[ptxdist] [PATCH v2 2/2] host-openocd: new package for openocd-0.8.0

[Andreas Pretzsch <apr@cn-eng.de>]

Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
---
 rules/host-openocd.in   | 211 ++++++++++++++++++++++++++++++++++++++++++++++++
 rules/host-openocd.make |  69 ++++++++++++++++
 2 files changed, 280 insertions(+)
 create mode 100644 rules/host-openocd.in
 create mode 100644 rules/host-openocd.make

diff --git a/rules/host-openocd.in b/rules/host-openocd.in
new file mode 100644
index 0000000..ba5b072
--- /dev/null
+++ b/rules/host-openocd.in
@@ -0,0 +1,211 @@
+## SECTION=hosttools
+
+menuconfig HOST_OPENOCD
+	tristate
+	prompt "OpenOCD                       "
+
+	# libusb-1.x
+	select HOST_LIBUSB	if HOST_OPENOCD_FTDI || HOST_OPENOCD_STLINK || HOST_OPENOCD_TI_ICDI || HOST_OPENOCD_ULINK || HOST_OPENOCD_USB_BLASTER_2
+	# libusb-1.x or libusb-0.1
+	select HOST_LIBUSB	if HOST_OPENOCD_JLINK || HOST_OPENOCD_OSBDM || HOST_OPENOCD_OPENDOUS || HOST_OPENOCD_AICE
+	# libusb-0.1 ; currently no package in ptxdist, so disable it
+	#select HOST_LIBUSB_COMPAT	if HOST_OPENOCD_VSLLINK || HOST_OPENOCD_USBPROG || HOST_OPENOCD_RLINK || HOST_OPENOCD_ARMJTAGEW
+	# libhidapi ; currently no package in ptxdist, so disable it
+	#select HOST_HIDAPI	if HOST_OPENOCD_CMSIS_DAP
+	# libftdi1 or libftdi, with libftdi1 preferred ; currently no package in ptxdist, so disable it
+	#select HOST_LIBFTDI1	if HOST_OPENOCD_USB_BLASTER_LIBFTDI || HOST_OPENOCD_PRESTO_LIBFTDI || HOST_OPENOCD_OPENJTAG_FTDI
+
+	help
+	  The Open On-Chip Debugger (OpenOCD) provides debugging, in-system
+	  programming and boundary-scan testing for embedded target devices.
+	  It supports JTAG and SWD (direct or via dongle) to access targets.
+	  Flash writing is supported for various internal and external types.
+	  It is controlled with TCL scripts and can act as gdbserver.
+
+if HOST_OPENOCD
+
+# ===== interface drivers =====
+
+config HOST_OPENOCD_DUMMY
+	bool
+	prompt "dummy port driver"
+
+# --- libusb-1.x based
+
+config HOST_OPENOCD_FTDI
+	bool
+	prompt "MPSSE mode of FTDI based devices"
+
+config HOST_OPENOCD_STLINK
+	bool
+	prompt "ST-Link JTAG Programmer"
+
+config HOST_OPENOCD_TI_ICDI
+	bool
+	prompt "TI ICDI JTAG Programmer"
+
+config HOST_OPENOCD_ULINK
+	bool
+	prompt "Keil ULINK JTAG Programmer"
+
+config HOST_OPENOCD_USB_BLASTER_2
+	bool
+	prompt "Altera USB-Blaster II Compatible"
+
+# --- libusb-1.x or libusb-0.1 based
+
+config HOST_OPENOCD_JLINK
+	bool
+	prompt "Segger J-Link JTAG Programmer"
+
+config HOST_OPENOCD_OSBDM
+	bool
+	prompt "OSBDM (JTAG only) Programmer"
+
+config HOST_OPENOCD_OPENDOUS
+	bool
+	prompt "eStick/opendous JTAG Programmer"
+
+config HOST_OPENOCD_AICE
+	bool
+	prompt "Andes JTAG Programmer"
+
+# --- libusb-0.1 based
+
+config HOST_OPENOCD_VSLLINK
+	bool
+	# needs libusb-0.1
+	depends on BROKEN
+	prompt "Versaloon-Link JTAG Programmer"
+
+config HOST_OPENOCD_USBPROG
+	bool
+	# needs libusb-0.1
+	depends on BROKEN
+	prompt "USBProg JTAG Programmer"
+
+config HOST_OPENOCD_RLINK
+	bool
+	# needs libusb-0.1
+	depends on BROKEN
+	prompt "Raisonance RLink JTAG Programmer"
+
+config HOST_OPENOCD_ARMJTAGEW
+	bool
+	# needs libusb-0.1
+	depends on BROKEN
+	prompt "Olimex ARM-JTAG-EW Programmer"
+
+# --- hidapi based
+config HOST_OPENOCD_CMSIS_DAP
+	bool
+	# needs libhidapi
+	depends on BROKEN
+	prompt "CMSIS-DAP Compliant Debugger"
+
+# --- various
+
+config HOST_OPENOCD_PARPORT
+	bool
+	prompt "pc parallel port driver"
+
+if HOST_OPENOCD_PARPORT
+	config HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV
+		bool
+		prompt "Disable use of ppdev (/dev/parportN) (x86 only)"
+
+	config HOST_OPENOCD_PARPORT_GIVEIO
+		bool
+		depends on HOST_OPENOCD_PARPORT
+		prompt "Enable use of giveio (CygWin only)"
+endif
+
+config HOST_OPENOCD_JTAG_VPI
+	bool
+	prompt "JTAG VPI"
+
+config HOST_OPENOCD_USB_BLASTER_LIBFTDI
+	bool
+	prompt "Altera USB-Blaster (libftdi driver, opensource)"
+
+config HOST_OPENOCD_USB_BLASTER_FTD2XX
+	bool
+	# needs ftd2xx
+	depends on BROKEN
+	prompt "Altera USB-Blaster (FTD2XX driver from ftdichip.com)"
+
+config HOST_OPENOCD_AMTJTAGACCEL
+	bool
+	prompt "Amontec JTAG-Accelerator driver"
+
+config HOST_OPENOCD_ZY1000
+	bool
+	prompt "ZY1000 interface"
+
+if HOST_OPENOCD_ZY1000
+	config HOST_OPENOCD_ZY1000_MASTER
+		bool
+		prompt "Use ZY1000 JTAG master registers"
+endif
+
+config HOST_OPENOCD_IOUTIL
+	bool
+	prompt "ioutil functions - for standalone OpenOCD implementations"
+
+config HOST_OPENOCD_EP93XX
+	bool
+	prompt "EP93xx based SBCs"
+
+config HOST_OPENOCD_AT91RM9200
+	bool
+	prompt "AT91RM9200 based SBCs"
+
+config HOST_OPENOCD_BCM2835GPIO
+	bool
+	prompt "bitbanging on BCM2835 (as found in Raspberry Pi)"
+
+config HOST_OPENOCD_GW16012
+	bool
+	prompt "Gateworks GW16012 JTAG Programmer"
+
+config HOST_OPENOCD_PRESTO_LIBFTDI
+	bool
+	prompt "ASIX Presto Programmer using the libftdi driver"
+
+config HOST_OPENOCD_PRESTO_FTD2XX
+	# needs ftd2xx
+	depends on BROKEN
+	bool
+	prompt "ASIX Presto Programmer using the FTD2XX driver"
+
+config HOST_OPENOCD_OPENJTAG_FTD2XX
+	# needs ftd2xx
+	depends on BROKEN
+	bool
+	prompt "OpenJTAG Programmer with ftd2xx driver"
+
+config HOST_OPENOCD_OPENJTAG_FTDI
+	bool
+	prompt "OpenJTAG Programmer with ftdi driver"
+
+config HOST_OPENOCD_OOCD_TRACE
+	bool
+	prompt "prototype OpenOCD+trace ETM capture hardware"
+
+config HOST_OPENOCD_BUSPIRATE
+	bool
+	prompt "Buspirate"
+
+config HOST_OPENOCD_SYSFSGPIO
+	bool
+	prompt "programming driven via sysfs gpios"
+
+config HOST_OPENOCD_MINIDRIVER_DUMMY
+	bool
+	prompt "dummy minidriver"
+
+config HOST_OPENOCD_REMOTE_BITBANG
+	bool
+	prompt "Remote Bitbang jtag driver"
+
+endif
diff --git a/rules/host-openocd.make b/rules/host-openocd.make
new file mode 100644
index 0000000..d72dd38
--- /dev/null
+++ b/rules/host-openocd.make
@@ -0,0 +1,69 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2014 by Andreas Pretzsch <apr@cn-eng.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+HOST_PACKAGES-$(PTXCONF_HOST_OPENOCD) += host-openocd
+
+HOST_OPENOCD_VERSION	:= 0.8.0
+HOST_OPENOCD_MD5	:= 6d83c34763a5f1d1ac7ad83c5a11f4fb
+HOST_OPENOCD		:= openocd-$(HOST_OPENOCD_VERSION)
+HOST_OPENOCD_SUFFIX	:= tar.bz2
+HOST_OPENOCD_URL	:= $(call ptx/mirror, SF, openocd/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX))
+HOST_OPENOCD_SOURCE	:= $(SRCDIR)/$(HOST_OPENOCD).$(HOST_OPENOCD_SUFFIX)
+HOST_OPENOCD_DIR	:= $(HOST_BUILDDIR)/$(HOST_OPENOCD)
+# License: OpenOCD: GPLv2+, jimtcl: BSD
+HOST_OPENOCD_LICENSE	:= LGPLv2, BSD
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+HOST_OPENOCD_CONF_TOOL	:= autoconf
+HOST_OPENOCD_CONF_OPT	:= $(HOST_AUTOCONF) \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_DUMMY)-dummy \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_FTDI)-ftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_STLINK)-stlink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_TI_ICDI)-ti-icdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ULINK)-ulink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_2)-usb-blaster-2 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JLINK)-jlink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OSBDM)-osbdm \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENDOUS)-opendous \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AICE)-aice \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_VSLLINK)-vsllink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USBPROG)-usbprog \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_RLINK)-rlink \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ARMJTAGEW)-armjtagew \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_CMSIS_DAP)-cmsis-dap \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT)-parport \
+	--$(call ptx/disen, PTXCONF_HOST_OPENOCD_PARPORT_DISABLE_PARPORT_PPDEV)-parport-ppdev \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PARPORT_GIVEIO)-parport-giveio \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_JTAG_VPI)-jtag_vpi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_LIBFTDI)-usb_blaster_libftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_USB_BLASTER_FTD2XX)-usb_blaster_ftd2xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AMTJTAGACCEL)-amtjtagaccel \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000)-zy1000 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_ZY1000_MASTER)-zy1000-master \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_IOUTIL)-ioutil \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_EP93XX)-ep93xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_AT91RM9200)-at91rm9200 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BCM2835GPIO)-bcm2835gpio \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_GW16012)-gw16012 \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_LIBFTDI)-presto_libftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_PRESTO_FTD2XX)-presto_ftd2xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTD2XX)-openjtag_ftd2xx \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OPENJTAG_FTDI)-openjtag_ftdi \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_OOCD_TRACE)-oocd_trace \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_BUSPIRATE)-buspirate \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_SYSFSGPIO)-sysfsgpio \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_MINIDRIVER_DUMMY)-minidriver-dummy \
+	--$(call ptx/endis, PTXCONF_HOST_OPENOCD_REMOTE_BITBANG)-remote-bitbang \
+
+
+# vim: syntax=make
-- 
2.1.1


-- 
ptxdist mailing list
ptxdist@pengutronix.de