinics.net/lists/linux-wpan/msg01132.html for more
information. This patch also adds a migrate functionality to replace
LOWPAN_TOOLS with WPAN_TOOLS.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
I am not sure about the migrate functionality. Maybe this could also be
improved because both has the substring "_TOOLS" inside. Nevertheless
this should work.
...0001-izoordinator-Fixes-to-error-handling.patch | 46 --------
.../0002-configure.ac-check-for-python2.x.patch | 28 -----
.../0003-m4-add-py_check_major_version.m4.patch | 40 -------
...c-Check-that-the-python-version-is-indeed.patch | 23 ----
...t-PAN-ID-short-address-and-channel-manual.patch | 122 ---------------------
...z-mac-Handle-return-code-from-set-command.patch | 39 -------
...hon-is-required-only-for-the-serial-tests.patch | 63 -----------
patches/lowpan-tools-0.3/autogen.sh | 11 --
patches/lowpan-tools-0.3/series | 10 --
rules/lowpan-tools.in | 21 ----
rules/lowpan-tools.make | 91 ---------------
rules/wpan-tools.in | 8 ++
rules/wpan-tools.make | 57 ++++++++++
scripts/migrate/migrate_ptx | 8 ++
14 files changed, 73 insertions(+), 494 deletions(-)
delete mode 100644 patches/lowpan-tools-0.3/0001-izoordinator-Fixes-to-error-handling.patch
delete mode 100644 patches/lowpan-tools-0.3/0002-configure.ac-check-for-python2.x.patch
delete mode 100644 patches/lowpan-tools-0.3/0003-m4-add-py_check_major_version.m4.patch
delete mode 100644 patches/lowpan-tools-0.3/0004-configure.ac-Check-that-the-python-version-is-indeed.patch
delete mode 100644 patches/lowpan-tools-0.3/0005-Allow-to-set-PAN-ID-short-address-and-channel-manual.patch
delete mode 100644 patches/lowpan-tools-0.3/0006-iz-mac-Handle-return-code-from-set-command.patch
delete mode 100644 patches/lowpan-tools-0.3/0007-Python-is-required-only-for-the-serial-tests.patch
delete mode 100755 patches/lowpan-tools-0.3/autogen.sh
delete mode 100644 patches/lowpan-tools-0.3/series
delete mode 100644 rules/lowpan-tools.in
delete mode 100644 rules/lowpan-tools.make
create mode 100644 rules/wpan-tools.in
create mode 100644 rules/wpan-tools.make
diff --git a/patches/lowpan-tools-0.3/0001-izoordinator-Fixes-to-error-handling.patch b/patches/lowpan-tools-0.3/0001-izoordinator-Fixes-to-error-handling.patch
deleted file mode 100644
index b290bbf..0000000
--- a/patches/lowpan-tools-0.3/0001-izoordinator-Fixes-to-error-handling.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From: Alan Ott <alan@signal11.us>
-Date: Thu, 5 Apr 2012 00:22:56 -0400
-Subject: [PATCH] izoordinator: Fixes to error handling
-
-Some of the error handling was checking for != 0 on functions which
-return positive values on success.
-
-Signed-off-by: Alan Ott <alan@signal11.us>
----
- src/coordinator.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
-diff --git a/src/coordinator.c b/src/coordinator.c
-index a09633a59eca..c139aae3de31 100644
---- a/src/coordinator.c
-+++ b/src/coordinator.c
-@@ -94,7 +94,8 @@ static int mlme_start(uint16_t short_addr, uint16_t pan, uint8_t channel, uint8_
- nla_put_u8(msg, IEEE802154_ATTR_COORD_REALIGN, 0);
- #endif
- int err = nl_send_auto_complete(nl, msg);
-- log_msg_nl_perror("nl_send_auto_complete", err);
-+ if (err < 0)
-+ log_msg_nl_perror("nl_send_auto_complete", err);
- return 0;
- }
-
-@@ -129,7 +130,8 @@ static int coordinator_associate(struct genlmsghdr *ghdr, struct nlattr **attrs)
-
- int err = nl_send_auto_complete(nl, msg);
-
-- log_msg_nl_perror("nl_send_auto_complete", err);
-+ if (err < 0)
-+ log_msg_nl_perror("nl_send_auto_complete", err);
-
- return 0;
- }
-@@ -408,7 +410,8 @@ int main(int argc, char **argv)
- log_msg_nl_perror("genl_connect", err);
-
- family = genl_ctrl_resolve(nl, IEEE802154_NL_NAME);
-- log_msg_nl_perror("genl_ctrl_resolve", NLE_NOMEM);
-+ if (family < 0)
-+ log_msg_nl_perror("genl_ctrl_resolve", family);
-
- nl_socket_add_membership(nl, nl_get_multicast_id(nl, IEEE802154_NL_NAME, IEEE802154_MCAST_COORD_NAME));
-
diff --git a/patches/lowpan-tools-0.3/0002-configure.ac-check-for-python2.x.patch b/patches/lowpan-tools-0.3/0002-configure.ac-check-for-python2.x.patch
deleted file mode 100644
index 6c67f62..0000000
--- a/patches/lowpan-tools-0.3/0002-configure.ac-check-for-python2.x.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Alexander Aring <alex.aring@googlemail.com>
-Date: Fri, 21 Dec 2012 06:37:14 +0100
-Subject: [PATCH] configure.ac: check for python2.x
-
-Check for python2.x at first.
-
-test_DQ.py works with python2.x only.
-'make install' needs python2.x to generate *.pyc files.
-
-Signed-off-by: Alexander Aring <alex.aring@gmail.com>
----
- configure.ac | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/configure.ac b/configure.ac
-index c483b4ff38de..6c9f54b0ca03 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -77,6 +77,9 @@ AC_PROG_LIBTOOL
- AM_PROG_LEX
- AC_PROG_YACC
- AC_SUBST(LIBTOOL_DEPS)
-+# Currently the scripts works with python2.x only
-+# Check for this at first
-+AC_PATH_PROG(PYTHON, python2 python2.7 python2.6 python2.5 python)
- AM_PATH_PYTHON(,, [:])
- AM_MISSING_PROG(HELP2MAN, help2man, $missing_dir)
-
diff --git a/patches/lowpan-tools-0.3/0003-m4-add-py_check_major_version.m4.patch b/patches/lowpan-tools-0.3/0003-m4-add-py_check_major_version.m4.patch
deleted file mode 100644
index 9232025..0000000
--- a/patches/lowpan-tools-0.3/0003-m4-add-py_check_major_version.m4.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Alan Ott <alan@signal11.us>
-Date: Sun, 17 Mar 2013 18:13:45 -0400
-Subject: [PATCH] m4: add py_check_major_version.m4
-
-Macro to check the Python major version.
-
-This is from stackoverflow user bigleux on page:
- http://stackoverflow.com/questions/4619664/autofoo-test-for-maximum-version-of-python
-
-Signed-off-by: Alan Ott <alan@signal11.us>
----
- m4/py_check_major_version.m4 | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
- create mode 100644 m4/py_check_major_version.m4
-
-diff --git a/m4/py_check_major_version.m4 b/m4/py_check_major_version.m4
-new file mode 100644
-index 000000000000..6d45be8c87a7
---- /dev/null
-+++ b/m4/py_check_major_version.m4
-@@ -0,0 +1,19 @@
-+`# From http://stackoverflow.com/questions/4619664/autofoo-test-for-maximum-version-of-python
-+`# stackoverflow user biegleux
-+
-+`# py_CHECK_MAJOR_VERSION(VARIABLE, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE])`
-+`# ---------------------------------------------------------------------------`
-+`# Run ACTION-IF-TRUE if the VAR has a major version >= VERSION.`
-+`# Run ACTION-IF-FALSE otherwise.`
-+AC_DEFUN([py_CHECK_MAJOR_VERSION],
-+[AC_MSG_CHECKING([whether $1 $$1 major version == $2])
-+case $$1 in
-+$2*)
-+ AC_MSG_RESULT([yes])
-+ ifelse([$3], [$3], [:])
-+ ;;
-+*)
-+ AC_MSG_RESULT([no])
-+ ifelse([$4], , [AC_MSG_ERROR([$$1 differs from $2])], [$4])
-+ ;;
-+esac])
diff --git a/patches/lowpan-tools-0.3/0004-configure.ac-Check-that-the-python-version-is-indeed.patch b/patches/lowpan-tools-0.3/0004-configure.ac-Check-that-the-python-version-is-indeed.patch
deleted file mode 100644
index 96a6ef1..0000000
--- a/patches/lowpan-tools-0.3/0004-configure.ac-Check-that-the-python-version-is-indeed.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: Alan Ott <alan@signal11.us>
-Date: Sun, 17 Mar 2013 18:18:46 -0400
-Subject: [PATCH] configure.ac: Check that the python version is indeed 2
-
-Python 3 breaks all our scripts.
-
-Signed-off-by: Alan Ott <alan@signal11.us>
----
- configure.ac | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/configure.ac b/configure.ac
-index 6c9f54b0ca03..89c265128fdb 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -81,6 +81,7 @@ AC_SUBST(LIBTOOL_DEPS)
- # Check for this at first
- AC_PATH_PROG(PYTHON, python2 python2.7 python2.6 python2.5 python)
- AM_PATH_PYTHON(,, [:])
-+py_CHECK_MAJOR_VERSION([PYTHON_VERSION], [2])
- AM_MISSING_PROG(HELP2MAN, help2man, $missing_dir)
-
- # Checks for libraries.
diff --git a/patches/lowpan-tools-0.3/0005-Allow-to-set-PAN-ID-short-address-and-channel-manual.patch b/patches/lowpan-tools-0.3/0005-Allow-to-set-PAN-ID-short-address-and-channel-manual.patch
deleted file mode 100644
index db40c17..0000000
--- a/patches/lowpan-tools-0.3/0005-Allow-to-set-PAN-ID-short-address-and-channel-manual.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From: Stefan Schmidt <stefan@datenfreihafen.org>
-Date: Wed, 13 Mar 2013 08:25:02 +0100
-Subject: [PATCH] Allow to set PAN ID, short address and channel manually.
-
-This allows setting up a network without a PAN
-coordinator. Necessary if you want to be compatible
-with the contiki implementation.
-
-Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
----
- src/iz-mac.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 91 insertions(+)
-
-diff --git a/src/iz-mac.c b/src/iz-mac.c
-index 7c1e616934e9..be980d6fb3c8 100644
---- a/src/iz-mac.c
-+++ b/src/iz-mac.c
-@@ -253,6 +253,88 @@ static struct iz_cmd_event list_response_event[] = {
- {},
- };
-
-+/******************/
-+/* SET handling */
-+/******************/
-+
-+static iz_res_t set_parse(struct iz_cmd *cmd)
-+{
-+ cmd->flags = NLM_F_REQUEST;
-+ return IZ_CONT_OK;
-+}
-+
-+static iz_res_t set_request(struct iz_cmd *cmd, struct nl_msg *msg)
-+{
-+ char *dummy;
-+ uint16_t pan_id, short_addr;
-+ uint8_t chan;
-+
-+ if (!cmd->argv[1])
-+ return IZ_STOP_ERR;
-+ NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, cmd->argv[1]);
-+
-+ if (!cmd->argv[2])
-+ return IZ_STOP_ERR;
-+ pan_id = strtol(cmd->argv[2], &dummy, 16);
-+ if (*dummy) {
-+ printf("Bad PAN ID!\n");
-+ return IZ_STOP_ERR;
-+ }
-+ NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_PAN_ID, pan_id);
-+
-+ if (!cmd->argv[3])
-+ return IZ_STOP_ERR;
-+ short_addr = strtol(cmd->argv[3], &dummy, 16);
-+ if (*dummy) {
-+ printf("Bad short address!\n");
-+ return IZ_STOP_ERR;
-+ }
-+ NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_SHORT_ADDR, short_addr);
-+
-+ if (!cmd->argv[4])
-+ return IZ_STOP_ERR;
-+ chan = strtol(cmd->argv[4], &dummy, 10);
-+ if (*dummy) {
-+ printf("Bad channel number!\n");
-+ return IZ_STOP_ERR;
-+ }
-+ NLA_PUT_U8(msg, IEEE802154_ATTR_CHANNEL, chan);
-+
-+ /* set all unneeded attributes to 0*/
-+ NLA_PUT_U8(msg, IEEE802154_ATTR_PAN_COORD, 0);
-+ NLA_PUT_U8(msg, IEEE802154_ATTR_BCN_ORD, 0);
-+ NLA_PUT_U8(msg, IEEE802154_ATTR_SF_ORD, 0);
-+ NLA_PUT_U8(msg, IEEE802154_ATTR_BAT_EXT, 0);
-+ NLA_PUT_U8(msg, IEEE802154_ATTR_COORD_REALIGN, 0);
-+
-+ return IZ_CONT_OK;
-+
-+nla_put_failure:
-+ return IZ_STOP_ERR;
-+}
-+
-+static iz_res_t set_response(struct iz_cmd *cmd, struct genlmsghdr *ghdr, struct nlattr **attrs)
-+{
-+ if (!attrs[IEEE802154_ATTR_SHORT_ADDR] ||
-+ !attrs[IEEE802154_ATTR_STATUS] )
-+ return IZ_STOP_ERR;
-+
-+ printf("Set PAN ID %04hx, short address %04hx, status %i\n",
-+ nla_get_u16(attrs[IEEE802154_ATTR_COORD_PAN_ID]),
-+ nla_get_u16(attrs[IEEE802154_ATTR_SHORT_ADDR]),
-+ nla_get_u8(attrs[IEEE802154_ATTR_CHANNEL]));
-+
-+ return IZ_STOP_OK;
-+}
-+
-+static struct iz_cmd_event set_response_event[] = {
-+ {
-+ .call = set_response,
-+ .nl = IEEE802154_START_CONF,
-+ },
-+ {},
-+};
-+
- /************************/
- /* ASSOCIATE handling */
- /************************/
-@@ -473,6 +555,15 @@ const struct iz_module iz_mac = {
- .response = list_response_event,
- .finish = list_finish,
- },
-+ {
-+ .name = "set",
-+ .usage = "<iface> <pan> <addr> <channel>",
-+ .doc = "Set address, channel and pan for an interface.",
-+ .nl_cmd = IEEE802154_START_REQ,
-+ .parse = set_parse,
-+ .request = set_request,
-+ .response = set_response_event,
-+ },
- {}}
- };
-
diff --git a/patches/lowpan-tools-0.3/0006-iz-mac-Handle-return-code-from-set-command.patch b/patches/lowpan-tools-0.3/0006-iz-mac-Handle-return-code-from-set-command.patch
deleted file mode 100644
index 9b07f8a..0000000
--- a/patches/lowpan-tools-0.3/0006-iz-mac-Handle-return-code-from-set-command.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From: Alan Ott <alan@signal11.us>
-Date: Sun, 17 Mar 2013 21:22:52 -0400
-Subject: [PATCH] iz-mac: Handle return code from "set" command
-
-The iz set command will fail if the PAN ID is invalid. Handle this failure.
-
-Signed-off-by: Alan Ott <alan@signal11.us>
----
- src/iz-mac.c | 16 +++++++++-------
- 1 file changed, 9 insertions(+), 7 deletions(-)
-
-diff --git a/src/iz-mac.c b/src/iz-mac.c
-index be980d6fb3c8..838229cecd77 100644
---- a/src/iz-mac.c
-+++ b/src/iz-mac.c
-@@ -315,14 +315,16 @@ nla_put_failure:
-
- static iz_res_t set_response(struct iz_cmd *cmd, struct genlmsghdr *ghdr, struct nlattr **attrs)
- {
-- if (!attrs[IEEE802154_ATTR_SHORT_ADDR] ||
-- !attrs[IEEE802154_ATTR_STATUS] )
-+ uint8_t status;
-+
-+ if (!attrs[IEEE802154_ATTR_STATUS])
- return IZ_STOP_ERR;
--
-- printf("Set PAN ID %04hx, short address %04hx, status %i\n",
-- nla_get_u16(attrs[IEEE802154_ATTR_COORD_PAN_ID]),
-- nla_get_u16(attrs[IEEE802154_ATTR_SHORT_ADDR]),
-- nla_get_u8(attrs[IEEE802154_ATTR_CHANNEL]));
-+
-+ status = nla_get_u8(attrs[IEEE802154_ATTR_STATUS]);
-+ if (status != 0) {
-+ printf("Operation Failed. Check channel and PAN ID\n");
-+ return IZ_STOP_ERR;
-+ }
-
- return IZ_STOP_OK;
- }
diff --git a/patches/lowpan-tools-0.3/0007-Python-is-required-only-for-the-serial-tests.patch b/patches/lowpan-tools-0.3/0007-Python-is-required-only-for-the-serial-tests.patch
deleted file mode 100644
index dc896ae..0000000
--- a/patches/lowpan-tools-0.3/0007-Python-is-required-only-for-the-serial-tests.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Juergen Beisert <jbe@pengutronix.de>
-Date: Tue, 7 Jan 2014 10:25:05 +0100
-Subject: [PATCH] Python is required only for the serial tests
-
-Only the serial tests require host and target python.
-
-Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
----
- configure.ac | 20 +++++++++++++++-----
- test-serial/Makefile.am | 2 ++
- 2 files changed, 17 insertions(+), 5 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index 89c265128fdb..755b39a303fe 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -19,6 +19,11 @@ AC_CONFIG_HEADER([config.h])
- # Test for new silent rules and enable only if they are available
- m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
-
-+AC_ARG_ENABLE([tests],
-+ [AC_HELP_STRING([--disable-tests], [do not install the tests @<:@default=yes@:>@])],
-+ [],
-+ [enable_tests=yes])
-+
- AC_ARG_WITH(zbtestdir, [AC_HELP_STRING([--with-zbtestdir],
- [directory where all test programs will be installed])],
- [zbtestdir=$withval],
-@@ -77,11 +82,16 @@ AC_PROG_LIBTOOL
- AM_PROG_LEX
- AC_PROG_YACC
- AC_SUBST(LIBTOOL_DEPS)
--# Currently the scripts works with python2.x only
--# Check for this at first
--AC_PATH_PROG(PYTHON, python2 python2.7 python2.6 python2.5 python)
--AM_PATH_PYTHON(,, [:])
--py_CHECK_MAJOR_VERSION([PYTHON_VERSION], [2])
-+
-+if test "x$enable_tests" == "xyes" ; then
-+ # Currently the scripts works with python2.x only
-+ # Check for this at first
-+ AC_PATH_PROG(PYTHON, python2 python2.7 python2.6 python2.5 python)
-+ AM_PATH_PYTHON(,, [:])
-+ py_CHECK_MAJOR_VERSION([PYTHON_VERSION], [2])
-+fi
-+AM_CONDITIONAL([PYTHON_AVAILABLE], [test "x$enable_tests" == "xyes"])
-+
- AM_MISSING_PROG(HELP2MAN, help2man, $missing_dir)
-
- # Checks for libraries.
-diff --git a/test-serial/Makefile.am b/test-serial/Makefile.am
-index 5553ded5000a..733d47226670 100644
---- a/test-serial/Makefile.am
-+++ b/test-serial/Makefile.am
-@@ -1,6 +1,8 @@
-+if PYTHON_AVAILABLE
- include $(top_srcdir)/Makefile.common
-
- python_PYTHON = test_DQ.py
- tests = test_packets.py test_edscan.py test_recv.py test_trx.py
- zbtest_SCRIPTS = $(tests)
- EXTRA_DIST = $(tests)
-+endif
diff --git a/patches/lowpan-tools-0.3/autogen.sh b/patches/lowpan-tools-0.3/autogen.sh
deleted file mode 100755
index 354fb5f..0000000
--- a/patches/lowpan-tools-0.3/autogen.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#! /bin/sh
-
-set -e
-
-autoreconf \
- --force \
- --install \
- --warnings=cross \
- --warnings=syntax \
- --warnings=obsolete \
- --warnings=unsupported
diff --git a/patches/lowpan-tools-0.3/series b/patches/lowpan-tools-0.3/series
deleted file mode 100644
index f800554..0000000
--- a/patches/lowpan-tools-0.3/series
+++ /dev/null
@@ -1,10 +0,0 @@
-# generated by git-ptx-patches
-#tag:base --start-number 1
-0001-izoordinator-Fixes-to-error-handling.patch
-0002-configure.ac-check-for-python2.x.patch
-0003-m4-add-py_check_major_version.m4.patch
-0004-configure.ac-Check-that-the-python-version-is-indeed.patch
-0005-Allow-to-set-PAN-ID-short-address-and-channel-manual.patch
-0006-iz-mac-Handle-return-code-from-set-command.patch
-0007-Python-is-required-only-for-the-serial-tests.patch
-# 3441df4ef2a954879bf02b211be8aeea - git-ptx-patches magic
diff --git a/rules/lowpan-tools.in b/rules/lowpan-tools.in
deleted file mode 100644
index e23c626..0000000
--- a/rules/lowpan-tools.in
+++ /dev/null
@@ -1,21 +0,0 @@
-## SECTION=networking
-
-menuconfig LOWPAN_TOOLS
- tristate
- prompt "lowpan-tools "
- select LIBNL3
- select PYTHON if LOWPAN_TOOLS_TESTS
- help
- This is a set of utils to manage the Linux LoWPAN stack.
- The LoWPAN stack aims for IEEE 802.15.4-2003 (and for
- lesser extent IEEE 802.15.4-2006) compatibility.
-
-if LOWPAN_TOOLS
-
-config LOWPAN_TOOLS_TESTS
- bool
- prompt "lowpan-tests"
- help
- Install lowpan-test suites in /usr/libexec/lowpan-tools.
-
-endif # LOWPAN_TOOLS
diff --git a/rules/lowpan-tools.make b/rules/lowpan-tools.make
deleted file mode 100644
index 1ec88c5..0000000
--- a/rules/lowpan-tools.make
+++ /dev/null
@@ -1,91 +0,0 @@
-# -*-makefile-*-
-#
-# Copyright (C) 2012 by Alexander Aring <aar@pengutronix.de>
-#
-# See CREDITS for details about who has contributed to this project.
-#
-# For further information about the PTXdist project and license conditions
-# see the README file.
-#
-
-#
-# We provide this package
-#
-PACKAGES-$(PTXCONF_LOWPAN_TOOLS) += lowpan-tools
-
-#
-# Paths and names
-#
-LOWPAN_TOOLS_VERSION := 0.3
-LOWPAN_TOOLS_MD5 := 564bdf163de5b33232d751383495a65c
-LOWPAN_TOOLS := lowpan-tools-$(LOWPAN_TOOLS_VERSION)
-LOWPAN_TOOLS_SUFFIX := tar.gz
-LOWPAN_TOOLS_URL := $(call ptx/mirror, SF, linux-zigbee/$(LOWPAN_TOOLS).$(LOWPAN_TOOLS_SUFFIX))
-LOWPAN_TOOLS_SOURCE := $(SRCDIR)/$(LOWPAN_TOOLS).$(LOWPAN_TOOLS_SUFFIX)
-LOWPAN_TOOLS_DIR := $(BUILDDIR)/$(LOWPAN_TOOLS)
-LOWPAN_TOOLS_LICENSE := GPLv2
-
-# ----------------------------------------------------------------------------
-# Prepare
-# ----------------------------------------------------------------------------
-
-LOWPAN_TOOLS_CONF_ENV = \
- $(CROSS_ENV) \
- ac_cv_prog_YACC=: \
- ac_cv_prog_LEX=:
-
-ifdef PTXCONF_LOWPAN_TOOLS_TESTS
-LOWPAN_TOOLS_CONF_ENV += ac_cv_path_PYTHON=$(CROSS_PYTHON)
-else
-LOWPAN_TOOLS_CONF_ENV += ac_cv_path_PYTHON=:
-endif
-
-#
-# autoconf
-#
-LOWPAN_TOOLS_CONF_TOOL := autoconf
-LOWPAN_TOOLS_CONF_OPT := \
- $(CROSS_AUTOCONF_USR) \
- --$(call ptx/endis, PTXCONF_LOWPAN_TOOLS_TESTS)-tests \
- --disable-manpages \
- --enable-shared \
- --disable-static \
- --disable-werror \
- --with-gnu-ld
-
-LOWPAN_TOOLS_INSTALL_FILES := \
- gnl izlisten listen-packet test1 test2 test3 test4 test5 \
- test6 test7 test_edscan.py test_packets.py test_recv.py \
- test_trx.py
-
-# ----------------------------------------------------------------------------
-# Target-Install
-# ----------------------------------------------------------------------------
-
-$(STATEDIR)/lowpan-tools.targetinstall:
- @$(call targetinfo)
-
- @$(call install_init, lowpan-tools)
- @$(call install_fixup, lowpan-tools,PRIORITY,optional)
- @$(call install_fixup, lowpan-tools,SECTION,base)
- @$(call install_fixup, lowpan-tools,AUTHOR,"Alexander Aring <aar@pengutronix.de>")
- @$(call install_fixup, lowpan-tools,DESCRIPTION,missing)
-
- @$(call install_copy, lowpan-tools, 0, 0, 0755, -, /usr/bin/izchat)
- @$(call install_copy, lowpan-tools, 0, 0, 0755, -, /usr/sbin/iz)
- @$(call install_copy, lowpan-tools, 0, 0, 0755, -, /usr/sbin/izattach)
- @$(call install_copy, lowpan-tools, 0, 0, 0755, -, /usr/sbin/izcoordinator)
-
-ifdef PTXCONF_LOWPAN_TOOLS_TESTS
- @$(call install_copy, lowpan-tools, 0, 0, 0644, -, $(PYTHON_SITEPACKAGES)/test_DQ.pyc)
-
- @$(foreach tool,$(LOWPAN_TOOLS_INSTALL_FILES), \
- $(call install_copy, lowpan-tools, 0, 0, 0755, -, \
- /usr/libexec/lowpan-tools/$(tool));)
-endif
-
- @$(call install_finish, lowpan-tools)
-
- @$(call touch)
-
-# vim: syntax=make
diff --git a/rules/wpan-tools.in b/rules/wpan-tools.in
new file mode 100644
index 0000000..58776b0
--- /dev/null
+++ b/rules/wpan-tools.in
@@ -0,0 +1,8 @@
+## SECTION=networking
+
+config WPAN_TOOLS
+ tristate
+ prompt "wpan-tools"
+ select LIBNL3
+ help
+ Userspace tools for Linux IEEE 802.15.4 stack.
diff --git a/rules/wpan-tools.make b/rules/wpan-tools.make
new file mode 100644
index 0000000..2dc27d7
--- /dev/null
+++ b/rules/wpan-tools.make
@@ -0,0 +1,57 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2014 by Alexander Aring <aar@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_WPAN_TOOLS) += wpan-tools
+
+#
+# Paths and names
+#
+WPAN_TOOLS_VERSION := 0.3
+WPAN_TOOLS_MD5 := 7b79a68b4529f6f3913f9e2ae19edb65
+WPAN_TOOLS := wpan-tools-$(WPAN_TOOLS_VERSION)
+WPAN_TOOLS_SUFFIX := tar.gz
+WPAN_TOOLS_URL := http://wpan.cakelab.org/releases/$(WPAN_TOOLS).$(WPAN_TOOLS_SUFFIX)
+WPAN_TOOLS_SOURCE := $(SRCDIR)/$(WPAN_TOOLS).$(WPAN_TOOLS_SUFFIX)
+WPAN_TOOLS_DIR := $(BUILDDIR)/$(WPAN_TOOLS)
+WPAN_TOOLS_LICENSE := unknown
+
+#
+# autoconf
+#
+WPAN_TOOLS_CONF_TOOL := autoconf
+WPAN_TOOLS_CONF_OPT := \
+ $(CROSS_AUTOCONF_USR) \
+ $(GLOBAL_LARGE_FILE_OPTION) \
+ --disable-shared \
+ --disable-static
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/wpan-tools.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, wpan-tools)
+ @$(call install_fixup, wpan-tools,PRIORITY,optional)
+ @$(call install_fixup, wpan-tools,SECTION,base)
+ @$(call install_fixup, wpan-tools,AUTHOR,"Alexander Aring <aar@pengutronix.de>")
+ @$(call install_fixup, wpan-tools,DESCRIPTION,missing)
+
+ @$(call install_copy, wpan-tools, 0, 0, 0755, -, /usr/bin/iwpan)
+
+ @$(call install_finish, wpan-tools)
+
+ @$(call touch)
+
+# vim: syntax=make
diff --git a/scripts/migrate/migrate_ptx b/scripts/migrate/migrate_ptx
index 17449cb..cba8e2a 100755
--- a/scripts/migrate/migrate_ptx
+++ b/scripts/migrate/migrate_ptx
@@ -220,3 +220,11 @@ s/^\(\(# \)\?PTXCONF_GST[A-Z_]*1\)1/\1/
#
s/^# PTXCONF_LIBUSB_DISABLE_LOG.*$/PTXCONF_LIBUSB_LOG=y/
s/^PTXCONF_LIBUSB_DISABLE_LOG=y$/# PTXCONF_LIBUSB_LOG is not set/
+
+#
+# from : ptxdist-2014.12.0
+# to : ptxdist-2015.01.0
+# symbol : LOWPAN_TOOLS -> WPAN_TOOLS
+# reason : userspace tool replacement
+#
+s/^\(\(# \)\?PTXCONF_\)_LOWPAN_TOOLS/\1_WPAN_TOOLS/
--
2.1.3
--
ptxdist mailing list
ptxdist@pengutronix.de
next reply other threads:[~2014-12-14 12:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-14 12:27 Alexander Aring [this message]
2015-01-12 15:35 ` Michael Olbrich
2015-01-18 18:03 ` Alexander Aring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418560053-3549-1-git-send-email-alex.aring@gmail.com \
--to=alex.aring@gmail.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox