mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Alexander Aring <alex.aring@gmail.com>
To: ptxdist@pengutronix.de
Cc: Alexander Aring <alex.aring@gmail.com>
Subject: [ptxdist] [PATCH 3/3] iputils: add new package iputils
Date: Sat, 25 Jan 2014 14:18:25 +0100	[thread overview]
Message-ID: <1390655905-29427-3-git-send-email-alex.aring@gmail.com> (raw)
In-Reply-To: <1390655905-29427-1-git-send-email-alex.aring@gmail.com>

This patch adds another package for most common network binary tools
like ping, ping6, etc.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
 rules/iputils.in   | 118 ++++++++++++++++++++++++++++++++++++++++++++
 rules/iputils.make | 141 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 259 insertions(+)
 create mode 100644 rules/iputils.in
 create mode 100644 rules/iputils.make

diff --git a/rules/iputils.in b/rules/iputils.in
new file mode 100644
index 0000000..12695e5
--- /dev/null
+++ b/rules/iputils.in
@@ -0,0 +1,118 @@
+## SECTION=networking
+
+menuconfig IPUTILS
+	tristate
+	prompt "iputils                       "
+	select LIBC_RESOLV	if IPUTILS_PING6
+	select LIBCAP		if IPUTILS_ARPING || IPUTILS_PING || IPUTILS_PING6 || IPUTILS_TRACEROUTE6
+	select GNUTLS		if IPUTILS_PING6
+	select GNUTLS_OPENSSL	if IPUTILS_PING6
+	help
+	  The iputils package is set of small useful utilities for Linux
+	  networking.
+
+if IPUTILS
+
+config IPUTILS_ARPING
+	bool
+	depends on !BUSYBOX_ARPING
+	prompt "arping"
+	help
+	  Ping destination on device interface by ARP packets, using source
+	  address source.
+
+comment "BusyBox' arping is selected!"
+        depends on BUSYBOX_ARPING
+
+config IPUTILS_CLOCKDIFF
+	bool
+	prompt "clockdiff"
+	help
+	  Measures clock difference between us and destination with 1 msec
+	  resolution.
+
+config IPUTILS_PING
+	bool
+	depends on !INETUTILS_PING
+	prompt "ping"
+	help
+	  The ping command uses the ICMP protocol's mandatory ECHO_REQUEST datagram
+	  to elicit an ICMP ECHO_RESPONSE from a host or gateway. ECHO_REQUEST
+	  datagrams pings have an IP and ICMP header, followed by a struct
+	  timeval and then an arbitrary number of pad bytes used to fill out
+	  the packet.
+
+comment "BusyBox' ping is selected!"
+        depends on BUSYBOX_PING
+
+comment "inetutils' ping is selected!"
+        depends on INETUTILS_PING
+
+config IPUTILS_PING6
+	bool
+	depends on !INETUTILS_PING6
+	prompt "ping6"
+	depends on GLOBAL_IPV6
+	help
+	  The ping6 command is IPv6 version of ping, and can also send Node
+	  Information Queries (RFC4620). Intermediate hops may not be allowed,
+	  because IPv6 source routing was deprecated (RFC5095).
+
+comment "BusyBox' ping6 is selected!"
+        depends on BUSYBOX_PING6
+
+comment "inetutils' ping6 is selected!"
+        depends on INETUTILS_PING6
+
+config IPUTILS_RARPD
+	bool
+	prompt "rarpd"
+	help
+	  Listens RARP (http://tools.ietf.org/rfc/rfc903.txt) requests from
+	  clients. Provided MAC address of client is found in /etc/ethers
+	  database and obtained host name is resolvable to an IP address
+	  appropriate for attached network, rarpd answers to client with
+	  RARPD reply carrying an IP address.
+
+config IPUTILS_RDISC
+	bool
+	prompt "rdisc"
+	help
+	  The rdisc command implements client side of the ICMP router discover
+	  protocol. rdisc is invoked at boot time to populate the network
+	  routing tables with default routes.
+
+config IPUTILS_TFTPD
+	bool
+	depends on !INETUTILS_TFTPD
+	prompt "tftpd"
+	help
+
+comment "BusyBox' tftpd is selected!"
+        depends on BUSYBOX_TFTPD
+
+comment "inetutils' tftpd is selected!"
+        depends on INETUTILS_TFTPD
+
+config IPUTILS_TRACEPATH
+	bool
+	prompt "tracepath"
+	help
+
+config IPUTILS_TRACEPATH6
+	bool
+	prompt "tracepath6"
+	depends on GLOBAL_IPV6
+	help
+
+config IPUTILS_TRACEROUTE6
+	bool
+	depends on !BUSYBOX_TRACEROUTE6
+	prompt "traceroute6"
+	depends on GLOBAL_IPV6
+	help
+
+comment "BusyBox' traceroute6 is selected!"
+        depends on BUSYBOX_TRACEROUTE6
+
+endif
diff --git a/rules/iputils.make b/rules/iputils.make
new file mode 100644
index 0000000..9685370
--- /dev/null
+++ b/rules/iputils.make
@@ -0,0 +1,141 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2014 by Alexander Aring <aar@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_IPUTILS) += iputils
+
+#
+# Paths and names
+#
+IPUTILS_VERSION	:= s20121221
+IPUTILS_MD5	:= 6072aef64205720dd1893b375e184171
+IPUTILS		:= iputils-$(IPUTILS_VERSION)
+IPUTILS_SUFFIX	:= tar.bz2
+IPUTILS_URL	:= http://www.skbuff.net/iputils/$(IPUTILS).$(IPUTILS_SUFFIX)
+IPUTILS_SOURCE	:= $(SRCDIR)/$(IPUTILS).$(IPUTILS_SUFFIX)
+IPUTILS_DIR	:= $(BUILDDIR)/$(IPUTILS)
+IPUTILS_LICENSE	:= GPLv2
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+IPUTILS_CONF_TOOL	:= NO
+IPUTILS_MAKEVARS	:= $(CROSS_ENV)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/iputils.install:
+	@$(call targetinfo)
+	mkdir -p $(IPUTILS_PKGDIR)/usr/bin
+
+ifdef PTXCONF_IPUTILS_ARPING
+	install -m0755 $(IPUTILS_DIR)/arping $(IPUTILS_PKGDIR)/usr/bin
+endif
+
+ifdef PTXCONF_IPUTILS_CLOCKDIFF
+	install -m0755 $(IPUTILS_DIR)/clockdiff $(IPUTILS_PKGDIR)/usr/bin
+endif
+
+ifdef PTXCONF_IPUTILS_PING
+	install -m0755 $(IPUTILS_DIR)/ping $(IPUTILS_PKGDIR)/usr/bin
+endif
+
+ifdef PTXCONF_IPUTILS_PING6
+	install -m0755 $(IPUTILS_DIR)/ping6 $(IPUTILS_PKGDIR)/usr/bin
+endif
+	@$(call touch)
+
+ifdef PTXCONF_IPUTILS_RARPD
+	install -m0755 $(IPUTILS_DIR)/rarpd $(IPUTILS_PKGDIR)/usr/bin
+endif
+
+ifdef PTXCONF_IPUTILS_RDISC
+	install -m0755 $(IPUTILS_DIR)/rdisc $(IPUTILS_PKGDIR)/usr/bin
+endif
+
+ifdef PTXCONF_IPUTILS_TFTPD
+	install -m0755 $(IPUTILS_DIR)/tftpd $(IPUTILS_PKGDIR)/usr/bin
+endif
+
+ifdef PTXCONF_IPUTILS_TRACEPATH
+	install -m0755 $(IPUTILS_DIR)/tracepath $(IPUTILS_PKGDIR)/usr/bin
+endif
+
+ifdef PTXCONF_IPUTILS_TRACEPATH6
+	install -m0755 $(IPUTILS_DIR)/tracepath6 $(IPUTILS_PKGDIR)/usr/bin
+endif
+
+ifdef PTXCONF_IPUTILS_TRACEROUTE6
+	install -m0755 $(IPUTILS_DIR)/traceroute6 $(IPUTILS_PKGDIR)/usr/bin
+endif
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/iputils.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, iputils)
+	@$(call install_fixup, iputils,PRIORITY,optional)
+	@$(call install_fixup, iputils,SECTION,base)
+	@$(call install_fixup, iputils,AUTHOR,"Alexander Aring <aar@pengutronix.de>")
+	@$(call install_fixup, iputils,DESCRIPTION,missing)
+
+ifdef PTXCONF_IPUTILS_ARPING
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/arping)
+endif
+
+ifdef PTXCONF_IPUTILS_CLOCKDIFF
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/clockdiff)
+endif
+
+ifdef PTXCONF_IPUTILS_PING
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/ping)
+endif
+
+ifdef PTXCONF_IPUTILS_PING6
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/ping6)
+endif
+
+ifdef PTXCONF_IPUTILS_RARPD
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/rarpd)
+endif
+
+ifdef PTXCONF_IPUTILS_RDISC
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/rdisc)
+endif
+
+ifdef PTXCONF_IPUTILS_TFTPD
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/tftpd)
+endif
+
+ifdef PTXCONF_IPUTILS_TRACEPATH
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/tracepath)
+endif
+
+ifdef PTXCONF_IPUTILS_TRACEPATH6
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/tracepath6)
+endif
+
+ifdef PTXCONF_IPUTILS_TRACEROUTE6
+	@$(call install_copy, iputils, 0, 0, 0755, -, /usr/bin/traceroute6)
+endif
+
+	@$(call install_finish, iputils)
+
+	@$(call touch)
+
+# vim: syntax=make
-- 
1.8.5.3


-- 
ptxdist mailing list
ptxdist@pengutronix.de

  parent reply	other threads:[~2014-01-25 13:18 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-25 13:18 [ptxdist] [PATCH 1/3] inetutils: add misiing depends on !BUSYBOX_TFTPD Alexander Aring
2014-01-25 13:18 ` [ptxdist] [PATCH 2/3] gnutls: add support for openssl compatibility Alexander Aring
2014-01-27  9:48   ` Michael Olbrich
2014-01-27 10:06     ` Alexander Aring
2014-01-25 13:18 ` Alexander Aring [this message]
2014-01-25 13:49   ` [ptxdist] [PATCH 3/3] iputils: add new package iputils Robert Schwebel
2014-01-25 13:54     ` Alexander Aring
2014-01-25 14:00       ` Robert Schwebel
2014-01-25 14:01         ` Alexander Aring
2014-01-25 13:48 ` [ptxdist] [PATCH 1/3] inetutils: add misiing depends on !BUSYBOX_TFTPD Robert Schwebel
2014-01-25 13:50   ` Alexander Aring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1390655905-29427-3-git-send-email-alex.aring@gmail.com \
    --to=alex.aring@gmail.com \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox