From: Alexander Stein <alexander.stein@systec-electronic.com>
To: ptxdist@pengutronix.de
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Subject: [ptxdist] [PATCH 1/1] u-boot-tools: Update to version 2014.07
Date: Mon, 29 Sep 2014 09:08:38 +0200 [thread overview]
Message-ID: <1411974518-22075-1-git-send-email-alexander.stein@systec-electronic.com> (raw)
This updates the u-boot tools to 2014.07, where fw_printenv/fw_setenv
also support MMC devices.
The now somewhat changed build system always need a target configured. So
use sandbox as dummy. Now it is not possible to build mkimage for the
target. So remove that from Kconfig.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
---
rules/host-u-boot-tools.make | 2 +-
rules/u-boot-tools.in | 10 +---------
rules/u-boot-tools.make | 16 +++++-----------
3 files changed, 7 insertions(+), 21 deletions(-)
diff --git a/rules/host-u-boot-tools.make b/rules/host-u-boot-tools.make
index 27543f9..d786418 100644
--- a/rules/host-u-boot-tools.make
+++ b/rules/host-u-boot-tools.make
@@ -19,7 +19,7 @@ HOST_PACKAGES-$(PTXCONF_HOST_U_BOOT_TOOLS) += host-u-boot-tools
# ----------------------------------------------------------------------------
HOST_U_BOOT_TOOLS_CONF_TOOL := NO
-HOST_U_BOOT_TOOLS_MAKE_OPT := tools
+HOST_U_BOOT_TOOLS_MAKE_OPT := sandbox_config tools
# ----------------------------------------------------------------------------
# Install
diff --git a/rules/u-boot-tools.in b/rules/u-boot-tools.in
index b02ded5..76ed28a 100644
--- a/rules/u-boot-tools.in
+++ b/rules/u-boot-tools.in
@@ -5,18 +5,10 @@ menuconfig U_BOOT_TOOLS
prompt "u-boot-tools "
help
some helpful tools from U-Boot project. Most important tool in
- this section is mkimage to generate U-Boot boot images.
+ this section is fw_printenv/fw_setenv to read/write U-Boot settings.
if U_BOOT_TOOLS
-config U_BOOT_TOOLS_TOOL_MKIMAGE
- tristate
- default y
- prompt "mkimage"
- help
- the U-Boot mkimage command is used to create boot images for
- the U-Boot bootloader.
-
config U_BOOT_TOOLS_TOOL_ENV
tristate
default n
diff --git a/rules/u-boot-tools.make b/rules/u-boot-tools.make
index 29a912c..350175a 100644
--- a/rules/u-boot-tools.make
+++ b/rules/u-boot-tools.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_U_BOOT_TOOLS) += u-boot-tools
#
# Paths and names
#
-U_BOOT_TOOLS_VERSION := 2011.12
-U_BOOT_TOOLS_MD5 := 7f29b9f6da44d6e46e988e7561fd1d5f
+U_BOOT_TOOLS_VERSION := 2014.07
+U_BOOT_TOOLS_MD5 := 36d4bad687edcafa396fee607e505d4e
U_BOOT_TOOLS := u-boot-$(U_BOOT_TOOLS_VERSION)
U_BOOT_TOOLS_SUFFIX := tar.bz2
U_BOOT_TOOLS_URL := http://ftp.denx.de/pub/u-boot/$(U_BOOT_TOOLS).$(U_BOOT_TOOLS_SUFFIX)
@@ -30,10 +30,10 @@ U_BOOT_TOOLS_LICENSE := GPLv2
# ----------------------------------------------------------------------------
U_BOOT_TOOLS_CONF_TOOL := NO
+# just pick sandbox as a dummy target config
U_BOOT_TOOLS_MAKE_OPT := \
- HOSTCC="$(CROSS_CC)" \
- HOSTSTRIP="$(CROSS_STRIP)" \
- tools
+ CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE) \
+ sandbox_config tools
ifdef PTXCONF_U_BOOT_TOOLS_TOOL_ENV
U_BOOT_TOOLS_MAKE_OPT += env
@@ -45,8 +45,6 @@ endif
$(STATEDIR)/u-boot-tools.install:
@$(call targetinfo)
- install -D $(U_BOOT_TOOLS_DIR)/tools/mkimage \
- $(U_BOOT_TOOLS_PKGDIR)/usr/bin/mkimage
ifdef PTXCONF_U_BOOT_TOOLS_TOOL_ENV
install -D $(U_BOOT_TOOLS_DIR)/tools/env/fw_printenv \
$(U_BOOT_TOOLS_PKGDIR)/usr/sbin/fw_printenv
@@ -67,10 +65,6 @@ $(STATEDIR)/u-boot-tools.targetinstall:
"Andreas Bießmann <andreas@biessmann.de>")
@$(call install_fixup, u-boot-tools,DESCRIPTION,missing)
-ifdef PTXCONF_U_BOOT_TOOLS_TOOL_MKIMAGE
- @$(call install_copy, u-boot-tools, 0, 0, 0755, -, /usr/bin/mkimage)
-endif
-
ifdef PTXCONF_U_BOOT_TOOLS_TOOL_ENV
@$(call install_copy, u-boot-tools, 0, 0, 0755, -, /usr/sbin/fw_printenv)
@$(call install_link, u-boot-tools, fw_printenv, /usr/sbin/fw_setenv)
--
1.8.5.5
--
ptxdist mailing list
ptxdist@pengutronix.de
next reply other threads:[~2014-09-29 7:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-29 7:08 Alexander Stein [this message]
2014-10-07 12:24 ` Alexander Stein
2014-11-13 16:40 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411974518-22075-1-git-send-email-alexander.stein@systec-electronic.com \
--to=alexander.stein@systec-electronic.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox