* [ptxdist] [PATCH 0/2] X-Load update and EFL support
@ 2012-06-14 16:32 Flavio Alves
2012-06-14 16:32 ` [ptxdist] [PATCH 1/2] * Update x-load from the following git repository git://git.gitorious.org/x-load-omap3/mainline.git The main implementation is the generation of the MLO file from PTXDIST Flavio Alves
2012-06-14 16:32 ` [ptxdist] [PATCH 2/2] * Add support for the EFL libraries (www.enlightenment.org) * Add remaining host packages used to build EFL Libraries - host-lua - host-libjpeg Flavio Alves
0 siblings, 2 replies; 3+ messages in thread
From: Flavio Alves @ 2012-06-14 16:32 UTC (permalink / raw)
To: ptxdist
Adding support for Enlightent Foundation Lbraries (EFL) and adding an update
for X-Load.
Tested with BeagleBoard.
Flavio Alves (2):
* Update x-load from the following git repository
git://git.gitorious.org/x-load-omap3/mainline.git The main
implementation is the generation of the MLO file from PTXDIST
* Add support for the EFL libraries (www.enlightenment.org) * Add
remaining host packages used to build EFL Libraries -
host-lua - host-libjpeg
patches/x-load-f243938/series | 1 +
.../update-x_load-from-gitourious.patch | 7077 ++++++++++++++++++++
rules/ecore.in | 192 +
rules/ecore.make | 278 +
rules/edje.in | 60 +
rules/edje.make | 127 +
rules/eet.in | 41 +
rules/eet.make | 111 +
rules/efl.in | 28 +
rules/efreet.in | 10 +
rules/efreet.make | 103 +
rules/eina.in | 17 +
rules/eina.make | 113 +
rules/elementary.in | 45 +
rules/elementary.make | 132 +
rules/embryo.in | 10 +
rules/embryo.make | 101 +
rules/evas.in | 135 +
rules/evas.make | 201 +
rules/host-ecore.in | 9 +
rules/host-ecore.make | 77 +
rules/host-edje.in | 13 +
rules/host-edje.make | 73 +
rules/host-eet.in | 10 +
rules/host-eet.make | 74 +
rules/host-eina.in | 7 +
rules/host-eina.make | 73 +
rules/host-embryo.in | 7 +
rules/host-embryo.make | 73 +
rules/host-evas.in | 11 +
rules/host-evas.make | 73 +
rules/host-libjpeg.in | 7 +
rules/host-libjpeg.make | 73 +
rules/host-lua.in | 7 +
rules/host-lua.make | 73 +
35 files changed, 9442 insertions(+)
create mode 100644 patches/x-load-f243938/series
create mode 100644 patches/x-load-f243938/update-x_load-from-gitourious.patch
create mode 100644 rules/ecore.in
create mode 100644 rules/ecore.make
create mode 100644 rules/edje.in
create mode 100644 rules/edje.make
create mode 100644 rules/eet.in
create mode 100644 rules/eet.make
create mode 100644 rules/efl.in
create mode 100644 rules/efreet.in
create mode 100644 rules/efreet.make
create mode 100644 rules/eina.in
create mode 100644 rules/eina.make
create mode 100644 rules/elementary.in
create mode 100644 rules/elementary.make
create mode 100644 rules/embryo.in
create mode 100644 rules/embryo.make
create mode 100644 rules/evas.in
create mode 100644 rules/evas.make
create mode 100644 rules/host-ecore.in
create mode 100644 rules/host-ecore.make
create mode 100644 rules/host-edje.in
create mode 100644 rules/host-edje.make
create mode 100644 rules/host-eet.in
create mode 100644 rules/host-eet.make
create mode 100644 rules/host-eina.in
create mode 100644 rules/host-eina.make
create mode 100644 rules/host-embryo.in
create mode 100644 rules/host-embryo.make
create mode 100644 rules/host-evas.in
create mode 100644 rules/host-evas.make
create mode 100644 rules/host-libjpeg.in
create mode 100644 rules/host-libjpeg.make
create mode 100644 rules/host-lua.in
create mode 100644 rules/host-lua.make
--
1.7.9.5
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ptxdist] [PATCH 1/2] * Update x-load from the following git repository git://git.gitorious.org/x-load-omap3/mainline.git The main implementation is the generation of the MLO file from PTXDIST
2012-06-14 16:32 [ptxdist] [PATCH 0/2] X-Load update and EFL support Flavio Alves
@ 2012-06-14 16:32 ` Flavio Alves
2012-06-14 16:32 ` [ptxdist] [PATCH 2/2] * Add support for the EFL libraries (www.enlightenment.org) * Add remaining host packages used to build EFL Libraries - host-lua - host-libjpeg Flavio Alves
1 sibling, 0 replies; 3+ messages in thread
From: Flavio Alves @ 2012-06-14 16:32 UTC (permalink / raw)
To: ptxdist
---
patches/x-load-f243938/series | 1 +
.../update-x_load-from-gitourious.patch | 7077 ++++++++++++++++++++
2 files changed, 7078 insertions(+)
create mode 100644 patches/x-load-f243938/series
create mode 100644 patches/x-load-f243938/update-x_load-from-gitourious.patch
diff --git a/patches/x-load-f243938/series b/patches/x-load-f243938/series
new file mode 100644
index 0000000..9fb2360
--- /dev/null
+++ b/patches/x-load-f243938/series
@@ -0,0 +1 @@
+update-x_load-from-gitourious.patch
diff --git a/patches/x-load-f243938/update-x_load-from-gitourious.patch b/patches/x-load-f243938/update-x_load-from-gitourious.patch
new file mode 100644
index 0000000..da722ad
--- /dev/null
+++ b/patches/x-load-f243938/update-x_load-from-gitourious.patch
@@ -0,0 +1,7077 @@
+diff -uNr x-load-f243938.orig/board/omap3530beagle/omap3530beagle.c x-load-f243938/board/omap3530beagle/omap3530beagle.c
+--- x-load-f243938.orig/board/omap3530beagle/omap3530beagle.c 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/board/omap3530beagle/omap3530beagle.c 2012-06-07 14:45:39.441648666 -0300
+@@ -304,7 +304,31 @@
+ /* setup sdrc to ball mux */
+ __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
+
+- if (beagle_revision() == REVISION_XM) {
++ switch(beagle_revision()) {
++ case REVISION_C4:
++ if (identify_xm_ddr() == NUMONYX_MCP) {
++ __raw_writel(0x4, SDRC_CS_CFG); /* 512MB/bank */
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_0);
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM, SDRC_MCFG_1);
++ __raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0);
++ __raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0);
++ __raw_writel(NUMONYX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1);
++ __raw_writel(NUMONYX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1);
++ } else {
++ __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1);
++ __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0);
++ __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0);
++ __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1);
++ __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1);
++ }
++ break;
++ case REVISION_XM:
+ if (identify_xm_ddr() == MICRON_DDR) {
+ __raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */
+ __raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_0);
+@@ -326,7 +350,8 @@
+ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0);
+ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1);
+ }
+- } else {
++ break;
++ default:
+ __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */
+ __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
+ __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1);
+@@ -659,7 +684,10 @@
+ printf("Beagle Rev C1/C2/C3\n");
+ break;
+ case REVISION_C4:
+- printf("Beagle Rev C4\n");
++ if (identify_xm_ddr() == NUMONYX_MCP)
++ printf("Beagle Rev C4 from Special Computing\n");
++ else
++ printf("Beagle Rev C4\n");
+ break;
+ case REVISION_XM:
+ printf("Beagle xM Rev A\n");
+@@ -955,6 +983,7 @@
+ __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0);
+ delay(1000);
+
++#ifdef CFG_NAND_K9F1G08R0A
+ if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)) {
+ __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0);
+ __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0);
+@@ -975,9 +1004,10 @@
+ #endif
+ return 1;
+ }
+-
+ }
++#endif
+
++#ifdef CFG_ONENAND
+ if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)) {
+ __raw_writel(ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0);
+ __raw_writel(ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0);
+@@ -999,6 +1029,7 @@
+ return 1;
+ }
+ }
++#endif
+ return 0;
+ }
+
+diff -uNr x-load-f243938.orig/board/omap3evm/omap3evm.c x-load-f243938/board/omap3evm/omap3evm.c
+--- x-load-f243938.orig/board/omap3evm/omap3evm.c 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/board/omap3evm/omap3evm.c 2012-06-07 14:45:39.445648666 -0300
+@@ -235,7 +235,7 @@
+ __raw_writel(MICRON_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0);
+ }
+
+- __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0);
+ __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER);
+
+ /* init sequence for mDDR/mSDR using manual commands (DDR is different) */
+diff -uNr x-load-f243938.orig/board/omap4430panda/clock.c x-load-f243938/board/omap4430panda/clock.c
+--- x-load-f243938.orig/board/omap4430panda/clock.c 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/board/omap4430panda/clock.c 2012-06-07 14:45:39.445648666 -0300
+@@ -0,0 +1,804 @@
++/*
++ * (C) Copyright 2009
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ * Rajendra Nayak <rnayak@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <asm/arch/cpu.h>
++#include <asm/io.h>
++#include <asm/arch/bits.h>
++#include <asm/arch/clocks.h>
++#include <asm/arch/mem.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/sys_info.h>
++#include <asm/arch/clocks443x.h>
++#include <command.h>
++
++#define CONFIG_OMAP4_SDC 1
++
++/* Used to index into DPLL parameter tables */
++struct dpll_param {
++ unsigned int m;
++ unsigned int n;
++ unsigned int m2;
++ unsigned int m3;
++ unsigned int m4;
++ unsigned int m5;
++ unsigned int m6;
++ unsigned int m7;
++};
++
++/* Tables having M,N,M2 et al values for different sys_clk speeds
++ * This table is generated only for OPP100
++ * The tables are organized as follows:
++ * Rows : 1 - 12M, 2 - 13M, 3 - 16.8M, 4 - 19.2M, 5 - 26M, 6 - 27M, 7 - 38.4M
++ */
++
++/* MPU parameters */
++struct dpll_param mpu_dpll_param[7] = {
++ /* 12M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 13M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 16.8M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 19.2M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 26M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 27M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 38.4M values */
++#ifdef CONFIG_MPU_600
++ /* RUN MPU @ 600 MHz */
++ {0x7d, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00},
++#elif CONFIG_MPU_1000
++ {0x69, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00},
++#else
++ {0x1a, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00},
++#endif
++};
++
++/* IVA parameters */
++struct dpll_param iva_dpll_param[7] = {
++ /* 12M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 13M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 16.8M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 19.2M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 26M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 27M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 38.4M values */
++#ifdef CONFIG_OMAP4_SDC
++ {0x61, 0x03, 0x00, 0x00, 0x04, 0x07, 0x00, 0x00},
++#else
++ {0x61, 0x03, 0x00, 0x00, 0x04, 0x07, 0x00, 0x00},
++#endif
++};
++
++/* CORE parameters */
++struct dpll_param core_dpll_param[7] = {
++ /* 12M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 13M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 16.8M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 19.2M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 26M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 27M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 38.4M values - DDR@200MHz*/
++ {0x7d, 0x05, 0x02, 0x05, 0x08, 0x04, 0x06, 0x05},
++};
++
++/* CORE parameters - ES2.1 */
++struct dpll_param core_dpll_param_ddr400[7] = {
++ /* 12M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 13M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 16.8M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 19.2M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 26M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 27M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 38.4M values - DDR@400MHz*/
++ {0x7d, 0x05, 0x01, 0x05, 0x08, 0x04, 0x06, 0x05},
++};
++
++/* CORE parameters for L3 at 190 MHz - For ES1 only*/
++struct dpll_param core_dpll_param_l3_190[7] = {
++ /* 12M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 13M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 16.8M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 19.2M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 26M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 27M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 38.4M values */
++#ifdef CONFIG_OMAP4_SDC
++#ifdef CORE_190MHZ
++ {0x1f0, 0x18, 0x01, 0x05, 0x08, 0x04, 0x06, 0x05},
++#else /* Default CORE @166MHz */
++ {0x1b0, 0x18, 0x01, 0x05, 0x08, 0x04, 0x06, 0x05},
++#endif
++#else
++ {0x7d, 0x05, 0x01, 0x05, 0x08, 0x04, 0x06, 0x08},
++#endif
++};
++
++/* PER parameters */
++struct dpll_param per_dpll_param[7] = {
++ /* 12M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 13M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 16.8M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 19.2M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 26M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 27M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 38.4M values */
++#if 0
++ /* SDC settings */
++ {0x0a, 0x00, 0x04, 0x03, 0x06, 0x05, 0x02, 0x03},
++#endif
++ {0x14, 0x00, 0x08, 0x06, 0x0c, 0x09, 0x04, 0x05},
++};
++
++/* ABE parameters */
++struct dpll_param abe_dpll_param[7] = {
++ /* 12M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 13M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 16.8M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 19.2M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 26M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 27M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 38.4M values */
++#ifdef CONFIG_OMAP4_SDC
++ {0x40, 0x18, 0x1, 0x1, 0x0, 0x0, 0x0, 0x0},
++#else
++ {0x40, 0x18, 0x1, 0x1, 0x0, 0x0, 0x0, 0x0},
++#endif
++};
++
++/* USB parameters */
++struct dpll_param usb_dpll_param[7] = {
++ /* 12M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 13M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 16.8M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 19.2M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 26M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 27M values */
++ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
++ /* 38.4M values */
++#ifdef CONFIG_OMAP4_SDC
++ {0x32, 0x1, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0},
++#else
++ {0x32, 0x1, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0},
++#endif
++};
++
++typedef struct dpll_param dpll_param;
++
++static void configure_mpu_dpll(u32 clk_index)
++{
++ dpll_param *dpll_param_p;
++
++ /* Unlock the MPU dpll */
++ sr32(CM_CLKMODE_DPLL_MPU, 0, 3, PLL_MN_POWER_BYPASS);
++ wait_on_value(BIT0, 0, CM_IDLEST_DPLL_MPU, LDELAY);
++
++ /* Program MPU DPLL */
++ dpll_param_p = &mpu_dpll_param[clk_index];
++
++ sr32(CM_AUTOIDLE_DPLL_MPU, 0, 3, 0x0); /* Disable DPLL autoidle */
++
++ /* Set M,N,M2 values */
++ sr32(CM_CLKSEL_DPLL_MPU, 8, 11, dpll_param_p->m);
++ sr32(CM_CLKSEL_DPLL_MPU, 0, 6, dpll_param_p->n);
++ sr32(CM_DIV_M2_DPLL_MPU, 0, 5, dpll_param_p->m2);
++ sr32(CM_DIV_M2_DPLL_MPU, 8, 1, 0x1);
++
++ /* Lock the mpu dpll */
++ sr32(CM_CLKMODE_DPLL_MPU, 0, 3, PLL_LOCK | 0x10);
++ wait_on_value(BIT0, 1, CM_IDLEST_DPLL_MPU, LDELAY);
++
++ return;
++}
++
++static void configure_iva_dpll(u32 clk_index)
++{
++ dpll_param *dpll_param_p;
++
++ /* Unlock the IVA dpll */
++ sr32(CM_CLKMODE_DPLL_IVA, 0, 3, PLL_MN_POWER_BYPASS);
++ wait_on_value(BIT0, 0, CM_IDLEST_DPLL_IVA, LDELAY);
++
++ /* CM_BYPCLK_DPLL_IVA = CORE_X2_CLK/2 */
++ sr32(CM_BYPCLK_DPLL_IVA, 0, 2, 0x1);
++
++ /* Program IVA DPLL */
++ dpll_param_p = &iva_dpll_param[clk_index];
++
++ sr32(CM_AUTOIDLE_DPLL_IVA, 0, 3, 0x0); /* Disable DPLL autoidle */
++
++ /* Set M,N,M4,M5 */
++ sr32(CM_CLKSEL_DPLL_IVA, 8, 11, dpll_param_p->m);
++ sr32(CM_CLKSEL_DPLL_IVA, 0, 7, dpll_param_p->n);
++ sr32(CM_DIV_M4_DPLL_IVA, 0, 5, dpll_param_p->m4);
++ sr32(CM_DIV_M4_DPLL_IVA, 8, 1, 0x1);
++ sr32(CM_DIV_M5_DPLL_IVA, 0, 5, dpll_param_p->m5);
++ sr32(CM_DIV_M5_DPLL_IVA, 8, 1, 0x1);
++
++ /* Lock the iva dpll */
++ sr32(CM_CLKMODE_DPLL_IVA, 0, 3, PLL_LOCK);
++ wait_on_value(BIT0, 1, CM_IDLEST_DPLL_IVA, LDELAY);
++
++ return;
++}
++
++static void configure_per_dpll(u32 clk_index)
++{
++ dpll_param *dpll_param_p;
++
++ /* Unlock the PER dpll */
++ sr32(CM_CLKMODE_DPLL_PER, 0, 3, PLL_MN_POWER_BYPASS);
++ wait_on_value(BIT0, 0, CM_IDLEST_DPLL_PER, LDELAY);
++
++ /* Program PER DPLL */
++ dpll_param_p = &per_dpll_param[clk_index];
++
++ /* Disable autoidle */
++ sr32(CM_AUTOIDLE_DPLL_PER, 0, 3, 0x0);
++
++ sr32(CM_CLKSEL_DPLL_PER, 8, 11, dpll_param_p->m);
++ sr32(CM_CLKSEL_DPLL_PER, 0, 6, dpll_param_p->n);
++ sr32(CM_DIV_M2_DPLL_PER, 0, 5, dpll_param_p->m2);
++ sr32(CM_DIV_M3_DPLL_PER, 0, 5, dpll_param_p->m3);
++ sr32(CM_DIV_M4_DPLL_PER, 0, 5, dpll_param_p->m4);
++ sr32(CM_DIV_M5_DPLL_PER, 0, 5, dpll_param_p->m5);
++ sr32(CM_DIV_M6_DPLL_PER, 0, 5, dpll_param_p->m6);
++ sr32(CM_DIV_M7_DPLL_PER, 0, 5, dpll_param_p->m7);
++
++// if(omap_revision() == OMAP4430_ES1_0)
++// {
++ /* Do this only on ES1.0 */
++ sr32(CM_DIV_M2_DPLL_PER, 8, 1, 0x1);
++ sr32(CM_DIV_M3_DPLL_PER, 8, 1, 0x1);
++ sr32(CM_DIV_M4_DPLL_PER, 8, 1, 0x1);
++ sr32(CM_DIV_M5_DPLL_PER, 8, 1, 0x1);
++ sr32(CM_DIV_M6_DPLL_PER, 8, 1, 0x1);
++ sr32(CM_DIV_M7_DPLL_PER, 8, 1, 0x1);
++// }
++
++ /* Lock the per dpll */
++ sr32(CM_CLKMODE_DPLL_PER, 0, 3, PLL_LOCK);
++ wait_on_value(BIT0, 1, CM_IDLEST_DPLL_PER, LDELAY);
++
++ return;
++}
++
++static void configure_abe_dpll(u32 clk_index)
++{
++ dpll_param *dpll_param_p;
++
++ /* Select sys_clk as ref clk for ABE dpll */
++ sr32(CM_ABE_PLL_REF_CLKSEL, 0, 32, 0x0);
++
++ /* Enable slimbus and pad clocks */
++ sr32(CM_CLKSEL_ABE, 0, 32, 0x500);
++
++ /* Unlock the ABE dpll */
++ sr32(CM_CLKMODE_DPLL_ABE, 0, 3, PLL_MN_POWER_BYPASS);
++ wait_on_value(BIT0, 0, CM_IDLEST_DPLL_ABE, LDELAY);
++
++ /* Program ABE DPLL */
++ dpll_param_p = &abe_dpll_param[clk_index];
++
++ /* Disable autoidle */
++ sr32(CM_AUTOIDLE_DPLL_ABE, 0, 3, 0x0);
++
++ sr32(CM_CLKSEL_DPLL_ABE, 8, 11, dpll_param_p->m);
++ sr32(CM_CLKSEL_DPLL_ABE, 0, 6, dpll_param_p->n);
++
++ /* Force DPLL CLKOUTHIF to stay enabled */
++ sr32(CM_DIV_M2_DPLL_ABE, 0, 32, 0x500);
++ sr32(CM_DIV_M2_DPLL_ABE, 0, 5, dpll_param_p->m2);
++ sr32(CM_DIV_M2_DPLL_ABE, 8, 1, 0x1);
++ /* Force DPLL CLKOUTHIF to stay enabled */
++ sr32(CM_DIV_M3_DPLL_ABE, 0, 32, 0x100);
++ sr32(CM_DIV_M3_DPLL_ABE, 0, 5, dpll_param_p->m3);
++ sr32(CM_DIV_M3_DPLL_ABE, 8, 1, 0x1);
++
++ /* Lock the abe dpll */
++ sr32(CM_CLKMODE_DPLL_ABE, 0, 3, PLL_LOCK);
++ wait_on_value(BIT0, 1, CM_IDLEST_DPLL_ABE, LDELAY);
++
++ return;
++}
++
++static void configure_usb_dpll(u32 clk_index)
++{
++ dpll_param *dpll_param_p;
++
++ /* Select the 60Mhz clock 480/8 = 60*/
++ sr32(CM_CLKSEL_USB_60MHz, 0, 32, 0x1);
++
++ /* Unlock the USB dpll */
++ sr32(CM_CLKMODE_DPLL_USB, 0, 3, PLL_MN_POWER_BYPASS);
++ wait_on_value(BIT0, 0, CM_IDLEST_DPLL_USB, LDELAY);
++
++ /* Program USB DPLL */
++ dpll_param_p = &usb_dpll_param[clk_index];
++
++ /* Disable autoidle */
++ sr32(CM_AUTOIDLE_DPLL_USB, 0, 3, 0x0);
++
++ sr32(CM_CLKSEL_DPLL_USB, 8, 11, dpll_param_p->m);
++ sr32(CM_CLKSEL_DPLL_USB, 0, 6, dpll_param_p->n);
++
++ /* Force DPLL CLKOUT to stay active */
++ sr32(CM_DIV_M2_DPLL_USB, 0, 32, 0x100);
++ sr32(CM_DIV_M2_DPLL_USB, 0, 5, dpll_param_p->m2);
++ sr32(CM_DIV_M2_DPLL_USB, 8, 1, 0x1);
++ sr32(CM_CLKDCOLDO_DPLL_USB, 8, 1, 0x1);
++
++ /* Lock the usb dpll */
++ sr32(CM_CLKMODE_DPLL_USB, 0, 3, PLL_LOCK);
++ wait_on_value(BIT0, 1, CM_IDLEST_DPLL_USB, LDELAY);
++
++ /* force enable the CLKDCOLDO clock */
++ sr32(CM_CLKDCOLDO_DPLL_USB, 0, 32, 0x100);
++
++ return;
++}
++
++static void configure_core_dpll(clk_index)
++{
++ dpll_param *dpll_param_p;
++
++ /* Get the sysclk speed from cm_sys_clksel
++ * Set it to 38.4 MHz, in case ROM code is bypassed
++ */
++ if (!clk_index)
++ return;
++
++ /* CORE_CLK=CORE_X2_CLK/2, L3_CLK=CORE_CLK/2, L4_CLK=L3_CLK/2 */
++ sr32(CM_CLKSEL_CORE, 0, 32, 0x110);
++
++ /* Unlock the CORE dpll */
++ sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_MN_POWER_BYPASS);
++ wait_on_value(BIT0, 0, CM_IDLEST_DPLL_CORE, LDELAY);
++
++ /* Program Core DPLL */
++ if(omap_revision() == OMAP4430_ES1_0)
++ dpll_param_p = &core_dpll_param_l3_190[clk_index];
++ else if(omap_revision() == OMAP4430_ES2_0)
++ dpll_param_p = &core_dpll_param[clk_index];
++ else if(omap_revision() == OMAP4430_ES2_1)
++ dpll_param_p = &core_dpll_param_ddr400[clk_index];
++
++ /* Disable autoidle */
++ sr32(CM_AUTOIDLE_DPLL_CORE, 0, 3, 0x0);
++
++ sr32(CM_CLKSEL_DPLL_CORE, 8, 11, dpll_param_p->m);
++ sr32(CM_CLKSEL_DPLL_CORE, 0, 6, dpll_param_p->n);
++ sr32(CM_DIV_M2_DPLL_CORE, 0, 5, dpll_param_p->m2);
++ sr32(CM_DIV_M3_DPLL_CORE, 0, 5, dpll_param_p->m3);
++ sr32(CM_DIV_M4_DPLL_CORE, 0, 5, dpll_param_p->m4);
++ sr32(CM_DIV_M5_DPLL_CORE, 0, 5, dpll_param_p->m5);
++ sr32(CM_DIV_M6_DPLL_CORE, 0, 5, dpll_param_p->m6);
++ sr32(CM_DIV_M7_DPLL_CORE, 0, 5, dpll_param_p->m7);
++
++ if(omap_revision() == OMAP4430_ES1_0)
++ {
++ /* Do this only on ES1.0 */
++ sr32(CM_DIV_M2_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M3_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M4_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M5_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M6_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M7_DPLL_CORE, 8, 1, 0x1);
++ }
++
++
++ /* Lock the core dpll */
++ sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_LOCK);
++ wait_on_value(BIT0, 1, CM_IDLEST_DPLL_CORE, LDELAY);
++
++ return;
++}
++
++
++void configure_core_dpll_no_lock(void)
++{
++ dpll_param *dpll_param_p;
++ u32 clk_index;
++
++ /* Get the sysclk speed from cm_sys_clksel
++ * Set it to 38.4 MHz, in case ROM code is bypassed
++ */
++ __raw_writel(0x7,CM_SYS_CLKSEL);
++ clk_index = 7;
++
++ clk_index = clk_index - 1;
++ /* CORE_CLK=CORE_X2_CLK/2, L3_CLK=CORE_CLK/2, L4_CLK=L3_CLK/2 */
++ sr32(CM_CLKSEL_CORE, 0, 32, 0x110);
++
++ /* Unlock the CORE dpll */
++ sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_MN_POWER_BYPASS);
++ wait_on_value(BIT0, 0, CM_IDLEST_DPLL_CORE, LDELAY);
++
++ /* Program Core DPLL */
++ if(omap_revision() == OMAP4430_ES1_0)
++ dpll_param_p = &core_dpll_param_l3_190[clk_index];
++ else if(omap_revision() == OMAP4430_ES2_0)
++ dpll_param_p = &core_dpll_param[clk_index];
++ else if(omap_revision() == OMAP4430_ES2_1)
++ dpll_param_p = &core_dpll_param_ddr400[clk_index];
++
++ /* Disable autoidle */
++ sr32(CM_AUTOIDLE_DPLL_CORE, 0, 3, 0x0);
++
++ sr32(CM_CLKSEL_DPLL_CORE, 8, 11, dpll_param_p->m);
++ sr32(CM_CLKSEL_DPLL_CORE, 0, 6, dpll_param_p->n);
++ sr32(CM_DIV_M2_DPLL_CORE, 0, 5, dpll_param_p->m2);
++ sr32(CM_DIV_M3_DPLL_CORE, 0, 5, dpll_param_p->m3);
++ sr32(CM_DIV_M4_DPLL_CORE, 0, 5, dpll_param_p->m4);
++ sr32(CM_DIV_M5_DPLL_CORE, 0, 5, dpll_param_p->m5);
++ sr32(CM_DIV_M6_DPLL_CORE, 0, 5, dpll_param_p->m6);
++ sr32(CM_DIV_M7_DPLL_CORE, 0, 5, dpll_param_p->m7);
++
++// if(omap_revision() == OMAP4430_ES1_0)
++// {
++ /* Do this only on ES1.0 */
++ sr32(CM_DIV_M2_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M3_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M4_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M5_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M6_DPLL_CORE, 8, 1, 0x1);
++ sr32(CM_DIV_M7_DPLL_CORE, 8, 1, 0x1);
++// }
++
++ return;
++}
++
++void lock_core_dpll(void)
++{
++ /* Lock the core dpll */
++ sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_LOCK);
++ wait_on_value(BIT0, 1, CM_IDLEST_DPLL_CORE, LDELAY);
++
++ return;
++}
++
++void lock_core_dpll_shadow(void)
++{
++ dpll_param *dpll_param_p;
++ /* Lock the core dpll using freq update method */
++ *(volatile int*)0x4A004120 = 10; //(CM_CLKMODE_DPLL_CORE)
++
++ if(omap_revision() == OMAP4430_ES1_0)
++ dpll_param_p = &core_dpll_param_l3_190[6];
++ else if(omap_revision() == OMAP4430_ES2_0)
++ dpll_param_p = &core_dpll_param[6];
++ else if(omap_revision() == OMAP4430_ES2_1)
++ dpll_param_p = &core_dpll_param_ddr400[6];
++
++ /* CM_SHADOW_FREQ_CONFIG1: DLL_OVERRIDE = 1(hack), DLL_RESET = 1,
++ * DPLL_CORE_M2_DIV =1, DPLL_CORE_DPLL_EN = 0x7, FREQ_UPDATE = 1
++ */
++ *(volatile int*)0x4A004260 = 0x70D | (dpll_param_p->m2 << 11);
++
++ /* Wait for Freq_Update to get cleared: CM_SHADOW_FREQ_CONFIG1 */
++ while( ( (*(volatile int*)0x4A004260) & 0x1) == 0x1 );
++
++ /* Wait for DPLL to Lock : CM_IDLEST_DPLL_CORE */
++ wait_on_value(BIT0, 1, CM_IDLEST_DPLL_CORE, LDELAY);
++ //lock_core_dpll();
++
++ return;
++}
++
++static void enable_all_clocks(void)
++{
++ volatile int regvalue = 0;
++
++ /* Enable Ducati clocks */
++ sr32(CM_DUCATI_DUCATI_CLKCTRL, 0, 32, 0x1);
++ sr32(CM_DUCATI_CLKSTCTRL, 0, 32, 0x2);
++
++ wait_on_value(BIT8, BIT8, CM_DUCATI_CLKSTCTRL, LDELAY);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_DUCATI_DUCATI_CLKCTRL, LDELAY);
++
++ /* Enable ivahd and sl2 clocks */
++ sr32(IVAHD_IVAHD_CLKCTRL, 0, 32, 0x1);
++ sr32(IVAHD_SL2_CLKCTRL, 0, 32, 0x1);
++ sr32(IVAHD_CLKSTCTRL, 0, 32, 0x2);
++
++ wait_on_value(BIT8, BIT8, IVAHD_CLKSTCTRL, LDELAY);
++
++ /* wait for ivahd to become accessible */
++ //wait_on_value(BIT18|BIT17|BIT16, 0, IVAHD_IVAHD_CLKCTRL, LDELAY);
++ /* wait for sl2 to become accessible */
++ //wait_on_value(BIT17|BIT16, 0, IVAHD_SL2_CLKCTRL, LDELAY);
++
++ /* Enable Tesla clocks */
++ sr32(DSP_DSP_CLKCTRL, 0, 32, 0x1);
++ sr32(DSP_CLKSTCTRL, 0, 32, 0x2);
++
++ wait_on_value(BIT8, BIT8, DSP_CLKSTCTRL, LDELAY);
++
++ /* wait for tesla to become accessible */
++ //wait_on_value(BIT18|BIT17|BIT16, 0, DSP_DSP_CLKCTRL, LDELAY);
++
++ /* TODO: Some hack needed by MM: Clean this */
++ #if 0 /* Doesn't work on some Zebu */
++ *(volatile int*)0x4a306910 = 0x00000003;
++ *(volatile int*)0x550809a0 = 0x00000001;
++ *(volatile int*)0x55080a20 = 0x00000007;
++ #endif
++
++ /* ABE clocks */
++ sr32(CM1_ABE_CLKSTCTRL, 0, 32, 0x3);
++ sr32(CM1_ABE_AESS_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM1_ABE_AESS_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_PDM_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_PDM_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_DMIC_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_DMIC_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_MCASP_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_MCASP_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_MCBSP1_CLKCTRL, 0, 32, 0x08000002);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_MCBSP1_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_MCBSP2_CLKCTRL, 0, 32, 0x08000002);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_MCBSP2_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_MCBSP3_CLKCTRL, 0, 32, 0x08000002);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_MCBSP3_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_SLIMBUS_CLKCTRL, 0, 32, 0xf02);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_SLIMBUS_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_TIMER5_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_TIMER5_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_TIMER6_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_TIMER6_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_TIMER7_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_TIMER7_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_TIMER8_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_TIMER8_CLKCTRL, LDELAY);
++ sr32(CM1_ABE_WDT3_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT17|BIT16, 0, CM1_ABE_WDT3_CLKCTRL, LDELAY);
++ /* Disable sleep transitions */
++ sr32(CM1_ABE_CLKSTCTRL, 0, 32, 0x0);
++
++ /* L4PER clocks */
++ sr32(CM_L4PER_CLKSTCTRL, 0, 32, 0x2);
++ sr32(CM_L4PER_DMTIMER10_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER10_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_DMTIMER11_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER11_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_DMTIMER2_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER2_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_DMTIMER3_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER3_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_DMTIMER4_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER4_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_DMTIMER9_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_DMTIMER9_CLKCTRL, LDELAY);
++
++ /* GPIO clocks */
++ sr32(CM_L4PER_GPIO2_CLKCTRL, 0 ,32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO2_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_GPIO3_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO3_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_GPIO4_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO4_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_GPIO5_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO5_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_GPIO6_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_GPIO6_CLKCTRL, LDELAY);
++
++ sr32(CM_L4PER_HDQ1W_CLKCTRL, 0, 32, 0x2);
++
++ /* I2C clocks */
++ sr32(CM_L4PER_I2C1_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_I2C1_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_I2C2_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_I2C2_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_I2C3_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_I2C3_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_I2C4_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_I2C4_CLKCTRL, LDELAY);
++
++ sr32(CM_L4PER_MCBSP4_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCBSP4_CLKCTRL, LDELAY);
++
++ /* MCSPI clocks */
++ sr32(CM_L4PER_MCSPI1_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCSPI1_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_MCSPI2_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCSPI2_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_MCSPI3_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCSPI3_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_MCSPI4_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_MCSPI4_CLKCTRL, LDELAY);
++
++ /* MMC clocks */
++ sr32(CM_L3INIT_HSMMC1_CLKCTRL, 0, 2, 0x2);
++ sr32(CM_L3INIT_HSMMC1_CLKCTRL, 24, 1, 0x1);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSMMC1_CLKCTRL, LDELAY);
++ sr32(CM_L3INIT_HSMMC2_CLKCTRL, 0, 2, 0x2);
++ sr32(CM_L3INIT_HSMMC2_CLKCTRL, 24, 1, 0x1);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSMMC2_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_MMCSD3_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT18|BIT17|BIT16, 0, CM_L4PER_MMCSD3_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_MMCSD4_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT18|BIT17|BIT16, 0, CM_L4PER_MMCSD4_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_MMCSD5_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_MMCSD5_CLKCTRL, LDELAY);
++
++ /* UART clocks */
++ sr32(CM_L4PER_UART1_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_UART1_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_UART2_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_UART2_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_UART3_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_UART3_CLKCTRL, LDELAY);
++ sr32(CM_L4PER_UART4_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_L4PER_UART4_CLKCTRL, LDELAY);
++
++ /* WKUP clocks */
++ sr32(CM_WKUP_GPIO1_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_WKUP_GPIO1_CLKCTRL, LDELAY);
++ sr32(CM_WKUP_TIMER1_CLKCTRL, 0, 32, 0x01000002);
++ wait_on_value(BIT17|BIT16, 0, CM_WKUP_TIMER1_CLKCTRL, LDELAY);
++
++ sr32(CM_WKUP_KEYBOARD_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_WKUP_KEYBOARD_CLKCTRL, LDELAY);
++
++ sr32(CM_SDMA_CLKSTCTRL, 0, 32, 0x0);
++ sr32(CM_MEMIF_CLKSTCTRL, 0, 32, 0x3);
++ sr32(CM_MEMIF_EMIF_1_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_MEMIF_EMIF_1_CLKCTRL, LDELAY);
++ sr32(CM_MEMIF_EMIF_2_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_MEMIF_EMIF_2_CLKCTRL, LDELAY);
++ sr32(CM_D2D_CLKSTCTRL, 0, 32, 0x3);
++ sr32(CM_L3_2_GPMC_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_L3_2_GPMC_CLKCTRL, LDELAY);
++ sr32(CM_L3INSTR_L3_3_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_L3INSTR_L3_3_CLKCTRL, LDELAY);
++ sr32(CM_L3INSTR_L3_INSTR_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_L3INSTR_L3_INSTR_CLKCTRL, LDELAY);
++ sr32(CM_L3INSTR_OCP_WP1_CLKCTRL, 0, 32, 0x1);
++ wait_on_value(BIT17|BIT16, 0, CM_L3INSTR_OCP_WP1_CLKCTRL, LDELAY);
++
++ /* WDT clocks */
++ sr32(CM_WKUP_WDT2_CLKCTRL, 0, 32, 0x2);
++ wait_on_value(BIT17|BIT16, 0, CM_WKUP_WDT2_CLKCTRL, LDELAY);
++
++ /* Enable Camera clocks */
++ sr32(CM_CAM_CLKSTCTRL, 0, 32, 0x3);
++ sr32(CM_CAM_ISS_CLKCTRL, 0, 32, 0x102);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_CAM_ISS_CLKCTRL, LDELAY);
++ sr32(CM_CAM_FDIF_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_CAM_FDIF_CLKCTRL, LDELAY);
++ sr32(CM_CAM_CLKSTCTRL, 0, 32, 0x0);
++
++ /* Enable DSS clocks */
++ /* PM_DSS_PWRSTCTRL ON State and LogicState = 1 (Retention) */
++ *(volatile int*)0x4A307100 = 0x7; //DSS_PRM
++ sr32(CM_DSS_CLKSTCTRL, 0, 32, 0x2);
++ sr32(CM_DSS_DSS_CLKCTRL, 0, 32, 0xf02);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_DSS_DSS_CLKCTRL, LDELAY);
++ sr32(CM_DSS_DEISS_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_DSS_DEISS_CLKCTRL, LDELAY);
++ /* Check for DSS Clocks */
++ while (((*(volatile int*)0x4A009100) & 0xF00) != 0xE00)
++ /* Set HW_AUTO transition mode */
++ sr32(CM_DSS_CLKSTCTRL, 0, 32, 0x3);
++
++ /* Enable SGX clocks */
++ sr32(CM_SGX_CLKSTCTRL, 0, 32, 0x2);
++ sr32(CM_SGX_SGX_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_SGX_SGX_CLKCTRL, LDELAY);
++ /* Check for SGX FCLK and ICLK */
++ while ( (*(volatile int*)0x4A009200) != 0x302 );
++ //sr32(CM_SGX_CLKSTCTRL, 0, 32, 0x0);
++ /* Enable hsi/unipro/usb clocks */
++ sr32(CM_L3INIT_HSI_CLKCTRL, 0, 32, 0x1);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSI_CLKCTRL, LDELAY);
++ sr32(CM_L3INIT_UNIPRO1_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_UNIPRO1_CLKCTRL, LDELAY);
++ sr32(CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSUSBHOST_CLKCTRL, LDELAY);
++ sr32(CM_L3INIT_HSUSBOTG_CLKCTRL, 0, 32, 0x1);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_HSUSBOTG_CLKCTRL, LDELAY);
++ sr32(CM_L3INIT_HSUSBTLL_CLKCTRL, 0, 32, 0x1);
++ //wait_on_value(BIT17|BIT16, 0, CM_L3INIT_HSUSBTLL_CLKCTRL, LDELAY);
++ sr32(CM_L3INIT_FSUSB_CLKCTRL, 0, 32, 0x2);
++ //wait_on_value(BIT18|BIT17|BIT16, 0, CM_L3INIT_FSUSB_CLKCTRL, LDELAY);
++ /* enable the 32K, 48M optional clocks and enable the module */
++ sr32(CM_L3INIT_USBPHY_CLKCTRL, 0, 32, 0x301);
++ //wait_on_value(BIT17|BIT16, 0, CM_L3INIT_USBPHY_CLKCTRL, LDELAY);
++ return;
++}
++
++/******************************************************************************
++ * prcm_init() - inits clocks for PRCM as defined in clocks.h
++ * -- called from SRAM, or Flash (using temp SRAM stack).
++ *****************************************************************************/
++void prcm_init(void)
++{
++ u32 clk_index;
++
++ /* Get the sysclk speed from cm_sys_clksel
++ * Set the CM_SYS_CLKSEL in case ROM code has not set
++ */
++ __raw_writel(0x7,CM_SYS_CLKSEL);
++ clk_index = readl(CM_SYS_CLKSEL);
++ if (!clk_index)
++ return; /* Sys clk uninitialized */
++ /* Core DPLL is locked using FREQ update method */
++ /* configure_core_dpll(clk_index - 1); */
++
++ /* Configure all DPLL's at 100% OPP */
++ configure_mpu_dpll(clk_index - 1);
++ configure_iva_dpll(clk_index - 1);
++ configure_per_dpll(clk_index - 1);
++ configure_abe_dpll(clk_index - 1);
++ configure_usb_dpll(clk_index - 1);
++
++#ifdef CONFIG_OMAP4_SDC
++ /* Enable all clocks */
++ enable_all_clocks();
++#endif
++
++ return;
++}
+diff -uNr x-load-f243938.orig/board/omap4430panda/config.mk x-load-f243938/board/omap4430panda/config.mk
+--- x-load-f243938.orig/board/omap4430panda/config.mk 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/board/omap4430panda/config.mk 2012-06-07 14:45:39.445648666 -0300
+@@ -0,0 +1,21 @@
++#
++# (C) Copyright 2006-2009
++# Texas Instruments, <www.ti.com>
++#
++# SDP4430 board uses ARM-CortexA9 cpu
++# see http://www.ti.com/ for more information on Texas Instruments
++#
++# Physical Address:
++# 8000'0000 (bank0)
++# A000/0000 (bank1)
++# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
++# (mem base + reserved)
++
++# For use with external or internal boots.
++TEXT_BASE = 0x40304350
++
++
++# Handy to get symbols to debug ROM version.
++#TEXT_BASE = 0x0
++#TEXT_BASE = 0x08000000
++#TEXT_BASE = 0x04000000
+diff -uNr x-load-f243938.orig/board/omap4430panda/Makefile x-load-f243938/board/omap4430panda/Makefile
+--- x-load-f243938.orig/board/omap4430panda/Makefile 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/board/omap4430panda/Makefile 2012-06-07 14:45:39.445648666 -0300
+@@ -0,0 +1,49 @@
++#
++# (C) Copyright 2009
++# Texas Instruments, <www.ti.com>
++#
++# (C) Copyright 2000, 2001, 2002
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# version 2 as published by the Free Software Foundation.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = lib$(BOARD).a
++
++OBJS := omap4430panda.o clock.o syslib.o
++SOBJS := platform.o
++
++$(LIB): $(OBJS) $(SOBJS)
++ $(AR) crv $@ $^
++
++clean:
++ rm -f $(SOBJS) $(OBJS)
++
++distclean: clean
++ rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
++
++-include .depend
++
++#########################################################################
+diff -uNr x-load-f243938.orig/board/omap4430panda/omap4430panda.c x-load-f243938/board/omap4430panda/omap4430panda.c
+--- x-load-f243938.orig/board/omap4430panda/omap4430panda.c 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/board/omap4430panda/omap4430panda.c 2012-06-07 14:45:39.445648666 -0300
+@@ -0,0 +1,1235 @@
++/*
++ * (C) Copyright 2004-2009
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++#include <common.h>
++#include <asm/arch/cpu.h>
++#include <asm/io.h>
++#include <asm/arch/bits.h>
++#include <asm/arch/mux.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/sys_info.h>
++#include <asm/arch/clocks.h>
++#include <asm/arch/mem.h>
++#include <i2c.h>
++#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY)
++#include <linux/mtd/nand_legacy.h>
++#endif
++
++/* EMIF and DMM registers */
++#define EMIF1_BASE 0x4c000000
++#define EMIF2_BASE 0x4d000000
++#define DMM_BASE 0x4e000000
++/* EMIF */
++#define EMIF_MOD_ID_REV 0x0000
++#define EMIF_STATUS 0x0004
++#define EMIF_SDRAM_CONFIG 0x0008
++#define EMIF_LPDDR2_NVM_CONFIG 0x000C
++#define EMIF_SDRAM_REF_CTRL 0x0010
++#define EMIF_SDRAM_REF_CTRL_SHDW 0x0014
++#define EMIF_SDRAM_TIM_1 0x0018
++#define EMIF_SDRAM_TIM_1_SHDW 0x001C
++#define EMIF_SDRAM_TIM_2 0x0020
++#define EMIF_SDRAM_TIM_2_SHDW 0x0024
++#define EMIF_SDRAM_TIM_3 0x0028
++#define EMIF_SDRAM_TIM_3_SHDW 0x002C
++#define EMIF_LPDDR2_NVM_TIM 0x0030
++#define EMIF_LPDDR2_NVM_TIM_SHDW 0x0034
++#define EMIF_PWR_MGMT_CTRL 0x0038
++#define EMIF_PWR_MGMT_CTRL_SHDW 0x003C
++#define EMIF_LPDDR2_MODE_REG_DATA 0x0040
++#define EMIF_LPDDR2_MODE_REG_CFG 0x0050
++#define EMIF_L3_CONFIG 0x0054
++#define EMIF_L3_CFG_VAL_1 0x0058
++#define EMIF_L3_CFG_VAL_2 0x005C
++#define IODFT_TLGC 0x0060
++#define EMIF_PERF_CNT_1 0x0080
++#define EMIF_PERF_CNT_2 0x0084
++#define EMIF_PERF_CNT_CFG 0x0088
++#define EMIF_PERF_CNT_SEL 0x008C
++#define EMIF_PERF_CNT_TIM 0x0090
++#define EMIF_READ_IDLE_CTRL 0x0098
++#define EMIF_READ_IDLE_CTRL_SHDW 0x009c
++#define EMIF_ZQ_CONFIG 0x00C8
++#define EMIF_DDR_PHY_CTRL_1 0x00E4
++#define EMIF_DDR_PHY_CTRL_1_SHDW 0x00E8
++#define EMIF_DDR_PHY_CTRL_2 0x00EC
++
++#define DMM_LISA_MAP_0 0x0040
++#define DMM_LISA_MAP_1 0x0044
++#define DMM_LISA_MAP_2 0x0048
++#define DMM_LISA_MAP_3 0x004C
++
++#define MR0_ADDR 0
++#define MR1_ADDR 1
++#define MR2_ADDR 2
++#define MR4_ADDR 4
++#define MR10_ADDR 10
++#define MR16_ADDR 16
++#define REF_EN 0x40000000
++/* defines for MR1 */
++#define MR1_BL4 2
++#define MR1_BL8 3
++#define MR1_BL16 4
++
++#define MR1_BT_SEQ 0
++#define BT_INT 1
++
++#define MR1_WC 0
++#define MR1_NWC 1
++
++#define MR1_NWR3 1
++#define MR1_NWR4 2
++#define MR1_NWR5 3
++#define MR1_NWR6 4
++#define MR1_NWR7 5
++#define MR1_NWR8 6
++
++#define MR1_VALUE (MR1_NWR3 << 5) | (MR1_WC << 4) | (MR1_BT_SEQ << 3) \
++ | (MR1_BL8 << 0)
++
++/* defines for MR2 */
++#define MR2_RL3_WL1 1
++#define MR2_RL4_WL2 2
++#define MR2_RL5_WL2 3
++#define MR2_RL6_WL3 4
++
++/* defines for MR10 */
++#define MR10_ZQINIT 0xFF
++#define MR10_ZQRESET 0xC3
++#define MR10_ZQCL 0xAB
++#define MR10_ZQCS 0x56
++
++
++/* TODO: FREQ update method is not working so shadow registers programming
++ * is just for same of completeness. This would be safer if auto
++ * trasnitions are working
++ */
++#define FREQ_UPDATE_EMIF
++/* EMIF Needs to be configured@19.2 MHz and shadow registers
++ * should be programmed for new OPP.
++ */
++/* Elpida 2x2Gbit */
++#define SDRAM_CONFIG_INIT 0x80800EB1
++#define DDR_PHY_CTRL_1_INIT 0x849FFFF5
++#define READ_IDLE_CTRL 0x000501FF
++#define PWR_MGMT_CTRL 0x4000000f
++#define PWR_MGMT_CTRL_OPP100 0x4000000f
++#define ZQ_CONFIG 0x500b3215
++
++#define CS1_MR(mr) ((mr) | 0x80000000)
++struct ddr_regs{
++ u32 tim1;
++ u32 tim2;
++ u32 tim3;
++ u32 phy_ctrl_1;
++ u32 ref_ctrl;
++ u32 config_init;
++ u32 config_final;
++ u32 zq_config;
++ u8 mr1;
++ u8 mr2;
++};
++const struct ddr_regs ddr_regs_380_mhz = {
++ .tim1 = 0x10cb061a,
++ .tim2 = 0x20350d52,
++ .tim3 = 0x00b1431f,
++ .phy_ctrl_1 = 0x849FF408,
++ .ref_ctrl = 0x000005ca,
++ .config_init = 0x80000eb1,
++ .config_final = 0x80001ab1,
++ .zq_config = 0x500b3215,
++ .mr1 = 0x83,
++ .mr2 = 0x4
++};
++
++/*
++ * Unused timings - but we may need them later
++ * Keep them commented
++ */
++#if 0
++const struct ddr_regs ddr_regs_400_mhz = {
++ .tim1 = 0x10eb065a,
++ .tim2 = 0x20370dd2,
++ .tim3 = 0x00b1c33f,
++ .phy_ctrl_1 = 0x849FF408,
++ .ref_ctrl = 0x00000618,
++ .config_init = 0x80000eb1,
++ .config_final = 0x80001ab1,
++ .zq_config = 0x500b3215,
++ .mr1 = 0x83,
++ .mr2 = 0x4
++};
++
++const struct ddr_regs ddr_regs_200_mhz = {
++ .tim1 = 0x08648309,
++ .tim2 = 0x101b06ca,
++ .tim3 = 0x0048a19f,
++ .phy_ctrl_1 = 0x849FF405,
++ .ref_ctrl = 0x0000030c,
++ .config_init = 0x80000eb1,
++ .config_final = 0x80000eb1,
++ .zq_config = 0x500b3215,
++ .mr1 = 0x23,
++ .mr2 = 0x1
++};
++#endif
++
++const struct ddr_regs ddr_regs_200_mhz_2cs = {
++ .tim1 = 0x08648309,
++ .tim2 = 0x101b06ca,
++ .tim3 = 0x0048a19f,
++ .phy_ctrl_1 = 0x849FF405,
++ .ref_ctrl = 0x0000030c,
++ .config_init = 0x80000eb9,
++ .config_final = 0x80000eb9,
++ .zq_config = 0xD00b3215,
++ .mr1 = 0x23,
++ .mr2 = 0x1
++};
++
++const struct ddr_regs ddr_regs_400_mhz_2cs = {
++ /* tRRD changed from 10ns to 12.5ns because of the tFAW requirement*/
++ .tim1 = 0x10eb0662,
++ .tim2 = 0x20370dd2,
++ .tim3 = 0x00b1c33f,
++ .phy_ctrl_1 = 0x849FF408,
++ .ref_ctrl = 0x00000618,
++ .config_init = 0x80000eb9,
++ .config_final = 0x80001ab9,
++ .zq_config = 0xD00b3215,
++ .mr1 = 0x83,
++ .mr2 = 0x4
++};
++
++/*******************************************************
++ * Routine: delay
++ * Description: spinning delay to use before udelay works
++ ******************************************************/
++static inline void delay(unsigned long loops)
++{
++ __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
++ "bne 1b" : "=r" (loops) : "0"(loops));
++}
++
++
++void big_delay(unsigned int count)
++{
++ int i;
++ for (i=0; i<count; i++)
++ delay(1);
++}
++
++/* TODO: FREQ update method is not working so shadow registers programming
++ * is just for same of completeness. This would be safer if auto
++ * trasnitions are working
++ */
++static int emif_config(unsigned int base)
++{
++ unsigned int reg_value, rev;
++ const struct ddr_regs *ddr_regs;
++ rev = omap_revision();
++
++ if(rev == OMAP4430_ES1_0)
++ ddr_regs = &ddr_regs_380_mhz;
++ else if (rev == OMAP4430_ES2_0)
++ ddr_regs = &ddr_regs_200_mhz_2cs;
++ else if (rev == OMAP4430_ES2_1)
++ ddr_regs = &ddr_regs_400_mhz_2cs;
++ /*
++ * set SDRAM CONFIG register
++ * EMIF_SDRAM_CONFIG[31:29] REG_SDRAM_TYPE = 4 for LPDDR2-S4
++ * EMIF_SDRAM_CONFIG[28:27] REG_IBANK_POS = 0
++ * EMIF_SDRAM_CONFIG[13:10] REG_CL = 3
++ * EMIF_SDRAM_CONFIG[6:4] REG_IBANK = 3 - 8 banks
++ * EMIF_SDRAM_CONFIG[3] REG_EBANK = 0 - CS0
++ * EMIF_SDRAM_CONFIG[2:0] REG_PAGESIZE = 2 - 512- 9 column
++ * JDEC specs - S4-2Gb --8 banks -- R0-R13, C0-c8
++ */
++ *(volatile int*)(base + EMIF_LPDDR2_NVM_CONFIG) &= 0xBFFFFFFF;
++ *(volatile int*)(base + EMIF_SDRAM_CONFIG) = ddr_regs->config_init;
++
++ /* PHY control values */
++ *(volatile int*)(base + EMIF_DDR_PHY_CTRL_1) = DDR_PHY_CTRL_1_INIT;
++ *(volatile int*)(base + EMIF_DDR_PHY_CTRL_1_SHDW)= ddr_regs->phy_ctrl_1;
++
++ /*
++ * EMIF_READ_IDLE_CTRL
++ */
++ *(volatile int*)(base + EMIF_READ_IDLE_CTRL) = READ_IDLE_CTRL;
++ *(volatile int*)(base + EMIF_READ_IDLE_CTRL_SHDW) = READ_IDLE_CTRL;
++
++ /*
++ * EMIF_SDRAM_TIM_1
++ */
++ *(volatile int*)(base + EMIF_SDRAM_TIM_1) = ddr_regs->tim1;
++ *(volatile int*)(base + EMIF_SDRAM_TIM_1_SHDW) = ddr_regs->tim1;
++
++ /*
++ * EMIF_SDRAM_TIM_2
++ */
++ *(volatile int*)(base + EMIF_SDRAM_TIM_2) = ddr_regs->tim2;
++ *(volatile int*)(base + EMIF_SDRAM_TIM_2_SHDW) = ddr_regs->tim2;
++
++ /*
++ * EMIF_SDRAM_TIM_3
++ */
++ *(volatile int*)(base + EMIF_SDRAM_TIM_3) = ddr_regs->tim3;
++ *(volatile int*)(base + EMIF_SDRAM_TIM_3_SHDW) = ddr_regs->tim3;
++
++ *(volatile int*)(base + EMIF_ZQ_CONFIG) = ddr_regs->zq_config;
++ /*
++ * EMIF_PWR_MGMT_CTRL
++ */
++ //*(volatile int*)(base + EMIF_PWR_MGMT_CTRL) = PWR_MGMT_CTRL;
++ //*(volatile int*)(base + EMIF_PWR_MGMT_CTRL_SHDW) = PWR_MGMT_CTRL_OPP100;
++ /*
++ * poll MR0 register (DAI bit)
++ * REG_CS[31] = 0 -- Mode register command to CS0
++ * REG_REFRESH_EN[30] = 1 -- Refresh enable after MRW
++ * REG_ADDRESS[7:0] = 00 -- Refresh enable after MRW
++ */
++
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = MR0_ADDR;
++ do {
++ reg_value = *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA);
++ } while ((reg_value & 0x1) != 0);
++
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = CS1_MR(MR0_ADDR);
++ do {
++ reg_value = *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA);
++ } while ((reg_value & 0x1) != 0);
++
++
++ /* set MR10 register */
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG)= MR10_ADDR;
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = MR10_ZQINIT;
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = CS1_MR(MR10_ADDR);
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = MR10_ZQINIT;
++
++ /* wait for tZQINIT=1us */
++ delay(10);
++
++ /* set MR1 register */
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG)= MR1_ADDR;
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = ddr_regs->mr1;
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = CS1_MR(MR1_ADDR);
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = ddr_regs->mr1;
++
++
++ /* set MR2 register RL=6 for OPP100 */
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG)= MR2_ADDR;
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = ddr_regs->mr2;
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) = CS1_MR(MR2_ADDR);
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = ddr_regs->mr2;
++
++ /* Set SDRAM CONFIG register again here with final RL-WL value */
++ *(volatile int*)(base + EMIF_SDRAM_CONFIG) = ddr_regs->config_final;
++ *(volatile int*)(base + EMIF_DDR_PHY_CTRL_1) = ddr_regs->phy_ctrl_1;
++
++ /*
++ * EMIF_SDRAM_REF_CTRL
++ * refresh rate = DDR_CLK / reg_refresh_rate
++ * 3.9 uS = (400MHz) / reg_refresh_rate
++ */
++ *(volatile int*)(base + EMIF_SDRAM_REF_CTRL) = ddr_regs->ref_ctrl;
++ *(volatile int*)(base + EMIF_SDRAM_REF_CTRL_SHDW) = ddr_regs->ref_ctrl;
++
++ /* set MR16 register */
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG)= MR16_ADDR | REF_EN;
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = 0;
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_CFG) =
++ CS1_MR(MR16_ADDR | REF_EN);
++ *(volatile int*)(base + EMIF_LPDDR2_MODE_REG_DATA) = 0;
++ /* LPDDR2 init complete */
++
++}
++/*****************************************
++ * Routine: ddr_init
++ * Description: Configure DDR
++ * EMIF1 -- CS0 -- DDR1 (256 MB)
++ * EMIF2 -- CS0 -- DDR2 (256 MB)
++ *****************************************/
++static void ddr_init(void)
++{
++ unsigned int base_addr, rev;
++ rev = omap_revision();
++
++ if (rev == OMAP4430_ES1_0)
++ {
++ /* Configurte the Control Module DDRIO device */
++ __raw_writel(0x1c1c1c1c, 0x4A100638);
++ __raw_writel(0x1c1c1c1c, 0x4A10063c);
++ __raw_writel(0x1c1c1c1c, 0x4A100640);
++ __raw_writel(0x1c1c1c1c, 0x4A100648);
++ __raw_writel(0x1c1c1c1c, 0x4A10064c);
++ __raw_writel(0x1c1c1c1c, 0x4A100650);
++ /* LPDDR2IO set to NMOS PTV */
++ __raw_writel(0x00ffc000, 0x4A100704);
++ } else if (rev == OMAP4430_ES2_0) {
++ __raw_writel(0x9e9e9e9e, 0x4A100638);
++ __raw_writel(0x9e9e9e9e, 0x4A10063c);
++ __raw_writel(0x9e9e9e9e, 0x4A100640);
++ __raw_writel(0x9e9e9e9e, 0x4A100648);
++ __raw_writel(0x9e9e9e9e, 0x4A10064c);
++ __raw_writel(0x9e9e9e9e, 0x4A100650);
++ /* LPDDR2IO set to NMOS PTV */
++ __raw_writel(0x00ffc000, 0x4A100704);
++ }
++
++ /*
++ * DMM Configuration
++ */
++
++ /* Both EMIFs 128 byte interleaved*/
++ if (rev == OMAP4430_ES1_0)
++ *(volatile int*)(DMM_BASE + DMM_LISA_MAP_0) = 0x80540300;
++ else
++ *(volatile int*)(DMM_BASE + DMM_LISA_MAP_0) = 0x80640300;
++
++ /* EMIF2 only at 0x90000000 */
++ //*(volatile int*)(DMM_BASE + DMM_LISA_MAP_1) = 0x90400200;
++
++ *(volatile int*)(DMM_BASE + DMM_LISA_MAP_2) = 0x00000000;
++ *(volatile int*)(DMM_BASE + DMM_LISA_MAP_3) = 0xFF020100;
++
++ /* DDR needs to be initialised @ 19.2 MHz
++ * So put core DPLL in bypass mode
++ * Configure the Core DPLL but don't lock it
++ */
++ configure_core_dpll_no_lock();
++
++ /* No IDLE: BUG in SDC */
++ //sr32(CM_MEMIF_CLKSTCTRL, 0, 32, 0x2);
++ //while(((*(volatile int*)CM_MEMIF_CLKSTCTRL) & 0x700) != 0x700);
++ *(volatile int*)(EMIF1_BASE + EMIF_PWR_MGMT_CTRL) = 0x0;
++ *(volatile int*)(EMIF2_BASE + EMIF_PWR_MGMT_CTRL) = 0x0;
++
++ base_addr = EMIF1_BASE;
++ emif_config(base_addr);
++
++ /* Configure EMIF24D */
++ base_addr = EMIF2_BASE;
++ emif_config(base_addr);
++ /* Lock Core using shadow CM_SHADOW_FREQ_CONFIG1 */
++ lock_core_dpll_shadow();
++ /* TODO: SDC needs few hacks to get DDR freq update working */
++
++ /* Set DLL_OVERRIDE = 0 */
++ *(volatile int*)CM_DLL_CTRL = 0x0;
++
++ delay(200);
++
++ /* Check for DDR PHY ready for EMIF1 & EMIF2 */
++ while((((*(volatile int*)(EMIF1_BASE + EMIF_STATUS))&(0x04)) != 0x04) \
++ || (((*(volatile int*)(EMIF2_BASE + EMIF_STATUS))&(0x04)) != 0x04));
++
++ /* Reprogram the DDR PYHY Control register */
++ /* PHY control values */
++
++ sr32(CM_MEMIF_EMIF_1_CLKCTRL, 0, 32, 0x1);
++ sr32(CM_MEMIF_EMIF_2_CLKCTRL, 0, 32, 0x1);
++
++ /* Put the Core Subsystem PD to ON State */
++
++ /* No IDLE: BUG in SDC */
++ //sr32(CM_MEMIF_CLKSTCTRL, 0, 32, 0x2);
++ //while(((*(volatile int*)CM_MEMIF_CLKSTCTRL) & 0x700) != 0x700);
++ *(volatile int*)(EMIF1_BASE + EMIF_PWR_MGMT_CTRL) = 0x80000000;
++ *(volatile int*)(EMIF2_BASE + EMIF_PWR_MGMT_CTRL) = 0x80000000;
++
++ /* SYSTEM BUG:
++ * In n a specific situation, the OCP interface between the DMM and
++ * EMIF may hang.
++ * 1. A TILER port is used to perform 2D burst writes of
++ * width 1 and height 8
++ * 2. ELLAn port is used to perform reads
++ * 3. All accesses are routed to the same EMIF controller
++ *
++ * Work around to avoid this issue REG_SYS_THRESH_MAX value should
++ * be kept higher than default 0x7. As per recommondation 0x0A will
++ * be used for better performance with REG_LL_THRESH_MAX = 0x00
++ */
++ if (rev == OMAP4430_ES1_0) {
++ *(volatile int*)(EMIF1_BASE + EMIF_L3_CONFIG) = 0x0A0000FF;
++ *(volatile int*)(EMIF2_BASE + EMIF_L3_CONFIG) = 0x0A0000FF;
++ }
++
++ /*
++ * DMM : DMM_LISA_MAP_0(Section_0)
++ * [31:24] SYS_ADDR 0x80
++ * [22:20] SYS_SIZE 0x7 - 2Gb
++ * [19:18] SDRC_INTLDMM 0x1 - 128 byte
++ * [17:16] SDRC_ADDRSPC 0x0
++ * [9:8] SDRC_MAP 0x3
++ * [7:0] SDRC_ADDR 0X0
++ */
++ reset_phy(EMIF1_BASE);
++ reset_phy(EMIF2_BASE);
++
++ *((volatile int *)0x80000000) = 0;
++ *((volatile int *)0x80000080) = 0;
++ //*((volatile int *)0x90000000) = 0;
++}
++/*****************************************
++ * Routine: board_init
++ * Description: Early hardware init.
++ *****************************************/
++int board_init(void)
++{
++ return 0;
++}
++
++/*************************************************************
++ * Routine: get_mem_type(void) - returns the kind of memory connected
++ * to GPMC that we are trying to boot form. Uses SYS BOOT settings.
++ *************************************************************/
++u32 get_mem_type(void)
++{
++ /* no nand, so return GPMC_NONE */
++ return GPMC_NONE;
++}
++
++/*****************************************
++ * Routine: secure_unlock
++ * Description: Setup security registers for access
++ * (GP Device only)
++ *****************************************/
++void secure_unlock_mem(void)
++{
++ /* Permission values for registers -Full fledged permissions to all */
++ #define UNLOCK_1 0xFFFFFFFF
++ #define UNLOCK_2 0x00000000
++ #define UNLOCK_3 0x0000FFFF
++
++ /* Protection Module Register Target APE (PM_RT)*/
++ __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1);
++ __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0);
++ __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0);
++ __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1);
++
++ __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0);
++ __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0);
++ __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0);
++
++ __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0);
++ __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0);
++ __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0);
++ __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2);
++
++ /* IVA Changes */
++ __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0);
++ __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0);
++ __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0);
++
++ __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */
++}
++
++/**********************************************************
++ * Routine: try_unlock_sram()
++ * Description: If chip is GP/EMU(special) type, unlock the SRAM for
++ * general use.
++ ***********************************************************/
++void try_unlock_memory(void)
++{
++ int mode;
++
++ /* if GP device unlock device SRAM for general use */
++ /* secure code breaks for Secure/Emulation device - HS/E/T*/
++ return;
++}
++
++
++#if defined(CONFIG_MPU_600) || defined(CONFIG_MPU_1000)
++static scale_vcores(void)
++{
++ unsigned int rev = omap_revision();
++ /* For VC bypass only VCOREx_CGF_FORCE is necessary and
++ * VCOREx_CFG_VOLTAGE changes can be discarded
++ */
++ /* PRM_VC_CFG_I2C_MODE */
++ *(volatile int*)(0x4A307BA8) = 0x0;
++ /* PRM_VC_CFG_I2C_CLK */
++ *(volatile int*)(0x4A307BAC) = 0x6026;
++
++ /* set VCORE1 force VSEL */
++ /* PRM_VC_VAL_BYPASS) */
++ if(rev == OMAP4430_ES1_0)
++ *(volatile int*)(0x4A307BA0) = 0x3B5512;
++ else
++ *(volatile int*)(0x4A307BA0) = 0x3A5512;
++
++ *(volatile int*)(0x4A307BA0) |= 0x1000000;
++ while((*(volatile int*)(0x4A307BA0)) & 0x1000000);
++
++ /* PRM_IRQSTATUS_MPU */
++ *(volatile int*)(0x4A306010) = *(volatile int*)(0x4A306010);
++
++
++ /* FIXME: set VCORE2 force VSEL, Check the reset value */
++ /* PRM_VC_VAL_BYPASS) */
++ if(rev == OMAP4430_ES1_0)
++ *(volatile int*)(0x4A307BA0) = 0x315B12;
++ else
++ *(volatile int*)(0x4A307BA0) = 0x295B12;
++ *(volatile int*)(0x4A307BA0) |= 0x1000000;
++ while((*(volatile int*)(0x4A307BA0)) & 0x1000000);
++
++ /* PRM_IRQSTATUS_MPU */
++ *(volatile int*)(0x4A306010) = *(volatile int*)(0x4A306010);
++
++ /*/set VCORE3 force VSEL */
++ /* PRM_VC_VAL_BYPASS */
++ if(rev == OMAP4430_ES1_0)
++ *(volatile int*)(0x4A307BA0) = 0x316112;
++ else if (rev == OMAP4430_ES2_0)
++ *(volatile int*)(0x4A307BA0) = 0x296112;
++ else if (rev == OMAP4430_ES2_1)
++ *(volatile int*)(0x4A307BA0) = 0x2A6112;
++ *(volatile int*)(0x4A307BA0) |= 0x1000000;
++ while((*(volatile int*)(0x4A307BA0)) & 0x1000000);
++
++ /* PRM_IRQSTATUS_MPU */
++ *(volatile int*)(0x4A306010) = *(volatile int*)(0x4A306010);
++
++}
++#endif
++
++/**********************************************************
++ * Routine: s_init
++ * Description: Does early system init of muxing and clocks.
++ * - Called path is with SRAM stack.
++ **********************************************************/
++
++void s_init(void)
++{
++ unsigned int rev = omap_revision();
++
++ set_muxconf_regs();
++ delay(100);
++
++ /* Writing to AuxCR in U-boot using SMI for GP/EMU DEV */
++ /* Currently SMI in Kernel on ES2 devices seems to have an isse
++ * Once that is resolved, we can postpone this config to kernel
++ */
++ //setup_auxcr(get_device_type(), external_boot);
++
++ ddr_init();
++
++/* Set VCORE1 = 1.3 V, VCORE2 = VCORE3 = 1.21V */
++#if defined(CONFIG_MPU_600) || defined(CONFIG_MPU_1000)
++ scale_vcores();
++#endif
++ prcm_init();
++
++ if(rev != OMAP4430_ES1_0) {
++ if (__raw_readl(0x4805D138) & (1<<22)) {
++ sr32(0x4A30a31C, 8, 1, 0x1); /* enable software ioreq */
++ sr32(0x4A30a31C, 1, 2, 0x0); /* set for sys_clk (38.4MHz) */
++ sr32(0x4A30a31C, 16, 4, 0x1); /* set divisor to 2 */
++ sr32(0x4A30a110, 0, 1, 0x1); /* set the clock source to active */
++ sr32(0x4A30a110, 2, 2, 0x3); /* enable clocks */
++ }
++ else {
++ sr32(0x4A30a314, 8, 1, 0x1); /* enable software ioreq */
++ sr32(0x4A30a314, 1, 2, 0x2); /* set for PER_DPLL */
++ sr32(0x4A30a314, 16, 4, 0xf); /* set divisor to 16 */
++ sr32(0x4A30a110, 0, 1, 0x1); /* set the clock source to active */
++ sr32(0x4A30a110, 2, 2, 0x3); /* enable clocks */
++ }
++ }
++
++}
++
++/*******************************************************
++ * Routine: misc_init_r
++ * Description: Init ethernet (done here so udelay works)
++ ********************************************************/
++int misc_init_r(void)
++{
++ return 0;
++}
++
++/******************************************************
++ * Routine: wait_for_command_complete
++ * Description: Wait for posting to finish on watchdog
++ ******************************************************/
++void wait_for_command_complete(unsigned int wd_base)
++{
++ int pending = 1;
++ do {
++ pending = __raw_readl(wd_base + WWPS);
++ } while (pending);
++}
++
++/*******************************************************************
++ * Routine:ether_init
++ * Description: take the Ethernet controller out of reset and wait
++ * for the EEPROM load to complete.
++ ******************************************************************/
++
++/**********************************************
++ * Routine: dram_init
++ * Description: sets uboots idea of sdram size
++ **********************************************/
++int dram_init(void)
++{
++ return 0;
++}
++
++#define OMAP44XX_WKUP_CTRL_BASE 0x4A31E000
++#if 1
++#define M0_SAFE M0
++#define M1_SAFE M1
++#define M2_SAFE M2
++#define M4_SAFE M4
++#define M7_SAFE M7
++#define M3_SAFE M3
++#define M5_SAFE M5
++#define M6_SAFE M6
++#else
++#define M0_SAFE M7
++#define M1_SAFE M7
++#define M2_SAFE M7
++#define M4_SAFE M7
++#define M7_SAFE M7
++#define M3_SAFE M7
++#define M5_SAFE M7
++#define M6_SAFE M7
++#endif
++#define MV(OFFSET, VALUE)\
++ __raw_writew((VALUE), OMAP44XX_CTRL_BASE + (OFFSET));
++#define MV1(OFFSET, VALUE)\
++ __raw_writew((VALUE), OMAP44XX_WKUP_CTRL_BASE + (OFFSET));
++
++#define CP(x) (CONTROL_PADCONF_##x)
++#define WK(x) (CONTROL_WKUP_##x)
++/*
++ * IEN - Input Enable
++ * IDIS - Input Disable
++ * PTD - Pull type Down
++ * PTU - Pull type Up
++ * DIS - Pull type selection is inactive
++ * EN - Pull type selection is active
++ * M0 - Mode 0
++ * The commented string gives the final mux configuration for that pin
++ */
++
++#define MUX_DEFAULT_OMAP4() \
++ MV(CP(GPMC_AD0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat0 */ \
++ MV(CP(GPMC_AD1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat1 */ \
++ MV(CP(GPMC_AD2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat2 */ \
++ MV(CP(GPMC_AD3) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat3 */ \
++ MV(CP(GPMC_AD4) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat4 */ \
++ MV(CP(GPMC_AD5) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat5 */ \
++ MV(CP(GPMC_AD6) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat6 */ \
++ MV(CP(GPMC_AD7) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat7 */ \
++ MV(CP(GPMC_AD8) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpio_32 */ \
++ MV(CP(GPMC_AD9) , ( PTU | IEN | M3)) /* gpio_33 */ \
++ MV(CP(GPMC_AD10) , ( PTU | IEN | M3)) /* gpio_34 */ \
++ MV(CP(GPMC_AD11) , ( PTU | IEN | M3)) /* gpio_35 */ \
++ MV(CP(GPMC_AD12) , ( PTU | IEN | M3)) /* gpio_36 */ \
++ MV(CP(GPMC_AD13) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_37 */ \
++ MV(CP(GPMC_AD14) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_38 */ \
++ MV(CP(GPMC_AD15) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_39 */ \
++ MV(CP(GPMC_A16) , ( M3)) /* gpio_40 */ \
++ MV(CP(GPMC_A17) , ( PTD | M3)) /* gpio_41 */ \
++ MV(CP(GPMC_A18) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row6 */ \
++ MV(CP(GPMC_A19) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row7 */ \
++ MV(CP(GPMC_A20) , ( IEN | M3)) /* gpio_44 */ \
++ MV(CP(GPMC_A21) , ( M3)) /* gpio_45 */ \
++ MV(CP(GPMC_A22) , ( M3)) /* gpio_46 */ \
++ MV(CP(GPMC_A23) , ( OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col7 */ \
++ MV(CP(GPMC_A24) , ( PTD | M3)) /* gpio_48 */ \
++ MV(CP(GPMC_A25) , ( PTD | M3)) /* gpio_49 */ \
++ MV(CP(GPMC_NCS0) , ( M3)) /* gpio_50 */ \
++ MV(CP(GPMC_NCS1) , ( IEN | M3)) /* gpio_51 */ \
++ MV(CP(GPMC_NCS2) , ( IEN | M3)) /* gpio_52 */ \
++ MV(CP(GPMC_NCS3) , ( IEN | M3)) /* gpio_53 */ \
++ MV(CP(GPMC_NWP) , ( M3)) /* gpio_54 */ \
++ MV(CP(GPMC_CLK) , ( PTD | M3)) /* gpio_55 */ \
++ MV(CP(GPMC_NADV_ALE) , ( M3)) /* gpio_56 */ \
++ MV(CP(GPMC_NOE) , ( PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)) /* sdmmc2_clk */ \
++ MV(CP(GPMC_NWE) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_cmd */ \
++ MV(CP(GPMC_NBE0_CLE) , ( M3)) /* gpio_59 */ \
++ MV(CP(GPMC_NBE1) , ( PTD | M3)) /* gpio_60 */ \
++ MV(CP(GPMC_WAIT0) , ( PTU | IEN | M3)) /* gpio_61 */ \
++ MV(CP(GPMC_WAIT1), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_62 */ \
++ MV(CP(C2C_DATA11) , ( PTD | M3)) /* gpio_100 */ \
++ MV(CP(C2C_DATA12) , ( PTD | IEN | M3)) /* gpio_101 */ \
++ MV(CP(C2C_DATA13) , ( PTD | M3)) /* gpio_102 */ \
++ MV(CP(C2C_DATA14) , ( M1)) /* dsi2_te0 */ \
++ MV(CP(C2C_DATA15) , ( PTD | M3)) /* gpio_104 */ \
++ MV(CP(HDMI_HPD) , ( M0)) /* hdmi_hpd */ \
++ MV(CP(HDMI_CEC) , ( M0)) /* hdmi_cec */ \
++ MV(CP(HDMI_DDC_SCL) , ( PTU | M0)) /* hdmi_ddc_scl */ \
++ MV(CP(HDMI_DDC_SDA) , ( PTU | IEN | M0)) /* hdmi_ddc_sda */ \
++ MV(CP(CSI21_DX0) , ( IEN | M0)) /* csi21_dx0 */ \
++ MV(CP(CSI21_DY0) , ( IEN | M0)) /* csi21_dy0 */ \
++ MV(CP(CSI21_DX1) , ( IEN | M0)) /* csi21_dx1 */ \
++ MV(CP(CSI21_DY1) , ( IEN | M0)) /* csi21_dy1 */ \
++ MV(CP(CSI21_DX2) , ( IEN | M0)) /* csi21_dx2 */ \
++ MV(CP(CSI21_DY2) , ( IEN | M0)) /* csi21_dy2 */ \
++ MV(CP(CSI21_DX3) , ( PTD | M7)) /* csi21_dx3 */ \
++ MV(CP(CSI21_DY3) , ( PTD | M7)) /* csi21_dy3 */ \
++ MV(CP(CSI21_DX4) , ( PTD | OFF_EN | OFF_PD | OFF_IN | M7)) /* csi21_dx4 */ \
++ MV(CP(CSI21_DY4) , ( PTD | OFF_EN | OFF_PD | OFF_IN | M7)) /* csi21_dy4 */ \
++ MV(CP(CSI22_DX0) , ( IEN | M0)) /* csi22_dx0 */ \
++ MV(CP(CSI22_DY0) , ( IEN | M0)) /* csi22_dy0 */ \
++ MV(CP(CSI22_DX1) , ( IEN | M0)) /* csi22_dx1 */ \
++ MV(CP(CSI22_DY1) , ( IEN | M0)) /* csi22_dy1 */ \
++ MV(CP(CAM_SHUTTER) , ( OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* cam_shutter */ \
++ MV(CP(CAM_STROBE) , ( OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* cam_strobe */ \
++ MV(CP(CAM_GLOBALRESET) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_83 */ \
++ MV(CP(USBB1_ULPITLL_CLK) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_clk */ \
++ MV(CP(USBB1_ULPITLL_STP) , ( OFF_EN | OFF_OUT_PTD | M4)) /* usbb1_ulpiphy_stp */ \
++ MV(CP(USBB1_ULPITLL_DIR) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dir */ \
++ MV(CP(USBB1_ULPITLL_NXT) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_nxt */ \
++ MV(CP(USBB1_ULPITLL_DAT0) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat0 */ \
++ MV(CP(USBB1_ULPITLL_DAT1) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat1 */ \
++ MV(CP(USBB1_ULPITLL_DAT2) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat2 */ \
++ MV(CP(USBB1_ULPITLL_DAT3) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat3 */ \
++ MV(CP(USBB1_ULPITLL_DAT4) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat4 */ \
++ MV(CP(USBB1_ULPITLL_DAT5) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat5 */ \
++ MV(CP(USBB1_ULPITLL_DAT6) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat6 */ \
++ MV(CP(USBB1_ULPITLL_DAT7) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat7 */ \
++ MV(CP(USBB1_HSIC_DATA) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usbb1_hsic_data */ \
++ MV(CP(USBB1_HSIC_STROBE) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usbb1_hsic_strobe */ \
++ MV(CP(USBC1_ICUSB_DP) , ( IEN | M0)) /* usbc1_icusb_dp */ \
++ MV(CP(USBC1_ICUSB_DM) , ( IEN | M0)) /* usbc1_icusb_dm */ \
++ MV(CP(SDMMC1_CLK) , ( PTU | OFF_EN | OFF_OUT_PTD | M0)) /* sdmmc1_clk */ \
++ MV(CP(SDMMC1_CMD) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_cmd */ \
++ MV(CP(SDMMC1_DAT0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat0 */ \
++ MV(CP(SDMMC1_DAT1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat1 */ \
++ MV(CP(SDMMC1_DAT2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat2 */ \
++ MV(CP(SDMMC1_DAT3) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat3 */ \
++ MV(CP(SDMMC1_DAT4) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat4 */ \
++ MV(CP(SDMMC1_DAT5) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat5 */ \
++ MV(CP(SDMMC1_DAT6) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat6 */ \
++ MV(CP(SDMMC1_DAT7) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat7 */ \
++ MV(CP(ABE_MCBSP2_CLKX) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp2_clkx */ \
++ MV(CP(ABE_MCBSP2_DR) , ( IEN | OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp2_dr */ \
++ MV(CP(ABE_MCBSP2_DX) , ( OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp2_dx */ \
++ MV(CP(ABE_MCBSP2_FSX) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp2_fsx */ \
++ MV(CP(ABE_MCBSP1_CLKX) , ( IEN | M1)) /* abe_slimbus1_clock */ \
++ MV(CP(ABE_MCBSP1_DR) , ( IEN | M1)) /* abe_slimbus1_data */ \
++ MV(CP(ABE_MCBSP1_DX) , ( OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp1_dx */ \
++ MV(CP(ABE_MCBSP1_FSX) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp1_fsx */ \
++ MV(CP(ABE_PDM_UL_DATA) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_pdm_ul_data */ \
++ MV(CP(ABE_PDM_DL_DATA) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_pdm_dl_data */ \
++ MV(CP(ABE_PDM_FRAME) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_pdm_frame */ \
++ MV(CP(ABE_PDM_LB_CLK) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_pdm_lb_clk */ \
++ MV(CP(ABE_CLKS) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_clks */ \
++ MV(CP(ABE_DMIC_CLK1) , ( M0)) /* abe_dmic_clk1 */ \
++ MV(CP(ABE_DMIC_DIN1) , ( IEN | M0)) /* abe_dmic_din1 */ \
++ MV(CP(ABE_DMIC_DIN2) , ( IEN | M0)) /* abe_dmic_din2 */ \
++ MV(CP(ABE_DMIC_DIN3) , ( IEN | M0)) /* abe_dmic_din3 */ \
++ MV(CP(UART2_CTS) , ( PTU | IEN | M0)) /* uart2_cts */ \
++ MV(CP(UART2_RTS) , ( M0)) /* uart2_rts */ \
++ MV(CP(UART2_RX) , ( PTU | IEN | M0)) /* uart2_rx */ \
++ MV(CP(UART2_TX) , ( M0)) /* uart2_tx */ \
++ MV(CP(HDQ_SIO) , ( M3)) /* gpio_127 */ \
++ MV(CP(I2C1_SCL) , ( PTU | IEN | M0)) /* i2c1_scl */ \
++ MV(CP(I2C1_SDA) , ( PTU | IEN | M0)) /* i2c1_sda */ \
++ MV(CP(I2C2_SCL) , ( PTU | IEN | M0)) /* i2c2_scl */ \
++ MV(CP(I2C2_SDA) , ( PTU | IEN | M0)) /* i2c2_sda */ \
++ MV(CP(I2C3_SCL) , ( PTU | IEN | M0)) /* i2c3_scl */ \
++ MV(CP(I2C3_SDA) , ( PTU | IEN | M0)) /* i2c3_sda */ \
++ MV(CP(I2C4_SCL) , ( PTU | IEN | M0)) /* i2c4_scl */ \
++ MV(CP(I2C4_SDA) , ( PTU | IEN | M0)) /* i2c4_sda */ \
++ MV(CP(MCSPI1_CLK) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_clk */ \
++ MV(CP(MCSPI1_SOMI) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_somi */ \
++ MV(CP(MCSPI1_SIMO) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_simo */ \
++ MV(CP(MCSPI1_CS0) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_cs0 */ \
++ MV(CP(MCSPI1_CS1) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* mcspi1_cs1 */ \
++ MV(CP(MCSPI1_CS2) , ( PTU | OFF_EN | OFF_OUT_PTU | M3)) /* gpio_139 */ \
++ MV(CP(MCSPI1_CS3) , ( PTU | IEN | M3)) /* gpio_140 */ \
++ MV(CP(UART3_CTS_RCTX) , ( PTU | IEN | M0)) /* uart3_tx */ \
++ MV(CP(UART3_RTS_SD) , ( M0)) /* uart3_rts_sd */ \
++ MV(CP(UART3_RX_IRRX) , ( IEN | M0)) /* uart3_rx */ \
++ MV(CP(UART3_TX_IRTX) , ( M0)) /* uart3_tx */ \
++ MV(CP(SDMMC5_CLK) , ( PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)) /* sdmmc5_clk */ \
++ MV(CP(SDMMC5_CMD) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_cmd */ \
++ MV(CP(SDMMC5_DAT0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat0 */ \
++ MV(CP(SDMMC5_DAT1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat1 */ \
++ MV(CP(SDMMC5_DAT2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat2 */ \
++ MV(CP(SDMMC5_DAT3) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat3 */ \
++ MV(CP(MCSPI4_CLK) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_clk */ \
++ MV(CP(MCSPI4_SIMO) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_simo */ \
++ MV(CP(MCSPI4_SOMI) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_somi */ \
++ MV(CP(MCSPI4_CS0) , ( PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_cs0 */ \
++ MV(CP(UART4_RX) , ( IEN | M0)) /* uart4_rx */ \
++ MV(CP(UART4_TX) , ( M0)) /* uart4_tx */ \
++ MV(CP(USBB2_ULPITLL_CLK) , ( IEN | M3)) /* gpio_157 */ \
++ MV(CP(USBB2_ULPITLL_STP) , ( IEN | M5)) /* dispc2_data23 */ \
++ MV(CP(USBB2_ULPITLL_DIR) , ( IEN | M5)) /* dispc2_data22 */ \
++ MV(CP(USBB2_ULPITLL_NXT) , ( IEN | M5)) /* dispc2_data21 */ \
++ MV(CP(USBB2_ULPITLL_DAT0) , ( IEN | M5)) /* dispc2_data20 */ \
++ MV(CP(USBB2_ULPITLL_DAT1) , ( IEN | M5)) /* dispc2_data19 */ \
++ MV(CP(USBB2_ULPITLL_DAT2) , ( IEN | M5)) /* dispc2_data18 */ \
++ MV(CP(USBB2_ULPITLL_DAT3) , ( IEN | M5)) /* dispc2_data15 */ \
++ MV(CP(USBB2_ULPITLL_DAT4) , ( IEN | M5)) /* dispc2_data14 */ \
++ MV(CP(USBB2_ULPITLL_DAT5) , ( IEN | M5)) /* dispc2_data13 */ \
++ MV(CP(USBB2_ULPITLL_DAT6) , ( IEN | M5)) /* dispc2_data12 */ \
++ MV(CP(USBB2_ULPITLL_DAT7) , ( IEN | M5)) /* dispc2_data11 */ \
++ MV(CP(USBB2_HSIC_DATA) , ( PTD | OFF_EN | OFF_OUT_PTU | M3)) /* gpio_169 */ \
++ MV(CP(USBB2_HSIC_STROBE) , ( PTD | OFF_EN | OFF_OUT_PTU | M3)) /* gpio_170 */ \
++ MV(CP(UNIPRO_TX0) , ( PTD | IEN | M3)) /* gpio_171 */ \
++ MV(CP(UNIPRO_TY0) , ( OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col1 */ \
++ MV(CP(UNIPRO_TX1) , ( OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col2 */ \
++ MV(CP(UNIPRO_TY1) , ( OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col3 */ \
++ MV(CP(UNIPRO_TX2) , ( PTU | IEN | M3)) /* gpio_0 */ \
++ MV(CP(UNIPRO_TY2) , ( PTU | IEN | M3)) /* gpio_1 */ \
++ MV(CP(UNIPRO_RX0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row0 */ \
++ MV(CP(UNIPRO_RY0) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row1 */ \
++ MV(CP(UNIPRO_RX1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row2 */ \
++ MV(CP(UNIPRO_RY1) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row3 */ \
++ MV(CP(UNIPRO_RX2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row4 */ \
++ MV(CP(UNIPRO_RY2) , ( PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row5 */ \
++ MV(CP(USBA0_OTG_CE) , ( PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* usba0_otg_ce */ \
++ MV(CP(USBA0_OTG_DP) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usba0_otg_dp */ \
++ MV(CP(USBA0_OTG_DM) , ( IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usba0_otg_dm */ \
++ MV(CP(FREF_CLK1_OUT) , ( M0)) /* fref_clk1_out */ \
++ MV(CP(FREF_CLK2_OUT) , ( PTD | IEN | M3)) /* gpio_182 */ \
++ MV(CP(SYS_NIRQ1) , ( PTU | IEN | M0)) /* sys_nirq1 */ \
++ MV(CP(SYS_NIRQ2) , ( PTU | IEN | M0)) /* sys_nirq2 */ \
++ MV(CP(SYS_BOOT0) , ( PTU | IEN | M3)) /* gpio_184 */ \
++ MV(CP(SYS_BOOT1) , ( M3)) /* gpio_185 */ \
++ MV(CP(SYS_BOOT2) , ( PTD | IEN | M3)) /* gpio_186 */ \
++ MV(CP(SYS_BOOT3) , ( M3)) /* gpio_187 */ \
++ MV(CP(SYS_BOOT4) , ( M3)) /* gpio_188 */ \
++ MV(CP(SYS_BOOT5) , ( PTD | IEN | M3)) /* gpio_189 */ \
++ MV(CP(DPM_EMU0) , ( IEN | M0)) /* dpm_emu0 */ \
++ MV(CP(DPM_EMU1) , ( IEN | M0)) /* dpm_emu1 */ \
++ MV(CP(DPM_EMU2) , ( IEN | M0)) /* dpm_emu2 */ \
++ MV(CP(DPM_EMU3) , ( IEN | M5)) /* dispc2_data10 */ \
++ MV(CP(DPM_EMU4) , ( IEN | M5)) /* dispc2_data9 */ \
++ MV(CP(DPM_EMU5) , ( IEN | M5)) /* dispc2_data16 */ \
++ MV(CP(DPM_EMU6) , ( IEN | M5)) /* dispc2_data17 */ \
++ MV(CP(DPM_EMU7) , ( IEN | M5)) /* dispc2_hsync */ \
++ MV(CP(DPM_EMU8) , ( IEN | M5)) /* dispc2_pclk */ \
++ MV(CP(DPM_EMU9) , ( IEN | M5)) /* dispc2_vsync */ \
++ MV(CP(DPM_EMU10) , ( IEN | M5)) /* dispc2_de */ \
++ MV(CP(DPM_EMU11) , ( IEN | M5)) /* dispc2_data8 */ \
++ MV(CP(DPM_EMU12) , ( IEN | M5)) /* dispc2_data7 */ \
++ MV(CP(DPM_EMU13) , ( IEN | M5)) /* dispc2_data6 */ \
++ MV(CP(DPM_EMU14) , ( IEN | M5)) /* dispc2_data5 */ \
++ MV(CP(DPM_EMU15) , ( IEN | M5)) /* dispc2_data4 */ \
++ MV(CP(DPM_EMU16) , ( M3)) /* gpio_27 */ \
++ MV(CP(DPM_EMU17) , ( IEN | M5)) /* dispc2_data2 */ \
++ MV(CP(DPM_EMU18) , ( IEN | M5)) /* dispc2_data1 */ \
++ MV(CP(DPM_EMU19) , ( IEN | M5)) /* dispc2_data0 */ \
++ MV1(WK(PAD0_SIM_IO) , ( IEN | M0)) /* sim_io */ \
++ MV1(WK(PAD1_SIM_CLK) , ( M0)) /* sim_clk */ \
++ MV1(WK(PAD0_SIM_RESET) , ( M0)) /* sim_reset */ \
++ MV1(WK(PAD1_SIM_CD) , ( PTU | IEN | M0)) /* sim_cd */ \
++ MV1(WK(PAD0_SIM_PWRCTRL) , ( M0)) /* sim_pwrctrl */ \
++ MV1(WK(PAD1_SR_SCL) , ( PTU | IEN | M0)) /* sr_scl */ \
++ MV1(WK(PAD0_SR_SDA) , ( PTU | IEN | M0)) /* sr_sda */ \
++ MV1(WK(PAD1_FREF_XTAL_IN) , ( M0)) /* # */ \
++ MV1(WK(PAD0_FREF_SLICER_IN) , ( M0)) /* fref_slicer_in */ \
++ MV1(WK(PAD1_FREF_CLK_IOREQ) , ( M0)) /* fref_clk_ioreq */ \
++ MV1(WK(PAD0_FREF_CLK0_OUT) , ( M2)) /* sys_drm_msecure */ \
++ MV1(WK(PAD1_FREF_CLK3_REQ) , ( PTU | IEN | M0)) /* # */ \
++ MV1(WK(PAD0_FREF_CLK3_OUT) , ( M0)) /* fref_clk3_out */ \
++ MV1(WK(PAD1_FREF_CLK4_REQ) , ( PTU | IEN | M0)) /* # */ \
++ MV1(WK(PAD0_FREF_CLK4_OUT) , ( M0)) /* # */ \
++ MV1(WK(PAD1_SYS_32K) , ( IEN | M0)) /* sys_32k */ \
++ MV1(WK(PAD0_SYS_NRESPWRON) , ( M0)) /* sys_nrespwron */ \
++ MV1(WK(PAD1_SYS_NRESWARM) , ( M0)) /* sys_nreswarm */ \
++ MV1(WK(PAD0_SYS_PWR_REQ) , ( PTU | M0)) /* sys_pwr_req */ \
++ MV1(WK(PAD1_SYS_PWRON_RESET) , ( M3)) /* gpio_wk29 */ \
++ MV1(WK(PAD0_SYS_BOOT6) , ( IEN | M3)) /* gpio_wk9 */ \
++ MV1(WK(PAD1_SYS_BOOT7) , ( IEN | M3)) /* gpio_wk10 */ \
++ MV1(WK(PAD1_FREF_CLK3_REQ), (M3)) /* gpio_wk30 */ \
++ MV1(WK(PAD1_FREF_CLK4_REQ), (M3)) /* gpio_wk7 */ \
++ MV1(WK(PAD0_FREF_CLK4_OUT), (M3)) /* gpio_wk8 */
++
++#define MUX_DEFAULT_OMAP4_ALL() \
++ MV(CP(GPMC_AD0), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat0 */ \
++ MV(CP(GPMC_AD1), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat1 */ \
++ MV(CP(GPMC_AD2), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat2 */ \
++ MV(CP(GPMC_AD3), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat3 */ \
++ MV(CP(GPMC_AD4), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat4 */ \
++ MV(CP(GPMC_AD5), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat5 */ \
++ MV(CP(GPMC_AD6), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat6 */ \
++ MV(CP(GPMC_AD7), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_dat7 */ \
++ MV(CP(GPMC_AD8), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpio_32 */ \
++ MV(CP(GPMC_AD9), (M3_SAFE)) /* gpio_33 */ \
++ MV(CP(GPMC_AD10), (M3_SAFE)) /* gpio_34 */ \
++ MV(CP(GPMC_AD11), (M3_SAFE)) /* gpio_35 */ \
++ MV(CP(GPMC_AD12), (M3_SAFE)) /* gpio_36 */ \
++ MV(CP(GPMC_AD13), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_37 */ \
++ MV(CP(GPMC_AD14), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_38 */ \
++ MV(CP(GPMC_AD15), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_39 */ \
++ MV(CP(GPMC_A16), (M3_SAFE)) /* gpio_40 */ \
++ MV(CP(GPMC_A17), (M3_SAFE)) /* gpio_41 */ \
++ MV(CP(GPMC_A18), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row6 */ \
++ MV(CP(GPMC_A19), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row7 */ \
++ MV(CP(GPMC_A20), (M3_SAFE)) /* gpio_44 */ \
++ MV(CP(GPMC_A21), (M3_SAFE)) /* gpio_45 */ \
++ MV(CP(GPMC_A22), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col6 */ \
++ MV(CP(GPMC_A23), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col7 */ \
++ MV(CP(GPMC_A24), (M3_SAFE)) /* gpio_48 */ \
++ MV(CP(GPMC_A25), (M3_SAFE)) /* gpio_49 */ \
++ MV(CP(GPMC_NCS0), (M0)) /* gpmc_ncs0 */ \
++ MV(CP(GPMC_NCS1), (M3_SAFE)) /* gpio_51 */ \
++ MV(CP(GPMC_NCS2), (M3_SAFE)) /* gpio_52 */ \
++ MV(CP(GPMC_NCS3), (M3_SAFE)) /* gpio_53 */ \
++ MV(CP(GPMC_NWP), (M0_SAFE)) /* gpmc_nwp */ \
++ MV(CP(GPMC_CLK), (M3_SAFE)) /* gpio_55 */ \
++ MV(CP(GPMC_NADV_ALE), (M0)) /* gpmc_nadv_ale */ \
++ MV(CP(GPMC_NOE), (PTU | OFF_EN | OFF_OUT_PTD | M1)) /* sdmmc2_clk */ \
++ MV(CP(GPMC_NWE), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* sdmmc2_cmd */ \
++ MV(CP(GPMC_NBE0_CLE), (M0)) /* gpmc_nbe0_cle*/ \
++ MV(CP(GPMC_NBE1), (M3_SAFE)) /* gpio_60 */ \
++ MV(CP(GPMC_WAIT0), (M0)) /* gpmc_wait */ \
++ MV(CP(GPMC_WAIT1), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_39 */ \
++ MV(CP(C2C_DATA11), (M3_SAFE)) /* gpio_100 */ \
++ MV(CP(C2C_DATA12), (M1_SAFE)) /* dsi1_te0 */ \
++ MV(CP(C2C_DATA13), (M3_SAFE)) /* gpio_102 */ \
++ MV(CP(C2C_DATA14), (M1_SAFE)) /* dsi2_te0 */ \
++ MV(CP(C2C_DATA15), (M3_SAFE)) /* gpio_104 */ \
++ MV(CP(HDMI_HPD), (M0_SAFE)) /* hdmi_hpd */ \
++ MV(CP(HDMI_CEC), (M0_SAFE)) /* hdmi_cec */ \
++ MV(CP(HDMI_DDC_SCL), (M0_SAFE)) /* hdmi_ddc_scl */ \
++ MV(CP(HDMI_DDC_SDA), (M0_SAFE)) /* hdmi_ddc_sda */ \
++ MV(CP(CSI21_DX0), (M0_SAFE)) /* csi21_dx0 */ \
++ MV(CP(CSI21_DY0), (M0_SAFE)) /* csi21_dy0 */ \
++ MV(CP(CSI21_DX1), (M0_SAFE)) /* csi21_dx1 */ \
++ MV(CP(CSI21_DY1), (M0_SAFE)) /* csi21_dy1 */ \
++ MV(CP(CSI21_DX2), (M0_SAFE)) /* csi21_dx2 */ \
++ MV(CP(CSI21_DY2), (M0_SAFE)) /* csi21_dy2 */ \
++ MV(CP(CSI21_DX3), (M0_SAFE)) /* csi21_dx3 */ \
++ MV(CP(CSI21_DY3), (M0_SAFE)) /* csi21_dy3 */ \
++ MV(CP(CSI21_DX4), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpi_75 */ \
++ MV(CP(CSI21_DY4), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpi_76 */ \
++ MV(CP(CSI22_DX0), (M0_SAFE)) /* csi22_dx0 */ \
++ MV(CP(CSI22_DY0), (M0_SAFE)) /* csi22_dy0 */ \
++ MV(CP(CSI22_DX1), (M0_SAFE)) /* csi22_dx1 */ \
++ MV(CP(CSI22_DY1), (M0_SAFE)) /* csi22_dy1 */ \
++ MV(CP(CAM_SHUTTER), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* cam_shutter */ \
++ MV(CP(CAM_STROBE), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* cam_strobe */ \
++ MV(CP(CAM_GLOBALRESET), (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)) /* gpio_83 */ \
++ MV(CP(USBB1_ULPITLL_CLK), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_clk */ \
++ MV(CP(USBB1_ULPITLL_STP), (PTU | OFF_EN | OFF_OUT_PTD | M4)) /* usbb1_ulpiphy_stp */ \
++ MV(CP(USBB1_ULPITLL_DIR), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dir */ \
++ MV(CP(USBB1_ULPITLL_NXT), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_nxt */ \
++ MV(CP(USBB1_ULPITLL_DAT0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat0 */ \
++ MV(CP(USBB1_ULPITLL_DAT1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat1 */ \
++ MV(CP(USBB1_ULPITLL_DAT2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat2 */ \
++ MV(CP(USBB1_ULPITLL_DAT3), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat3 */ \
++ MV(CP(USBB1_ULPITLL_DAT4), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat4 */ \
++ MV(CP(USBB1_ULPITLL_DAT5), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat5 */ \
++ MV(CP(USBB1_ULPITLL_DAT6), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat6 */ \
++ MV(CP(USBB1_ULPITLL_DAT7), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)) /* usbb1_ulpiphy_dat7 */ \
++ MV(CP(USBB1_HSIC_DATA), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usbb1_hsic_data */ \
++ MV(CP(USBB1_HSIC_STROBE), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usbb1_hsic_strobe */ \
++ MV(CP(USBC1_ICUSB_DP), (M0_SAFE)) /* usbc1_icusb_dp */ \
++ MV(CP(USBC1_ICUSB_DM), (M0_SAFE)) /* usbc1_icusb_dm */ \
++ MV(CP(SDMMC1_CLK), (PTU | OFF_EN | OFF_OUT_PTD | M0)) /* sdmmc1_clk */ \
++ MV(CP(SDMMC1_CMD), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_cmd */ \
++ MV(CP(SDMMC1_DAT0), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat0 */ \
++ MV(CP(SDMMC1_DAT1), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat1 */ \
++ MV(CP(SDMMC1_DAT2), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat2 */ \
++ MV(CP(SDMMC1_DAT3), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat3 */ \
++ MV(CP(SDMMC1_DAT4), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat4 */ \
++ MV(CP(SDMMC1_DAT5), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat5 */ \
++ MV(CP(SDMMC1_DAT6), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat6 */ \
++ MV(CP(SDMMC1_DAT7), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc1_dat7 */ \
++ MV(CP(ABE_MCBSP2_CLKX), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp2_clkx */ \
++ MV(CP(ABE_MCBSP2_DR), (IEN | OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp2_dr */ \
++ MV(CP(ABE_MCBSP2_DX), (OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp2_dx */ \
++ MV(CP(ABE_MCBSP2_FSX), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp2_fsx */ \
++ MV(CP(ABE_MCBSP1_CLKX), (M1_SAFE)) /* abe_slimbus1_clock */ \
++ MV(CP(ABE_MCBSP1_DR), (M1_SAFE)) /* abe_slimbus1_data */ \
++ MV(CP(ABE_MCBSP1_DX), (OFF_EN | OFF_OUT_PTD | M0)) /* abe_mcbsp1_dx */ \
++ MV(CP(ABE_MCBSP1_FSX), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* abe_mcbsp1_fsx */ \
++ MV(CP(ABE_PDM_UL_DATA), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_pdm_ul_data */ \
++ MV(CP(ABE_PDM_DL_DATA), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_pdm_dl_data */ \
++ MV(CP(ABE_PDM_FRAME), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_pdm_frame */ \
++ MV(CP(ABE_PDM_LB_CLK), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_pdm_lb_clk */ \
++ MV(CP(ABE_CLKS), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* abe_clks */ \
++ MV(CP(ABE_DMIC_CLK1), (M0_SAFE)) /* abe_dmic_clk1 */ \
++ MV(CP(ABE_DMIC_DIN1), (M0_SAFE)) /* abe_dmic_din1 */ \
++ MV(CP(ABE_DMIC_DIN2), (M0_SAFE)) /* abe_dmic_din2 */ \
++ MV(CP(ABE_DMIC_DIN3), (M0_SAFE)) /* abe_dmic_din3 */ \
++ MV(CP(UART2_CTS), (PTU | IEN | M0)) /* uart2_cts */ \
++ MV(CP(UART2_RTS), (M0)) /* uart2_rts */ \
++ MV(CP(UART2_RX), (PTU | IEN | M0)) /* uart2_rx */ \
++ MV(CP(UART2_TX), (M0)) /* uart2_tx */ \
++ MV(CP(HDQ_SIO), (M3_SAFE)) /* gpio_127 */ \
++ MV(CP(I2C1_SCL), (PTU | IEN | M0)) /* i2c1_scl */ \
++ MV(CP(I2C1_SDA), (PTU | IEN | M0)) /* i2c1_sda */ \
++ MV(CP(I2C2_SCL), (PTU | IEN | M0)) /* i2c2_scl */ \
++ MV(CP(I2C2_SDA), (PTU | IEN | M0)) /* i2c2_sda */ \
++ MV(CP(I2C3_SCL), (PTU | IEN | M0)) /* i2c3_scl */ \
++ MV(CP(I2C3_SDA), (PTU | IEN | M0)) /* i2c3_sda */ \
++ MV(CP(I2C4_SCL), (PTU | IEN | M0)) /* i2c4_scl */ \
++ MV(CP(I2C4_SDA), (PTU | IEN | M0)) /* i2c4_sda */ \
++ MV(CP(MCSPI1_CLK), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_clk */ \
++ MV(CP(MCSPI1_SOMI), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_somi */ \
++ MV(CP(MCSPI1_SIMO), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_simo */ \
++ MV(CP(MCSPI1_CS0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi1_cs0 */ \
++ MV(CP(MCSPI1_CS1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0_SAFE)) /* mcspi1_cs1 */ \
++ MV(CP(MCSPI1_CS2), (OFF_EN | OFF_OUT_PTU | M3)) /* gpio_139 */ \
++ MV(CP(MCSPI1_CS3), (M3_SAFE)) /* gpio_140 */ \
++ MV(CP(UART3_CTS_RCTX), (PTU | IEN | M0)) /* uart3_tx */ \
++ MV(CP(UART3_RTS_SD), (M0)) /* uart3_rts_sd */ \
++ MV(CP(UART3_RX_IRRX), (IEN | M0)) /* uart3_rx */ \
++ MV(CP(UART3_TX_IRTX), (M0)) /* uart3_tx */ \
++ MV(CP(SDMMC5_CLK), (PTU | OFF_EN | OFF_OUT_PTD | M0)) /* sdmmc5_clk */ \
++ MV(CP(SDMMC5_CMD), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_cmd */ \
++ MV(CP(SDMMC5_DAT0), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat0 */ \
++ MV(CP(SDMMC5_DAT1), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat1 */ \
++ MV(CP(SDMMC5_DAT2), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat2 */ \
++ MV(CP(SDMMC5_DAT3), (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* sdmmc5_dat3 */ \
++ MV(CP(MCSPI4_CLK), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_clk */ \
++ MV(CP(MCSPI4_SIMO), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_simo */ \
++ MV(CP(MCSPI4_SOMI), (IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_somi */ \
++ MV(CP(MCSPI4_CS0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* mcspi4_cs0 */ \
++ MV(CP(UART4_RX), (IEN | M0)) /* uart4_rx */ \
++ MV(CP(UART4_TX), (M0)) /* uart4_tx */ \
++ MV(CP(USBB2_ULPITLL_CLK), (M3)) /* gpio_157 */ \
++ MV(CP(USBB2_ULPITLL_STP), (M5)) /* dispc2_data23 */ \
++ MV(CP(USBB2_ULPITLL_DIR), (M5)) /* dispc2_data22 */ \
++ MV(CP(USBB2_ULPITLL_NXT), (M5)) /* dispc2_data21 */ \
++ MV(CP(USBB2_ULPITLL_DAT0), (M5)) /* dispc2_data20 */ \
++ MV(CP(USBB2_ULPITLL_DAT1), (M5)) /* dispc2_data19 */ \
++ MV(CP(USBB2_ULPITLL_DAT2), (M5)) /* dispc2_data18 */ \
++ MV(CP(USBB2_ULPITLL_DAT3), (M5)) /* dispc2_data15 */ \
++ MV(CP(USBB2_ULPITLL_DAT4), (M5)) /* dispc2_data14 */ \
++ MV(CP(USBB2_ULPITLL_DAT5), (M5)) /* dispc2_data13 */ \
++ MV(CP(USBB2_ULPITLL_DAT6), (M5)) /* dispc2_data12 */ \
++ MV(CP(USBB2_ULPITLL_DAT7), (M5)) /* dispc2_data11 */ \
++ MV(CP(USBB2_HSIC_DATA), (OFF_EN | OFF_OUT_PTU | M3)) /* gpio_169 */ \
++ MV(CP(USBB2_HSIC_STROBE), (OFF_EN | OFF_OUT_PTU | M3)) /* gpio_170 */ \
++ MV(CP(UNIPRO_TX0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col0 */ \
++ MV(CP(UNIPRO_TY0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col1 */ \
++ MV(CP(UNIPRO_TX1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col2 */ \
++ MV(CP(UNIPRO_TY1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_col3 */ \
++ MV(CP(UNIPRO_TX2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpio_0 */ \
++ MV(CP(UNIPRO_TY2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)) /* gpio_1 */ \
++ MV(CP(UNIPRO_RX0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row0 */ \
++ MV(CP(UNIPRO_RY0), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row1 */ \
++ MV(CP(UNIPRO_RX1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row2 */ \
++ MV(CP(UNIPRO_RY1), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row3 */ \
++ MV(CP(UNIPRO_RX2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row4 */ \
++ MV(CP(UNIPRO_RY2), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M1)) /* kpd_row5 */ \
++ MV(CP(USBA0_OTG_CE), (PTU | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)) /* usba0_otg_ce */ \
++ MV(CP(USBA0_OTG_DP), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usba0_otg_dp */ \
++ MV(CP(USBA0_OTG_DM), (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)) /* usba0_otg_dm */ \
++ MV(CP(FREF_CLK1_OUT), (M0_SAFE)) /* fref_clk1_out */ \
++ MV(CP(FREF_CLK2_OUT), (M0_SAFE)) /* fref_clk2_out */ \
++ MV(CP(SYS_NIRQ1), (PTU | IEN | M0)) /* sys_nirq1 */ \
++ MV(CP(SYS_NIRQ2), (PTU | IEN | M0)) /* sys_nirq2 */ \
++ MV(CP(SYS_BOOT0), (M3_SAFE)) /* gpio_184 */ \
++ MV(CP(SYS_BOOT1), (M3_SAFE)) /* gpio_185 */ \
++ MV(CP(SYS_BOOT2), (M3_SAFE)) /* gpio_186 */ \
++ MV(CP(SYS_BOOT3), (M3_SAFE)) /* gpio_187 */ \
++ MV(CP(SYS_BOOT4), (M3_SAFE)) /* gpio_188 */ \
++ MV(CP(SYS_BOOT5), (M3_SAFE)) /* gpio_189 */ \
++ MV(CP(DPM_EMU0), (M0_SAFE)) /* dpm_emu0 */ \
++ MV(CP(DPM_EMU1), (M0_SAFE)) /* dpm_emu1 */ \
++ MV(CP(DPM_EMU2), (M0_SAFE)) /* dpm_emu2 */ \
++ MV(CP(DPM_EMU3), (M5)) /* dispc2_data10 */ \
++ MV(CP(DPM_EMU4), (M5)) /* dispc2_data9 */ \
++ MV(CP(DPM_EMU5), (M5)) /* dispc2_data16 */ \
++ MV(CP(DPM_EMU6), (M5)) /* dispc2_data17 */ \
++ MV(CP(DPM_EMU7), (M5)) /* dispc2_hsync */ \
++ MV(CP(DPM_EMU8), (M5)) /* dispc2_pclk */ \
++ MV(CP(DPM_EMU9), (M5)) /* dispc2_vsync */ \
++ MV(CP(DPM_EMU10), (M5)) /* dispc2_de */ \
++ MV(CP(DPM_EMU11), (M5)) /* dispc2_data8 */ \
++ MV(CP(DPM_EMU12), (M5)) /* dispc2_data7 */ \
++ MV(CP(DPM_EMU13), (M5)) /* dispc2_data6 */ \
++ MV(CP(DPM_EMU14), (M5)) /* dispc2_data5 */ \
++ MV(CP(DPM_EMU15), (M5)) /* dispc2_data4 */ \
++ MV(CP(DPM_EMU16), (M5)) /* dispc2_data3/dmtimer8_pwm_evt */ \
++ MV(CP(DPM_EMU17), (M5)) /* dispc2_data2 */ \
++ MV(CP(DPM_EMU18), (M5)) /* dispc2_data1 */ \
++ MV(CP(DPM_EMU19), (M5)) /* dispc2_data0 */ \
++ MV1(WK(PAD0_SIM_IO), (M0_SAFE)) /* sim_io */ \
++ MV1(WK(PAD1_SIM_CLK), (M0_SAFE)) /* sim_clk */ \
++ MV1(WK(PAD0_SIM_RESET), (M0_SAFE)) /* sim_reset */ \
++ MV1(WK(PAD1_SIM_CD), (M0_SAFE)) /* sim_cd */ \
++ MV1(WK(PAD0_SIM_PWRCTRL), (M0_SAFE)) /* sim_pwrctrl */ \
++ MV1(WK(PAD1_SR_SCL), (PTU | IEN | M0)) /* sr_scl */ \
++ MV1(WK(PAD0_SR_SDA), (PTU | IEN | M0)) /* sr_sda */ \
++ MV1(WK(PAD1_FREF_XTAL_IN), (M0_SAFE)) /* # */ \
++ MV1(WK(PAD0_FREF_SLICER_IN), (M0_SAFE)) /* fref_slicer_in */ \
++ MV1(WK(PAD1_FREF_CLK_IOREQ), (M0_SAFE)) /* fref_clk_ioreq */ \
++ MV1(WK(PAD0_FREF_CLK0_OUT), (M0)) /* sys_drm_msecure */ \
++ MV1(WK(PAD1_FREF_CLK3_REQ), (M0)) /* # */ \
++ MV1(WK(PAD0_FREF_CLK3_OUT), (M0_SAFE)) /* fref_clk3_out */ \
++ MV1(WK(PAD1_FREF_CLK4_REQ), (M0_SAFE)) /* # */ \
++ MV1(WK(PAD0_FREF_CLK4_OUT), (M0_SAFE)) /* # */ \
++ MV1(WK(PAD1_SYS_32K), (IEN | M0_SAFE)) /* sys_32k */ \
++ MV1(WK(PAD0_SYS_NRESPWRON), (IEN | M0_SAFE)) /* sys_nrespwron */ \
++ MV1(WK(PAD1_SYS_NRESWARM), (IEN | M0_SAFE)) /* sys_nreswarm */ \
++ MV1(WK(PAD0_SYS_PWR_REQ), (M0_SAFE)) /* sys_pwr_req */ \
++ MV1(WK(PAD1_SYS_PWRON_RESET), (M3_SAFE)) /* gpio_wk29 */ \
++ MV1(WK(PAD0_SYS_BOOT6), (M3_SAFE)) /* gpio_wk9 */ \
++ MV1(WK(PAD1_SYS_BOOT7), (M3_SAFE)) /* gpio_wk10 */ \
++ MV1(WK(PAD1_JTAG_TCK), (IEN | M0)) /* jtag_tck */ \
++ MV1(WK(PAD0_JTAG_RTCK), (M0)) /* jtag_rtck */ \
++ MV1(WK(PAD1_JTAG_TMS_TMSC), (IEN | M0)) /* jtag_tms_tmsc */ \
++ MV1(WK(PAD0_JTAG_TDI), (IEN | M0)) /* jtag_tdi */ \
++ MV1(WK(PAD1_JTAG_TDO), (M0)) /* jtag_tdo */
++
++/**********************************************************
++ * Routine: set_muxconf_regs
++ * Description: Setting up the configuration Mux registers
++ * specific to the hardware. Many pins need
++ * to be moved from protect to primary mode.
++ *********************************************************/
++void set_muxconf_regs(void)
++{
++ MUX_DEFAULT_OMAP4();
++ return;
++}
++
++/******************************************************************************
++ * Routine: update_mux()
++ * Description:Update balls which are different between boards. All should be
++ * updated to match functionality. However, I'm only updating ones
++ * which I'll be using for now. When power comes into play they
++ * all need updating.
++ *****************************************************************************/
++void update_mux(u32 btype, u32 mtype)
++{
++ /* REVISIT */
++ return;
++
++}
++
++/* optionally do something like blinking LED */
++void board_hang (void)
++{ while (0) {};}
++
++int nand_init(void)
++{
++ return 0;
++}
++void reset_phy(unsigned int base)
++{
++ *(volatile int*)(base + IODFT_TLGC) |= (1 << 10);
++}
+diff -uNr x-load-f243938.orig/board/omap4430panda/platform.S x-load-f243938/board/omap4430panda/platform.S
+--- x-load-f243938.orig/board/omap4430panda/platform.S 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/board/omap4430panda/platform.S 2012-06-07 14:45:39.445648666 -0300
+@@ -0,0 +1,51 @@
++/*
++ * Board specific setup info
++ *
++ * (C) Copyright 2004-2006
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <config.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/mem.h>
++#include <asm/arch/clocks.h>
++
++_TEXT_BASE:
++ .word TEXT_BASE /* sdram load addr from config.mk */
++
++.globl lowlevel_init
++lowlevel_init:
++ ldr sp, SRAM_STACK
++ str ip, [sp] /* stash old link register */
++ mov ip, lr /* save link reg across call */
++ bl s_init /* go setup pll,mux,memory */
++ ldr ip, [sp] /* restore save ip */
++ mov lr, ip /* restore link reg */
++
++ /* back to arch calling code */
++ mov pc, lr
++
++ /* the literal pools origin */
++ .ltorg
++
++SRAM_STACK:
++ .word LOW_LEVEL_SRAM_STACK
+diff -uNr x-load-f243938.orig/board/omap4430panda/syslib.c x-load-f243938/board/omap4430panda/syslib.c
+--- x-load-f243938.orig/board/omap4430panda/syslib.c 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/board/omap4430panda/syslib.c 2012-06-07 14:45:39.445648666 -0300
+@@ -0,0 +1,73 @@
++/*
++ * (C) Copyright 2006
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <asm/arch/cpu.h>
++#include <asm/io.h>
++#include <asm/arch/bits.h>
++#include <asm/arch/mem.h>
++#include <asm/arch/clocks.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/sys_info.h>
++
++/************************************************************
++ * sdelay() - simple spin loop. Will be constant time as
++ * its generally used in bypass conditions only. This
++ * is necessary until timers are accessible.
++ *
++ * not inline to increase chances its in cache when called
++ *************************************************************/
++void sdelay(unsigned long loops)
++{
++ __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
++ "bne 1b":"=r" (loops):"0"(loops));
++}
++
++/*****************************************************************
++ * sr32 - clear & set a value in a bit range for a 32 bit address
++ *****************************************************************/
++void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value)
++{
++ u32 tmp, msk = 0;
++ msk = 1 << num_bits;
++ --msk;
++ tmp = __raw_readl(addr) & ~(msk << start_bit);
++ tmp |= value << start_bit;
++ __raw_writel(tmp, addr);
++}
++
++/*********************************************************************
++ * wait_on_value() - common routine to allow waiting for changes in
++ * volatile regs.
++ *********************************************************************/
++u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
++{
++ u32 i = 0, val;
++ do {
++ ++i;
++ val = __raw_readl(read_addr) & read_bit_mask;
++ if (val == match_value)
++ return (1);
++ if (i == bound)
++ return (0);
++ } while (1);
++}
++
+diff -uNr x-load-f243938.orig/board/omap4430panda/x-load.lds x-load-f243938/board/omap4430panda/x-load.lds
+--- x-load-f243938.orig/board/omap4430panda/x-load.lds 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/board/omap4430panda/x-load.lds 2012-06-07 14:45:39.445648666 -0300
+@@ -0,0 +1,54 @@
++/*
++ * November 2006 - Changed to support 3430sdp device
++ * Copyright (c) 2004-2006 Texas Instruments
++ *
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++ . = 0x00000000;
++
++ . = ALIGN(4);
++ .text :
++ {
++ cpu/omap4/start.o (.text)
++ *(.text)
++ }
++
++ . = ALIGN(4);
++ .rodata : { *(.rodata) }
++
++ . = ALIGN(4);
++ .data : { *(.data) }
++
++ . = ALIGN(4);
++ .got : { *(.got) }
++
++ . = ALIGN(4);
++ __bss_start = .;
++ .bss : { *(.bss) }
++ _end = .;
++}
+diff -uNr x-load-f243938.orig/board/overo/config.mk x-load-f243938/board/overo/config.mk
+--- x-load-f243938.orig/board/overo/config.mk 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/board/overo/config.mk 2012-06-07 14:45:39.445648666 -0300
+@@ -10,11 +10,11 @@
+ # 8000'0000 (bank0)
+
+ # For use if you want X-Loader to relocate from SRAM to DDR
+-TEXT_BASE = 0x80e80000
++#TEXT_BASE = 0x80e80000
+
+ # For XIP in 64K of SRAM or debug (GP device has it all availabe)
+ # SRAM 40200000-4020FFFF base
+ # initial stack at 0x4020fffc used in s_init (below xloader).
+ # The run time stack is (above xloader, 2k below)
+ # If any globals exist there needs to be room for them also
+-#TEXT_BASE = 0x40200800
++TEXT_BASE = 0x40200800
+diff -uNr x-load-f243938.orig/board/overo/overo.c x-load-f243938/board/overo/overo.c
+--- x-load-f243938.orig/board/overo/overo.c 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/board/overo/overo.c 2012-06-07 14:45:39.445648666 -0300
+@@ -30,14 +30,21 @@
+ #include <command.h>
+ #include <part.h>
+ #include <fat.h>
++#include <i2c.h>
+ #include <asm/arch/cpu.h>
+ #include <asm/arch/bits.h>
++#include <asm/arch/gpio.h>
+ #include <asm/arch/mux.h>
+ #include <asm/arch/sys_proto.h>
+ #include <asm/arch/sys_info.h>
+ #include <asm/arch/clocks.h>
+ #include <asm/arch/mem.h>
+
++/* params for 37XX */
++#define CORE_DPLL_PARAM_M2 0x09
++#define CORE_DPLL_PARAM_M 0x360
++#define CORE_DPLL_PARAM_N 0xC
++
+ /* Used to index into DPLL parameter tables */
+ struct dpll_param {
+ unsigned int m;
+@@ -59,6 +66,16 @@
+ #define __raw_readw(a) (*(volatile unsigned short *)(a))
+ #define __raw_writew(v, a) (*(volatile unsigned short *)(a) = (v))
+
++static char *rev_s[CPU_3XX_MAX_REV] = {
++ "1.0",
++ "2.0",
++ "2.1",
++ "3.0",
++ "3.1",
++ "UNKNOWN",
++ "UNKNOWN",
++ "3.1.2"};
++
+ /*******************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+@@ -109,6 +126,7 @@
+ u32 get_mem_type(void)
+ {
+ u32 mem_type = get_sysboot_value();
++
+ switch (mem_type) {
+ case 0:
+ case 2:
+@@ -151,21 +169,158 @@
+ }
+
+ /******************************************
+- * get_cpu_rev(void) - extract version info
++ * get_cpu_type(void) - extract cpu info
+ ******************************************/
+-u32 get_cpu_rev(void)
++u32 get_cpu_type(void)
++{
++ return __raw_readl(CONTROL_OMAP_STATUS);
++}
++
++/******************************************
++ * get_cpu_id(void) - extract cpu id
++ * returns 0 for ES1.0, cpuid otherwise
++ ******************************************/
++u32 get_cpu_id(void)
+ {
+ u32 cpuid = 0;
+- /* On ES1.0 the IDCODE register is not exposed on L4
+- * so using CPU ID to differentiate
+- * between ES2.0 and ES1.0.
++
++ /*
++ * On ES1.0 the IDCODE register is not exposed on L4
++ * so using CPU ID to differentiate between ES1.0 and > ES1.0.
+ */
+- __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid));
+- if ((cpuid & 0xf) == 0x0)
+- return CPU_3430_ES1;
++ __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
++ if ((cpuid & 0xf) == 0x0) {
++ return 0;
++ } else {
++ /* Decode the IDs on > ES1.0 */
++ cpuid = __raw_readl(CONTROL_IDCODE);
++ }
++
++ return cpuid;
++}
++
++/******************************************
++ * get_cpu_family(void) - extract cpu info
++ ******************************************/
++u32 get_cpu_family(void)
++{
++ u16 hawkeye;
++ u32 cpu_family;
++ u32 cpuid = get_cpu_id();
++
++ if (cpuid == 0)
++ return CPU_OMAP34XX;
++
++ hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff;
++ switch (hawkeye) {
++ case HAWKEYE_OMAP34XX:
++ cpu_family = CPU_OMAP34XX;
++ break;
++ case HAWKEYE_AM35XX:
++ cpu_family = CPU_AM35XX;
++ break;
++ case HAWKEYE_OMAP36XX:
++ cpu_family = CPU_OMAP36XX;
++ break;
++ default:
++ cpu_family = CPU_OMAP34XX;
++ }
++
++ return cpu_family;
++}
++
++/******************************************
++ * get_cpu_rev(void) - extract version info
++ ******************************************/
++u32 get_cpu_rev(void)
++{
++ u32 cpuid = get_cpu_id();
++
++ if (cpuid == 0)
++ return CPU_3XX_ES10;
+ else
+- return CPU_3430_ES2;
++ return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf;
++}
++
++/******************************************
++ * Print CPU information
++ ******************************************/
++int print_cpuinfo (void)
++{
++ char *cpu_family_s, *cpu_s, *sec_s;
++
++ switch (get_cpu_family()) {
++ case CPU_OMAP34XX:
++ cpu_family_s = "OMAP";
++ switch (get_cpu_type()) {
++ case OMAP3503:
++ cpu_s = "3503";
++ break;
++ case OMAP3515:
++ cpu_s = "3515";
++ break;
++ case OMAP3525:
++ cpu_s = "3525";
++ break;
++ case OMAP3530:
++ cpu_s = "3530";
++ break;
++ default:
++ cpu_s = "35XX";
++ break;
++ }
++ break;
++ case CPU_AM35XX:
++ cpu_family_s = "AM";
++ switch (get_cpu_type()) {
++ case AM3505:
++ cpu_s = "3505";
++ break;
++ case AM3517:
++ cpu_s = "3517";
++ break;
++ default:
++ cpu_s = "35XX";
++ break;
++ }
++ break;
++ case CPU_OMAP36XX:
++ cpu_family_s = "OMAP";
++ switch (get_cpu_type()) {
++ case OMAP3730:
++ cpu_s = "3630/3730";
++ break;
++ default:
++ cpu_s = "36XX/37XX";
++ break;
++ }
++ break;
++ default:
++ cpu_family_s = "OMAP";
++ cpu_s = "35XX";
++ }
+
++ switch (get_device_type()) {
++ case TST_DEVICE:
++ sec_s = "TST";
++ break;
++ case EMU_DEVICE:
++ sec_s = "EMU";
++ break;
++ case HS_DEVICE:
++ sec_s = "HS";
++ break;
++ case GP_DEVICE:
++ sec_s = "GP";
++ break;
++ default:
++ sec_s = "?";
++ }
++
++ printf("%s%s-%s ES%s\n",
++ cpu_family_s, cpu_s, sec_s, rev_s[get_cpu_rev()]);
++
++ return 0;
+ }
+
+ /******************************************
+@@ -190,6 +345,47 @@
+ }
+
+ /*****************************************************************
++ * Routine: get_board_revision
++ * Description: Returns the board revision
++ *****************************************************************/
++int get_board_revision(void)
++{
++ int revision;
++ unsigned char data;
++
++ /* board revisions <= R2410 connect 4030 irq_1 to gpio112 */
++ /* these boards should return a revision number of 0 */
++ /* the code below forces a 4030 RTC irq to ensure that gpio112 is low */
++ data = 0x01;
++ i2c_write(0x4B, 0x29, 1, &data, 1);
++ data = 0x0c;
++ i2c_write(0x4B, 0x2b, 1, &data, 1);
++ i2c_read(0x4B, 0x2a, 1, &data, 1);
++
++ if (!omap_request_gpio(112) &&
++ !omap_request_gpio(113) &&
++ !omap_request_gpio(115)) {
++
++ omap_set_gpio_direction(112, 1);
++ omap_set_gpio_direction(113, 1);
++ omap_set_gpio_direction(115, 1);
++
++ revision = omap_get_gpio_datain(115) << 2 |
++ omap_get_gpio_datain(113) << 1 |
++ omap_get_gpio_datain(112);
++
++ omap_free_gpio(112);
++ omap_free_gpio(113);
++ omap_free_gpio(115);
++ } else {
++ printf("Error: unable to acquire board revision GPIOs\n");
++ revision = -1;
++ }
++
++ return revision;
++}
++
++/*****************************************************************
+ * sr32 - clear & set a value in a bit range for a 32 bit address
+ *****************************************************************/
+ void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value)
+@@ -225,55 +421,84 @@
+ *********************************************************************/
+ void config_3430sdram_ddr(void)
+ {
+- /* reset sdrc controller */
+- __raw_writel(SOFTRESET, SDRC_SYSCONFIG);
+- wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);
+- __raw_writel(0, SDRC_SYSCONFIG);
+-
+- /* setup sdrc to ball mux */
+- __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
+-
+- /* SDRC put in weak */
+-// (*(unsigned int*)0x6D00008C) = 0x00000020;
+-
+- /* SDRC_MCFG0 register */
+- (*(unsigned int*)0x6D000080) = 0x02584099;//from Micron
+-
+- /* SDRC_ACTIM_CTRLA0 register */
+-//our value (*(unsigned int*)0x6D00009c) = 0xa29db4c6;// for 166M
+- (*(unsigned int*)0x6D00009c) = 0xaa9db4c6;// for 166M from rkw
+-
+- /* SDRC_ACTIM_CTRLB0 register */
+-//from micron (*(unsigned int*)0x6D0000a0) = 0x12214;// for 166M
+-
+-// (*(unsigned int*)0x6D0000a0) = 0x00011417; our value
+- (*(unsigned int*)0x6D0000a0) = 0x00011517;
+-
+- /* SDRC_RFR_CTRL0 register */
+-//from micron (*(unsigned int*)0x6D0000a4) =0x54601; // for 166M
+-
+- (*(unsigned int*)0x6D0000a4) =0x0004DC01;
+-
+- /* Disble Power Down of CKE cuz of 1 CKE on combo part */
+- (*(unsigned int*)0x6D000070) = 0x00000081;
+-
+- /* SDRC_Manual command register */
+- (*(unsigned int*)0x6D0000a8) = 0x00000000; // NOP command
+- delay(5000);
+- (*(unsigned int*)0x6D0000a8) = 0x00000001; // Precharge command
+- (*(unsigned int*)0x6D0000a8) = 0x00000002; // Auto-refresh command
+- (*(unsigned int*)0x6D0000a8) = 0x00000002; // Auto-refresh command
+-
+- /* SDRC MR0 register */
+- (*(int*)0x6D000084) = 0x00000032; // Burst length =4
+- // CAS latency = 3
+- // Write Burst = Read Burst
+- // Serial Mode
+-
+- /* SDRC DLLA control register */
+- (*(unsigned int*)0x6D000060) = 0x0000A;
+- delay(0x20000); // some delay
++ /* reset sdrc controller */
++ __raw_writel(SOFTRESET, SDRC_SYSCONFIG);
++ wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);
++ __raw_writel(0, SDRC_SYSCONFIG);
++
++ /* setup sdrc to ball mux */
++ __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
++
++ switch (get_board_revision()) {
++ case 0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */
++ __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1);
++ __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0);
++ __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0);
++ __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1);
++ __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1);
++ break;
++ case 1: /* Micron 256MB/512MB, 1/2 banks of 256MB */
++ __raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_0);
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR_MICRON_XM, SDRC_MCFG_1);
++ __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0);
++ __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0);
++ __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1);
++ __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1);
++ break;
++ case 2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */
++ __raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR_HYNIX, SDRC_MCFG_0);
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR_HYNIX, SDRC_MCFG_1);
++ __raw_writel(HYNIX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0);
++ __raw_writel(HYNIX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0);
++ __raw_writel(HYNIX_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1);
++ __raw_writel(HYNIX_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1);
++ break;
++ default:
++ __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
++ __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1);
++ __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0);
++ __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0);
++ __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1);
++ __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0);
++ __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1);
++ }
++
++ __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER);
++
++ /* init sequence for mDDR/mSDR using manual commands (DDR is different) */
++ __raw_writel(CMD_NOP, SDRC_MANUAL_0);
++ __raw_writel(CMD_NOP, SDRC_MANUAL_1);
++
++ delay(5000);
++
++ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0);
++ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1);
+
++ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
++ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
++
++ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
++ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
++
++ /* set mr0 */
++ __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0);
++ __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1);
++
++ /* set up dll */
++ __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL);
++ delay(0x2000); /* give time to lock */
+ }
+ #endif /* CFG_3430SDRAM_DDR */
+
+@@ -283,12 +508,14 @@
+ *************************************************************/
+ u32 get_osc_clk_speed(void)
+ {
+- u32 start, cstart, cend, cdiff, val;
++ u32 start, cstart, cend, cdiff, cdiv, val;
+
+ val = __raw_readl(PRM_CLKSRC_CTRL);
+- /* If SYS_CLK is being divided by 2, remove for now */
+- val = (val & (~BIT7)) | BIT6;
+- __raw_writel(val, PRM_CLKSRC_CTRL);
++
++ if (val & SYSCLKDIV_2)
++ cdiv = 2;
++ else
++ cdiv = 1;
+
+ /* enable timer2 */
+ val = __raw_readl(CM_CLKSEL_WKUP) | BIT0;
+@@ -312,6 +539,7 @@
+ while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */
+ cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */
+ cdiff = cend - cstart; /* get elapsed ticks */
++ cdiff *= cdiv;
+
+ /* based on number of ticks assign speed */
+ if (cdiff > 19000)
+@@ -363,17 +591,19 @@
+ osc_clk = get_osc_clk_speed();
+ get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
+
+- sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */
++ sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */
+
+ /* If the input clock is greater than 19.2M always divide/2 */
+ if (sys_clkin_sel > 2) {
+- sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */
+- clk_index = sys_clkin_sel/2;
++ sr32(PRM_CLKSRC_CTRL, 6, 2, 2); /* input clock divider */
++ clk_index = sys_clkin_sel / 2;
+ } else {
+- sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */
++ sr32(PRM_CLKSRC_CTRL, 6, 2, 1); /* input clock divider */
+ clk_index = sys_clkin_sel;
+ }
+
++ sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */
++
+ /* The DPLL tables are defined according to sysclk value and
+ * silicon revision. The clk_index value will be used to get
+ * the values for that input sysclk from the DPLL param table
+@@ -386,31 +616,35 @@
+ sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS);
+ wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY);
+
+- /* Getting the base address of Core DPLL param table*/
+- dpll_param_p = (dpll_param *)get_core_dpll_param();
++ /* Getting the base address of Core DPLL param table */
++ dpll_param_p = (dpll_param *) get_core_dpll_param();
+ /* Moving it to the right sysclk and ES rev base */
+- dpll_param_p = dpll_param_p + 2*clk_index + sil_index;
++ dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+ /* CORE DPLL */
+ /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */
+ sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS);
+ wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY);
++
++ /* For 3430 ES1.0 Errata 1.50, default value directly doesnt
++ work. write another value and then default value. */
++ sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */
+ sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */
+ sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */
+ sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */
+ sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */
+- sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */
++ sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */
+ sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */
+ sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */
+ sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */
+ sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */
+- sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */
+- sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */
++ sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */
++ sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */
+ sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */
+- sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */
++ sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */
+ wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY);
+
+- /* Getting the base address to PER DPLL param table*/
+- dpll_param_p = (dpll_param *)get_per_dpll_param();
++ /* Getting the base address to PER DPLL param table */
++ dpll_param_p = (dpll_param *) get_per_dpll_param();
+ /* Moving it to the right sysclk base */
+ dpll_param_p = dpll_param_p + clk_index;
+ /* PER DPLL */
+@@ -420,29 +654,39 @@
+ sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */
+ sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */
+ sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */
+- sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */
+- sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */
+- sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */
+- sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */
++
++ if (get_cpu_family() == CPU_OMAP36XX) {
++ sr32(CM_CLKSEL3_PLL, 0, 5, CORE_DPLL_PARAM_M2); /* set M2 */
++ sr32(CM_CLKSEL2_PLL, 8, 11, CORE_DPLL_PARAM_M); /* set m */
++ sr32(CM_CLKSEL2_PLL, 0, 7, CORE_DPLL_PARAM_N); /* set n */
++ } else {
++ sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */
++ sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */
++ sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */
++ }
++
++ sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel); /* FREQSEL */
+ sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */
+ wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY);
+
+- /* Getting the base address to MPU DPLL param table*/
+- dpll_param_p = (dpll_param *)get_mpu_dpll_param();
++ /* Getting the base address to MPU DPLL param table */
++ dpll_param_p = (dpll_param *) get_mpu_dpll_param();
++
+ /* Moving it to the right sysclk and ES rev base */
+- dpll_param_p = dpll_param_p + 2*clk_index + sil_index;
++ dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
++
+ /* MPU DPLL (unlocked already) */
+ sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */
+ sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */
+ sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */
+ sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */
+- sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */
++ sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */
+ wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY);
+
+- /* Getting the base address to IVA DPLL param table*/
+- dpll_param_p = (dpll_param *)get_iva_dpll_param();
++ /* Getting the base address to IVA DPLL param table */
++ dpll_param_p = (dpll_param *) get_iva_dpll_param();
+ /* Moving it to the right sysclk and ES rev base */
+- dpll_param_p = dpll_param_p + 2*clk_index + sil_index;
++ dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
+ /* IVA DPLL (set to 12*20=240MHz) */
+ sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP);
+ wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY);
+@@ -536,20 +780,11 @@
+
+ /*******************************************************
+ * Routine: misc_init_r
+- * Description: Init ethernet (done here so udelay works)
+ ********************************************************/
+ int misc_init_r(void)
+ {
+-#ifdef CONFIG_MMC
+- /* REMOVE!! for proto boards only */
+- /* set vaux2 to 2.8V */
+- unsigned char byte = 0x20;
+- i2c_write(0x4B, 0x76, 1, &byte, 1);
+- byte = 0x09;
+- i2c_write(0x4B, 0x79, 1, &byte, 1);
+-
+- udelay(5000);
+-#endif
++ print_cpuinfo();
++ printf("Board revision: %d\n", get_board_revision());
+ return 0;
+ }
+
+@@ -616,6 +851,10 @@
+
+ #endif
+
++ /* Enable GPIO 4, 5, & 6 clocks */
++ sr32(CM_FCLKEN_PER, 17, 3, 0x7);
++ sr32(CM_ICLKEN_PER, 17, 3, 0x7);
++
+ #ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ /* Turn on all 3 I2C clocks */
+ sr32(CM_FCLKEN1_CORE, 15, 3, 0x7);
+@@ -638,10 +877,6 @@
+ sr32(CM_FCLKEN_PER, 0, 32, FCK_PER_ON);
+ sr32(CM_ICLKEN_PER, 0, 32, ICK_PER_ON);
+
+- /* Enable GPIO5 clocks for blinky LEDs */
+- sr32(CM_FCLKEN_PER, 16, 1, 0x1); /* FCKen GPIO5 */
+- sr32(CM_ICLKEN_PER, 16, 1, 0x1); /* ICKen GPIO5 */
+-
+ delay(1000);
+ }
+
+@@ -748,6 +983,11 @@
+ MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\
+ MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\
+ MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\
++ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) /*GPIO_112*/\
++ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) /*GPIO_113*/\
++ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\
++ /* - PEN_DOWN*/\
++ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) /*GPIO_115*/\
+ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\
+@@ -755,10 +995,12 @@
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\
+- MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\
+- MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\
+- MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\
+- MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\
++ MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | EN | M4)) /*GPIO_126*/\
++ MUX_VAL(CP(MMC1_DAT5), (IEN | PTD | EN | M4)) /*GPIO_127*/\
++ MUX_VAL(CP(MMC1_DAT6), (IEN | PTD | EN | M4)) /*GPIO_128*/\
++ MUX_VAL(CP(MMC1_DAT7), (IEN | PTD | EN | M4)) /*GPIO_129*/\
++ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
++ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\
+ MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\
+@@ -833,6 +1075,7 @@
+ __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0);
+ delay(1000);
+
++#ifdef CFG_NAND_K9F1G08R0A
+ if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)) {
+ __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0);
+ __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0);
+@@ -853,9 +1096,10 @@
+ #endif
+ return 1;
+ }
+-
+ }
++#endif
+
++#ifdef CFG_ONENAND
+ if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)) {
+ __raw_writel(ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0);
+ __raw_writel(ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0);
+@@ -877,6 +1121,8 @@
+ return 1;
+ }
+ }
++#endif
++
+ return 0;
+ }
+
+diff -uNr x-load-f243938.orig/common/cmd_load.c x-load-f243938/common/cmd_load.c
+--- x-load-f243938.orig/common/cmd_load.c 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/common/cmd_load.c 2012-06-07 15:20:05.921695819 -0300
+@@ -26,7 +26,7 @@
+ */
+ #include <common.h>
+
+-#define putc serial_putc
++#define putc
+ #define tstc serial_tstc
+
+ /*******************************************************
+diff -uNr x-load-f243938.orig/cpu/omap4/config.mk x-load-f243938/cpu/omap4/config.mk
+--- x-load-f243938.orig/cpu/omap4/config.mk 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/cpu/omap4/config.mk 2012-06-07 14:45:39.449648667 -0300
+@@ -0,0 +1,32 @@
++#
++# (C) Copyright 2002
++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# version 2 as published by the Free Software Foundation.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
++ -msoft-float
++
++PLATFORM_CPPFLAGS += -march=armv7-a
++# =========================================================================
++#
++# Supply options according to compiler version
++#
++# =========================================================================
++PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
++PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
+diff -uNr x-load-f243938.orig/cpu/omap4/cpu.c x-load-f243938/cpu/omap4/cpu.c
+--- x-load-f243938.orig/cpu/omap4/cpu.c 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/cpu/omap4/cpu.c 2012-06-07 14:45:39.449648667 -0300
+@@ -0,0 +1,79 @@
++/*
++ * (C) Copyright 2004-2009 Texas Insturments
++ *
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Marius Groeger <mgroeger@sysgo.de>
++ *
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * CPU specific code
++ */
++
++#include <common.h>
++#include <asm/io.h>
++
++/* See also ARM Ref. Man. */
++#define C1_MMU (1<<0) /* mmu off/on */
++#define C1_ALIGN (1<<1) /* alignment faults off/on */
++#define C1_DC (1<<2) /* dcache off/on */
++#define C1_WB (1<<3) /* merging write buffer on/off */
++#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
++#define C1_SYS_PROT (1<<8) /* system protection */
++#define C1_ROM_PROT (1<<9) /* ROM protection */
++#define C1_IC (1<<12) /* icache off/on */
++#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
++#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
++
++int cpu_init (void)
++{
++ return 0;
++}
++
++unsigned int cortex_a9_rev(void)
++{
++
++ unsigned int i;
++
++ /* turn off I/D-cache */
++ asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (i));
++
++ return i;
++}
++
++unsigned int omap_revision(void)
++{
++ unsigned int rev = cortex_a9_rev();
++
++ switch(rev) {
++ case 0x410FC091:
++ return OMAP4430_ES1_0;
++ case 0x411FC092:
++ if (__raw_readl(0x4a002204) == 0x3b95c02f)
++ return OMAP4430_ES2_1;
++ else
++ return OMAP4430_ES2_0;
++ default:
++ return OMAP4430_SILICON_ID_INVALID;
++ }
++}
+diff -uNr x-load-f243938.orig/cpu/omap4/Makefile x-load-f243938/cpu/omap4/Makefile
+--- x-load-f243938.orig/cpu/omap4/Makefile 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/cpu/omap4/Makefile 2012-06-07 14:45:39.449648667 -0300
+@@ -0,0 +1,44 @@
++#
++# (C) Copyright 2009
++# Texas Instruments, <www.ti.com>
++# (C) Copyright 2000-2003
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# version 2 as published by the Free Software Foundation.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = lib$(CPU).a
++
++START = start.o
++OBJS = cpu.o mmc.o sys_info.o
++
++all: .depend $(START) $(LIB)
++
++$(LIB): $(OBJS)
++ $(AR) crv $@ $(OBJS)
++
++#########################################################################
++
++.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
++ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
++
++sinclude .depend
++
++#########################################################################
+diff -uNr x-load-f243938.orig/cpu/omap4/mmc.c x-load-f243938/cpu/omap4/mmc.c
+--- x-load-f243938.orig/cpu/omap4/mmc.c 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/cpu/omap4/mmc.c 2012-06-07 14:45:39.449648667 -0300
+@@ -0,0 +1,547 @@
++/*
++ * (C) Copyright 2008
++ * Texas Instruments, <www.ti.com>
++ * Syed Mohammed Khasim <khasim@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation's version 2 of
++ * the License.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <config.h>
++#include <common.h>
++#include <part.h>
++#include <fat.h>
++#include <mmc.h>
++#include <i2c.h>
++
++const unsigned short mmc_transspeed_val[15][4] = {
++ {CLKD(10, 1), CLKD(10, 10), CLKD(10, 100), CLKD(10, 1000)},
++ {CLKD(12, 1), CLKD(12, 10), CLKD(12, 100), CLKD(12, 1000)},
++ {CLKD(13, 1), CLKD(13, 10), CLKD(13, 100), CLKD(13, 1000)},
++ {CLKD(15, 1), CLKD(15, 10), CLKD(15, 100), CLKD(15, 1000)},
++ {CLKD(20, 1), CLKD(20, 10), CLKD(20, 100), CLKD(20, 1000)},
++ {CLKD(26, 1), CLKD(26, 10), CLKD(26, 100), CLKD(26, 1000)},
++ {CLKD(30, 1), CLKD(30, 10), CLKD(30, 100), CLKD(30, 1000)},
++ {CLKD(35, 1), CLKD(35, 10), CLKD(35, 100), CLKD(35, 1000)},
++ {CLKD(40, 1), CLKD(40, 10), CLKD(40, 100), CLKD(40, 1000)},
++ {CLKD(45, 1), CLKD(45, 10), CLKD(45, 100), CLKD(45, 1000)},
++ {CLKD(52, 1), CLKD(52, 10), CLKD(52, 100), CLKD(52, 1000)},
++ {CLKD(55, 1), CLKD(55, 10), CLKD(55, 100), CLKD(55, 1000)},
++ {CLKD(60, 1), CLKD(60, 10), CLKD(60, 100), CLKD(60, 1000)},
++ {CLKD(70, 1), CLKD(70, 10), CLKD(70, 100), CLKD(70, 1000)},
++ {CLKD(80, 1), CLKD(80, 10), CLKD(80, 100), CLKD(80, 1000)}
++};
++
++mmc_card_data cur_card_data;
++static block_dev_desc_t mmc_blk_dev;
++
++block_dev_desc_t *mmc_get_dev(int dev)
++{
++ return ((block_dev_desc_t *) &mmc_blk_dev);
++}
++
++unsigned char mmc_board_init(void)
++{
++ unsigned int value = 0;
++
++ return 1;
++}
++
++void mmc_init_stream(void)
++{
++ volatile unsigned int mmc_stat;
++
++ OMAP_HSMMC_CON |= INIT_INITSTREAM;
++
++ OMAP_HSMMC_CMD = MMC_CMD0;
++ do {
++ mmc_stat = OMAP_HSMMC_STAT;
++ } while (!(mmc_stat & CC_MASK));
++
++ OMAP_HSMMC_STAT = CC_MASK;
++
++ OMAP_HSMMC_CMD = MMC_CMD0;
++ do {
++ mmc_stat = OMAP_HSMMC_STAT;
++ } while (!(mmc_stat & CC_MASK));
++
++ OMAP_HSMMC_STAT = OMAP_HSMMC_STAT;
++ OMAP_HSMMC_CON &= ~INIT_INITSTREAM;
++}
++
++unsigned char mmc_clock_config(unsigned int iclk, unsigned short clk_div)
++{
++ unsigned int val;
++
++ mmc_reg_out(OMAP_HSMMC_SYSCTL, (ICE_MASK | DTO_MASK | CEN_MASK),
++ (ICE_STOP | DTO_15THDTO | CEN_DISABLE));
++
++ switch (iclk) {
++ case CLK_INITSEQ:
++ val = MMC_INIT_SEQ_CLK / 2;
++ break;
++ case CLK_400KHZ:
++ val = MMC_400kHz_CLK;
++ break;
++ case CLK_MISC:
++ val = clk_div;
++ break;
++ default:
++ return 0;
++ }
++ mmc_reg_out(OMAP_HSMMC_SYSCTL,
++ ICE_MASK | CLKD_MASK, (val << CLKD_OFFSET) | ICE_OSCILLATE);
++
++ while ((OMAP_HSMMC_SYSCTL & ICS_MASK) == ICS_NOTREADY) {
++ }
++
++ OMAP_HSMMC_SYSCTL |= CEN_ENABLE;
++ return 1;
++}
++
++unsigned char mmc_init_setup(void)
++{
++ unsigned int reg_val;
++
++ mmc_board_init();
++
++ OMAP_HSMMC_SYSCONFIG |= MMC_SOFTRESET;
++ while ((OMAP_HSMMC_SYSSTATUS & RESETDONE) == 0) ;
++
++ OMAP_HSMMC_SYSCTL |= SOFTRESETALL;
++ while ((OMAP_HSMMC_SYSCTL & SOFTRESETALL) != 0x0) ;
++
++ OMAP_HSMMC_HCTL = DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0;
++ OMAP_HSMMC_CAPA |= VS30_3V0SUP | VS18_1V8SUP;
++
++ reg_val = OMAP_HSMMC_CON & RESERVED_MASK;
++
++ OMAP_HSMMC_CON = CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH |
++ CDP_ACTIVEHIGH | MIT_CTO | DW8_1_4BITMODE | MODE_FUNC |
++ STR_BLOCK | HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN;
++
++ mmc_clock_config(CLK_INITSEQ, 0);
++ OMAP_HSMMC_HCTL |= SDBP_PWRON;
++
++ OMAP_HSMMC_IE = 0x307f0033;
++
++ mmc_init_stream();
++ return 1;
++}
++
++unsigned char mmc_send_cmd(unsigned int cmd, unsigned int arg,
++ unsigned int *response)
++{
++ volatile unsigned int mmc_stat;
++
++ while ((OMAP_HSMMC_PSTATE & DATI_MASK) == DATI_CMDDIS) {
++ }
++
++ OMAP_HSMMC_BLK = BLEN_512BYTESLEN | NBLK_STPCNT;
++ OMAP_HSMMC_STAT = 0xFFFFFFFF;
++ OMAP_HSMMC_ARG = arg;
++ OMAP_HSMMC_CMD = cmd | CMD_TYPE_NORMAL | CICE_NOCHECK |
++ CCCE_NOCHECK | MSBS_SGLEBLK | ACEN_DISABLE | BCE_DISABLE |
++ DE_DISABLE;
++
++ while (1) {
++ do {
++ mmc_stat = OMAP_HSMMC_STAT;
++ } while (mmc_stat == 0);
++
++ if ((mmc_stat & ERRI_MASK) != 0)
++ return (unsigned char) mmc_stat;
++
++ if (mmc_stat & CC_MASK) {
++ OMAP_HSMMC_STAT = CC_MASK;
++ response[0] = OMAP_HSMMC_RSP10;
++ if ((cmd & RSP_TYPE_MASK) == RSP_TYPE_LGHT136) {
++ response[1] = OMAP_HSMMC_RSP32;
++ response[2] = OMAP_HSMMC_RSP54;
++ response[3] = OMAP_HSMMC_RSP76;
++ }
++ break;
++ }
++ }
++ return 1;
++}
++
++unsigned char mmc_read_data(unsigned int *output_buf)
++{
++ volatile unsigned int mmc_stat;
++ unsigned int read_count = 0;
++
++ /*
++ * Start Polled Read
++ */
++ while (1) {
++ do {
++ mmc_stat = OMAP_HSMMC_STAT;
++ } while (mmc_stat == 0);
++
++ if ((mmc_stat & ERRI_MASK) != 0)
++ return (unsigned char) mmc_stat;
++
++ if (mmc_stat & BRR_MASK) {
++ unsigned int k;
++
++ OMAP_HSMMC_STAT |= BRR_MASK;
++ for (k = 0; k < MMCSD_SECTOR_SIZE / 4; k++) {
++ *output_buf = OMAP_HSMMC_DATA;
++ output_buf++;
++ read_count += 4;
++ }
++ }
++
++ if (mmc_stat & BWR_MASK)
++ OMAP_HSMMC_STAT |= BWR_MASK;
++
++ if (mmc_stat & TC_MASK) {
++ OMAP_HSMMC_STAT |= TC_MASK;
++ break;
++ }
++ }
++ return 1;
++}
++
++unsigned char mmc_detect_card(mmc_card_data *mmc_card_cur)
++{
++ unsigned char err;
++ unsigned int argument = 0;
++ unsigned int ocr_value, ocr_recvd, ret_cmd41, hcs_val;
++ unsigned int resp[4];
++ unsigned short retry_cnt = 2000;
++
++ /* Set to Initialization Clock */
++ err = mmc_clock_config(CLK_400KHZ, 0);
++ if (err != 1)
++ return err;
++
++ mmc_card_cur->RCA = MMC_RELATIVE_CARD_ADDRESS;
++ argument = 0x00000000;
++
++ ocr_value = (0x1FF << 15);
++ err = mmc_send_cmd(MMC_CMD0, argument, resp);
++ if (err != 1)
++ return err;
++
++ argument = SD_CMD8_CHECK_PATTERN | SD_CMD8_2_7_3_6_V_RANGE;
++ err = mmc_send_cmd(MMC_SDCMD8, argument, resp);
++ hcs_val = (err == 1) ?
++ MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR :
++ MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE;
++
++ argument = 0x0000 << 16;
++ err = mmc_send_cmd(MMC_CMD55, argument, resp);
++ if (err == 1) {
++ mmc_card_cur->card_type = SD_CARD;
++ ocr_value |= hcs_val;
++ ret_cmd41 = MMC_ACMD41;
++ } else {
++ mmc_card_cur->card_type = MMC_CARD;
++ ocr_value |= MMC_OCR_REG_ACCESS_MODE_SECTOR;
++ ret_cmd41 = MMC_CMD1;
++ OMAP_HSMMC_CON &= ~OD;
++ OMAP_HSMMC_CON |= OPENDRAIN;
++ }
++
++ argument = ocr_value;
++ err = mmc_send_cmd(ret_cmd41, argument, resp);
++ if (err != 1)
++ return err;
++
++ ocr_recvd = ((mmc_resp_r3 *) resp)->ocr;
++
++ while (!(ocr_recvd & (0x1 << 31)) && (retry_cnt > 0)) {
++ retry_cnt--;
++ if (mmc_card_cur->card_type == SD_CARD) {
++ argument = 0x0000 << 16;
++ err = mmc_send_cmd(MMC_CMD55, argument, resp);
++ }
++
++ argument = ocr_value;
++ err = mmc_send_cmd(ret_cmd41, argument, resp);
++ if (err != 1)
++ return err;
++ ocr_recvd = ((mmc_resp_r3 *) resp)->ocr;
++ }
++
++ if (!(ocr_recvd & (0x1 << 31)))
++ return 0;
++
++ if (mmc_card_cur->card_type == MMC_CARD) {
++ if ((ocr_recvd & MMC_OCR_REG_ACCESS_MODE_MASK) ==
++ MMC_OCR_REG_ACCESS_MODE_SECTOR) {
++ mmc_card_cur->mode = SECTOR_MODE;
++ } else {
++ mmc_card_cur->mode = BYTE_MODE;
++ }
++
++ ocr_recvd &= ~MMC_OCR_REG_ACCESS_MODE_MASK;
++ } else {
++ if ((ocr_recvd & MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK)
++ == MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR) {
++ mmc_card_cur->mode = SECTOR_MODE;
++ } else {
++ mmc_card_cur->mode = BYTE_MODE;
++ }
++ ocr_recvd &= ~MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK;
++ }
++
++ ocr_recvd &= ~(0x1 << 31);
++ if (!(ocr_recvd & ocr_value))
++ return 0;
++
++ err = mmc_send_cmd(MMC_CMD2, argument, resp);
++ if (err != 1)
++ return err;
++
++ if (mmc_card_cur->card_type == MMC_CARD) {
++ argument = mmc_card_cur->RCA << 16;
++ err = mmc_send_cmd(MMC_CMD3, argument, resp);
++ if (err != 1)
++ return err;
++ } else {
++ argument = 0x00000000;
++ err = mmc_send_cmd(MMC_SDCMD3, argument, resp);
++ if (err != 1)
++ return err;
++
++ mmc_card_cur->RCA = ((mmc_resp_r6 *) resp)->newpublishedrca;
++ }
++
++ OMAP_HSMMC_CON &= ~OD;
++ OMAP_HSMMC_CON |= NOOPENDRAIN;
++ return 1;
++}
++
++unsigned char mmc_read_cardsize(mmc_card_data *mmc_dev_data,
++ mmc_csd_reg_t *cur_csd)
++{
++ mmc_extended_csd_reg_t ext_csd;
++ unsigned int size, count, blk_len, blk_no, card_size, argument;
++ unsigned char err;
++ unsigned int resp[4];
++
++ if (mmc_dev_data->mode == SECTOR_MODE) {
++ if (mmc_dev_data->card_type == SD_CARD) {
++ card_size =
++ (((mmc_sd2_csd_reg_t *) cur_csd)->
++ c_size_lsb & MMC_SD2_CSD_C_SIZE_LSB_MASK) |
++ ((((mmc_sd2_csd_reg_t *) cur_csd)->
++ c_size_msb & MMC_SD2_CSD_C_SIZE_MSB_MASK)
++ << MMC_SD2_CSD_C_SIZE_MSB_OFFSET);
++ mmc_dev_data->size = card_size * 1024;
++ if (mmc_dev_data->size == 0)
++ return 0;
++ } else {
++ argument = 0x00000000;
++ err = mmc_send_cmd(MMC_CMD8, argument, resp);
++ if (err != 1)
++ return err;
++ err = mmc_read_data((unsigned int *) &ext_csd);
++ if (err != 1)
++ return err;
++ mmc_dev_data->size = ext_csd.sectorcount;
++
++ if (mmc_dev_data->size == 0)
++ mmc_dev_data->size = 8388608;
++ }
++ } else {
++ if (cur_csd->c_size_mult >= 8)
++ return 0;
++
++ if (cur_csd->read_bl_len >= 12)
++ return 0;
++
++ /* Compute size */
++ count = 1 << (cur_csd->c_size_mult + 2);
++ card_size = (cur_csd->c_size_lsb & MMC_CSD_C_SIZE_LSB_MASK) |
++ ((cur_csd->c_size_msb & MMC_CSD_C_SIZE_MSB_MASK)
++ << MMC_CSD_C_SIZE_MSB_OFFSET);
++ blk_no = (card_size + 1) * count;
++ blk_len = 1 << cur_csd->read_bl_len;
++ size = blk_no * blk_len;
++ mmc_dev_data->size = size / MMCSD_SECTOR_SIZE;
++ if (mmc_dev_data->size == 0)
++ return 0;
++ }
++ return 1;
++}
++
++unsigned char omap_mmc_read_sect(unsigned int start_sec, unsigned int num_bytes,
++ mmc_card_data *mmc_c,
++ unsigned long *output_buf)
++{
++ unsigned char err;
++ unsigned int argument;
++ unsigned int resp[4];
++ unsigned int num_sec_val =
++ (num_bytes + (MMCSD_SECTOR_SIZE - 1)) / MMCSD_SECTOR_SIZE;
++ unsigned int sec_inc_val;
++
++ if (num_sec_val == 0)
++ return 1;
++
++ if (mmc_c->mode == SECTOR_MODE) {
++ argument = start_sec;
++ sec_inc_val = 1;
++ } else {
++ argument = start_sec * MMCSD_SECTOR_SIZE;
++ sec_inc_val = MMCSD_SECTOR_SIZE;
++ }
++
++ while (num_sec_val) {
++ err = mmc_send_cmd(MMC_CMD17, argument, resp);
++ if (err != 1)
++ return err;
++
++ err = mmc_read_data((unsigned int *) output_buf);
++ if (err != 1)
++ return err;
++
++ output_buf += (MMCSD_SECTOR_SIZE / 4);
++ argument += sec_inc_val;
++ num_sec_val--;
++ }
++ return 1;
++}
++
++unsigned char configure_mmc(mmc_card_data *mmc_card_cur)
++{
++ unsigned char ret_val;
++ unsigned int argument;
++ unsigned int resp[4];
++ unsigned int trans_clk, trans_fact, trans_unit, retries = 2;
++ mmc_csd_reg_t Card_CSD;
++ unsigned char trans_speed;
++
++ ret_val = mmc_init_setup();
++
++ if (ret_val != 1)
++ return ret_val;
++
++ do {
++ ret_val = mmc_detect_card(mmc_card_cur);
++ retries--;
++ } while ((retries > 0) && (ret_val != 1));
++
++ argument = mmc_card_cur->RCA << 16;
++ ret_val = mmc_send_cmd(MMC_CMD9, argument, resp);
++ if (ret_val != 1)
++ return ret_val;
++
++ ((unsigned int *) &Card_CSD)[3] = resp[3];
++ ((unsigned int *) &Card_CSD)[2] = resp[2];
++ ((unsigned int *) &Card_CSD)[1] = resp[1];
++ ((unsigned int *) &Card_CSD)[0] = resp[0];
++
++ if (mmc_card_cur->card_type == MMC_CARD)
++ mmc_card_cur->version = Card_CSD.spec_vers;
++
++ trans_speed = Card_CSD.tran_speed;
++
++ ret_val = mmc_send_cmd(MMC_CMD4, MMC_DSR_DEFAULT << 16, resp);
++ if (ret_val != 1)
++ return ret_val;
++
++ trans_unit = trans_speed & MMC_CSD_TRAN_SPEED_UNIT_MASK;
++ trans_fact = trans_speed & MMC_CSD_TRAN_SPEED_FACTOR_MASK;
++
++ if (trans_unit > MMC_CSD_TRAN_SPEED_UNIT_100MHZ)
++ return 0;
++
++ if ((trans_fact < MMC_CSD_TRAN_SPEED_FACTOR_1_0) ||
++ (trans_fact > MMC_CSD_TRAN_SPEED_FACTOR_8_0))
++ return 0;
++
++ trans_unit >>= 0;
++ trans_fact >>= 3;
++
++ trans_clk = mmc_transspeed_val[trans_fact - 1][trans_unit] * 2;
++ ret_val = mmc_clock_config(CLK_MISC, trans_clk);
++
++ if (ret_val != 1)
++ return ret_val;
++
++ argument = mmc_card_cur->RCA << 16;
++ ret_val = mmc_send_cmd(MMC_CMD7_SELECT, argument, resp);
++ if (ret_val != 1)
++ return ret_val;
++
++ /* Configure the block length to 512 bytes */
++ argument = MMCSD_SECTOR_SIZE;
++ ret_val = mmc_send_cmd(MMC_CMD16, argument, resp);
++ if (ret_val != 1)
++ return ret_val;
++
++ /* get the card size in sectors */
++ ret_val = mmc_read_cardsize(mmc_card_cur, &Card_CSD);
++ if (ret_val != 1)
++ return ret_val;
++
++ return 1;
++}
++unsigned long mmc_bread(int dev_num, unsigned long blknr, lbaint_t blkcnt,
++ void *dst)
++{
++ omap_mmc_read_sect(blknr, (blkcnt * MMCSD_SECTOR_SIZE), &cur_card_data,
++ (unsigned long *) dst);
++ return 1;
++}
++
++int mmc_init(int verbose)
++{
++ unsigned char ret;
++
++ ret = configure_mmc(&cur_card_data);
++
++ if (ret == 1) {
++ mmc_blk_dev.if_type = IF_TYPE_MMC;
++ mmc_blk_dev.part_type = PART_TYPE_DOS;
++ mmc_blk_dev.dev = 0;
++ mmc_blk_dev.lun = 0;
++ mmc_blk_dev.type = 0;
++
++ /* FIXME fill in the correct size (is set to 32MByte) */
++ mmc_blk_dev.blksz = MMCSD_SECTOR_SIZE;
++ mmc_blk_dev.lba = 0x10000;
++ mmc_blk_dev.removable = 0;
++ mmc_blk_dev.block_read = mmc_bread;
++
++ fat_register_device(&mmc_blk_dev, 1);
++ return 1;
++ }
++ else
++ return 0;
++}
++
++int mmc_read(ulong src, uchar *dst, int size)
++{
++ return 0;
++}
++
++int mmc_write(uchar *src, ulong dst, int size)
++{
++ return 0;
++}
++
++int mmc2info(ulong addr)
++{
++ return 0;
++}
+diff -uNr x-load-f243938.orig/cpu/omap4/start.S x-load-f243938/cpu/omap4/start.S
+--- x-load-f243938.orig/cpu/omap4/start.S 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/cpu/omap4/start.S 2012-06-07 14:45:39.449648667 -0300
+@@ -0,0 +1,220 @@
++/*
++ * armboot - Startup Code for OMAP4430/ARM Cortex CPU-core
++ *
++ * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com>
++ *
++ * Copyright (c) 2001 Marius Groger <mag@sysgo.de>
++ * Copyright (c) 2002 Alex Zupke <azu@sysgo.de>
++ * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
++ * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
++ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
++ * Copyright (c) 2006 Syed Mohammed Khasim <x0khasim@ti.com>
++ * Copyright (c) 2009 Texas Instruments
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <config.h>
++#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
++#include <asm/arch/cpu.h>
++#endif
++#define CONFIG_SKIP_RELOCATE_XLOADER
++.globl _start
++_start:
++ b reset
++ ldr pc, _hang
++ ldr pc, _hang
++ ldr pc, _hang
++ ldr pc, _hang
++ ldr pc, _hang
++ ldr pc, _hang
++ ldr pc, _hang
++
++_hang:
++ .word do_hang
++
++ .word 0x12345678
++ .word 0x12345678
++ .word 0x12345678
++ .word 0x12345678
++ .word 0x12345678
++ .word 0x12345678
++ .word 0x12345678 /* now 16*4=64 */
++
++.global _end_vect
++_end_vect:
++
++ .balignl 16,0xdeadbeef
++/*
++ *************************************************************************
++ *
++ * Startup Code (reset vector)
++ *
++ * do important init only if we don't start from memory!
++ * setup Memory and board specific bits prior to relocation.
++ * relocate armboot to ram
++ * setup stack
++ *
++ *************************************************************************
++ */
++
++_TEXT_BASE:
++ .word TEXT_BASE
++
++.globl _armboot_start
++_armboot_start:
++ .word _start
++
++/*
++ * These are defined in the board-specific linker script.
++ */
++.globl _bss_start
++_bss_start:
++ .word __bss_start
++
++.globl _bss_end
++_bss_end:
++ .word _end
++
++/*
++ * the actual reset code
++ */
++
++reset:
++ /* Use a temp scratch pad memory
++ * to store the boot reason
++ */
++ ldr r4, scratchpad
++ ldr r5, [r0, #0x8] /* r5 <- value of boot device */
++ str r5, [r4] /* store r5 in scratchpad reg */
++
++ /*
++ * set the cpu to SVC32 mode
++ */
++ mrs r0,cpsr
++ bic r0,r0,#0x1f
++ orr r0,r0,#0xd3
++ msr cpsr,r0
++
++ /* Copy vectors to mask ROM indirect addr */
++ adr r0, _start /* r0 <- current position of code */
++ add r0, r0, #4 /* skip reset vector */
++ mov r2, #64 /* r2 <- size to copy */
++ add r2, r0, r2 /* r2 <- source end address */
++ mov r1, #SRAM_OFFSET0 /* build vect addr */
++ mov r3, #SRAM_OFFSET1
++ add r1, r1, r3
++ mov r3, #SRAM_OFFSET2
++ add r1, r1, r3
++next:
++ ldmia r0!, {r3-r10} /* copy from source address [r0] */
++ stmia r1!, {r3-r10} /* copy to target address [r1] */
++ cmp r0, r2 /* until source end address [r2] */
++ bne next /* loop until equal */
++ /* the mask ROM code should have PLL and others stable */
++ bl cpu_init_crit
++
++#ifndef CONFIG_SKIP_RELOCATE_XLOADER
++relocate: /* relocate U-Boot to RAM */
++ adr r0, _start /* r0 <- current position of code */
++ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
++ cmp r0, r1 /* don't reloc during debug */
++ beq stack_setup
++
++ ldr r2, _armboot_start
++ ldr r3, _bss_start
++ sub r2, r3, r2 /* r2 <- size of armboot */
++ add r2, r0, r2 /* r2 <- source end address */
++
++copy_loop: /* copy 32 bytes at a time */
++ ldmia r0!, {r3-r10} /* copy from source address [r0] */
++ stmia r1!, {r3-r10} /* copy to target address [r1] */
++ cmp r0, r2 /* until source end addreee [r2] */
++ ble copy_loop
++#endif
++
++ /* Set up the stack */
++stack_setup:
++ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
++ and sp, sp, #~7 /* 8 byte alinged for (ldr/str)d */
++
++ /* Clear BSS (if any). Is below tx (watch load addr - need space) */
++clear_bss:
++ ldr r0, _bss_start /* find start of bss segment */
++ ldr r1, _bss_end /* stop here */
++ mov r2, #0x00000000 /* clear value */
++clbss_l:
++ str r2, [r0] /* clear BSS location */
++ cmp r0, r1 /* are we at the end yet */
++ add r0, r0, #4 /* increment clear index pointer */
++ bne clbss_l /* keep clearing till at end */
++
++ ldr pc, _start_armboot /* jump to C code */
++
++_start_armboot: .word start_armboot
++
++
++/*
++ *************************************************************************
++ *
++ * CPU_init_critical registers
++ *
++ * setup important registers
++ * setup memory timing
++ *
++ *************************************************************************
++ */
++cpu_init_crit:
++ /*
++ * Invalidate L1 I/D
++ */
++ mov r0, #0 /* set up for MCR */
++ mcr p15, 0, r0, c8, c7, 0 /* invalidate TLBs */
++ mcr p15, 0, r0, c7, c5, 0 /* invalidate icache */
++
++ /*
++ * disable MMU stuff and caches
++ */
++ mrc p15, 0, r0, c1, c0, 0
++ bic r0, r0, #0x00002000 @ clear bits 13 (--V-)
++ bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM)
++ orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align
++ orr r0, r0, #0x00000800 @ set bit 12 (Z---) BTB
++ mcr p15, 0, r0, c1, c0, 0
++
++ /*
++ * Jump to board specific initialization... The Mask ROM will
++ * have already initialized basic memory. Go here to bump up
++ * clock rate and handle wake up conditions.
++ */
++ mov ip, lr /* persevere link reg across call */
++ bl lowlevel_init /* go setup pll,mux,memory */
++ mov lr, ip /* restore link */
++ mov pc, lr /* back to my caller */
++
++
++/*
++ * exception handler
++ */
++ .align 5
++do_hang:
++ ldr sp, _TEXT_BASE /* use 32 words abort stack */
++ bl hang /* hang and never return */
++
++scratchpad:
++ .word 0x4A326000
+diff -uNr x-load-f243938.orig/cpu/omap4/sys_info.c x-load-f243938/cpu/omap4/sys_info.c
+--- x-load-f243938.orig/cpu/omap4/sys_info.c 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/cpu/omap4/sys_info.c 2012-06-07 14:45:39.449648667 -0300
+@@ -0,0 +1,35 @@
++/*
++ * (C) Copyright 2004-2009
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/sys_info.h>
++
++
++/******************************************
++ * get_cpu_rev(void) - extract version info
++ ******************************************/
++u32 get_cpu_rev(void)
++{
++ return CPU_4430_ES1;
++
++}
++
++
+diff -uNr x-load-f243938.orig/drivers/k9f1g08r0a.c x-load-f243938/drivers/k9f1g08r0a.c
+--- x-load-f243938.orig/drivers/k9f1g08r0a.c 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/drivers/k9f1g08r0a.c 2012-06-07 14:45:39.453648667 -0300
+@@ -42,6 +42,7 @@
+ */
+ #define MT29F1G_MFR 0x2c /* Micron */
+ #define MT29F1G_MFR2 0x20 /* numonyx */
++#define MT29F1G_MFR3 0xad /* Hynix */
+ #define MT29F1G_ID 0xa1 /* x8, 1GiB */
+ #define MT29F2G_ID 0xba /* x16, 2GiB */
+ #define MT29F4G_ID 0xbc /* x16, 4GiB */
+@@ -206,13 +207,18 @@
+
+ NAND_DISABLE_CE();
+
+- if (((mfr == MT29F1G_MFR || mfr == MT29F1G_MFR2) &&
++ if (((mfr == MT29F1G_MFR || mfr == MT29F1G_MFR2 || mfr == MT29F1G_MFR3) &&
+ (id == MT29F1G_ID || id == MT29F2G_ID || id == MT29F4G_ID)) ||
+ (mfr == K9F1G08R0A_MFR && (id == K9F1G08R0A_ID))) {
+ return 0;
+ } else {
+- printf("Unknown chip: mfr was 0x%02x, id was 0x%02x\n", mfr, id);
+- return 1;
++ if ((mfr == 0) && (id == 0)) {
++ printf("No NAND detected\n");
++ return 0;
++ } else {
++ printf("Unknown chip: mfr was 0x%02x, id was 0x%02x\n", mfr, id);
++ return 1;
++ }
+ }
+ }
+
+diff -uNr x-load-f243938.orig/drivers/Makefile x-load-f243938/drivers/Makefile
+--- x-load-f243938.orig/drivers/Makefile 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/drivers/Makefile 2012-06-07 14:45:39.449648667 -0300
+@@ -26,7 +26,7 @@
+ # CFLAGS += -DET_DEBUG -DDEBUG
+
+ LIB = libdrivers.a
+-OBJS = serial.o ns16550.o onenand.o omap24xx_i2c.o
++OBJS = serial.o ns16550.o omap24xx_i2c.o
+
+ ifeq ($(BOARD), omap3430sdp)
+ OBJS += k9f1g08r0a.o
+@@ -41,7 +41,7 @@
+ endif
+
+ ifeq ($(BOARD), omap3evm)
+-OBJS += k9f1g08r0a.o
++OBJS += k9f1g08r0a.o onenand.o
+ endif
+
+ ifeq ($(BOARD), overo)
+diff -uNr x-load-f243938.orig/fs/fat/fat.c x-load-f243938/fs/fat/fat.c
+--- x-load-f243938.orig/fs/fat/fat.c 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/fs/fat/fat.c 2012-06-07 14:45:39.453648667 -0300
+@@ -384,7 +384,7 @@
+ newclust = get_fatent(mydata, endclust);
+ if((newclust -1)!=endclust)
+ goto getit;
+- if (newclust <= 0x0001 || newclust >= 0xfff0) {
++ if (newclust <= 0x0001 || newclust >= 0xfffff0) {
+ FAT_DPRINT("curclust: 0x%x\n", newclust);
+ FAT_DPRINT("Invalid FAT entry\n");
+ return gotsize;
+@@ -419,7 +419,7 @@
+ filesize -= actsize;
+ buffer += actsize;
+ curclust = get_fatent(mydata, endclust);
+- if (curclust <= 0x0001 || curclust >= 0xfff0) {
++ if (curclust <= 0x0001 || curclust >= 0xfffff0) {
+ FAT_DPRINT("curclust: 0x%x\n", curclust);
+ FAT_ERROR("Invalid FAT entry\n");
+ return gotsize;
+@@ -580,7 +580,7 @@
+ return retdent;
+ }
+ curclust = get_fatent (mydata, curclust);
+- if (curclust <= 0x0001 || curclust >= 0xfff0) {
++ if (curclust <= 0x0001 || curclust >= 0xfffff0) {
+ FAT_DPRINT ("curclust: 0x%x\n", curclust);
+ FAT_ERROR ("Invalid FAT entry\n");
+ return NULL;
+@@ -679,7 +679,7 @@
+ dir_entry *dentptr;
+ __u16 prevcksum = 0xffff;
+ char *subname = "";
+- int rootdir_size, cursect;
++ int rootdir_size, cursect, curclus;
+ int idx, isdir = 0;
+ int files = 0, dirs = 0;
+ long ret = 0;
+@@ -697,6 +697,7 @@
+ mydata->fat_sect = bs.reserved;
+ cursect = mydata->rootdir_sect
+ = mydata->fat_sect + mydata->fatlength * bs.fats;
++ curclus = bs.root_cluster; // For FAT32 only
+ mydata->clust_size = bs.cluster_size;
+ if (mydata->fatsize == 32) {
+ rootdir_size = mydata->clust_size;
+@@ -818,7 +819,16 @@
+
+ goto rootdir_done; /* We got a match */
+ }
+- cursect++;
++
++ if (mydata->fatsize != 32)
++ cursect++;
++ else {
++ // FAT32 does not guarantee contiguous root directory
++ curclus = get_fatent (mydata, curclus);
++ cursect = (curclus * mydata->clust_size) + mydata->data_begin;
++
++ FAT_DPRINT ("root clus %d sector %d\n", curclus, cursect);
++ }
+ }
+ rootdir_done:
+
+diff -uNr x-load-f243938.orig/.gitignore x-load-f243938/.gitignore
+--- x-load-f243938.orig/.gitignore 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/.gitignore 2012-06-07 14:45:39.437648667 -0300
+@@ -0,0 +1,50 @@
++#
++# NOTE! Don't add files that are generated in specific
++# subdirectories here. Add them in the ".gitignore" file
++# in that subdirectory instead.
++#
++# Normal rules
++#
++.*
++*.o
++*.o.*
++*.a
++*.s
++*.ko
++*.so
++*.so.dbg
++*.mod.c
++*.i
++*.lst
++*.symtypes
++
++#
++# Top-level generic files
++#
++x-load
++x-load.*
++System.map
++include/asm/arch
++include/asm/proc
++include/config.h
++include/config.mk
++!.gitignore
++signGP
++MLO
++
++#
++# Generated include files
++#
++
++# stgit generated dirs
++patches-*
++
++# quilt's files
++patches
++series
++
++# cscope files
++cscope.*
++
++*.orig
++*.rej
+diff -uNr x-load-f243938.orig/include/asm/arch-omap3/mem.h x-load-f243938/include/asm/arch-omap3/mem.h
+--- x-load-f243938.orig/include/asm/arch-omap3/mem.h 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap3/mem.h 2012-06-07 14:45:39.453648667 -0300
+@@ -74,6 +74,7 @@
+ #define SDP_SDRC_MDCFG_0_DDR (0x02584019|B_ALL)
+ #define SDP_SDRC_MDCFG_0_DDR_MICRON_XM (0x03588019|B_ALL)
+ #define SDP_SDRC_MDCFG_0_DDR_NUMONYX_XM (0x04590019|B_ALL)
++#define SDP_SDRC_MDCFG_0_DDR_HYNIX (0x03588019|B_ALL)
+ #endif
+
+ #define SDP_SDRC_MR_0_DDR 0x00000032
+@@ -295,6 +296,46 @@
+ #define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | (NUMONYX_XSR_165 << 0)) | \
+ (NUMONYX_TXP_165 << 8) | (NUMONYX_TWTR_165 << 16)
+
++/*
++ * Hynix part of Overo (165MHz optimized) 6.06ns
++ * ACTIMA
++ * ACTIMA
++ * TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6
++ * TDPL (Twr) = 15/6 = 2.5 -> 3
++ * TRRD = 12/6 = 2
++ * TRCD = 18/6 = 3
++ * TRP = 18/6 = 3
++ * TRAS = 42/6 = 7
++ * TRC = 60/6 = 10
++ * TRFC = 97.5/6 = 17
++ * ACTIMB
++ * TWTR = 1
++ * TCKE = 1
++ * TXP = 1+1
++ * XSR = 140/6 = 24
++ */
++#define HYNIX_TDAL_165 6
++#define HYNIX_TDPL_165 3
++#define HYNIX_TRRD_165 2
++#define HYNIX_TRCD_165 3
++#define HYNIX_TRP_165 3
++#define HYNIX_TRAS_165 7
++#define HYNIX_TRC_165 10
++#define HYNIX_TRFC_165 21
++#define HYNIX_V_ACTIMA_165 ((HYNIX_TRFC_165 << 27) | \
++ (HYNIX_TRC_165 << 22) | (HYNIX_TRAS_165 << 18) | \
++ (HYNIX_TRP_165 << 15) | (HYNIX_TRCD_165 << 12) | \
++ (HYNIX_TRRD_165 << 9) | (HYNIX_TDPL_165 << 6) | \
++ (HYNIX_TDAL_165))
++
++#define HYNIX_TWTR_165 1
++#define HYNIX_TCKE_165 1
++#define HYNIX_TXP_165 2
++#define HYNIX_XSR_165 24
++#define HYNIX_V_ACTIMB_165 ((HYNIX_TCKE_165 << 12) | \
++ (HYNIX_XSR_165 << 0) | (HYNIX_TXP_165 << 8) | \
++ (HYNIX_TWTR_165 << 16))
++
+ /* New and compatability speed defines */
+ #if defined(PRCM_CLK_CFG2_200MHZ) || defined(PRCM_CONFIG_II) || defined(PRCM_CONFIG_5B)
+ # define L3_100MHZ /* Use with <= 100MHz SDRAM */
+diff -uNr x-load-f243938.orig/include/asm/arch-omap3/omap3430.h x-load-f243938/include/asm/arch-omap3/omap3430.h
+--- x-load-f243938.orig/include/asm/arch-omap3/omap3430.h 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap3/omap3430.h 2012-06-07 14:45:39.453648667 -0300
+@@ -138,4 +138,60 @@
+ #define ENHANCED_UI_EE_NAME "750-2075"
+ #endif
+
++/*
++ * 343x real hardware:
++ * ES1 = rev 0
++ *
++ * ES2 onwards, the value maps to contents of IDCODE register [31:28].
++ *
++ * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing.
++ */
++#define CPU_3XX_ES10 0
++#define CPU_3XX_ES20 1
++#define CPU_3XX_ES21 2
++#define CPU_3XX_ES30 3
++#define CPU_3XX_ES31 4
++#define CPU_3XX_ES312 7
++#define CPU_3XX_MAX_REV 8
++
++#define CPU_3XX_ID_SHIFT 28
++
++#define WIDTH_8BIT 0x0000
++#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
++
++/*
++ * Control idcode register contains hawkeye and revision info
++ */
++#define CONTROL_IDCODE 0x4830A204
++#define CONTROL_OMAP_STATUS 0x4800244C
++
++/*
++ * Hawkeye values
++ */
++#define HAWKEYE_OMAP34XX 0xb7ae
++#define HAWKEYE_AM35XX 0xb868
++#define HAWKEYE_OMAP36XX 0xb891
++
++#define HAWKEYE_SHIFT 12
++
++/*
++ * Define CPU families
++ */
++#define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */
++#define CPU_AM35XX 0x3500 /* AM35xx devices */
++#define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */
++
++/*
++ * Control status register values corresponding to cpu variants
++ */
++#define OMAP3503 0x5c00
++#define OMAP3515 0x1c00
++#define OMAP3525 0x4c00
++#define OMAP3530 0x0c00
++
++#define AM3505 0x5c00
++#define AM3517 0x1c00
++
++#define OMAP3730 0x0c00
++
+ #endif /* _OMAP3430_SYS_H_ */
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/bits.h x-load-f243938/include/asm/arch-omap4/bits.h
+--- x-load-f243938.orig/include/asm/arch-omap4/bits.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/bits.h 2012-06-07 14:45:39.453648667 -0300
+@@ -0,0 +1,48 @@
++/* bits.h
++ * Copyright (c) 2004-2009 Texas Instruments
++ *
++ * This package is free software; you can redistribute it and/or
++ * modify it under the terms of the license found in the file
++ * named COPYING that should have accompanied this file.
++ *
++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
++ */
++#ifndef __bits_h
++#define __bits_h 1
++
++#define BIT0 (1<<0)
++#define BIT1 (1<<1)
++#define BIT2 (1<<2)
++#define BIT3 (1<<3)
++#define BIT4 (1<<4)
++#define BIT5 (1<<5)
++#define BIT6 (1<<6)
++#define BIT7 (1<<7)
++#define BIT8 (1<<8)
++#define BIT9 (1<<9)
++#define BIT10 (1<<10)
++#define BIT11 (1<<11)
++#define BIT12 (1<<12)
++#define BIT13 (1<<13)
++#define BIT14 (1<<14)
++#define BIT15 (1<<15)
++#define BIT16 (1<<16)
++#define BIT17 (1<<17)
++#define BIT18 (1<<18)
++#define BIT19 (1<<19)
++#define BIT20 (1<<20)
++#define BIT21 (1<<21)
++#define BIT22 (1<<22)
++#define BIT23 (1<<23)
++#define BIT24 (1<<24)
++#define BIT25 (1<<25)
++#define BIT26 (1<<26)
++#define BIT27 (1<<27)
++#define BIT28 (1<<28)
++#define BIT29 (1<<29)
++#define BIT30 (1<<30)
++#define BIT31 (1<<31)
++
++#endif
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/clocks443x.h x-load-f243938/include/asm/arch-omap4/clocks443x.h
+--- x-load-f243938.orig/include/asm/arch-omap4/clocks443x.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/clocks443x.h 2012-06-07 14:45:39.453648667 -0300
+@@ -0,0 +1,154 @@
++/*
++ * (C) Copyright 2006-2009
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++#ifndef _OMAP443X_CLOCKS_H_
++#define _OMAP443X_CLOCKS_H_
++
++#define PLL_STOP 1 /* PER & IVA */
++#define PLL_MN_POWER_BYPASS 4
++#define PLL_LOW_POWER_BYPASS 5 /* MPU, IVA & CORE */
++#define PLL_FAST_RELOCK_BYPASS 6 /* CORE */
++#define PLL_LOCK 7 /* MPU, IVA, CORE & PER */
++
++/* The following configurations are OPP and SysClk value independant
++ * and hence are defined here. All the other DPLL related values are
++ * tabulated in lowlevel_init.S.
++ */
++
++/* CORE DPLL */
++# define CORE_M3X2 2 /* 332MHz : CM_CLKSEL1_EMU */
++# define CORE_SSI_DIV 3 /* 221MHz : CM_CLKSEL_CORE */
++# define CORE_FUSB_DIV 2 /* 41.5MHz: */
++# define CORE_L4_DIV 2 /* 83MHz : L4 */
++# define CORE_L3_DIV 2 /* 166MHz : L3 {DDR} */
++# define GFX_DIV 2 /* 83MHz : CM_CLKSEL_GFX */
++# define WKUP_RSM 2 /* 41.5MHz: CM_CLKSEL_WKUP */
++
++/* PER DPLL */
++# define PER_M6X2 3 /* 288MHz: CM_CLKSEL1_EMU */
++# define PER_M5X2 4 /* 216MHz: CM_CLKSEL_CAM */
++# define PER_M4X2 9 /* 96MHz : CM_CLKSEL_DSS-dss1 */
++# define PER_M3X2 16 /* 54MHz : CM_CLKSEL_DSS-tv */
++
++# define CLSEL1_EMU_VAL ((CORE_M3X2 << 16) | (PER_M6X2 << 24) | (0x0a50))
++
++#ifdef PRCM_CLK_CFG2_332MHZ
++# define M_12 0xA6
++# define N_12 0x05
++# define FSEL_12 0x07
++# define M2_12 0x01 /* M3 of 2 */
++
++# define M_12_ES1 0x0E
++# define FSL_12_ES1 0x03
++# define M2_12_ES1 0x1 /* M3 of 2 */
++
++# define M_13 0x14C
++# define N_13 0x0C
++# define FSEL_13 0x03
++# define M2_13 0x01 /* M3 of 2 */
++
++# define M_13_ES1 0x1B2
++# define N_13_ES1 0x10
++# define FSL_13_ES1 0x03
++# define M2_13_ES1 0x01 /* M3 of 2 */
++
++# define M_19p2 0x19F
++# define N_19p2 0x17
++# define FSEL_19p2 0x03
++# define M2_19p2 0x01 /* M3 of 2 */
++
++# define M_19p2_ES1 0x19F
++# define N_19p2_ES1 0x17
++# define FSL_19p2_ES1 0x03
++# define M2_19p2_ES1 0x01 /* M3 of 2 */
++
++# define M_26 0xA6
++# define N_26 0x0C
++# define FSEL_26 0x07
++# define M2_26 0x01 /* M3 of 2 */
++
++# define M_26_ES1 0x1B2
++# define N_26_ES1 0x21
++# define FSL_26_ES1 0x03
++# define M2_26_ES1 0x01 /* M3 of 2 */
++
++# define M_38p4 0x19F
++# define N_38p4 0x2F
++# define FSEL_38p4 0x03
++# define M2_38p4 0x01 /* M3 of 2 */
++
++# define M_38p4_ES1 0x19F
++# define N_38p4_ES1 0x2F
++# define FSL_38p4_ES1 0x03
++# define M2_38p4_ES1 0x01 /* M3 of 2 */
++
++#elif defined(PRCM_CLK_CFG2_266MHZ)
++# define M_12 0x85
++# define N_12 0x05
++# define FSEL_12 0x07
++# define M2_12 0x02 /* M3 of 2 */
++
++# define M_12_ES1 0x85 /* 0x10A */
++# define N_12_ES1 0x05 /* 0x05 */
++# define FSL_12_ES1 0x07 /* 0x7 */
++# define M2_12_ES1 0x2 /* 0x2 with an M3 of 4*/
++
++# define M_13 0x10A
++# define N_13 0x0C
++# define FSEL_13 0x3
++# define M2_13 0x1 /* M3 of 2 */
++
++# define M_13_ES1 0x10A /* 0x214 */
++# define N_13_ES1 0x0C /* 0xC */
++# define FSL_13_ES1 0x3 /* 0x3 */
++# define M2_13_ES1 0x1 /* 0x2 with an M3 of 4*/
++
++# define M_19p2 0x115
++# define N_19p2 0x13
++# define FSEL_19p2 0x03
++# define M2_19p2 0x01 /* M3 of 2 */
++
++# define M_19p2_ES1 0x115 /* 0x299 */
++# define N_19p2_ES1 0x13 /* 0x17 */
++# define FSL_19p2_ES1 0x03 /* 0x03 */
++# define M2_19p2_ES1 0x01 /* 0x2 with M3 of 4 */
++
++# define M_26 0x85
++# define N_26 0x0C
++# define FSEL_26 0x07
++# define M2_26 0x01 /* M3 of 2 */
++
++# define M_26_ES1 0x85 /* 0x10A */
++# define N_26_ES1 0x0C /* 0xC */
++# define FSL_26_ES1 0x07 /* 0x7 */
++# define M2_26_ES1 0x01 /* 0x2 with an M3 of 4 */
++
++# define M_38p4 0x11C
++# define N_38p4 0x28
++# define FSEL_38p4 0x03
++# define M2_38p4 0x01 /* M3 of 2 */
++
++# define M_38p4_ES1 0x11C /* 0x299 */
++# define N_38p4_ES1 0x28 /* 0x2f */
++# define FSL_38p4_ES1 0x03 /* 0x3 */
++# define M2_38p4_ES1 0x01 /* 0x2 with an M3 of 4*/
++
++#endif
++
++#endif /* endif _OMAP443X_CLOCKS_H_ */
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/clocks.h x-load-f243938/include/asm/arch-omap4/clocks.h
+--- x-load-f243938.orig/include/asm/arch-omap4/clocks.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/clocks.h 2012-06-07 14:45:39.453648667 -0300
+@@ -0,0 +1,36 @@
++/*
++ * (C) Copyright 2006-2009
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++#ifndef _OMAP44XX_CLOCKS_H_
++#define _OMAP44XX_CLOCKS_H_
++
++#define LDELAY 12000000
++
++#define S12M 12000000
++#define S13M 13000000
++#define S16_8M 16800000
++#define S19_2M 19200000
++#define S24M 24000000
++#define S26M 26000000
++#define S27M 27000000
++#define S38_4M 38400000
++
++#include <asm/arch/clocks443x.h>
++
++#endif
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/cpu.h x-load-f243938/include/asm/arch-omap4/cpu.h
+--- x-load-f243938.orig/include/asm/arch-omap4/cpu.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/cpu.h 2012-06-07 14:45:39.453648667 -0300
+@@ -0,0 +1,464 @@
++/*
++ * (C) Copyright 2006-2009
++ * Texas Instruments, <www.ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#ifndef _OMAP44XX_CPU_H
++#define _OMAP44XX_CPU_H
++#include <asm/arch/omap4430.h>
++
++/* Register offsets of common modules */
++/* Control */
++#define CONTROL_STATUS (OMAP44XX_CTRL_BASE + 0x2F0)
++#define OMAP44XX_MCR (OMAP44XX_CTRL_BASE + 0x8C)
++#define CONTROL_SCALABLE_OMAP_STATUS (OMAP44XX_CTRL_BASE + 0x44C)
++#define CONTROL_SCALABLE_OMAP_OCP (OMAP44XX_CTRL_BASE + 0x534)
++
++
++/* Tap Information */
++#define TAP_IDCODE_REG (OMAP44XX_TAP_BASE+0x204)
++#define PRODUCTION_ID (OMAP44XX_TAP_BASE+0x208)
++
++/* device type */
++#define DEVICE_MASK (BIT8|BIT9|BIT10)
++#define TST_DEVICE 0x0
++#define EMU_DEVICE 0x1
++#define HS_DEVICE 0x2
++#define GP_DEVICE 0x3
++
++/* GPMC CS3/cs4/cs6 not avaliable */
++#define GPMC_BASE (OMAP44XX_GPMC_BASE)
++#define GPMC_SYSCONFIG (OMAP44XX_GPMC_BASE+0x10)
++#define GPMC_IRQSTATUS (OMAP44XX_GPMC_BASE+0x18)
++#define GPMC_IRQENABLE (OMAP44XX_GPMC_BASE+0x1C)
++#define GPMC_TIMEOUT_CONTROL (OMAP44XX_GPMC_BASE+0x40)
++#define GPMC_CONFIG (OMAP44XX_GPMC_BASE+0x50)
++#define GPMC_STATUS (OMAP44XX_GPMC_BASE+0x54)
++
++#define GPMC_CONFIG_CS0 (OMAP44XX_GPMC_BASE+0x60)
++#define GPMC_CONFIG_WIDTH (0x30)
++
++#define GPMC_CONFIG1 (0x00)
++#define GPMC_CONFIG2 (0x04)
++#define GPMC_CONFIG3 (0x08)
++#define GPMC_CONFIG4 (0x0C)
++#define GPMC_CONFIG5 (0x10)
++#define GPMC_CONFIG6 (0x14)
++#define GPMC_CONFIG7 (0x18)
++#define GPMC_NAND_CMD (0x1C)
++#define GPMC_NAND_ADR (0x20)
++#define GPMC_NAND_DAT (0x24)
++
++#define GPMC_ECC_CONFIG (0x1F4)
++#define GPMC_ECC_CONTROL (0x1F8)
++#define GPMC_ECC_SIZE_CONFIG (0x1FC)
++#define GPMC_ECC1_RESULT (0x200)
++#define GPMC_ECC2_RESULT (0x204)
++#define GPMC_ECC3_RESULT (0x208)
++#define GPMC_ECC4_RESULT (0x20C)
++#define GPMC_ECC5_RESULT (0x210)
++#define GPMC_ECC6_RESULT (0x214)
++#define GPMC_ECC7_RESULT (0x218)
++#define GPMC_ECC8_RESULT (0x21C)
++#define GPMC_ECC9_RESULT (0x220)
++
++#define GPMC_PREFETCH_CONFIG1 (0x1e0)
++#define GPMC_PREFETCH_CONFIG2 (0x1e4)
++#define GPMC_PREFETCH_CONTROL (0x1ec)
++#define GPMC_PREFETCH_STATUS (0x1f0)
++
++/* GPMC Mapping */
++# define FLASH_BASE 0x10000000 /* NOR flash (aligned to 256 Meg) */
++# define FLASH_BASE_SDPV1 0x04000000 /* NOR flash (aligned to 64 Meg) */
++# define FLASH_BASE_SDPV2 0x10000000 /* NOR flash (aligned to 256 Meg) */
++# define DEBUG_BASE 0x08000000 /* debug board */
++# define NAND_BASE 0x30000000 /* NAND addr (actual size small port)*/
++# define PISMO2_BASE 0x18000000 /* PISMO2 CS1/2 */
++# define ONENAND_MAP 0x20000000 /* OneNand addr (actual size small port */
++
++/* DMM */
++#define DMM_SYSCONFIG (OMAP44XX_DMM_BASE+0x10)
++#define DMM_LISA_MAP (OMAP44XX_DMM_BASE+0x100)
++
++/* SMS */
++#define SMS_SYSCONFIG (OMAP44XX_SMS_BASE+0x10)
++#define SMS_RG_ATT0 (OMAP44XX_SMS_BASE+0x48)
++#define SMS_CLASS_ARB0 (OMAP44XX_SMS_BASE+0xD0)
++#define BURSTCOMPLETE_GROUP7 BIT31
++
++#define SDRC_CS_CFG (OMAP44XX_SDRC_BASE+0x40)
++#define OMAP44XX_SDRC_CS0 0x80000000
++#define SDRC_POWER (OMAP44XX_SDRC_BASE+0x70)
++#define SDRC_MCFG_0 (OMAP44XX_SDRC_BASE+0x80)
++#define SDRC_MR_0 (OMAP44XX_SDRC_BASE+0x84)
++
++/* timer regs offsets (32 bit regs) */
++#define TIDR 0x0 /* r */
++#define TIOCP_CFG 0x10 /* rw */
++#define TISTAT 0x14 /* r */
++#define TISR 0x18 /* rw */
++#define TIER 0x1C /* rw */
++#define TWER 0x20 /* rw */
++#define TCLR 0x24 /* rw */
++#define TCRR 0x28 /* rw */
++#define TLDR 0x2C /* rw */
++#define TTGR 0x30 /* rw */
++#define TWPS 0x34 /* r */
++#define TMAR 0x38 /* rw */
++#define TCAR1 0x3c /* r */
++#define TSICR 0x40 /* rw */
++#define TCAR2 0x44 /* r */
++#define GPT_EN ((0<<2)|BIT1|BIT0) /* enable sys_clk NO-prescale /1 */
++
++/* Watchdog */
++#define WWPS 0x34 /* r */
++#define WSPR 0x48 /* rw */
++#define WD_UNLOCK1 0xAAAA
++#define WD_UNLOCK2 0x5555
++
++/* FIXME */
++#define PRM_RSTCTRL 0x48307250
++ /* PRCM */
++#define CM_SYS_CLKSEL 0x4a306110
++
++/* PRM.CKGEN module registers */
++#define CM_ABE_PLL_REF_CLKSEL 0x4a30610c
++
++
++/* PRM.WKUP_CM module registers */
++#define CM_WKUP_CLKSTCTRL 0x4a307800
++#define CM_WKUP_L4WKUP_CLKCTRL 0x4a307820
++#define CM_WKUP_WDT1_CLKCTRL 0x4a307828
++#define CM_WKUP_WDT2_CLKCTRL 0x4a307830
++#define CM_WKUP_GPIO1_CLKCTRL 0x4a307838
++#define CM_WKUP_TIMER1_CLKCTRL 0x4a307840
++#define CM_WKUP_TIMER12_CLKCTRL 0x4a307848
++#define CM_WKUP_SYNCTIMER_CLKCTRL 0x4a307850
++#define CM_WKUP_USIM_CLKCTRL 0x4a307858
++#define CM_WKUP_SARRAM_CLKCTRL 0x4a307860
++#define CM_WKUP_KEYBOARD_CLKCTRL 0x4a307878
++#define CM_WKUP_RTC_CLKCTRL 0x4a307880
++#define CM_WKUP_BANDGAP_CLKCTRL 0x4a307888
++
++/* CM1.CKGEN module registers */
++#define CM_CLKSEL_CORE 0x4a004100
++#define CM_CLKSEL_ABE 0x4a004108
++#define CM_DLL_CTRL 0x4a004110
++#define CM_CLKMODE_DPLL_CORE 0x4a004120
++#define CM_IDLEST_DPLL_CORE 0x4a004124
++#define CM_AUTOIDLE_DPLL_CORE 0x4a004128
++#define CM_CLKSEL_DPLL_CORE 0x4a00412c
++#define CM_DIV_M2_DPLL_CORE 0x4a004130
++#define CM_DIV_M3_DPLL_CORE 0x4a004134
++#define CM_DIV_M4_DPLL_CORE 0x4a004138
++#define CM_DIV_M5_DPLL_CORE 0x4a00413c
++#define CM_DIV_M6_DPLL_CORE 0x4a004140
++#define CM_DIV_M7_DPLL_CORE 0x4a004144
++#define CM_SSC_DELTAMSTEP_DPLL_CORE 0x4a004148
++#define CM_SSC_MODFREQDIV_DPLL_CORE 0x4a00414c
++#define CM_EMU_OVERRIDE_DPLL_CORE 0x4a004150
++#define CM_CLKMODE_DPLL_MPU 0x4a004160
++#define CM_IDLEST_DPLL_MPU 0x4a004164
++#define CM_AUTOIDLE_DPLL_MPU 0x4a004168
++#define CM_CLKSEL_DPLL_MPU 0x4a00416c
++#define CM_DIV_M2_DPLL_MPU 0x4a004170
++#define CM_SSC_DELTAMSTEP_DPLL_MPU 0x4a004188
++#define CM_SSC_MODFREQDIV_DPLL_MPU 0x4a00418c
++#define CM_BYPCLK_DPLL_MPU 0x4a00419c
++#define CM_CLKMODE_DPLL_IVA 0x4a0041a0
++#define CM_IDLEST_DPLL_IVA 0x4a0041a4
++#define CM_AUTOIDLE_DPLL_IVA 0x4a0041a8
++#define CM_CLKSEL_DPLL_IVA 0x4a0041ac
++#define CM_DIV_M4_DPLL_IVA 0x4a0041b8
++#define CM_DIV_M5_DPLL_IVA 0x4a0041bc
++#define CM_SSC_DELTAMSTEP_DPLL_IVA 0x4a0041c8
++#define CM_SSC_MODFREQDIV_DPLL_IVA 0x4a0041cc
++#define CM_BYPCLK_DPLL_IVA 0x4a0041dc
++#define CM_CLKMODE_DPLL_ABE 0x4a0041e0
++#define CM_IDLEST_DPLL_ABE 0x4a0041e4
++#define CM_AUTOIDLE_DPLL_ABE 0x4a0041e8
++#define CM_CLKSEL_DPLL_ABE 0x4a0041ec
++#define CM_DIV_M2_DPLL_ABE 0x4a0041f0
++#define CM_DIV_M3_DPLL_ABE 0x4a0041f4
++#define CM_SSC_DELTAMSTEP_DPLL_ABE 0x4a004208
++#define CM_SSC_MODFREQDIV_DPLL_ABE 0x4a00420c
++#define CM_CLKMODE_DPLL_DDRPHY 0x4a004220
++#define CM_IDLEST_DPLL_DDRPHY 0x4a004224
++#define CM_AUTOIDLE_DPLL_DDRPHY 0x4a004228
++#define CM_CLKSEL_DPLL_DDRPHY 0x4a00422c
++#define CM_DIV_M2_DPLL_DDRPHY 0x4a004230
++#define CM_DIV_M4_DPLL_DDRPHY 0x4a004238
++#define CM_DIV_M5_DPLL_DDRPHY 0x4a00423c
++#define CM_DIV_M6_DPLL_DDRPHY 0x4a004240
++#define CM_SSC_DELTAMSTEP_DPLL_DDRPHY 0x4a004248
++
++/* CM1.ABE register offsets */
++#define CM1_ABE_CLKSTCTRL 0x4a004500
++#define CM1_ABE_L4ABE_CLKCTRL 0x4a004520
++#define CM1_ABE_AESS_CLKCTRL 0x4a004528
++#define CM1_ABE_PDM_CLKCTRL 0x4a004530
++#define CM1_ABE_DMIC_CLKCTRL 0x4a004538
++#define CM1_ABE_MCASP_CLKCTRL 0x4a004540
++#define CM1_ABE_MCBSP1_CLKCTRL 0x4a004548
++#define CM1_ABE_MCBSP2_CLKCTRL 0x4a004550
++#define CM1_ABE_MCBSP3_CLKCTRL 0x4a004558
++#define CM1_ABE_SLIMBUS_CLKCTRL 0x4a004560
++#define CM1_ABE_TIMER5_CLKCTRL 0x4a004568
++#define CM1_ABE_TIMER6_CLKCTRL 0x4a004570
++#define CM1_ABE_TIMER7_CLKCTRL 0x4a004578
++#define CM1_ABE_TIMER8_CLKCTRL 0x4a004580
++#define CM1_ABE_WDT3_CLKCTRL 0x4a004588
++
++/* CM1.DSP register offsets */
++#define DSP_CLKSTCTRL 0x4a004400
++#define DSP_DSP_CLKCTRL 0x4a004420
++
++/* CM2.CKGEN module registers */
++#define CM_CLKSEL_DUCATI_ISS_ROOT 0x4a008100
++#define CM_CLKSEL_USB_60MHz 0x4a008104
++#define CM_SCALE_FCLK 0x4a008108
++#define CM_CORE_DVFS_PERF1 0x4a008110
++#define CM_CORE_DVFS_PERF2 0x4a008114
++#define CM_CORE_DVFS_PERF3 0x4a008118
++#define CM_CORE_DVFS_PERF4 0x4a00811c
++#define CM_CORE_DVFS_CURRENT 0x4a008124
++#define CM_IVA_DVFS_PERF_TESLA 0x4a008128
++#define CM_IVA_DVFS_PERF_IVAHD 0x4a00812c
++#define CM_IVA_DVFS_PERF_ABE 0x4a008130
++#define CM_IVA_DVFS_CURRENT 0x4a008138
++#define CM_CLKMODE_DPLL_PER 0x4a008140
++#define CM_IDLEST_DPLL_PER 0x4a008144
++#define CM_AUTOIDLE_DPLL_PER 0x4a008148
++#define CM_CLKSEL_DPLL_PER 0x4a00814c
++#define CM_DIV_M2_DPLL_PER 0x4a008150
++#define CM_DIV_M3_DPLL_PER 0x4a008154
++#define CM_DIV_M4_DPLL_PER 0x4a008158
++#define CM_DIV_M5_DPLL_PER 0x4a00815c
++#define CM_DIV_M6_DPLL_PER 0x4a008160
++#define CM_DIV_M7_DPLL_PER 0x4a008164
++#define CM_SSC_DELTAMSTEP_DPLL_PER 0x4a008168
++#define CM_SSC_MODFREQDIV_DPLL_PER 0x4a00816c
++#define CM_EMU_OVERRIDE_DPLL_PER 0x4a008170
++#define CM_CLKMODE_DPLL_USB 0x4a008180
++#define CM_IDLEST_DPLL_USB 0x4a008184
++#define CM_AUTOIDLE_DPLL_USB 0x4a008188
++#define CM_CLKSEL_DPLL_USB 0x4a00818c
++#define CM_DIV_M2_DPLL_USB 0x4a008190
++#define CM_SSC_DELTAMSTEP_DPLL_USB 0x4a0081a8
++#define CM_SSC_MODFREQDIV_DPLL_USB 0x4a0081ac
++#define CM_CLKDCOLDO_DPLL_USB 0x4a0081b4
++#define CM_CLKMODE_DPLL_UNIPRO 0x4a0081c0
++#define CM_IDLEST_DPLL_UNIPRO 0x4a0081c4
++#define CM_AUTOIDLE_DPLL_UNIPRO 0x4a0081c8
++#define CM_CLKSEL_DPLL_UNIPRO 0x4a0081cc
++#define CM_DIV_M2_DPLL_UNIPRO 0x4a0081d0
++#define CM_SSC_DELTAMSTEP_DPLL_UNIPRO 0x4a0081e8
++#define CM_SSC_MODFREQDIV_DPLL_UNIPRO 0x4a0081ec
++
++/* CM2.CORE module registers */
++#define CM_L3_1_CLKSTCTRL 0x4a008700
++#define CM_L3_1_DYNAMICDEP 0x4a008708
++#define CM_L3_1_L3_1_CLKCTRL 0x4a008720
++#define CM_L3_2_CLKSTCTRL 0x4a008800
++#define CM_L3_2_DYNAMICDEP 0x4a008808
++#define CM_L3_2_L3_2_CLKCTRL 0x4a008820
++#define CM_L3_2_GPMC_CLKCTRL 0x4a008828
++#define CM_L3_2_OCMC_RAM_CLKCTRL 0x4a008830
++#define CM_DUCATI_CLKSTCTRL 0x4a008900
++#define CM_DUCATI_STATICDEP 0x4a008904
++#define CM_DUCATI_DYNAMICDEP 0x4a008908
++#define CM_DUCATI_DUCATI_CLKCTRL 0x4a008920
++#define CM_SDMA_CLKSTCTRL 0x4a008a00
++#define CM_SDMA_STATICDEP 0x4a008a04
++#define CM_SDMA_DYNAMICDEP 0x4a008a08
++#define CM_SDMA_SDMA_CLKCTRL 0x4a008a20
++#define CM_MEMIF_CLKSTCTRL 0x4a008b00
++#define CM_MEMIF_DMM_CLKCTRL 0x4a008b20
++#define CM_MEMIF_EMIF_FW_CLKCTRL 0x4a008b28
++#define CM_MEMIF_EMIF_1_CLKCTRL 0x4a008b30
++#define CM_MEMIF_EMIF_2_CLKCTRL 0x4a008b38
++#define CM_MEMIF_DLL_CLKCTRL 0x4a008b40
++#define CM_MEMIF_EMIF_H1_CLKCTRL 0x4a008b50
++#define CM_MEMIF_EMIF_H2_CLKCTRL 0x4a008b58
++#define CM_MEMIF_DLL_H_CLKCTRL 0x4a008b60
++#define CM_D2D_CLKSTCTRL 0x4a008c00
++#define CM_D2D_STATICDEP 0x4a008c04
++#define CM_D2D_DYNAMICDEP 0x4a008c08
++#define CM_D2D_SAD2D_CLKCTRL 0x4a008c20
++#define CM_D2D_MODEM_ICR_CLKCTRL 0x4a008c28
++#define CM_D2D_SAD2D_FW_CLKCTRL 0x4a008c30
++#define CM_L4CFG_CLKSTCTRL 0x4a008d00
++#define CM_L4CFG_DYNAMICDEP 0x4a008d08
++#define CM_L4CFG_L4_CFG_CLKCTRL 0x4a008d20
++#define CM_L4CFG_HW_SEM_CLKCTRL 0x4a008d28
++#define CM_L4CFG_MAILBOX_CLKCTRL 0x4a008d30
++#define CM_L4CFG_SAR_ROM_CLKCTRL 0x4a008d38
++#define CM_L3INSTR_CLKSTCTRL 0x4a008e00
++#define CM_L3INSTR_L3_3_CLKCTRL 0x4a008e20
++#define CM_L3INSTR_L3_INSTR_CLKCTRL 0x4a008e28
++#define CM_L3INSTR_OCP_WP1_CLKCTRL 0x4a008e40
++
++/* CM2.L4PER register offsets */
++#define CM_L4PER_CLKSTCTRL 0x4a009400
++#define CM_L4PER_DYNAMICDEP 0x4a009408
++#define CM_L4PER_ADC_CLKCTRL 0x4a009420
++#define CM_L4PER_DMTIMER10_CLKCTRL 0x4a009428
++#define CM_L4PER_DMTIMER11_CLKCTRL 0x4a009430
++#define CM_L4PER_DMTIMER2_CLKCTRL 0x4a009438
++#define CM_L4PER_DMTIMER3_CLKCTRL 0x4a009440
++#define CM_L4PER_DMTIMER4_CLKCTRL 0x4a009448
++#define CM_L4PER_DMTIMER9_CLKCTRL 0x4a009450
++#define CM_L4PER_ELM_CLKCTRL 0x4a009458
++#define CM_L4PER_GPIO2_CLKCTRL 0x4a009460
++#define CM_L4PER_GPIO3_CLKCTRL 0x4a009468
++#define CM_L4PER_GPIO4_CLKCTRL 0x4a009470
++#define CM_L4PER_GPIO5_CLKCTRL 0x4a009478
++#define CM_L4PER_GPIO6_CLKCTRL 0x4a009480
++#define CM_L4PER_HDQ1W_CLKCTRL 0x4a009488
++#define CM_L4PER_HECC1_CLKCTRL 0x4a009490
++#define CM_L4PER_HECC2_CLKCTRL 0x4a009498
++#define CM_L4PER_I2C1_CLKCTRL 0x4a0094a0
++#define CM_L4PER_I2C2_CLKCTRL 0x4a0094a8
++#define CM_L4PER_I2C3_CLKCTRL 0x4a0094b0
++#define CM_L4PER_I2C4_CLKCTRL 0x4a0094b8
++#define CM_L4PER_L4PER_CLKCTRL 0x4a0094c0
++#define CM_L4PER_MCASP2_CLKCTRL 0x4a0094d0
++#define CM_L4PER_MCASP3_CLKCTRL 0x4a0094d8
++#define CM_L4PER_MCBSP4_CLKCTRL 0x4a0094e0
++#define CM_L4PER_MGATE_CLKCTRL 0x4a0094e8
++#define CM_L4PER_MCSPI1_CLKCTRL 0x4a0094f0
++#define CM_L4PER_MCSPI2_CLKCTRL 0x4a0094f8
++#define CM_L4PER_MCSPI3_CLKCTRL 0x4a009500
++#define CM_L4PER_MCSPI4_CLKCTRL 0x4a009508
++#define CM_L4PER_MMCSD3_CLKCTRL 0x4a009520
++#define CM_L4PER_MMCSD4_CLKCTRL 0x4a009528
++#define CM_L4PER_MSPROHG_CLKCTRL 0x4a009530
++#define CM_L4PER_SLIMBUS2_CLKCTRL 0x4a009538
++#define CM_L4PER_UART1_CLKCTRL 0x4a009540
++#define CM_L4PER_UART2_CLKCTRL 0x4a009548
++#define CM_L4PER_UART3_CLKCTRL 0x4a009550
++#define CM_L4PER_UART4_CLKCTRL 0x4a009558
++#define CM_L4PER_MMCSD5_CLKCTRL 0x4a009560
++#define CM_L4PER_I2C5_CLKCTRL 0x4a009568
++#define CM_L4SEC_CLKSTCTRL 0x4a009580
++#define CM_L4SEC_STATICDEP 0x4a009584
++#define CM_L4SEC_DYNAMICDEP 0x4a009588
++#define CM_L4SEC_AES1_CLKCTRL 0x4a0095a0
++#define CM_L4SEC_AES2_CLKCTRL 0x4a0095a8
++#define CM_L4SEC_DES3DES_CLKCTRL 0x4a0095b0
++#define CM_L4SEC_PKAEIP29_CLKCTRL 0x4a0095b8
++#define CM_L4SEC_RNG_CLKCTRL 0x4a0095c0
++#define CM_L4SEC_SHA2MD51_CLKCTRL 0x4a0095c8
++#define CM_L4SEC_CRYPTODMA_CLKCTRL 0x4a0095d8
++
++/* CM2.IVAHD */
++#define IVAHD_CLKSTCTRL 0x4a008f00
++#define IVAHD_IVAHD_CLKCTRL 0x4a008f20
++#define IVAHD_SL2_CLKCTRL 0x4a008f28
++
++/* CM2.L3INIT */
++#define CM_L3INIT_HSMMC1_CLKCTRL 0x4a009328
++#define CM_L3INIT_HSMMC2_CLKCTRL 0x4a009330
++#define CM_L3INIT_HSI_CLKCTRL 0x4a009338
++#define CM_L3INIT_UNIPRO1_CLKCTRL 0x4a009340
++#define CM_L3INIT_HSUSBHOST_CLKCTRL 0x4a009358
++#define CM_L3INIT_HSUSBOTG_CLKCTRL 0x4a009360
++#define CM_L3INIT_HSUSBTLL_CLKCTRL 0x4a009368
++#define CM_L3INIT_P1500_CLKCTRL 0x4a009378
++#define CM_L3INIT_FSUSB_CLKCTRL 0x4a0093d0
++#define CM_L3INIT_USBPHY_CLKCTRL 0x4a0093e0
++
++/* CM2.CAM */
++#define CM_CAM_CLKSTCTRL 0x4a009000
++#define CM_CAM_ISS_CLKCTRL 0x4a009020
++#define CM_CAM_FDIF_CLKCTRL 0x4a009028
++
++/* CM2.DSS */
++#define CM_DSS_CLKSTCTRL 0x4a009100
++#define CM_DSS_DSS_CLKCTRL 0x4a009120
++#define CM_DSS_DEISS_CLKCTRL 0x4a009128
++
++/* CM2.SGX */
++#define CM_SGX_CLKSTCTRL 0x4a009200
++#define CM_SGX_SGX_CLKCTRL 0x4a009220
++
++/* SMX-APE */
++#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000)
++#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400)
++#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800)
++#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00)
++#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000)
++
++#define RT_REQ_INFO_PERMISSION_1 (PM_RT_APE_BASE_ADDR_ARM + 0x68)
++#define RT_READ_PERMISSION_0 (PM_RT_APE_BASE_ADDR_ARM + 0x50)
++#define RT_WRITE_PERMISSION_0 (PM_RT_APE_BASE_ADDR_ARM + 0x58)
++#define RT_ADDR_MATCH_1 (PM_RT_APE_BASE_ADDR_ARM + 0x60)
++
++#define GPMC_REQ_INFO_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x48)
++#define GPMC_READ_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x50)
++#define GPMC_WRITE_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x58)
++
++#define OCM_REQ_INFO_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x48)
++#define OCM_READ_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x50)
++#define OCM_WRITE_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x58)
++#define OCM_ADDR_MATCH_2 (PM_OCM_RAM_BASE_ADDR_ARM + 0x80)
++
++#define IVA2_REQ_INFO_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x48)
++#define IVA2_READ_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x50)
++#define IVA2_WRITE_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x58)
++
++#define IVA2_REQ_INFO_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x68)
++#define IVA2_READ_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x70)
++#define IVA2_WRITE_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x78)
++
++#define IVA2_REQ_INFO_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x88)
++#define IVA2_READ_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x90)
++#define IVA2_WRITE_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x98)
++
++#define IVA2_REQ_INFO_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xA8)
++#define IVA2_READ_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xB0)
++#define IVA2_WRITE_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xB8)
++
++/* I2C base */
++#define I2C_BASE1 (OMAP44XX_L4_PER + 0x70000)
++#define I2C_BASE2 (OMAP44XX_L4_PER + 0x72000)
++#define I2C_BASE3 (OMAP44XX_L4_PER + 0x60000)
++
++#ifdef CONFIG_LCD
++ extern void lcd_disable(void);
++ extern void lcd_panel_disable(void);
++#endif
++
++/* Silicon revisions */
++#define OMAP4430_SILICON_ID_INVALID 0
++#define OMAP4430_ES1_0 1
++#define OMAP4430_ES2_0 2
++#define OMAP4430_ES2_1 3
++
++#ifndef __ASSEMBLY__
++/*Functions for silicon revision */
++unsigned int omap_revision(void);
++unsigned int cortex_a9_rev(void);
++
++void big_delay(unsigned int count);
++#endif
++
++#endif
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/mem.h x-load-f243938/include/asm/arch-omap4/mem.h
+--- x-load-f243938.orig/include/asm/arch-omap4/mem.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/mem.h 2012-06-07 14:45:39.453648667 -0300
+@@ -0,0 +1,285 @@
++/*
++ * (C) Copyright 2006-2009
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef _OMAP44XX_MEM_H_
++#define _OMAP44XX_MEM_H_
++
++#ifndef __ASSEMBLY__
++
++typedef enum {
++ STACKED = 0,
++ IP_DDR = 1,
++ COMBO_DDR = 2,
++ IP_SDR = 3,
++} mem_t;
++
++/* Memory that can be connected to GPMC */
++#define GPMC_NOR 0
++#define GPMC_NAND 1
++#define GPMC_MDOC 2
++#define GPMC_ONENAND 3
++#define MMC_NAND 4
++#define MMC_ONENAND 5
++#define GPMC_NONE 6
++#define GPMC_ONENAND_TRY 7
++
++#endif
++
++
++/* New and compatability speed defines */
++#if defined(PRCM_CLK_CFG2_200MHZ) || defined(PRCM_CONFIG_II)\
++ || defined(PRCM_CONFIG_5B)
++# define L3_100MHZ /* Use with <= 100MHz SDRAM */
++#elif defined(PRCM_CLK_CFG2_266MHZ) || defined(PRCM_CONFIG_III)\
++ || defined(PRCM_CONFIG_5A)
++# define L3_133MHZ /* Use with <= 133MHz SDRAM*/
++#elif defined(PRCM_CLK_CFG2_332MHZ) || defined(PRCM_CONFIG_I) \
++ || defined(PRCM_CONFIG_2)
++# define L3_165MHZ /* Use with <= 165MHz SDRAM (L3=166 on 4430) */
++#endif
++
++/*
++ * GPMC settings -
++ * Definitions is as per the following format
++ * # define <PART>_GPMC_CONFIG<x> <value>
++ * Where:
++ * PART is the part name e.g. STNOR - Intel Strata Flash
++ * x is GPMC config registers from 1 to 6 (there will be 6 macros)
++ * Value is corresponding value
++ *
++ * For every valid PRCM configuration there should be only one definition of
++ * the same. if values are independent of the board, this definition will be
++ * present in this file if values are dependent on the board, then this should
++ * go into corresponding mem-boardName.h file
++ *
++ * Currently valid part Names are (PART):
++ * STNOR - Intel Strata Flash
++ * SMNAND - Samsung NAND
++ * M_NAND - Micron Large page x16 NAND
++ * MPDB - H4 MPDB board
++ * SBNOR - Sibley NOR
++ * ONNAND - Samsung One NAND
++ *
++ * include/configs/file.h contains the defn - for all CS we are interested
++ * #define OMAP44XX_GPMC_CSx PART
++ * #define OMAP44XX_GPMC_CSx_SIZE Size
++ * #define OMAP44XX_GPMC_CSx_MAP Map
++ * Where:
++ * x - CS number
++ * PART - Part Name as defined above
++ * SIZE - how big is the mapping to be
++ * GPMC_SIZE_128M - 0x8
++ * GPMC_SIZE_64M - 0xC
++ * GPMC_SIZE_32M - 0xE
++ * GPMC_SIZE_16M - 0xF
++ * MAP - Map this CS to which address(GPMC address space)- Absolute address
++ * >>24 before being used.
++ */
++#define GPMC_SIZE_128M 0x8
++#define GPMC_SIZE_64M 0xC
++#define GPMC_SIZE_32M 0xE
++#define GPMC_SIZE_16M 0xF
++
++#if defined(L3_100MHZ)
++# define SMNAND_GPMC_CONFIG1 0x0
++# define SMNAND_GPMC_CONFIG2 0x00141400
++# define SMNAND_GPMC_CONFIG3 0x00141400
++# define SMNAND_GPMC_CONFIG4 0x0F010F01
++# define SMNAND_GPMC_CONFIG5 0x010C1414
++# define SMNAND_GPMC_CONFIG6 0x00000A80
++
++# define M_NAND_GPMC_CONFIG1 0x00001800
++# define M_NAND_GPMC_CONFIG2 0x00141400
++# define M_NAND_GPMC_CONFIG3 0x00141400
++# define M_NAND_GPMC_CONFIG4 0x0F010F01
++# define M_NAND_GPMC_CONFIG5 0x010C1414
++# define M_NAND_GPMC_CONFIG6 0x1f0f0A80
++
++# define STNOR_GPMC_CONFIG1 0x3
++# define STNOR_GPMC_CONFIG2 0x000f0f01
++# define STNOR_GPMC_CONFIG3 0x00050502
++# define STNOR_GPMC_CONFIG4 0x0C060C06
++# define STNOR_GPMC_CONFIG5 0x01131F1F
++# define STNOR_GPMC_CONFIG6 0x1F0F0000
++
++# define MPDB_GPMC_CONFIG1 0x00011000
++# define MPDB_GPMC_CONFIG2 0x001F1F00
++# define MPDB_GPMC_CONFIG3 0x00080802
++# define MPDB_GPMC_CONFIG4 0x1C091C09
++# define MPDB_GPMC_CONFIG5 0x031A1F1F
++# define MPDB_GPMC_CONFIG6 0x000003C2
++#endif
++
++#if defined(L3_133MHZ)
++# define SMNAND_GPMC_CONFIG1 0x00000800
++# define SMNAND_GPMC_CONFIG2 0x00141400
++# define SMNAND_GPMC_CONFIG3 0x00141400
++# define SMNAND_GPMC_CONFIG4 0x0F010F01
++# define SMNAND_GPMC_CONFIG5 0x010C1414
++# define SMNAND_GPMC_CONFIG6 0x1F0F0A80
++# define SMNAND_GPMC_CONFIG7 0x00000C44
++
++# define M_NAND_GPMC_CONFIG1 0x00001800 /* might reuse smnand, with |= 1000 */
++# define M_NAND_GPMC_CONFIG2 0x00141400
++# define M_NAND_GPMC_CONFIG3 0x00141400
++# define M_NAND_GPMC_CONFIG4 0x0F010F01
++# define M_NAND_GPMC_CONFIG5 0x010C1414
++# define M_NAND_GPMC_CONFIG6 0x1F0F0A80
++# define M_NAND_GPMC_CONFIG7 0x00000C44
++
++# define STNOR_GPMC_CONFIG1 0x1203
++# define STNOR_GPMC_CONFIG2 0x00151501
++# define STNOR_GPMC_CONFIG3 0x00060602
++# define STNOR_GPMC_CONFIG4 0x10081008
++# define STNOR_GPMC_CONFIG5 0x01131F1F
++# define STNOR_GPMC_CONFIG6 0x1F0F04c4
++
++# define SIBNOR_GPMC_CONFIG1 0x1200
++# define SIBNOR_GPMC_CONFIG2 0x001f1f00
++# define SIBNOR_GPMC_CONFIG3 0x00080802
++# define SIBNOR_GPMC_CONFIG4 0x1C091C09
++# define SIBNOR_GPMC_CONFIG5 0x01131F1F
++# define SIBNOR_GPMC_CONFIG6 0x1F0F03C2
++
++/* ES1 SDP and ES1 chip Debug FPGA */
++# define MPDB_GPMC_CONFIG1 0x00011000
++# define MPDB_GPMC_CONFIG2 0x001f1f01
++# define MPDB_GPMC_CONFIG3 0x00080803
++# define MPDB_GPMC_CONFIG4 0x1C091C09
++# define MPDB_GPMC_CONFIG5 0x041f1F1F
++# define MPDB_GPMC_CONFIG6 0x000004C4
++
++/* ES2 SDP and ES2 chip Debug FPGA */
++# define SDPV2_MPDB_GPMC_CONFIG1 0x00611200
++# define SDPV2_MPDB_GPMC_CONFIG2 0x001F1F01
++# define SDPV2_MPDB_GPMC_CONFIG3 0x00080803
++# define SDPV2_MPDB_GPMC_CONFIG4 0x1D091D09
++# define SDPV2_MPDB_GPMC_CONFIG5 0x041D1F1F
++# define SDPV2_MPDB_GPMC_CONFIG6 0x1D0904C4
++
++# define P2_GPMC_CONFIG1 0x0
++# define P2_GPMC_CONFIG2 0x0
++# define P2_GPMC_CONFIG3 0x0
++# define P2_GPMC_CONFIG4 0x0
++# define P2_GPMC_CONFIG5 0x0
++# define P2_GPMC_CONFIG6 0x0
++
++# define ONENAND_GPMC_CONFIG1 0x00001200
++# define ONENAND_GPMC_CONFIG2 0x000c0c01
++# define ONENAND_GPMC_CONFIG3 0x00030301
++# define ONENAND_GPMC_CONFIG4 0x0c040c04
++# define ONENAND_GPMC_CONFIG5 0x010C1010
++# define ONENAND_GPMC_CONFIG6 0x1F060000
++
++#endif /* endif L3_133MHZ */
++
++#if defined(L3_165MHZ)
++# define SMNAND_GPMC_CONFIG1 0x00000800
++# define SMNAND_GPMC_CONFIG2 0x00060600
++# define SMNAND_GPMC_CONFIG3 0x00060401
++# define SMNAND_GPMC_CONFIG4 0x05010801
++# define SMNAND_GPMC_CONFIG5 0x00090B0B
++# define SMNAND_GPMC_CONFIG6 0x050001C0
++# define SMNAND_GPMC_CONFIG7 0x00000C44
++
++# define M_NAND_GPMC_CONFIG1 0x00001800
++# define M_NAND_GPMC_CONFIG2 0x00141400
++# define M_NAND_GPMC_CONFIG3 0x00141400
++# define M_NAND_GPMC_CONFIG4 0x0F010F01
++# define M_NAND_GPMC_CONFIG5 0x010C1414
++# define M_NAND_GPMC_CONFIG6 0x1F0F0A80
++# define M_NAND_GPMC_CONFIG7 0x00000C44
++
++# define STNOR_GPMC_CONFIG1 0x3
++# define STNOR_GPMC_CONFIG2 0x00151501
++# define STNOR_GPMC_CONFIG3 0x00060602
++# define STNOR_GPMC_CONFIG4 0x11091109
++# define STNOR_GPMC_CONFIG5 0x01141F1F
++# define STNOR_GPMC_CONFIG6 0x1F0F04c4
++
++# define SIBNOR_GPMC_CONFIG1 0x1200
++# define SIBNOR_GPMC_CONFIG2 0x001f1f00
++# define SIBNOR_GPMC_CONFIG3 0x00080802
++# define SIBNOR_GPMC_CONFIG4 0x1C091C09
++# define SIBNOR_GPMC_CONFIG5 0x01131F1F
++# define SIBNOR_GPMC_CONFIG6 0x1F0F03C2
++
++# define SDPV2_MPDB_GPMC_CONFIG1 0x00611200
++# define SDPV2_MPDB_GPMC_CONFIG2 0x001F1F01
++# define SDPV2_MPDB_GPMC_CONFIG3 0x00080803
++# define SDPV2_MPDB_GPMC_CONFIG4 0x1D091D09
++# define SDPV2_MPDB_GPMC_CONFIG5 0x041D1F1F
++# define SDPV2_MPDB_GPMC_CONFIG6 0x1D0904C4
++
++# define MPDB_GPMC_CONFIG1 0x00011000
++# define MPDB_GPMC_CONFIG2 0x001f1f01
++# define MPDB_GPMC_CONFIG3 0x00080803
++# define MPDB_GPMC_CONFIG4 0x1c0b1c0a
++# define MPDB_GPMC_CONFIG5 0x041f1F1F
++# define MPDB_GPMC_CONFIG6 0x1F0F04C4
++
++# define LAB_ENET_GPMC_CONFIG1 0x00611000
++# define LAB_ENET_GPMC_CONFIG2 0x001F1F01
++# define LAB_ENET_GPMC_CONFIG3 0x00080803
++# define LAB_ENET_GPMC_CONFIG4 0x1D091D09
++# define LAB_ENET_GPMC_CONFIG5 0x041D1F1F
++# define LAB_ENET_GPMC_CONFIG6 0x1D0904C4
++
++# define P2_GPMC_CONFIG1 0x0
++# define P2_GPMC_CONFIG2 0x0
++# define P2_GPMC_CONFIG3 0x0
++# define P2_GPMC_CONFIG4 0x0
++# define P2_GPMC_CONFIG5 0x0
++# define P2_GPMC_CONFIG6 0x0
++
++# define ONENAND_GPMC_CONFIG1 0x00001200
++# define ONENAND_GPMC_CONFIG2 0x000F0F01
++# define ONENAND_GPMC_CONFIG3 0x00030301
++# define ONENAND_GPMC_CONFIG4 0x0F040F04
++# define ONENAND_GPMC_CONFIG5 0x010F1010
++# define ONENAND_GPMC_CONFIG6 0x1F060000
++
++#endif
++
++/* max number of GPMC Chip Selects */
++#define GPMC_MAX_CS 8
++/* max number of GPMC regs */
++#define GPMC_MAX_REG 7
++
++#define PISMO1_NOR 1
++#define PISMO1_NAND 2
++#define PISMO2_CS0 3
++#define PISMO2_CS1 4
++#define PISMO1_ONENAND 5
++#define DBG_MPDB 6
++#define PISMO2_NAND_CS0 7
++#define PISMO2_NAND_CS1 8
++
++/* make it readable for the gpmc_init */
++#define PISMO1_NOR_BASE FLASH_BASE
++#define PISMO1_NAND_BASE NAND_BASE
++#define PISMO2_CS0_BASE PISMO2_MAP1
++#define PISMO1_ONEN_BASE ONENAND_MAP
++#define DBG_MPDB_BASE DEBUG_BASE
++
++#endif /* endif _OMAP44XX_MEM_H_ */
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/mmc.h x-load-f243938/include/asm/arch-omap4/mmc.h
+--- x-load-f243938.orig/include/asm/arch-omap4/mmc.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/mmc.h 2012-06-07 14:45:39.453648667 -0300
+@@ -0,0 +1,235 @@
++/*
++ * (C) Copyright 2008
++ * Texas Instruments, <www.ti.com>
++ * Syed Mohammed Khasim <khasim@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation's version 2 of
++ * the License.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef MMC_H
++#define MMC_H
++
++#include "mmc_host_def.h"
++
++/* Responses */
++#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
++#define RSP_TYPE_R1 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK)
++#define RSP_TYPE_R1B (RSP_TYPE_LGHT48B | CCCE_CHECK | CICE_CHECK)
++#define RSP_TYPE_R2 (RSP_TYPE_LGHT136 | CCCE_CHECK | CICE_NOCHECK)
++#define RSP_TYPE_R3 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK)
++#define RSP_TYPE_R4 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK)
++#define RSP_TYPE_R5 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK)
++#define RSP_TYPE_R6 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK)
++#define RSP_TYPE_R7 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK)
++
++/* All supported commands */
++#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD1 (INDEX(1) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD2 (INDEX(2) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD3 (INDEX(3) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_SDCMD3 (INDEX(3) | RSP_TYPE_R6 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD4 (INDEX(4) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD6 (INDEX(6) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD7_SELECT (INDEX(7) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD7_DESELECT (INDEX(7) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD8 (INDEX(8) | RSP_TYPE_R1 | DP_DATA | DDIR_READ)
++#define MMC_SDCMD8 (INDEX(8) | RSP_TYPE_R7 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD9 (INDEX(9) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD12 (INDEX(12) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD13 (INDEX(13) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD15 (INDEX(15) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD16 (INDEX(16) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_CMD17 (INDEX(17) | RSP_TYPE_R1 | DP_DATA | DDIR_READ)
++#define MMC_CMD24 (INDEX(24) | RSP_TYPE_R1 | DP_DATA | DDIR_WRITE)
++#define MMC_ACMD6 (INDEX(6) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_ACMD41 (INDEX(41) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE)
++#define MMC_ACMD51 (INDEX(51) | RSP_TYPE_R1 | DP_DATA | DDIR_READ)
++#define MMC_CMD55 (INDEX(55) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
++
++#define MMC_AC_CMD_RCA_MASK (unsigned int)(0xFFFF << 16)
++#define MMC_BC_CMD_DSR_MASK (unsigned int)(0xFFFF << 16)
++#define MMC_DSR_DEFAULT (0x0404)
++#define SD_CMD8_CHECK_PATTERN (0xAA)
++#define SD_CMD8_2_7_3_6_V_RANGE (0x01 << 8)
++
++/* Clock Configurations and Macros */
++
++#define MMC_CLOCK_REFERENCE (96)
++#define MMC_RELATIVE_CARD_ADDRESS (0x1234)
++#define MMC_INIT_SEQ_CLK (MMC_CLOCK_REFERENCE * 1000 / 80)
++#define MMC_400kHz_CLK (MMC_CLOCK_REFERENCE * 1000 / 400)
++#define CLKDR(r, f, u) ((((r)*100) / ((f)*(u))) + 1)
++#define CLKD(f, u) (CLKDR(MMC_CLOCK_REFERENCE, f, u))
++
++#define MMC_OCR_REG_ACCESS_MODE_MASK (0x3 << 29)
++#define MMC_OCR_REG_ACCESS_MODE_BYTE (0x0 << 29)
++#define MMC_OCR_REG_ACCESS_MODE_SECTOR (0x2 << 29)
++
++#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK (0x1 << 30)
++#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE (0x0 << 30)
++#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR (0x1 << 30)
++
++#define MMC_SD2_CSD_C_SIZE_LSB_MASK (0xFFFF)
++#define MMC_SD2_CSD_C_SIZE_MSB_MASK (0x003F)
++#define MMC_SD2_CSD_C_SIZE_MSB_OFFSET (16)
++#define MMC_CSD_C_SIZE_LSB_MASK (0x0003)
++#define MMC_CSD_C_SIZE_MSB_MASK (0x03FF)
++#define MMC_CSD_C_SIZE_MSB_OFFSET (2)
++
++#define MMC_CSD_TRAN_SPEED_UNIT_MASK (0x07 << 0)
++#define MMC_CSD_TRAN_SPEED_FACTOR_MASK (0x0F << 3)
++#define MMC_CSD_TRAN_SPEED_UNIT_100MHZ (0x3 << 0)
++#define MMC_CSD_TRAN_SPEED_FACTOR_1_0 (0x01 << 3)
++#define MMC_CSD_TRAN_SPEED_FACTOR_8_0 (0x0F << 3)
++
++typedef struct {
++ unsigned not_used:1;
++ unsigned crc:7;
++ unsigned ecc:2;
++ unsigned file_format:2;
++ unsigned tmp_write_protect:1;
++ unsigned perm_write_protect:1;
++ unsigned copy:1;
++ unsigned file_format_grp:1;
++ unsigned content_prot_app:1;
++ unsigned reserved_1:4;
++ unsigned write_bl_partial:1;
++ unsigned write_bl_len:4;
++ unsigned r2w_factor:3;
++ unsigned default_ecc:2;
++ unsigned wp_grp_enable:1;
++ unsigned wp_grp_size:5;
++ unsigned erase_grp_mult:5;
++ unsigned erase_grp_size:5;
++ unsigned c_size_mult:3;
++ unsigned vdd_w_curr_max:3;
++ unsigned vdd_w_curr_min:3;
++ unsigned vdd_r_curr_max:3;
++ unsigned vdd_r_curr_min:3;
++ unsigned c_size_lsb:2;
++ unsigned c_size_msb:10;
++ unsigned reserved_2:2;
++ unsigned dsr_imp:1;
++ unsigned read_blk_misalign:1;
++ unsigned write_blk_misalign:1;
++ unsigned read_bl_partial:1;
++ unsigned read_bl_len:4;
++ unsigned ccc:12;
++ unsigned tran_speed:8;
++ unsigned nsac:8;
++ unsigned taac:8;
++ unsigned reserved_3:2;
++ unsigned spec_vers:4;
++ unsigned csd_structure:2;
++} mmc_csd_reg_t;
++
++/* csd for sd2.0 */
++typedef struct {
++ unsigned not_used:1;
++ unsigned crc:7;
++ unsigned reserved_1:2;
++ unsigned file_format:2;
++ unsigned tmp_write_protect:1;
++ unsigned perm_write_protect:1;
++ unsigned copy:1;
++ unsigned file_format_grp:1;
++ unsigned reserved_2:5;
++ unsigned write_bl_partial:1;
++ unsigned write_bl_len:4;
++ unsigned r2w_factor:3;
++ unsigned reserved_3:2;
++ unsigned wp_grp_enable:1;
++ unsigned wp_grp_size:7;
++ unsigned sector_size:7;
++ unsigned erase_blk_len:1;
++ unsigned reserved_4:1;
++ unsigned c_size_lsb:16;
++ unsigned c_size_msb:6;
++ unsigned reserved_5:6;
++ unsigned dsr_imp:1;
++ unsigned read_blk_misalign:1;
++ unsigned write_blk_misalign:1;
++ unsigned read_bl_partial:1;
++ unsigned read_bl_len:4;
++ unsigned ccc:12;
++ unsigned tran_speed:8;
++ unsigned nsac:8;
++ unsigned taac:8;
++ unsigned reserved_6:6;
++ unsigned csd_structure:2;
++} mmc_sd2_csd_reg_t;
++
++/* extended csd - 512 bytes long */
++typedef struct {
++ unsigned char reserved_1[181];
++ unsigned char erasedmemorycontent;
++ unsigned char reserved_2;
++ unsigned char buswidthmode;
++ unsigned char reserved_3;
++ unsigned char highspeedinterfacetiming;
++ unsigned char reserved_4;
++ unsigned char powerclass;
++ unsigned char reserved_5;
++ unsigned char commandsetrevision;
++ unsigned char reserved_6;
++ unsigned char commandset;
++ unsigned char extendedcsdrevision;
++ unsigned char reserved_7;
++ unsigned char csdstructureversion;
++ unsigned char reserved_8;
++ unsigned char cardtype;
++ unsigned char reserved_9[3];
++ unsigned char powerclass_52mhz_1_95v;
++ unsigned char powerclass_26mhz_1_95v;
++ unsigned char powerclass_52mhz_3_6v;
++ unsigned char powerclass_26mhz_3_6v;
++ unsigned char reserved_10;
++ unsigned char minreadperf_4b_26mhz;
++ unsigned char minwriteperf_4b_26mhz;
++ unsigned char minreadperf_8b_26mhz_4b_52mhz;
++ unsigned char minwriteperf_8b_26mhz_4b_52mhz;
++ unsigned char minreadperf_8b_52mhz;
++ unsigned char minwriteperf_8b_52mhz;
++ unsigned char reserved_11;
++ unsigned int sectorcount;
++ unsigned char reserved_12[288];
++ unsigned char supportedcommandsets;
++ unsigned char reserved_13[7];
++} mmc_extended_csd_reg_t;
++
++/* mmc sd responce */
++typedef struct {
++ unsigned int ocr;
++} mmc_resp_r3;
++
++typedef struct {
++ unsigned short cardstatus;
++ unsigned short newpublishedrca;
++} mmc_resp_r6;
++
++extern mmc_card_data mmc_dev;
++
++unsigned char mmc_lowlevel_init(void);
++unsigned char mmc_send_command(unsigned int cmd, unsigned int arg,
++ unsigned int *response);
++unsigned char mmc_setup_clock(unsigned int iclk, unsigned short clkd);
++unsigned char mmc_set_opendrain(unsigned char state);
++unsigned char mmc_read_data(unsigned int *output_buf);
++
++#endif /* MMC_H */
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/mmc_host_def.h x-load-f243938/include/asm/arch-omap4/mmc_host_def.h
+--- x-load-f243938.orig/include/asm/arch-omap4/mmc_host_def.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/mmc_host_def.h 2012-06-07 14:45:39.453648667 -0300
+@@ -0,0 +1,168 @@
++/*
++ * (C) Copyright 2008
++ * Texas Instruments, <www.ti.com>
++ * Syed Mohammed Khasim <khasim@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation's version 2 of
++ * the License.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef MMC_HOST_DEFINITIONS_H
++#define MMC_HOST_DEFINITIONS_H
++
++#define OMAP_HSMMC1_BASE 0x4809C100
++#define OMAP_HSMMC2_BASE 0x480B4100
++
++/*
++ * OMAP HSMMC register definitions
++ */
++
++#define OMAP_HSMMC_SYSCONFIG (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x010))
++#define OMAP_HSMMC_SYSSTATUS (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x014))
++#define OMAP_HSMMC_CON (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x02C))
++#define OMAP_HSMMC_BLK (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x104))
++#define OMAP_HSMMC_ARG (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x108))
++#define OMAP_HSMMC_CMD (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x10C))
++#define OMAP_HSMMC_RSP10 (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x110))
++#define OMAP_HSMMC_RSP32 (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x114))
++#define OMAP_HSMMC_RSP54 (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x118))
++#define OMAP_HSMMC_RSP76 (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x11C))
++#define OMAP_HSMMC_DATA (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x120))
++#define OMAP_HSMMC_PSTATE (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x124))
++#define OMAP_HSMMC_HCTL (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x128))
++#define OMAP_HSMMC_SYSCTL (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x12C))
++#define OMAP_HSMMC_STAT (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x130))
++#define OMAP_HSMMC_IE (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x134))
++#define OMAP_HSMMC_CAPA (*(volatile unsigned int *) (OMAP_HSMMC1_BASE+0x140))
++
++/* T2 Register definitions */
++#define CONTROL_PBIAS_LITE (*(volatile unsigned int *) 0x4A100600)
++#define CONTROL_CONF_MMC1 (*(volatile unsigned int *) 0x4A100628)
++
++/*
++ * OMAP HS MMC Bit definitions
++ */
++#define MMC_SOFTRESET (0x1 << 1)
++#define RESETDONE (0x1 << 0)
++#define NOOPENDRAIN (0x0 << 0)
++#define OPENDRAIN (0x1 << 0)
++#define OD (0x1 << 0)
++#define INIT_NOINIT (0x0 << 1)
++#define INIT_INITSTREAM (0x1 << 1)
++#define HR_NOHOSTRESP (0x0 << 2)
++#define STR_BLOCK (0x0 << 3)
++#define MODE_FUNC (0x0 << 4)
++#define DW8_1_4BITMODE (0x0 << 5)
++#define MIT_CTO (0x0 << 6)
++#define CDP_ACTIVEHIGH (0x0 << 7)
++#define WPP_ACTIVEHIGH (0x0 << 8)
++#define RESERVED_MASK (0x3 << 9)
++#define CTPL_MMC_SD (0x0 << 11)
++#define BLEN_512BYTESLEN (0x200 << 0)
++#define NBLK_STPCNT (0x0 << 16)
++#define DE_DISABLE (0x0 << 0)
++#define BCE_DISABLE (0x0 << 1)
++#define ACEN_DISABLE (0x0 << 2)
++#define DDIR_OFFSET (4)
++#define DDIR_MASK (0x1 << 4)
++#define DDIR_WRITE (0x0 << 4)
++#define DDIR_READ (0x1 << 4)
++#define MSBS_SGLEBLK (0x0 << 5)
++#define RSP_TYPE_OFFSET (16)
++#define RSP_TYPE_MASK (0x3 << 16)
++#define RSP_TYPE_NORSP (0x0 << 16)
++#define RSP_TYPE_LGHT136 (0x1 << 16)
++#define RSP_TYPE_LGHT48 (0x2 << 16)
++#define RSP_TYPE_LGHT48B (0x3 << 16)
++#define CCCE_NOCHECK (0x0 << 19)
++#define CCCE_CHECK (0x1 << 19)
++#define CICE_NOCHECK (0x0 << 20)
++#define CICE_CHECK (0x1 << 20)
++#define DP_OFFSET (21)
++#define DP_MASK (0x1 << 21)
++#define DP_NO_DATA (0x0 << 21)
++#define DP_DATA (0x1 << 21)
++#define CMD_TYPE_NORMAL (0x0 << 22)
++#define INDEX_OFFSET (24)
++#define INDEX_MASK (0x3f << 24)
++#define INDEX(i) (i << 24)
++#define DATI_MASK (0x1 << 1)
++#define DATI_CMDDIS (0x1 << 1)
++#define DTW_1_BITMODE (0x0 << 1)
++#define DTW_4_BITMODE (0x1 << 1)
++#define SDBP_PWROFF (0x0 << 8)
++#define SDBP_PWRON (0x1 << 8)
++#define SDVS_1V8 (0x5 << 9)
++#define SDVS_3V0 (0x6 << 9)
++#define ICE_MASK (0x1 << 0)
++#define ICE_STOP (0x0 << 0)
++#define ICS_MASK (0x1 << 1)
++#define ICS_NOTREADY (0x0 << 1)
++#define ICE_OSCILLATE (0x1 << 0)
++#define CEN_MASK (0x1 << 2)
++#define CEN_DISABLE (0x0 << 2)
++#define CEN_ENABLE (0x1 << 2)
++#define CLKD_OFFSET (6)
++#define CLKD_MASK (0x3FF << 6)
++#define DTO_MASK (0xF << 16)
++#define DTO_15THDTO (0xE << 16)
++#define SOFTRESETALL (0x1 << 24)
++#define CC_MASK (0x1 << 0)
++#define TC_MASK (0x1 << 1)
++#define BWR_MASK (0x1 << 4)
++#define BRR_MASK (0x1 << 5)
++#define ERRI_MASK (0x1 << 15)
++#define IE_CC (0x01 << 0)
++#define IE_TC (0x01 << 1)
++#define IE_BWR (0x01 << 4)
++#define IE_BRR (0x01 << 5)
++#define IE_CTO (0x01 << 16)
++#define IE_CCRC (0x01 << 17)
++#define IE_CEB (0x01 << 18)
++#define IE_CIE (0x01 << 19)
++#define IE_DTO (0x01 << 20)
++#define IE_DCRC (0x01 << 21)
++#define IE_DEB (0x01 << 22)
++#define IE_CERR (0x01 << 28)
++#define IE_BADA (0x01 << 29)
++
++#define VS30_3V0SUP (1 << 25)
++#define VS18_1V8SUP (1 << 26)
++
++/* Driver definitions */
++#define MMCSD_SECTOR_SIZE (512)
++#define MMC_CARD 0
++#define SD_CARD 1
++#define BYTE_MODE 0
++#define SECTOR_MODE 1
++#define CLK_INITSEQ 0
++#define CLK_400KHZ 1
++#define CLK_MISC 2
++
++typedef struct {
++ unsigned int card_type;
++ unsigned int version;
++ unsigned int mode;
++ unsigned int size;
++ unsigned int RCA;
++} mmc_card_data;
++
++#define mmc_reg_out(addr, mask, val) \
++ (addr) = (((addr)) & (~(mask)) ) | ( (val) & (mask));
++
++#endif /* MMC_HOST_DEFINITIONS_H */
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/mux.h x-load-f243938/include/asm/arch-omap4/mux.h
+--- x-load-f243938.orig/include/asm/arch-omap4/mux.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/mux.h 2012-06-07 14:45:39.457648667 -0300
+@@ -0,0 +1,392 @@
++/* Copyright 2009
++ * Texas Instruments, <www.ti.com>
++ * Syed Rafiuddin <rafiuddin.syed@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++#ifndef _OMAP4430_MUX_H_
++#define _OMAP4430_MUX_H_
++
++/*
++ * OFF_PD - Off mode pull type down
++ * OFF_PU - Off mode pull type up
++ * OFF_OUT_PTD - Off Mode Mux low for OUT
++ * OFF_OUT_PTU - Off Mode Mux high for OUT
++ * OFF_IN - Off Mode Mux set to IN
++ * OFF_OUT - Off Mode Mux set to OUT
++ * OFF_EN - Off Mode Mux Enable
++ * IEN - Input Enable
++ * IDIS - Input Disable
++ * PTD - Pull type Down
++ * PTU - Pull type Up
++ * DIS - Pull type selection is inactive
++ * EN - Pull type selection is active
++ * M0 - Mode 0
++ */
++#ifdef CONFIG_OFF_PADCONF
++#define OFF_PD (1 << 12)
++#define OFF_PU (3 << 12)
++#define OFF_OUT_PTD (0 << 10)
++#define OFF_OUT_PTU (2 << 10)
++#define OFF_IN (1 << 10)
++#define OFF_OUT (0 << 10)
++#define OFF_EN (1 << 9)
++#else
++#define OFF_PD (0 << 12)
++#define OFF_PU (0 << 12)
++#define OFF_OUT_PTD (0 << 10)
++#define OFF_OUT_PTU (0 << 10)
++#define OFF_IN (0 << 10)
++#define OFF_OUT (0 << 10)
++#define OFF_EN (0 << 9)
++#endif
++
++#define IEN (1 << 8)
++#define IDIS (0 << 8)
++#define PTU (3 << 3)
++#define PTD (1 << 3)
++#define EN (1 << 3)
++#define DIS (0 << 3)
++
++#define M0 0
++#define M1 1
++#define M2 2
++#define M3 3
++#define M4 4
++#define M5 5
++#define M6 6
++#define M7 7
++
++#ifdef CONFIG_OFF_PADCONF
++#define OFF_IN_PD (OFF_PD | OFF_IN | OFF_EN)
++#define OFF_IN_PU (OFF_PU | OFF_IN | OFF_EN)
++#define OFF_OUT_PD (OFF_OUT_PTD | OFF_OUT | OFF_EN)
++#define OFF_OUT_PU (OFF_OUT_PTU | OFF_OUT | OFF_EN)
++#else
++#define OFF_IN_PD 0
++#define OFF_IN_PU 0
++#define OFF_OUT_PD 0
++#define OFF_OUT_PU 0
++#endif /* #ifdef CONFIG_OFF_PADCONF */
++
++/*
++ * To get the actual address the offset has to added
++ * with OMAP44XX_CTRL_BASE to get the actual address
++ */
++
++/* OMAP4 SPECIFIC PADCONF REGISTERS */
++
++#define CONTROL_PADCONF_CORE_REVISION 0x0000
++#define CONTROL_PADCONF_CORE_HWINFO 0x0004
++#define CONTROL_PADCONF_CORE_SYSCONFIG 0x0010
++#define CONTROL_PADCONF_GPMC_AD0 0x0040
++#define CONTROL_PADCONF_GPMC_AD1 0x0042
++#define CONTROL_PADCONF_GPMC_AD2 0x0044
++#define CONTROL_PADCONF_GPMC_AD3 0x0046
++#define CONTROL_PADCONF_GPMC_AD4 0x0048
++#define CONTROL_PADCONF_GPMC_AD5 0x004A
++#define CONTROL_PADCONF_GPMC_AD6 0x004C
++#define CONTROL_PADCONF_GPMC_AD7 0x004E
++#define CONTROL_PADCONF_GPMC_AD8 0x0050
++#define CONTROL_PADCONF_GPMC_AD9 0x0052
++#define CONTROL_PADCONF_GPMC_AD10 0x0054
++#define CONTROL_PADCONF_GPMC_AD11 0x0056
++#define CONTROL_PADCONF_GPMC_AD12 0x0058
++#define CONTROL_PADCONF_GPMC_AD13 0x005A
++#define CONTROL_PADCONF_GPMC_AD14 0x005C
++#define CONTROL_PADCONF_GPMC_AD15 0x005E
++#define CONTROL_PADCONF_GPMC_A16 0x0060
++#define CONTROL_PADCONF_GPMC_A17 0x0062
++#define CONTROL_PADCONF_GPMC_A18 0x0064
++#define CONTROL_PADCONF_GPMC_A19 0x0066
++#define CONTROL_PADCONF_GPMC_A20 0x0068
++#define CONTROL_PADCONF_GPMC_A21 0x006A
++#define CONTROL_PADCONF_GPMC_A22 0x006C
++#define CONTROL_PADCONF_GPMC_A23 0x006E
++#define CONTROL_PADCONF_GPMC_A24 0x0070
++#define CONTROL_PADCONF_GPMC_A25 0x0072
++#define CONTROL_PADCONF_GPMC_NCS0 0x0074
++#define CONTROL_PADCONF_GPMC_NCS1 0x0076
++#define CONTROL_PADCONF_GPMC_NCS2 0x0078
++#define CONTROL_PADCONF_GPMC_NCS3 0x007A
++#define CONTROL_PADCONF_GPMC_NWP 0x007C
++#define CONTROL_PADCONF_GPMC_CLK 0x007E
++#define CONTROL_PADCONF_GPMC_NADV_ALE 0x0080
++#define CONTROL_PADCONF_GPMC_NOE 0x0082
++#define CONTROL_PADCONF_GPMC_NWE 0x0084
++#define CONTROL_PADCONF_GPMC_NBE0_CLE 0x0086
++#define CONTROL_PADCONF_GPMC_NBE1 0x0088
++#define CONTROL_PADCONF_GPMC_WAIT0 0x008A
++#define CONTROL_PADCONF_GPMC_WAIT1 0x008C
++#define CONTROL_PADCONF_C2C_DATA11 0x008E
++#define CONTROL_PADCONF_C2C_DATA12 0x0090
++#define CONTROL_PADCONF_C2C_DATA13 0x0092
++#define CONTROL_PADCONF_C2C_DATA14 0x0094
++#define CONTROL_PADCONF_C2C_DATA15 0x0096
++#define CONTROL_PADCONF_HDMI_HPD 0x0098
++#define CONTROL_PADCONF_HDMI_CEC 0x009A
++#define CONTROL_PADCONF_HDMI_DDC_SCL 0x009C
++#define CONTROL_PADCONF_HDMI_DDC_SDA 0x009E
++#define CONTROL_PADCONF_CSI21_DX0 0x00A0
++#define CONTROL_PADCONF_CSI21_DY0 0x00A2
++#define CONTROL_PADCONF_CSI21_DX1 0x00A4
++#define CONTROL_PADCONF_CSI21_DY1 0x00A6
++#define CONTROL_PADCONF_CSI21_DX2 0x00A8
++#define CONTROL_PADCONF_CSI21_DY2 0x00AA
++#define CONTROL_PADCONF_CSI21_DX3 0x00AC
++#define CONTROL_PADCONF_CSI21_DY3 0x00AE
++#define CONTROL_PADCONF_CSI21_DX4 0x00B0
++#define CONTROL_PADCONF_CSI21_DY4 0x00B2
++#define CONTROL_PADCONF_CSI22_DX0 0x00B4
++#define CONTROL_PADCONF_CSI22_DY0 0x00B6
++#define CONTROL_PADCONF_CSI22_DX1 0x00B8
++#define CONTROL_PADCONF_CSI22_DY1 0x00BA
++#define CONTROL_PADCONF_CAM_SHUTTER 0x00BC
++#define CONTROL_PADCONF_CAM_STROBE 0x00BE
++#define CONTROL_PADCONF_CAM_GLOBALRESET 0x00C0
++#define CONTROL_PADCONF_USBB1_ULPITLL_CLK 0x00C2
++#define CONTROL_PADCONF_USBB1_ULPITLL_STP 0x00C4
++#define CONTROL_PADCONF_USBB1_ULPITLL_DIR 0x00C6
++#define CONTROL_PADCONF_USBB1_ULPITLL_NXT 0x00C8
++#define CONTROL_PADCONF_USBB1_ULPITLL_DAT0 0x00CA
++#define CONTROL_PADCONF_USBB1_ULPITLL_DAT1 0x00CC
++#define CONTROL_PADCONF_USBB1_ULPITLL_DAT2 0x00CE
++#define CONTROL_PADCONF_USBB1_ULPITLL_DAT3 0x00D0
++#define CONTROL_PADCONF_USBB1_ULPITLL_DAT4 0x00D2
++#define CONTROL_PADCONF_USBB1_ULPITLL_DAT5 0x00D4
++#define CONTROL_PADCONF_USBB1_ULPITLL_DAT6 0x00D6
++#define CONTROL_PADCONF_USBB1_ULPITLL_DAT7 0x00D8
++#define CONTROL_PADCONF_USBB1_HSIC_DATA 0x00DA
++#define CONTROL_PADCONF_USBB1_HSIC_STROBE 0x00DC
++#define CONTROL_PADCONF_USBC1_ICUSB_DP 0x00DE
++#define CONTROL_PADCONF_USBC1_ICUSB_DM 0x00E0
++#define CONTROL_PADCONF_SDMMC1_CLK 0x00E2
++#define CONTROL_PADCONF_SDMMC1_CMD 0x00E4
++#define CONTROL_PADCONF_SDMMC1_DAT0 0x00E6
++#define CONTROL_PADCONF_SDMMC1_DAT1 0x00E8
++#define CONTROL_PADCONF_SDMMC1_DAT2 0x00EA
++#define CONTROL_PADCONF_SDMMC1_DAT3 0x00EC
++#define CONTROL_PADCONF_SDMMC1_DAT4 0x00EE
++#define CONTROL_PADCONF_SDMMC1_DAT5 0x00F0
++#define CONTROL_PADCONF_SDMMC1_DAT6 0x00F2
++#define CONTROL_PADCONF_SDMMC1_DAT7 0x00F4
++#define CONTROL_PADCONF_ABE_MCBSP2_CLKX 0x00F6
++#define CONTROL_PADCONF_ABE_MCBSP2_DR 0x00F8
++#define CONTROL_PADCONF_ABE_MCBSP2_DX 0x00FA
++#define CONTROL_PADCONF_ABE_MCBSP2_FSX 0x00FC
++#define CONTROL_PADCONF_ABE_MCBSP1_CLKX 0x00FE
++#define CONTROL_PADCONF_ABE_MCBSP1_DR 0x0100
++#define CONTROL_PADCONF_ABE_MCBSP1_DX 0x0102
++#define CONTROL_PADCONF_ABE_MCBSP1_FSX 0x0104
++#define CONTROL_PADCONF_ABE_PDM_UL_DATA 0x0106
++#define CONTROL_PADCONF_ABE_PDM_DL_DATA 0x0108
++#define CONTROL_PADCONF_ABE_PDM_FRAME 0x010A
++#define CONTROL_PADCONF_ABE_PDM_LB_CLK 0x010C
++#define CONTROL_PADCONF_ABE_CLKS 0x010E
++#define CONTROL_PADCONF_ABE_DMIC_CLK1 0x0110
++#define CONTROL_PADCONF_ABE_DMIC_DIN1 0x0112
++#define CONTROL_PADCONF_ABE_DMIC_DIN2 0x0114
++#define CONTROL_PADCONF_ABE_DMIC_DIN3 0x0116
++#define CONTROL_PADCONF_UART2_CTS 0x0118
++#define CONTROL_PADCONF_UART2_RTS 0x011A
++#define CONTROL_PADCONF_UART2_RX 0x011C
++#define CONTROL_PADCONF_UART2_TX 0x011E
++#define CONTROL_PADCONF_HDQ_SIO 0x0120
++#define CONTROL_PADCONF_I2C1_SCL 0x0122
++#define CONTROL_PADCONF_I2C1_SDA 0x0124
++#define CONTROL_PADCONF_I2C2_SCL 0x0126
++#define CONTROL_PADCONF_I2C2_SDA 0x0128
++#define CONTROL_PADCONF_I2C3_SCL 0x012A
++#define CONTROL_PADCONF_I2C3_SDA 0x012C
++#define CONTROL_PADCONF_I2C4_SCL 0x012E
++#define CONTROL_PADCONF_I2C4_SDA 0x0130
++#define CONTROL_PADCONF_MCSPI1_CLK 0x0132
++#define CONTROL_PADCONF_MCSPI1_SOMI 0x0134
++#define CONTROL_PADCONF_MCSPI1_SIMO 0x0136
++#define CONTROL_PADCONF_MCSPI1_CS0 0x0138
++#define CONTROL_PADCONF_MCSPI1_CS1 0x013A
++#define CONTROL_PADCONF_MCSPI1_CS2 0x013C
++#define CONTROL_PADCONF_MCSPI1_CS3 0x013E
++#define CONTROL_PADCONF_UART3_CTS_RCTX 0x0140
++#define CONTROL_PADCONF_UART3_RTS_SD 0x0142
++#define CONTROL_PADCONF_UART3_RX_IRRX 0x0144
++#define CONTROL_PADCONF_UART3_TX_IRTX 0x0146
++#define CONTROL_PADCONF_SDMMC5_CLK 0x0148
++#define CONTROL_PADCONF_SDMMC5_CMD 0x014A
++#define CONTROL_PADCONF_SDMMC5_DAT0 0x014C
++#define CONTROL_PADCONF_SDMMC5_DAT1 0x014E
++#define CONTROL_PADCONF_SDMMC5_DAT2 0x0150
++#define CONTROL_PADCONF_SDMMC5_DAT3 0x0152
++#define CONTROL_PADCONF_MCSPI4_CLK 0x0154
++#define CONTROL_PADCONF_MCSPI4_SIMO 0x0156
++#define CONTROL_PADCONF_MCSPI4_SOMI 0x0158
++#define CONTROL_PADCONF_MCSPI4_CS0 0x015A
++#define CONTROL_PADCONF_UART4_RX 0x015C
++#define CONTROL_PADCONF_UART4_TX 0x015E
++#define CONTROL_PADCONF_USBB2_ULPITLL_CLK 0x0160
++#define CONTROL_PADCONF_USBB2_ULPITLL_STP 0x0162
++#define CONTROL_PADCONF_USBB2_ULPITLL_DIR 0x0164
++#define CONTROL_PADCONF_USBB2_ULPITLL_NXT 0x0166
++#define CONTROL_PADCONF_USBB2_ULPITLL_DAT0 0x0168
++#define CONTROL_PADCONF_USBB2_ULPITLL_DAT1 0x016A
++#define CONTROL_PADCONF_USBB2_ULPITLL_DAT2 0x016C
++#define CONTROL_PADCONF_USBB2_ULPITLL_DAT3 0x016E
++#define CONTROL_PADCONF_USBB2_ULPITLL_DAT4 0x0170
++#define CONTROL_PADCONF_USBB2_ULPITLL_DAT5 0x0172
++#define CONTROL_PADCONF_USBB2_ULPITLL_DAT6 0x0174
++#define CONTROL_PADCONF_USBB2_ULPITLL_DAT7 0x0176
++#define CONTROL_PADCONF_USBB2_HSIC_DATA 0x0178
++#define CONTROL_PADCONF_USBB2_HSIC_STROBE 0x017A
++#define CONTROL_PADCONF_UNIPRO_TX0 0x017C
++#define CONTROL_PADCONF_UNIPRO_TY0 0x017E
++#define CONTROL_PADCONF_UNIPRO_TX1 0x0180
++#define CONTROL_PADCONF_UNIPRO_TY1 0x0182
++#define CONTROL_PADCONF_UNIPRO_TX2 0x0184
++#define CONTROL_PADCONF_UNIPRO_TY2 0x0186
++#define CONTROL_PADCONF_UNIPRO_RX0 0x0188
++#define CONTROL_PADCONF_UNIPRO_RY0 0x018A
++#define CONTROL_PADCONF_UNIPRO_RX1 0x018C
++#define CONTROL_PADCONF_UNIPRO_RY1 0x018E
++#define CONTROL_PADCONF_UNIPRO_RX2 0x0190
++#define CONTROL_PADCONF_UNIPRO_RY2 0x0192
++#define CONTROL_PADCONF_USBA0_OTG_CE 0x0194
++#define CONTROL_PADCONF_USBA0_OTG_DP 0x0196
++#define CONTROL_PADCONF_USBA0_OTG_DM 0x0198
++#define CONTROL_PADCONF_FREF_CLK1_OUT 0x019A
++#define CONTROL_PADCONF_FREF_CLK2_OUT 0x019C
++#define CONTROL_PADCONF_SYS_NIRQ1 0x019E
++#define CONTROL_PADCONF_SYS_NIRQ2 0x01A0
++#define CONTROL_PADCONF_SYS_BOOT0 0x01A2
++#define CONTROL_PADCONF_SYS_BOOT1 0x01A4
++#define CONTROL_PADCONF_SYS_BOOT2 0x01A6
++#define CONTROL_PADCONF_SYS_BOOT3 0x01A8
++#define CONTROL_PADCONF_SYS_BOOT4 0x01AA
++#define CONTROL_PADCONF_SYS_BOOT5 0x01AC
++#define CONTROL_PADCONF_DPM_EMU0 0x01AE
++#define CONTROL_PADCONF_DPM_EMU1 0x01B0
++#define CONTROL_PADCONF_DPM_EMU2 0x01B2
++#define CONTROL_PADCONF_DPM_EMU3 0x01B4
++#define CONTROL_PADCONF_DPM_EMU4 0x01B6
++#define CONTROL_PADCONF_DPM_EMU5 0x01B8
++#define CONTROL_PADCONF_DPM_EMU6 0x01BA
++#define CONTROL_PADCONF_DPM_EMU7 0x01BC
++#define CONTROL_PADCONF_DPM_EMU8 0x01BE
++#define CONTROL_PADCONF_DPM_EMU9 0x01C0
++#define CONTROL_PADCONF_DPM_EMU10 0x01C2
++#define CONTROL_PADCONF_DPM_EMU11 0x01C4
++#define CONTROL_PADCONF_DPM_EMU12 0x01C6
++#define CONTROL_PADCONF_DPM_EMU13 0x01C8
++#define CONTROL_PADCONF_DPM_EMU14 0x01CA
++#define CONTROL_PADCONF_DPM_EMU15 0x01CC
++#define CONTROL_PADCONF_DPM_EMU16 0x01CE
++#define CONTROL_PADCONF_DPM_EMU17 0x01D0
++#define CONTROL_PADCONF_DPM_EMU18 0x01D2
++#define CONTROL_PADCONF_DPM_EMU19 0x01D4
++#define CONTROL_PADCONF_WAKEUPEVENT_0 0x01D8
++#define CONTROL_PADCONF_WAKEUPEVENT_1 0x01DC
++#define CONTROL_PADCONF_WAKEUPEVENT_2 0x01E0
++#define CONTROL_PADCONF_WAKEUPEVENT_3 0x01E4
++#define CONTROL_PADCONF_WAKEUPEVENT_4 0x01E8
++#define CONTROL_PADCONF_WAKEUPEVENT_5 0x01EC
++#define CONTROL_PADCONF_WAKEUPEVENT_6 0x01F0
++
++#define CONTROL_PADCONF_GLOBAL 0x05A2
++#define CONTROL_PADCONF_MODE 0x05A4
++#define CONTROL_SMART1IO_PADCONF_0 0x05A8
++#define CONTROL_SMART1IO_PADCONF_1 0x05AC
++#define CONTROL_SMART2IO_PADCONF_0 0x05B0
++#define CONTROL_SMART2IO_PADCONF_1 0x05B4
++#define CONTROL_SMART3IO_PADCONF_0 0x05B8
++#define CONTROL_SMART3IO_PADCONF_1 0x05BC
++#define CONTROL_SMART3IO_PADCONF_2 0x05C0
++#define CONTROL_USBB_HSIC 0x05C4
++#define CONTROL_SLIMBUS 0x05C8
++#define CONTROL_PBIASLITE 0x0600
++#define CONTROL_I2C_0 0x0604
++#define CONTROL_CAMERA_RX 0x0608
++#define CONTROL_AVDAC 0x060C
++#define CONTROL_HDMI_TX_PHY 0x0610
++#define CONTROL_MMC2 0x0614
++#define CONTROL_DSIPHY 0x0618
++#define CONTROL_MCBSPLP 0x061C
++#define CONTROL_USB2PHYCORE 0x0620
++#define CONTROL_I2C_1 0x0624
++#define CONTROL_MMC1 0x0628
++#define CONTROL_HSI 0x062C
++#define CONTROL_USB 0x0630
++#define CONTROL_HDQ 0x0634
++#define CONTROL_LPDDR2IO1_0 0x0638
++#define CONTROL_LPDDR2IO1_1 0x063C
++#define CONTROL_LPDDR2IO1_2 0x0640
++#define CONTROL_LPDDR2IO1_3 0x0644
++#define CONTROL_LPDDR2IO2_0 0x0648
++#define CONTROL_LPDDR2IO2_1 0x064C
++#define CONTROL_LPDDR2IO2_2 0x0650
++#define CONTROL_LPDDR2IO2_3 0x0654
++#define CONTROL_BUS_HOLD 0x0658
++#define CONTROL_C2C 0x065C
++#define CONTROL_CORE_CONTROL_SPARE_RW 0x0660
++#define CONTROL_CORE_CONTROL_SPARE_R 0x0664
++#define CONTROL_CORE_CONTROL_SPARE_R_C0 0x0668
++#define CONTROL_EFUSE_1 0x0700
++#define CONTROL_EFUSE_2 0x0704
++#define CONTROL_EFUSE_3 0x0708
++#define CONTROL_EFUSE_4 0x070C
++
++#define CONTROL_PADCONF_WKUP_REVISION 0x0000
++#define CONTROL_PADCONF_WKUP_HWINFO 0x0004
++#define CONTROL_PADCONF_WKUP_SYSCONFIG 0x0010
++#define CONTROL_WKUP_PAD0_SIM_IO 0x0040
++#define CONTROL_WKUP_PAD1_SIM_CLK 0x0042
++#define CONTROL_WKUP_PAD0_SIM_RESET 0x0044
++#define CONTROL_WKUP_PAD1_SIM_CD 0x0046
++#define CONTROL_WKUP_PAD0_SIM_PWRCTRL 0x0048
++#define CONTROL_WKUP_PAD1_SR_SCL 0x004A
++#define CONTROL_WKUP_PAD0_SR_SDA 0x004C
++#define CONTROL_WKUP_PAD1_FREF_XTAL_IN 0x004E
++#define CONTROL_WKUP_PAD0_FREF_SLICER_IN 0x0050
++#define CONTROL_WKUP_PAD1_FREF_CLK_IOREQ 0x0052
++#define CONTROL_WKUP_PAD0_FREF_CLK0_OUT 0x0054
++#define CONTROL_WKUP_PAD1_FREF_CLK3_REQ 0x0056
++#define CONTROL_WKUP_PAD0_FREF_CLK3_OUT 0x0058
++#define CONTROL_WKUP_PAD1_FREF_CLK4_REQ 0x005A
++#define CONTROL_WKUP_PAD0_FREF_CLK4_OUT 0x005C
++#define CONTROL_WKUP_PAD1_SYS_32K 0x005E
++#define CONTROL_WKUP_PAD0_SYS_NRESPWRON 0x0060
++#define CONTROL_WKUP_PAD1_SYS_NRESWARM 0x0062
++#define CONTROL_WKUP_PAD0_SYS_PWR_REQ 0x0064
++#define CONTROL_WKUP_PAD1_SYS_PWRON_RESET 0x0066
++#define CONTROL_WKUP_PAD0_SYS_BOOT6 0x0068
++#define CONTROL_WKUP_PAD1_SYS_BOOT7 0x006A
++#define CONTROL_WKUP_PAD0_JTAG_NTRST 0x006C
++#define CONTROL_WKUP_PAD1_JTAG_TCK 0x006D
++#define CONTROL_WKUP_PAD0_JTAG_RTCK 0x0070
++#define CONTROL_WKUP_PAD1_JTAG_TMS_TMSC 0x0072
++#define CONTROL_WKUP_PAD0_JTAG_TDI 0x0074
++#define CONTROL_WKUP_PAD1_JTAG_TDO 0x0076
++#define CONTROL_PADCONF_WAKEUPEVENT_0 0x007C
++#define CONTROL_SMART1NOPMIO_PADCONF_0 0x05A0
++#define CONTROL_SMART1NOPMIO_PADCONF_1 0x05A4
++#define CONTROL_PADCONF_MODE 0x05A8
++#define CONTROL_XTAL_OSCILLATOR 0x05AC
++#define CONTROL_CONTROL_I2C_2 0x0604
++#define CONTROL_CONTROL_JTAG 0x0608
++#define CONTROL_CONTROL_SYS 0x060C
++#define CONTROL_WKUP_CONTROL_SPARE_RW 0x0614
++#define CONTROL_WKUP_CONTROL_SPARE_R 0x0618
++#define CONTROL_WKUP_CONTROL_SPARE_R_C0 0x061C
++
++#endif
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/omap4430.h x-load-f243938/include/asm/arch-omap4/omap4430.h
+--- x-load-f243938.orig/include/asm/arch-omap4/omap4430.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/omap4430.h 2012-06-07 14:45:39.457648667 -0300
+@@ -0,0 +1,137 @@
++/*
++ * (C) Copyright 2006-2009
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ * Syed Mohammed Khasim <x0khasim@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef _OMAP4430_SYS_H_
++#define _OMAP4430_SYS_H_
++
++#include <asm/arch/sizes.h>
++
++/*
++ * 4430 specific Section
++ */
++
++/* Stuff on L3 Interconnect */
++#define SMX_APE_BASE 0x68000000
++
++/* L3 Firewall */
++#define A_REQINFOPERM0 (SMX_APE_BASE + 0x05048)
++#define A_READPERM0 (SMX_APE_BASE + 0x05050)
++#define A_WRITEPERM0 (SMX_APE_BASE + 0x05058)
++
++/* GPMC */
++#define OMAP44XX_GPMC_BASE (0x50000000)
++
++/* DMM */
++#define OMAP44XX_DMM_BASE 0x4E000000
++
++/* SMS */
++#define OMAP44XX_SMS_BASE 0x6C000000
++
++/* SDRC */
++#define OMAP44XX_SDRC_BASE 0x6D000000
++
++
++/*
++ * L4 Peripherals - L4 Wakeup and L4 Core now
++ */
++#define OMAP44XX_CORE_L4_IO_BASE 0x4A000000
++
++#define OMAP44XX_WAKEUP_L4_IO_BASE 0x4A300000
++
++#define OMAP44XX_L4_PER 0x48000000
++
++#define OMAP44XX_L4_IO_BASE OMAP44XX_CORE_L4_IO_BASE
++
++/* CONTROL */
++//#define OMAP44XX_CTRL_BASE (OMAP44XX_L4_IO_BASE+0x2000)
++#define OMAP44XX_CTRL_BASE 0x4a100000
++
++/* TAP information dont know for 3430*/
++#define OMAP44XX_TAP_BASE (0x49000000) /*giving some junk for virtio */
++
++/* UART */
++#define OMAP44XX_UART1 (OMAP44XX_L4_PER+0x6a000)
++#define OMAP44XX_UART2 (OMAP44XX_L4_PER+0x6c000)
++#define OMAP44XX_UART3 (OMAP44XX_L4_PER+0x20000)
++
++/* General Purpose Timers */
++#define OMAP44XX_GPT1 0x48318000
++#define OMAP44XX_GPT2 0x48032000
++#define OMAP44XX_GPT3 0x48034000
++#define OMAP44XX_GPT4 0x48036000
++#define OMAP44XX_GPT5 0x40138000
++#define OMAP44XX_GPT6 0x4013A000
++#define OMAP44XX_GPT7 0x4013C000
++#define OMAP44XX_GPT8 0x4013E000
++#define OMAP44XX_GPT9 0x48040000
++#define OMAP44XX_GPT10 0x48086000
++#define OMAP44XX_GPT11 0x48088000
++#define OMAP44XX_GPT12 0x48304000
++
++/* WatchDog Timers (1 secure, 3 GP) */
++#define WD1_BASE (0x4A322000)
++#define WD2_BASE (0x4A314000)
++#define WD3_BASE (0x40130000)
++
++/* 32KTIMER */
++#define SYNC_32KTIMER_BASE (0x48320000)
++#define S32K_CR (SYNC_32KTIMER_BASE+0x10)
++
++/*
++ * SDP4430 specific Section
++ */
++
++/*
++ * The 443x's chip selects are programmable. The mask ROM
++ * does configure CS0 to 0x08000000 before dispatch. So, if
++ * you want your code to live below that address, you have to
++ * be prepared to jump though hoops, to reset the base address.
++ * Same as in SDP4430
++ */
++#ifdef CONFIG_OMAP44XX
++/* base address for indirect vectors (internal boot mode) */
++#define SRAM_OFFSET0 0x40000000
++#define SRAM_OFFSET1 0x00300000
++#define SRAM_OFFSET2 0x0000D000
++#define SRAM_OFFSET3 0x00000800
++#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2|SRAM_OFFSET3)
++#define LOW_LEVEL_SRAM_STACK 0x4030DFFC
++#endif
++
++#if defined(CONFIG_4430SDP)
++/* FPGA on Debug board.*/
++# define ETH_CONTROL_REG (DEBUG_BASE+0x30b)
++# define LAN_RESET_REGISTER (DEBUG_BASE+0x1c)
++
++# define DIP_SWITCH_INPUT_REG2 (DEBUG_BASE+0x60)
++# define LED_REGISTER (DEBUG_BASE+0x40)
++# define FPGA_REV_REGISTER (DEBUG_BASE+0x10)
++# define EEPROM_MAIN_BRD (DEBUG_BASE+0x10000+0x1800)
++# define EEPROM_CONN_BRD (DEBUG_BASE+0x10000+0x1900)
++# define EEPROM_UI_BRD (DEBUG_BASE+0x10000+0x1A00)
++# define EEPROM_MCAM_BRD (DEBUG_BASE+0x10000+0x1B00)
++# define ENHANCED_UI_EE_NAME "750-2075"
++#endif
++
++#endif /* _OMAP4430_SYS_H_ */
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/rev.h x-load-f243938/include/asm/arch-omap4/rev.h
+--- x-load-f243938.orig/include/asm/arch-omap4/rev.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/rev.h 2012-06-07 14:45:39.457648667 -0300
+@@ -0,0 +1,41 @@
++/*
++ * (C) Copyright 2006-2009
++ * Texas Instruments, <www.ti.com>
++ *
++ * Richard Woodruff <r-woodruff2@ti.com>
++ * Syed Mohammed Khasim <x0khasim@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef _OMAP44XX_REV_H_
++#define _OMAP44XX_REV_H_
++
++#define CDB_DDR_COMBO /* combo part on cpu daughter card */
++#define CDB_DDR_IPDB /* 2x16 parts on daughter card */
++
++#define DDR_100 100 /* type found on most mem d-boards */
++#define DDR_111 111 /* some combo parts */
++#define DDR_133 133 /* most combo, some mem d-boards */
++#define DDR_165 165 /* future parts */
++
++#define CPU_4430 0x4430
++
++#define CPU_4430_ES1 1
++
++#endif
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/sizes.h x-load-f243938/include/asm/arch-omap4/sizes.h
+--- x-load-f243938.orig/include/asm/arch-omap4/sizes.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/sizes.h 2012-06-07 14:45:39.457648667 -0300
+@@ -0,0 +1,48 @@
++/*
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++/* Size defintions
++ * Copyright (C) ARM Limited 1998. All rights reserved.
++ */
++
++#ifndef __sizes_h
++#define __sizes_h 1
++
++/* handy sizes */
++#define SZ_1K 0x00000400
++#define SZ_4K 0x00001000
++#define SZ_8K 0x00002000
++#define SZ_16K 0x00004000
++#define SZ_32K 0x00008000
++#define SZ_64K 0x00010000
++#define SZ_128K 0x00020000
++#define SZ_256K 0x00040000
++#define SZ_512K 0x00080000
++
++#define SZ_1M 0x00100000
++#define SZ_2M 0x00200000
++#define SZ_4M 0x00400000
++#define SZ_8M 0x00800000
++#define SZ_16M 0x01000000
++#define SZ_31M 0x01F00000
++#define SZ_32M 0x02000000
++#define SZ_64M 0x04000000
++#define SZ_128M 0x08000000
++#define SZ_256M 0x10000000
++#define SZ_512M 0x20000000
++
++#define SZ_1G 0x40000000
++#define SZ_2G 0x80000000
++
++#endif /* __sizes_h */
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/sys_info.h x-load-f243938/include/asm/arch-omap4/sys_info.h
+--- x-load-f243938.orig/include/asm/arch-omap4/sys_info.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/sys_info.h 2012-06-07 14:45:39.457648667 -0300
+@@ -0,0 +1,75 @@
++/*
++ * (C) Copyright 2006-2009
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef _OMAP44XX_SYS_INFO_H_
++#define _OMAP44XX_SYS_INFO_H_
++
++#define XDR_POP 5 /* package on package part */
++#define SDR_DISCRETE 4 /* 128M memory SDR module*/
++#define DDR_STACKED 3 /* stacked part on 2422 */
++#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */
++#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */
++
++#define DDR_100 100 /* type found on most mem d-boards */
++#define DDR_111 111 /* some combo parts */
++#define DDR_133 133 /* most combo, some mem d-boards */
++#define DDR_165 165 /* future parts */
++
++#define CPU_4430 0x4430
++
++/* 343x real hardware:
++ * ES1 = rev 0
++ */
++
++/* 343x code defines:
++ * ES1 = 0+1 = 1
++ * ES1 = 1+1 = 1
++ */
++#define CPU_4430_ES1 1
++
++/* Currently Virtio models this one */
++#define CPU_4430_CHIPID 0x0B68A000
++
++#define GPMC_MUXED 1
++#define GPMC_NONMUXED 0
++
++#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */
++#define TYPE_NOR 0x000
++#define TYPE_ONENAND 0x800
++
++#define WIDTH_8BIT 0x0000
++#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
++
++#define I2C_MENELAUS 0x72 /* i2c id for companion chip */
++#define I2C_TRITON2 0x4B /* addres of power group */
++
++#define BOOT_FAST_XIP 0x1f
++
++/* SDP definitions according to FPGA Rev. Is this OK?? */
++#define SDP_4430_VIRTIO 0x1
++#define SDP_4430_V1 0x2
++
++#define BOARD_4430_LABRADOR 0x80
++#define BOARD_4430_LABRADOR_V1 0x1
++
++#endif
+diff -uNr x-load-f243938.orig/include/asm/arch-omap4/sys_proto.h x-load-f243938/include/asm/arch-omap4/sys_proto.h
+--- x-load-f243938.orig/include/asm/arch-omap4/sys_proto.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/asm/arch-omap4/sys_proto.h 2012-06-07 14:45:39.457648667 -0300
+@@ -0,0 +1,60 @@
++/*
++ * (C) Copyright 2004-2009
++ * Texas Instruments, <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++#ifndef _OMAP44XX_SYS_PROTO_H_
++#define _OMAP44XX_SYS_PROTO_H_
++
++void prcm_init(void);
++void per_clocks_enable(void);
++void configure_core_dpll_no_lock(void);
++void lock_core_dpll(void);
++void lock_core_dpll_shadow(void);
++
++void memif_init(void);
++void sdrc_init(void);
++void do_sdrc_init(u32, u32);
++void gpmc_init(void);
++
++void ether_init(void);
++void watchdog_init(void);
++void set_muxconf_regs(void);
++
++u32 get_cpu_type(void);
++u32 get_cpu_rev(void);
++u32 get_mem_type(void);
++u32 get_sysboot_value(void);
++u32 get_gpmc0_base(void);
++u32 is_gpmc_muxed(void);
++u32 get_gpmc0_type(void);
++u32 get_gpmc0_width(void);
++u32 get_board_type(void);
++void display_board_info(u32);
++void update_mux(u32, u32);
++u32 get_sdr_cs_size(u32 offset);
++u32 running_in_sdram(void);
++u32 running_in_sram(void);
++u32 running_in_flash(void);
++u32 running_from_internal_boot(void);
++u32 get_device_type(void);
++
++void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value);
++u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound);
++void sdelay(unsigned long loops);
++
++#endif
+diff -uNr x-load-f243938.orig/include/configs/omap3530beagle.h x-load-f243938/include/configs/omap3530beagle.h
+--- x-load-f243938.orig/include/configs/omap3530beagle.h 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/include/configs/omap3530beagle.h 2012-06-07 15:17:38.625692457 -0300
+@@ -28,8 +28,8 @@
+ #define __CONFIG_H
+
+ /* serial printf facility takes about 3.5K */
+-#define CFG_PRINTF
+-//#undef CFG_PRINTF
++//#define CFG_PRINTF
++#undef CFG_PRINTF
+
+ /*
+ * High Level Configuration Options
+diff -uNr x-load-f243938.orig/include/configs/omap4430panda.h x-load-f243938/include/configs/omap4430panda.h
+--- x-load-f243938.orig/include/configs/omap4430panda.h 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/include/configs/omap4430panda.h 2012-06-07 14:45:39.457648667 -0300
+@@ -0,0 +1,106 @@
++/*
++ * (C) Copyright 2006
++ * Texas Instruments <www.ti.com>
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * X-Loader Configuation settings for the TI OMAP SDP3430 board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/* serial printf facility takes about 3.5K */
++#define CFG_PRINTF
++//#undef CFG_PRINTF
++
++/*
++ * High Level Configuration Options
++ */
++#define CONFIG_ARMCORTEXA9 1 /* This is an ARM V7 CPU core */
++#define CONFIG_OMAP 1 /* in a TI OMAP core */
++#define CONFIG_OMAP44XX 1 /* which is a 34XX */
++#define CONFIG_OMAP4430 1 /* which is in a 3430 */
++#define CONFIG_4430PANDA 1 /* working with SDP */
++
++/* Keep Default @ 33MHz at boot loader level
++ * On Phoenix board vlotage needs to be bumped up
++ * before scaling the MPU up
++ */
++#define CONFIG_MPU_600 1
++#define CORE_190MHZ 1
++/* Enable the below macro if MMC boot support is required */
++#define CONFIG_MMC 1
++#if defined(CONFIG_MMC)
++ /* To Enable MMC boot for OMAP4430 Panda */
++ //#define CONFIG_MMC1 1
++ /* To Enable EMMC boot for OMAP4430 Panda */
++ #define CONFIG_MMC2 1
++ #define CFG_CMD_MMC 1
++ #define CFG_CMD_FAT 1
++#endif
++
++#include <asm/arch/cpu.h> /* get chip and board defs */
++
++/* uncomment it if you need timer based udelay(). it takes about 250 bytes */
++//#define CFG_UDELAY
++
++/* Clock Defines */
++#define V_OSCK 19200000 /* Clock output from T2 */
++#define V_SCLK V_OSCK
++
++/* Memory type */
++#define CFG_4430SDRAM_DDR 1
++
++#ifdef CFG_PRINTF
++
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++#define CFG_NS16550_REG_SIZE (-4)
++#define CFG_NS16550_CLK (48000000)
++#define CFG_NS16550_COM3 OMAP44XX_UART3
++
++/*
++ * select serial console configuration
++ */
++#define CONFIG_SERIAL1 1 /* UART1 on 3430SDP */
++#define CONFIG_CONS_INDEX 3
++
++#define CONFIG_BAUDRATE 115200
++#define CFG_PBSIZE 256
++
++#endif /* CFG_PRINTF */
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LOADADDR 0x80e80000
++
++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
++#define CFG_ENV_SIZE 0x100
++/*-----------------------------------------------------------------------
++ * Stack sizes
++ *
++ * The stack sizes are set up in start.S using the settings below
++ */
++#define CONFIG_STACKSIZE (128*1024) /* regular stack */
++
++#endif /* __CONFIG_H */
++
+diff -uNr x-load-f243938.orig/lib/board.c x-load-f243938/lib/board.c
+--- x-load-f243938.orig/lib/board.c 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/lib/board.c 2012-06-07 14:45:39.457648667 -0300
+@@ -49,8 +49,10 @@
+ static int init_func_i2c (void)
+ {
+ #ifdef CONFIG_MMC
++#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ #endif
++#endif
+ return 0;
+ }
+
+@@ -65,8 +67,10 @@
+ print_info,
+ nand_init, /* board specific nand init */
+ #ifdef CONFIG_MMC
++#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ init_func_i2c,
+ #endif
++#endif
+ NULL,
+ };
+
+@@ -87,6 +91,7 @@
+ misc_init_r();
+
+ buf = (uchar*) CFG_LOADADDR;
++ *(int *)buf = 0xffffffff;
+
+ #ifdef CONFIG_MMC
+ /* first try mmc */
+@@ -104,6 +109,7 @@
+ if (buf == (uchar *)CFG_LOADADDR) {
+ /* if no u-boot on mmc, try onenand or nand, depending upon sysboot */
+ if (get_mem_type() == GPMC_ONENAND){
++#ifdef CFG_ONENAND
+ #ifdef CFG_PRINTF
+ printf("Loading u-boot.bin from onenand\n");
+ #endif
+@@ -111,7 +117,9 @@
+ if (!onenand_read_block(buf, i))
+ buf += ONENAND_BLOCK_SIZE;
+ }
++#endif
+ } else if (get_mem_type() == GPMC_NAND){
++#ifdef CFG_NAND_K9F1G08R0A
+ #ifdef CFG_PRINTF
+ printf("Loading u-boot.bin from nand\n");
+ #endif
+@@ -119,6 +127,7 @@
+ if (!nand_read_block(buf, i))
+ buf += NAND_BLOCK_SIZE; /* advance buf ptr */
+ }
++#endif
+ }
+ }
+
+diff -uNr x-load-f243938.orig/Makefile x-load-f243938/Makefile
+--- x-load-f243938.orig/Makefile 2010-08-03 18:08:38.000000000 -0300
++++ x-load-f243938/Makefile 2012-06-07 14:45:39.437648667 -0300
+@@ -84,6 +84,12 @@
+
+ all: $(ALL)
+
++ift: $(ALL) x-load.bin.ift
++
++x-load.bin.ift: signGP System.map x-load.bin
++ TEXT_BASE=`grep -w _start System.map|cut -d ' ' -f1`
++ ./signGP x-load.bin $(TEXT_BASE)
++ cp x-load.bin.ift MLO
+
+ x-load.bin: x-load
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+@@ -106,6 +112,9 @@
+ oneboot: x-load.bin
+ scripts/mkoneboot.sh
+
++signGP: scripts/signGP.c
++ gcc -O3 -o signGP $<
++
+ #########################################################################
+ else
+ all install x-load x-load.srec oneboot depend dep:
+@@ -157,6 +166,12 @@
+ @./mkconfig $(@:_config=) arm omap3 omap3530beagle
+
+ #########################################################################
++## OMAP4 (ARM-CortexA9) Systems
++#########################################################################
++omap4430panda_config : unconfig
++ @./mkconfig $(@:_config=) arm omap4 omap4430panda
++
++#########################################################################
+
+ clean:
+ find . -type f \
+@@ -171,7 +186,7 @@
+ | xargs rm -f
+ rm -f $(OBJS) *.bak tags TAGS
+ rm -fr *.*~
+- rm -f x-load x-load.map $(ALL)
++ rm -f x-load x-load.map $(ALL) x-load.bin.ift signGP MLO
+ rm -f include/asm/proc include/asm/arch
+
+ mrproper \
+diff -uNr x-load-f243938.orig/scripts/signGP.c x-load-f243938/scripts/signGP.c
+--- x-load-f243938.orig/scripts/signGP.c 1969-12-31 21:00:00.000000000 -0300
++++ x-load-f243938/scripts/signGP.c 2012-06-07 14:45:39.461648667 -0300
+@@ -0,0 +1,280 @@
++//
++// signGP.c
++// Read the x-load.bin file and write out the x-load.bin.ift file.
++// The signed image is the original pre-pended with the size of the image
++// and the load address. If not entered on command line, file name is
++// assumed to be x-load.bin in current directory and load address is
++// 0x40200800.
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <fcntl.h>
++#include <sys/stat.h>
++#include <string.h>
++#include <malloc.h>
++#include <linux/types.h>
++
++#undef CH_WITH_CHRAM
++struct chsettings {
++ __u32 section_key;
++ __u8 valid;
++ __u8 version;
++ __u16 reserved;
++ __u32 flags;
++} __attribute__ ((__packed__));
++
++/* __u32 cm_clksel_core;
++ __u32 reserved1;
++ __u32 cm_autoidle_dpll_mpu;
++ __u32 cm_clksel_dpll_mpu;
++ __u32 cm_div_m2_dpll_mpu;
++ __u32 cm_autoidle_dpll_core;
++ __u32 cm_clksel_dpll_core;
++ __u32 cm_div_m2_dpll_core;
++ __u32 cm_div_m3_dpll_core;
++ __u32 cm_div_m4_dpll_core;
++ __u32 cm_div_m5_dpll_core;
++ __u32 cm_div_m6_dpll_core;
++ __u32 cm_div_m7_dpll_core;
++ __u32 cm_autoidle_dpll_per;
++ __u32 cm_clksel_dpll_per;
++ __u32 cm_div_m2_dpll_per;
++ __u32 cm_div_m3_dpll_per;
++ __u32 cm_div_m4_dpll_per;
++ __u32 cm_div_m5_dpll_per;
++ __u32 cm_div_m6_dpll_per;
++ __u32 cm_div_m7_dpll_per;
++ __u32 cm_autoidle_dpll_usb;
++ __u32 cm_clksel_dpll_usb;
++ __u32 cm_div_m2_dpll_usb;
++}*/
++
++struct gp_header {
++ __u32 size;
++ __u32 load_addr;
++} __attribute__ ((__packed__));
++
++struct ch_toc {
++ __u32 section_offset;
++ __u32 section_size;
++ __u8 unused[12];
++ __u8 section_name[12];
++} __attribute__ ((__packed__));
++
++struct chram {
++ /*CHRAM */
++ __u32 section_key_chr;
++ __u8 section_disable_chr;
++ __u8 pad_chr[3];
++ /*EMIF1 */
++ __u32 config_emif1;
++ __u32 refresh_emif1;
++ __u32 tim1_emif1;
++ __u32 tim2_emif1;
++ __u32 tim3_emif1;
++ __u32 pwrControl_emif1;
++ __u32 phy_cntr1_emif1;
++ __u32 phy_cntr2_emif1;
++ __u8 modereg1_emif1;
++ __u8 modereg2_emif1;
++ __u8 modereg3_emif1;
++ __u8 pad_emif1;
++ /*EMIF2 */
++ __u32 config_emif2;
++ __u32 refresh_emif2;
++ __u32 tim1_emif2;
++ __u32 tim2_emif2;
++ __u32 tim3_emif2;
++ __u32 pwrControl_emif2;
++ __u32 phy_cntr1_emif2;
++ __u32 phy_cntr2_emif2;
++ __u8 modereg1_emif2;
++ __u8 modereg2_emif2;
++ __u8 modereg3_emif2;
++ __u8 pad_emif2;
++
++ __u32 dmm_lisa_map;
++ __u8 flags;
++ __u8 pad[3];
++} __attribute__ ((__packed__));
++
++
++struct ch_chsettings_chram {
++ struct ch_toc toc_chsettings;
++ struct ch_toc toc_chram;
++ struct ch_toc toc_terminator;
++ struct chsettings section_chsettings;
++ struct chram section_chram;
++ __u8 padding1[512 -
++ (sizeof(struct ch_toc) * 3 +
++ sizeof(struct chsettings) + sizeof(struct chram))];
++ //struct gp_header gpheader;
++} __attribute__ ((__packed__));
++
++struct ch_chsettings_nochram {
++ struct ch_toc toc_chsettings;
++ struct ch_toc toc_terminator;
++ struct chsettings section_chsettings;
++ __u8 padding1[512 -
++ (sizeof(struct ch_toc) * 2 +
++ sizeof(struct chsettings))];
++ //struct gp_header gpheader;
++} __attribute__ ((__packed__));
++
++
++#ifdef CH_WITH_CHRAM
++const struct ch_chsettings_chram config_header = {
++ //CHSETTINGS TOC
++ {sizeof(struct ch_toc) * 4,
++ sizeof(struct chsettings),
++ "",
++ {"CHSETTINGS"}
++ },
++ //CHRAM TOC
++ {sizeof(struct ch_toc) * 4 + sizeof(struct chsettings),
++ sizeof(struct chram),
++ "",
++ {"CHRAM"}
++ },
++ // toc terminator
++ {0xFFFFFFFF,
++ 0xFFFFFFFF,
++ {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++ 0xFF},
++ {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++ 0xFF}
++ },
++ //CHSETTINGS section
++ {
++ 0xC0C0C0C1,
++ 0,
++ 1,
++ 0,
++ 0},
++ //CHRAM section
++ {
++ 0xc0c0c0c2,
++ 0x01,
++ {0x00, 0x00, 0x00},
++
++ /*EMIF1 */
++ 0x80800eb2,
++ 0x00000010,
++ 0x110d1624,
++ 0x3058161b,
++ 0x030060b2,
++ 0x00000200,
++ 0x901ff416,
++ 0x00000000,
++ 0x23,
++ 0x01,
++ 0x02,
++ 0x00,
++
++ /*EMIF2 */
++ 0x80800eb2,
++ 0x000002ba,
++ 0x110d1624,
++ 0x3058161b,
++ 0x03006542,
++ 0x00000200,
++ 0x901ff416,
++ 0x00000000,
++ 0x23,
++ 0x01,
++ 0x02,
++ 0x00,
++
++ /* LISA map */
++ 0x80700100,
++ 0x05,
++ {0x00, 0x00, 0x00},
++ },
++ ""
++};
++#else
++struct ch_chsettings_nochram config_header __attribute__((section(".config_header"))) = {
++ //CHSETTINGS TOC
++ {(sizeof(struct ch_toc)) * 2,
++ sizeof(struct chsettings),
++ "",
++ {"CHSETTINGS"}
++ },
++ // toc terminator
++ {0xFFFFFFFF,
++ 0xFFFFFFFF,
++ {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++ 0xFF},
++ {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++ 0xFF}
++ },
++ //CHSETTINGS section
++ {
++ 0xC0C0C0C1,
++ 0,
++ 1,
++ 0,
++ 0},
++ ""
++};
++#endif
++
++
++main(int argc, char *argv[])
++{
++ int i;
++ char ifname[FILENAME_MAX], ofname[FILENAME_MAX], ch;
++ FILE *ifile, *ofile;
++ unsigned long loadaddr, len;
++ struct stat sinfo;
++
++
++ // Default to x-load.bin and 0x40200800.
++ strcpy(ifname, "x-load.bin");
++ loadaddr = 0x40200800;
++
++ if ((argc == 2) || (argc == 3))
++ strcpy(ifname, argv[1]);
++
++ if (argc == 3)
++ loadaddr = strtoul(argv[2], NULL, 16);
++
++ // Form the output file name.
++ strcpy(ofname, ifname);
++ strcat(ofname, ".ift");
++
++ // Open the input file.
++ ifile = fopen(ifname, "rb");
++ if (ifile == NULL) {
++ printf("Cannot open %s\n", ifname);
++ exit(0);
++ }
++
++ // Get file length.
++ stat(ifname, &sinfo);
++ len = sinfo.st_size;
++
++ // Open the output file and write it.
++ ofile = fopen(ofname, "wb");
++ if (ofile == NULL) {
++ printf("Cannot open %s\n", ofname);
++ fclose(ifile);
++ exit(0);
++ }
++
++ // Pad 1 sector of zeroes.
++ //ch = 0x00;
++ //for (i=0; i<0x200; i++)
++ // fwrite(&ch, 1, 1, ofile);
++
++ fwrite(&config_header, 1, 512, ofile);
++ fwrite(&len, 1, 4, ofile);
++ fwrite(&loadaddr, 1, 4, ofile);
++ for (i=0; i<len; i++) {
++ fread(&ch, 1, 1, ifile);
++ fwrite(&ch, 1, 1, ofile);
++ }
++
++ fclose(ifile);
++ fclose(ofile);
++}
--
1.7.9.5
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ptxdist] [PATCH 2/2] * Add support for the EFL libraries (www.enlightenment.org) * Add remaining host packages used to build EFL Libraries - host-lua - host-libjpeg
2012-06-14 16:32 [ptxdist] [PATCH 0/2] X-Load update and EFL support Flavio Alves
2012-06-14 16:32 ` [ptxdist] [PATCH 1/2] * Update x-load from the following git repository git://git.gitorious.org/x-load-omap3/mainline.git The main implementation is the generation of the MLO file from PTXDIST Flavio Alves
@ 2012-06-14 16:32 ` Flavio Alves
1 sibling, 0 replies; 3+ messages in thread
From: Flavio Alves @ 2012-06-14 16:32 UTC (permalink / raw)
To: ptxdist
---
rules/ecore.in | 192 ++++++++++++++++++++++++++++++++
rules/ecore.make | 278 +++++++++++++++++++++++++++++++++++++++++++++++
rules/edje.in | 60 ++++++++++
rules/edje.make | 127 ++++++++++++++++++++++
rules/eet.in | 41 +++++++
rules/eet.make | 111 +++++++++++++++++++
rules/efl.in | 28 +++++
rules/efreet.in | 10 ++
rules/efreet.make | 103 ++++++++++++++++++
rules/eina.in | 17 +++
rules/eina.make | 113 +++++++++++++++++++
rules/elementary.in | 45 ++++++++
rules/elementary.make | 132 ++++++++++++++++++++++
rules/embryo.in | 10 ++
rules/embryo.make | 101 +++++++++++++++++
rules/evas.in | 135 +++++++++++++++++++++++
rules/evas.make | 201 ++++++++++++++++++++++++++++++++++
rules/host-ecore.in | 9 ++
rules/host-ecore.make | 77 +++++++++++++
rules/host-edje.in | 13 +++
rules/host-edje.make | 73 +++++++++++++
rules/host-eet.in | 10 ++
rules/host-eet.make | 74 +++++++++++++
rules/host-eina.in | 7 ++
rules/host-eina.make | 73 +++++++++++++
rules/host-embryo.in | 7 ++
rules/host-embryo.make | 73 +++++++++++++
rules/host-evas.in | 11 ++
rules/host-evas.make | 73 +++++++++++++
rules/host-libjpeg.in | 7 ++
rules/host-libjpeg.make | 73 +++++++++++++
rules/host-lua.in | 7 ++
rules/host-lua.make | 73 +++++++++++++
33 files changed, 2364 insertions(+)
create mode 100644 rules/ecore.in
create mode 100644 rules/ecore.make
create mode 100644 rules/edje.in
create mode 100644 rules/edje.make
create mode 100644 rules/eet.in
create mode 100644 rules/eet.make
create mode 100644 rules/efl.in
create mode 100644 rules/efreet.in
create mode 100644 rules/efreet.make
create mode 100644 rules/eina.in
create mode 100644 rules/eina.make
create mode 100644 rules/elementary.in
create mode 100644 rules/elementary.make
create mode 100644 rules/embryo.in
create mode 100644 rules/embryo.make
create mode 100644 rules/evas.in
create mode 100644 rules/evas.make
create mode 100644 rules/host-ecore.in
create mode 100644 rules/host-ecore.make
create mode 100644 rules/host-edje.in
create mode 100644 rules/host-edje.make
create mode 100644 rules/host-eet.in
create mode 100644 rules/host-eet.make
create mode 100644 rules/host-eina.in
create mode 100644 rules/host-eina.make
create mode 100644 rules/host-embryo.in
create mode 100644 rules/host-embryo.make
create mode 100644 rules/host-evas.in
create mode 100644 rules/host-evas.make
create mode 100644 rules/host-libjpeg.in
create mode 100644 rules/host-libjpeg.make
create mode 100644 rules/host-lua.in
create mode 100644 rules/host-lua.make
diff --git a/rules/ecore.in b/rules/ecore.in
new file mode 100644
index 0000000..684c758
--- /dev/null
+++ b/rules/ecore.in
@@ -0,0 +1,192 @@
+## SECTION=ecore
+
+menuconfig ECORE
+ bool "ecore"
+ select GLIB if ECORE_GLIB
+ select LIBCURL if ECORE_CURL
+ select OPENSSL if ECORE_OPENSSL
+ select EVAS if (ECORE_EVAS || ECORE_INPUT_EVAS)
+ select XORG_LIB_XEXT if ECORE_X
+ select XORG_PROTO_XEXT if ECORE_X
+ help
+ Ecore is a clean and tiny event loop library with many modules to do lots
+ of convenient things for a programmer, to save time and effort.
+
+ It's small and lean, designed to work on embedded systems all the way to
+ large and powerful multi-cpu workstations. It serialises all system
+ signals, events etc. into a single event queue, that is easily processed
+ without needing to worry about concurrency. A properly written,
+ event-driven program using this kind of programming doesn't need threads,
+ nor has to worry about concurrency. It turns a program into a state
+ machine, and makes it very robust and easy to follow.
+
+ Ecore gives you other handy primitives, such as timers to tick over for you
+ and call specified functions at particular times so the programmer can use
+ this to do things, like animate, or time out on connections or tasks that
+ take too long etc.
+
+ Idle handlers are provided too, as well as calls on entering an idle state
+ (often a very good time to update the state of the program). All events
+ that enter the system are passed to specific callback functions that the
+ program sets up to handle those events. Handling them is simple and other
+ Ecore modules produce more events on the queue, coming from other sources
+ such as file descriptors etc.
+
+ Ecore also lets you have functions called when file descriptors become
+ active for reading or writing, allowing for streamlined, non-blocking IO.
+
+if ECORE
+
+comment "features options ---"
+
+menuconfig ECORE_GLIB
+ bool "Glib support"
+
+if ECORE_GLIB
+ config ECORE_GLIB_ALWAYS
+ bool "Glib integration"
+
+ config ECORE_G_MAINLOOP
+ bool "Glib based main loop"
+
+endif
+
+config ECORE_NLS
+ bool "Native Language Support"
+ default y
+
+config ECORE_CURL
+ bool "Curl support"
+ default y
+
+config ECORE_OPENSSL
+ bool "Openssl support"
+ default y
+
+comment "module options ---"
+
+config ECORE_FB
+ bool "Ecore FB"
+
+menuconfig ECORE_EVAS
+ bool "Ecore Evas"
+ default y
+
+if ECORE_EVAS
+ config ECORE_EVAS_BUFFER
+ bool "Software Buffer"
+ select EVAS_BUFFER
+
+ config ECORE_EVAS_X11
+ bool "Software X11"
+ default y
+ select EVAS_SOFTWARE_XLIB
+
+ config ECORE_EVAS_XRENDER
+ bool "XRender X11"
+ select EVAS_XRENDER_X11
+
+ config ECORE_EVAS_GL
+ bool "OpenGL X11"
+ select EVAS_GL_X11
+
+ config ECORE_EVAS_XCB
+ bool "XRender XCB"
+ select EVAS_XRENDER_XCB
+
+ config ECORE_EVAS_FB
+ select ECORE_EVAS_BUFFER
+ bool "Ecore_Evas FB"
+
+endif # ECORE_EVAS
+
+config ECORE_CON
+ bool "Ecore Con"
+
+config ECORE_IPC
+ bool "IPC"
+
+menuconfig ECORE_FILE
+ bool "File"
+ default y
+
+if ECORE_FILE
+ config ECORE_FILE_POLL
+ bool "Poll support"
+ default y
+
+ config ECORE_FILE_INOTIFY
+ bool "Inotify support"
+ default y
+
+endif # ECORE_FILE
+
+config ECORE_IMF
+ bool "IMF"
+
+
+config ECORE_IMF_EVAS
+ bool "IMF Evas"
+
+config ECORE_INPUT
+ bool "Input"
+
+config ECORE_INPUT_EVAS
+ bool "Input Evas"
+
+menuconfig ECORE_X
+ bool "Ecore X"
+ default y
+ select XORG_LIB_X11
+ select XORG_LIB_X11_XKB
+
+if ECORE_X
+
+ config ECORE_X_COMPOSITE
+ bool "XComposite"
+ select XORG_LIB_XCOMPOSITE
+
+ config ECORE_X_DAMAGE
+ bool "XDamage"
+ select XORG_LIB_XDAMAGE
+
+ config ECORE_X_DMPS
+ bool "XDpms"
+ depends on BROKEN
+
+ config ECORE_X_RANDR
+ bool "Xrandr"
+ select XORG_LIB_XRANDR
+
+ config ECORE_X_RENDER
+ bool "Xrender"
+ select XORG_LIB_XRENDER
+
+ config ECORE_X_SCREENSAVER
+ bool "Xscreensaver"
+ select XORG_LIB_XSCRNSAVER
+
+ config ECORE_X_SHAPE
+ bool "Xshape"
+ depends on BROKEN
+
+ config ECORE_X_SYNC
+ bool "Xsync"
+ depends on BROKEN
+
+ config ECORE_X_XFIXES
+ bool "Xfixes"
+ select XORG_LIB_XFIXES
+
+ config ECORE_X_CURSOR
+ bool "Xcursor"
+ select XORG_LIB_XCURSOR
+
+ config ECORE_X_INPUT
+ bool "Xinput"
+ depends on BROKEN
+ select XORG_PROTO_INPUT
+
+endif # ECORE_X
+
+endif
diff --git a/rules/ecore.make b/rules/ecore.make
new file mode 100644
index 0000000..59bec8f
--- /dev/null
+++ b/rules/ecore.make
@@ -0,0 +1,278 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_ECORE) += ecore
+
+#
+# Paths and names
+#
+ECORE_VERSION := 1.0.1
+ECORE_MD5 := c2f8fde8d2961365333865554db48d88
+ECORE := ecore-$(ECORE_VERSION)
+ECORE_SUFFIX := tar.gz
+ECORE_URL := http://download.enlightenment.org/releases/$(ECORE).$(ECORE_SUFFIX)
+ECORE_SOURCE := $(SRCDIR)/$(ECORE).$(ECORE_SUFFIX)
+ECORE_DIR := $(BUILDDIR)/$(ECORE)
+ECORE_LICENSE := unknown
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(ECORE_SOURCE):
+ @$(call targetinfo)
+ @$(call get, ECORE)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#ECORE_CONF_ENV := $(CROSS_ENV)
+
+#
+# autoconf
+#
+ECORE_CONF_TOOL := autoconf
+ECORE_CONF_OPT := $(CROSS_AUTOCONF_USR)
+ECORE_CONF_OPT += --disable-tests --disable-doc \
+ --disable-ecore-x-xinerama --disable-ecore-x-xprint \
+ --disable-ecore-x-xtest --disable-win32-threads \
+ --enable-debug-threads --disable-gnutls --disable-cares \
+ --disable-notify-win32 --disable-ecore-win32 \
+ --disable-ecore-cocoa --disable-ecore-wince \
+ --disable-ecore-evas-software-8-x11 \
+ --disable-ecore-evas-software-gdi \
+ --disable-ecore-evas-software-ddraw \
+ --disable-ecore-evas-direct3d \
+ --disable-ecore-evas-opengl-glew \
+ --disable-ecore-evas-software-16-ddraw \
+ --disable-ecore-evas-opengl-sdl \
+ --disable-ecore-evas-software-16-wince --with-x
+
+ifdef PTXCONF_ECORE_GLIB
+ ECORE_CONF_OPT += --enable-glib
+else
+ ECORE_CONF_OPT += --disable-glib
+endif
+
+ifdef PTXCONF_ECORE_GLIB_ALWAYS
+ ECORE_CONF_OPT += --enable-glib-integration-always
+else
+ ECORE_CONF_OPT += --disable-glib-integration-always
+endif
+
+ifdef PTXCONF_ECORE_G_MAINLOOP
+ ECORE_CONF_OPT += --enable-g-main-loop
+else
+ ECORE_CONF_OPT += --disable-g-main-loop
+endif
+
+ifdef PTXCONF_ECORE_NLS
+ ECORE_CONF_OPT += --enable-nls
+else
+ ECORE_CONF_OPT += --disable-nls
+endif
+
+ifdef PTXCONF_ECORE_CURL
+ ECORE_CONF_OPT += --enable-curl
+else
+ ECORE_CONF_OPT += --disable-curl
+endif
+
+ifdef PTXCONF_ECORE_FB
+ ECORE_CONF_OPT += --enable-ecore-fb
+else
+ ECORE_CONF_OPT += --disable-ecore-fb
+endif
+
+ifdef PTXCONF_ECORE_EVAS
+ ECORE_CONF_OPT += --enable-ecore-evas
+else
+ ECORE_CONF_OPT += --disable-ecore-evas
+endif
+
+ifdef PTXCONF_ECORE_EVAS_BUFFER
+ ECORE_CONF_OPT += --enable-ecore-evas-software-buffer
+else
+ ECORE_CONF_OPT += --disable-ecore-evas-software-buffer
+endif
+
+ifdef PTXCONF_ECORE_EVAS_X11
+ ECORE_CONF_OPT += --enable-ecore-evas-software-x11
+else
+ ECORE_CONF_OPT += --disable-ecore-evas-software-x11
+endif
+
+ifdef PTXCONF_ECORE_EVAS_XRENDER
+ ECORE_CONF_OPT += --enable-ecore-evas-xrender-x11
+else
+ ECORE_CONF_OPT += --disable-ecore-evas-xrender-x11
+endif
+
+ifdef PTXCONF_ECORE_EVAS_XCB
+ ECORE_CONF_OPT += --enable-ecore-evas-xrender-xcb
+else
+ ECORE_CONF_OPT += --disable-ecore-evas-xrender-xcb
+endif
+
+ifdef PTXCONF_ECORE_EVAS_FB
+ ECORE_CONF_OPT += --enable-ecore-evas-fb
+else
+ ECORE_CONF_OPT += --disable-ecore-evas-fb
+endif
+
+ifdef PTXCONF_ECORE_CON
+ ECORE_CONF_OPT += --enable-ecore-con
+else
+ ECORE_CONF_OPT += --disable-ecore-con
+endif
+
+ifdef PTXCONF_ECORE_IPC
+ ECORE_CONF_OPT += --enable-ecore-ipc
+else
+ ECORE_CONF_OPT += --disable-ecore-ipc
+endif
+
+ifdef PTXCONF_ECORE_FILE
+ ECORE_CONF_OPT += --enable-ecore-file
+else
+ ECORE_CONF_OPT += --disable-ecore-file
+endif
+
+ifdef PTXCONF_ECORE_FILE_POLL
+ ECORE_CONF_OPT += --enable-poll
+else
+ ECORE_CONF_OPT += --disable-poll
+endif
+
+ifdef PTXCONF_ECORE_FILE_INOTIFY
+ ECORE_CONF_OPT += --enable-inotify
+else
+ ECORE_CONF_OPT += --disable-inotify
+endif
+
+ifdef PTXCONF_ECORE_IMF
+ ECORE_CONF_OPT += --enable-ecore-imf
+else
+ ECORE_CONF_OPT += --disable-ecore-imf
+endif
+
+ifdef PTXCONF_ECORE_IMF_EVAS
+ ECORE_CONF_OPT += --enable-ecore-imf-evas
+else
+ ECORE_CONF_OPT += --disable-ecore-imf-evas
+endif
+
+ifdef PTXCONF_ECORE_X
+ ECORE_CONF_OPT += --enable-ecore-x
+else
+ ECORE_CONF_OPT += --disable-ecore-x
+endif
+
+ifdef PTXCONF_ECORE_X_COMPOSITE
+ ECORE_CONF_OPT += --enable-ecore-x-composite
+else
+ ECORE_CONF_OPT += --disable-ecore-x-composite
+endif
+
+ifdef PTXCONF_ECORE_X_DAMAGE
+ ECORE_CONF_OPT += --enable-ecore-x-damage
+else
+ ECORE_CONF_OPT += --disable-ecore-x-damage
+endif
+
+ifdef PTXCONF_ECORE_X_RANDR
+ ECORE_CONF_OPT += --enable-ecore-x-randr
+else
+ ECORE_CONF_OPT += --disable-ecore-x-randr
+endif
+
+ifdef PTXCONF_ECORE_X_RENDER
+ ECORE_CONF_OPT += --enable-ecore-x-render
+else
+ ECORE_CONF_OPT += --disable-ecore-x-render
+endif
+
+ifdef PTXCONF_ECORE_X_SCREENSAVER
+ ECORE_CONF_OPT += --enable-ecore-x-screensaver
+else
+ ECORE_CONF_OPT += --disable-ecore-x-screensaver
+endif
+
+ifdef PTXCONF_ECORE_X_FIXES
+ ECORE_CONF_OPT += --enable-ecore-x-xfixes
+else
+ ECORE_CONF_OPT += --disable-ecore-x-xfixes
+endif
+
+ifdef PTXCONF_ECORE_X_CURSOR
+ ECORE_CONF_OPT += --enable-ecore-x-cursor
+else
+ ECORE_CONF_OPT += --disable-ecore-x-cursor
+endif
+
+
+#$(STATEDIR)/ecore.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(ECORE_DIR)/config.cache)
+# cd $(ECORE_DIR) && \
+# $(ECORE_PATH) $(ECORE_ENV) \
+# ./configure $(ECORE_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/ecore.compile:
+# @$(call targetinfo)
+# @$(call world/compile, ECORE)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/ecore.install:
+# @$(call targetinfo)
+# @$(call world/install, ECORE)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/ecore.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, ecore)
+ @$(call install_fixup, ecore,PRIORITY,optional)
+ @$(call install_fixup, ecore,SECTION,base)
+ @$(call install_fixup, ecore,AUTHOR,"Rafael Fonseca <rafael.fonseca@phiinnovations.com>")
+ @$(call install_fixup, ecore,DESCRIPTION,missing)
+
+ @$(call install_tree, ecore, 0, 0, $(ECORE_PKGDIR), /)
+
+ @$(call install_finish, ecore)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/ecore.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, ECORE)
+
+# vim: syntax=make
diff --git a/rules/edje.in b/rules/edje.in
new file mode 100644
index 0000000..9aaa119
--- /dev/null
+++ b/rules/edje.in
@@ -0,0 +1,60 @@
+## SECTION=edje
+
+menuconfig EDJE
+ bool "edje"
+ select LUA
+ select ECORE
+ select ECORE_FILE
+ select EMBRYO
+ help
+ Edje is a complex graphical design & layout library based on Evas that
+ provides an abstraction layer between the application code and the
+ interface, while allowing extremely flexible dynamic layouts and
+ animations.
+
+ Edje supports the the creation of visual elements (borders of windows,
+ scrollbars, etc.) allowing the designer to control the layout, look and
+ feel and gui animation of any program using Edje as its basic GUI
+ constructor. This library allows for multiple collections of Layouts in
+ one file, sharing the same image database and thus allowing a whole theme
+ to be conveniently packaged into one file for ease of distribution.
+
+ Edje separates the layout and behavior logic. Edje files ship with an
+ image database, used by all the parts in all the collections to source
+ graphical data. It has a directory of logical part names pointing to the
+ part collection entry ID in the file (thus allowing for multiple logical
+ names to point to the same part collection, allowing for the sharing of
+ data between display elements). Each part collection consists of a list
+ of visual parts, as well as a list of programs. A program is a
+ conditionally run program that if a particular event occurs (a button is
+ pressed, a mouse enters or leaves a part) will trigger an action that may
+ affect other parts. In this way a part collection can be "programmed" via
+ its file as to highlight buttons when the mouse passes over them or show
+ hidden parts when a button is clicked somewhere etc. The actions
+ performed in changing from one state to another are also allowed to
+ transition over a period of time, allowing animation.
+
+ This separation and simplistic event driven style of programming can
+ produce almost any look and feel one could want for basic visual elements.
+ Anything more complex is likely the domain of an application or widget set
+ that may use Edje as a convenient way of being able to configure parts of
+ the display.
+
+if EDJE
+
+config EDJE_PLAYER
+ bool "Edje Player"
+
+config EDJE_INSPECTOR
+ bool "Edje Inspector"
+
+config EDJE_EXTERNAL_INSPECTOR
+ bool "Edje External Inspector"
+
+config EDJE_FIXED_POINT
+ bool "Fixed point"
+ help
+ Reduce use of FPU by using Fixed Point provided by Eina and Eet
+
+endif
+
diff --git a/rules/edje.make b/rules/edje.make
new file mode 100644
index 0000000..bc09cae
--- /dev/null
+++ b/rules/edje.make
@@ -0,0 +1,127 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_EDJE) += edje
+
+#
+# Paths and names
+#
+EDJE_VERSION := 1.0.1
+EDJE_MD5 := f04ab314f0e48685cbd0b55c5c99f3b5
+EDJE := edje-$(EDJE_VERSION)
+EDJE_SUFFIX := tar.gz
+EDJE_URL := http://download.enlightenment.org/releases/$(EDJE).$(EDJE_SUFFIX)
+EDJE_SOURCE := $(SRCDIR)/$(EDJE).$(EDJE_SUFFIX)
+EDJE_DIR := $(BUILDDIR)/$(EDJE)
+EDJE_LICENSE := unknown
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(EDJE_SOURCE):
+ @$(call targetinfo)
+ @$(call get, EDJE)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#EDJE_CONF_ENV := $(CROSS_ENV)
+
+#
+# autoconf
+#
+EDJE_CONF_TOOL := autoconf
+EDJE_CONF_OPT := $(CROSS_AUTOCONF_USR)
+EDJE_CONF_OPT += --disable-doc --disable-amalgamation --enable-edje-cc \
+ --enable-edje-decc --enable-edje-recc \
+ --disable-edje-program-cache --disable-edje-calc-cache
+
+ifdef PTXCONF_EDJE_FIXED_POINT
+ EDJE_CONF_OPT += --enable-fixed-point
+else
+ EDJE_CONF_OPT += --disable-fixed-point
+endif
+
+ifdef PTXCONF_EDJE_PLAYER
+ EDJE_CONF_OPT += --enable-edje-player
+else
+ EDJE_CONF_OPT += --disable-edje-player
+endif
+
+ifdef PTXCONF_EDJE_INSPECTOR
+ EDJE_CONF_OPT += --enable-edje-inspector
+else
+ EDJE_CONF_OPT += --disable-edje-inspector
+endif
+
+ifdef PTXCONF_EDJE_EXTERNAL_INSPECTOR
+ EDJE_CONF_OPT += --enable-edje-external-inspector
+else
+ EDJE_CONF_OPT += --disable-edje-external-inspector
+endif
+
+#$(STATEDIR)/edje.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(EDJE_DIR)/config.cache)
+# cd $(EDJE_DIR) && \
+# $(EDJE_PATH) $(EDJE_ENV) \
+# ./configure $(EDJE_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/edje.compile:
+# @$(call targetinfo)
+# @$(call world/compile, EDJE)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/edje.install:
+# @$(call targetinfo)
+# @$(call world/install, EDJE)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/edje.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, edje)
+ @$(call install_fixup, edje,PRIORITY,optional)
+ @$(call install_fixup, edje,SECTION,base)
+ @$(call install_fixup, edje,AUTHOR,"Rafael Fonseca <rafael.fonseca@phiinnovations.com>")
+ @$(call install_fixup, edje,DESCRIPTION,missing)
+
+ @$(call install_tree, edje, 0, 0, $(EDJE_PKGDIR), /)
+ @$(call install_finish, edje)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/edje.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, EDJE)
+
+# vim: syntax=make
diff --git a/rules/eet.in b/rules/eet.in
new file mode 100644
index 0000000..d966cc2
--- /dev/null
+++ b/rules/eet.in
@@ -0,0 +1,41 @@
+## SECTION=eet
+
+menuconfig EET
+ bool "eet"
+ select EINA
+ select ZLIB
+ select LIBJPEG if EET_JPEG
+ select OPENSSL if EET_OPENSSL
+ help
+ Eet is a tiny library designed to write an arbitrary set of chunks of
+ data to a file and optionally compress each chunk (very much like a zip
+ file) and allow fast random-access reading of the file later on. It does
+ not do zip as a zip itself has more complexity than is needed, and it was
+ much simpler to implement this once here.
+
+ Eet is extremely fast, small and simple. Eet files can be very small and
+ highly compressed, making them very optimal for just sending across the
+ internet without having to archive, compress or decompress and install
+ them. They allow for lightning-fast random-access reads once created,
+ making them perfect for storing data that is written once (or rarely) and
+ read many times, but the program does not want to have to read it all in
+ at once.
+
+ It also can encode and decode data structures in memory, as well as image
+ data for saving to Eet files or sending across the network to other
+ machines, or just writing to arbitrary files on the system. All data is
+ encoded in a platform independent way and can be written and read by any
+ architecture.
+
+if EET
+
+config EET_JPEG
+ bool "JPEG support"
+ default y
+ help
+ JPEG support is needed by Evas.
+
+config EET_OPENSSL
+ bool "Enable Openssl EET support"
+
+endif
diff --git a/rules/eet.make b/rules/eet.make
new file mode 100644
index 0000000..e7a6e26
--- /dev/null
+++ b/rules/eet.make
@@ -0,0 +1,111 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_EET) += eet
+
+#
+# Paths and names
+#
+EET_VERSION := 1.4.1
+EET_MD5 := 88d126fce01dc1330a1e798d9063aba1
+EET := eet-$(EET_VERSION)
+EET_SUFFIX := tar.gz
+EET_URL := http://download.enlightenment.org/releases/$(EET).$(EET_SUFFIX)
+EET_SOURCE := $(SRCDIR)/$(EET).$(EET_SUFFIX)
+EET_DIR := $(BUILDDIR)/$(EET)
+EET_LICENSE := unknown
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(EET_SOURCE):
+ @$(call targetinfo)
+ @$(call get, EET)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#EET_CONF_ENV := $(CROSS_ENV)
+
+#
+# autoconf
+#
+EET_CONF_TOOL := autoconf
+EET_CONF_OPT := $(CROSS_AUTOCONF_USR)
+EET_CONF_OPT += --disable-old-eet-file-format --disable-gnutls \
+ --disable-new-gnutls-api --disable-cipher --disable-assert \
+ --disable-signature --disable-tests --disable-coverage \
+ --disable-doc
+
+ifdef PTXCONF_EET_OPENSSL
+ EET_CONF_OPT += --enable-openssl
+else
+ EET_CONF_OPT += --disable-openssl
+endif
+
+#$(STATEDIR)/eet.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(EET_DIR)/config.cache)
+# cd $(EET_DIR) && \
+# $(EET_PATH) $(EET_ENV) \
+# ./configure $(EET_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/eet.compile:
+# @$(call targetinfo)
+# @$(call world/compile, EET)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/eet.install:
+# @$(call targetinfo)
+# @$(call world/install, EET)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/eet.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, eet)
+ @$(call install_fixup, eet,PRIORITY,optional)
+ @$(call install_fixup, eet,SECTION,base)
+ @$(call install_fixup, eet,AUTHOR,"Rafael Fonseca <rafael.fonseca@phiinnovations.com>")
+ @$(call install_fixup, eet,DESCRIPTION,missing)
+
+ @$(call install_tree, eet, 0, 0, $(EET_PKGDIR), /)
+
+ @$(call install_finish, eet)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/eet.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, EET)
+
+# vim: syntax=make
diff --git a/rules/efl.in b/rules/efl.in
new file mode 100644
index 0000000..609f02e
--- /dev/null
+++ b/rules/efl.in
@@ -0,0 +1,28 @@
+## SECTION=graphics_and_multimedia
+
+menu "EFL"
+
+menu "Main Libraries"
+
+source "generated/eina.in"
+source "generated/eet.in"
+source "generated/evas.in"
+source "generated/ecore.in"
+source "generated/embryo.in"
+source "generated/edje.in"
+source "generated/efreet.in"
+source "generated/elementary.in"
+
+endmenu
+
+menu "Python Bindings"
+
+depends on PYTHON
+source "generated/python-evas.in"
+source "generated/python-ecore.in"
+source "generated/python-edje.in"
+source "generated/python-elementary.in"
+
+endmenu
+
+endmenu
diff --git a/rules/efreet.in b/rules/efreet.in
new file mode 100644
index 0000000..6d2a8f5
--- /dev/null
+++ b/rules/efreet.in
@@ -0,0 +1,10 @@
+## SECTION=efreet
+
+config EFREET
+ bool "efreet"
+ select ECORE
+ select ECORE_FILE
+ help
+ Efreet is a library designed to help apps work several of the
+ Freedesktop.org standards regarding Icons, Desktop files and Menus.
+
diff --git a/rules/efreet.make b/rules/efreet.make
new file mode 100644
index 0000000..738fd13
--- /dev/null
+++ b/rules/efreet.make
@@ -0,0 +1,103 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_EFREET) += efreet
+
+#
+# Paths and names
+#
+EFREET_VERSION := 1.0.1
+EFREET_MD5 := 83de651d572e436a651dfa60283098ef
+EFREET := efreet-$(EFREET_VERSION)
+EFREET_SUFFIX := tar.gz
+EFREET_URL := http://download.enlightenment.org/releases/$(EFREET).$(EFREET_SUFFIX)
+EFREET_SOURCE := $(SRCDIR)/$(EFREET).$(EFREET_SUFFIX)
+EFREET_DIR := $(BUILDDIR)/$(EFREET)
+EFREET_LICENSE := unknown
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(EFREET_SOURCE):
+ @$(call targetinfo)
+ @$(call get, EFREET)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#EFREET_CONF_ENV := $(CROSS_ENV)
+
+#
+# autoconf
+#
+EFREET_CONF_TOOL := autoconf
+EFREET_CONF_OPT := $(CROSS_AUTOCONF_USR)
+EFREET_CONF_OPT += --disable-strict-spec --enable-sloppy-spec --disable-doc \
+ --disable-tests --disable-coverage
+
+#$(STATEDIR)/efreet.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(EFREET_DIR)/config.cache)
+# cd $(EFREET_DIR) && \
+# $(EFREET_PATH) $(EFREET_ENV) \
+# ./configure $(EFREET_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/efreet.compile:
+# @$(call targetinfo)
+# @$(call world/compile, EFREET)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/efreet.install:
+# @$(call targetinfo)
+# @$(call world/install, EFREET)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/efreet.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, efreet)
+ @$(call install_fixup, efreet,PRIORITY,optional)
+ @$(call install_fixup, efreet,SECTION,base)
+ @$(call install_fixup, efreet,AUTHOR,"Rafael Fonseca <rafael.fonseca@phiinnovations.com>")
+ @$(call install_fixup, efreet,DESCRIPTION,missing)
+
+ @$(call install_tree, efreet, 0, 0, $(EFREET_PKGDIR), /)
+
+ @$(call install_finish, efreet)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/efreet.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, EFREET)
+
+# vim: syntax=make
diff --git a/rules/eina.in b/rules/eina.in
new file mode 100644
index 0000000..caebd35
--- /dev/null
+++ b/rules/eina.in
@@ -0,0 +1,17 @@
+## SECTION=eina
+
+menuconfig EINA
+ bool "eina"
+ select VALGRIND if EINA_VALGRIND
+ help
+ The Eina library is a library that implements an API for data types in an
+ efficient way. It also provides some useful tools like openin shared
+ libraries, errors management, type conversion, time accounting and memory
+ pool.
+
+if EINA
+
+config EINA_VALGRIND
+ bool "Enable Valgrind debug for mempools"
+
+endif
diff --git a/rules/eina.make b/rules/eina.make
new file mode 100644
index 0000000..829217c
--- /dev/null
+++ b/rules/eina.make
@@ -0,0 +1,113 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_EINA) += eina
+
+#
+# Paths and names
+#
+EINA_VERSION := 1.0.1
+EINA_MD5 := d302a5b981d8e140e64d2943c5f41bdc
+EINA := eina-$(EINA_VERSION)
+EINA_SUFFIX := tar.gz
+EINA_URL := http://download.enlightenment.org/releases/$(EINA).$(EINA_SUFFIX)
+EINA_SOURCE := $(SRCDIR)/$(EINA).$(EINA_SUFFIX)
+EINA_DIR := $(BUILDDIR)/$(EINA)
+EINA_LICENSE := unknown
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(EINA_SOURCE):
+ @$(call targetinfo)
+ @$(call get, EINA)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#EINA_CONF_ENV := $(CROSS_ENV)
+
+#
+# autoconf
+#
+EINA_CONF_TOOL := autoconf
+EINA_CONF_OPT := $(CROSS_AUTOCONF_USR)
+EINA_CONF_OPT += --enable-posix-threads --disable-win32-threads \
+ --enable-debug-threads --enable-magic-debug \
+ --enable-safety-checks --disable-amalgamation \
+ --enable-stringshare-usage --disable-e17 --disable-doc \
+ --disable-tests --disable-coverage --disable-benchmark \
+ --disable-voltron
+
+ifdef PTXCONF_EINA_VALGRIND
+ EINA_CONF_OPT += --enable-valgrind
+else
+ EINA_CONF_OPT += --disable-valgrind
+endif
+
+#$(STATEDIR)/eina.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(EINA_DIR)/config.cache)
+# cd $(EINA_DIR) && \
+# $(EINA_PATH) $(EINA_ENV) \
+# ./configure $(EINA_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/eina.compile:
+# @$(call targetinfo)
+# @$(call world/compile, EINA)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/eina.install:
+# @$(call targetinfo)
+# @$(call world/install, EINA)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/eina.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, eina)
+ @$(call install_fixup, eina,PRIORITY,optional)
+ @$(call install_fixup, eina,SECTION,base)
+ @$(call install_fixup, eina,AUTHOR,"Rafael Fonseca <rafael.fonseca@phiinnovations.com>")
+ @$(call install_fixup, eina,DESCRIPTION,missing)
+
+ @$(call install_tree, eina, 0, 0, $(EINA_PKGDIR), /)
+
+ @$(call install_finish, eina)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/eina.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, EINA)
+
+# vim: syntax=make
diff --git a/rules/elementary.in b/rules/elementary.in
new file mode 100644
index 0000000..9a6ffee
--- /dev/null
+++ b/rules/elementary.in
@@ -0,0 +1,45 @@
+## SECTION=elementary
+
+menuconfig ELEMENTARY
+ bool "elementary"
+ select EVAS_IMAGE_PNG
+ select ECORE_EVAS
+ select ECORE_FILE
+ select ECORE_IMF
+ select ECORE_IMF_EVAS
+ select EFREET if ELEMENTARY_EFREET
+ select EDJE
+ select HOST_EET
+ select HOST_EDJE
+ help
+ Elementary is a widget toolkit and EFL wrapper and convenience library to
+ make it easy to build applications and tools with UI's with less code, as
+ well as being able to still dig down layers.
+
+if ELEMENTARY
+
+comment "build option ---"
+
+config ELEMENTARY_CONFIG
+ bool "Enable elementary_config"
+ default y
+
+config ELEMENTARY_TEST
+ bool "Enable elementary_test"
+ default y
+
+comment "feature options ---"
+
+config ELEMENTARY_ECORE_FB
+ bool "Ecore FB support"
+ select ECORE_FB
+
+config ELEMENTARY_ETHUMB
+ bool "Ethumb support"
+ depends on BROKEN
+
+config ELEMENTARY_EFREET
+ bool "Efreet support"
+ default y
+
+endif
diff --git a/rules/elementary.make b/rules/elementary.make
new file mode 100644
index 0000000..c8e58ad
--- /dev/null
+++ b/rules/elementary.make
@@ -0,0 +1,132 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_ELEMENTARY) += elementary
+
+#
+# Paths and names
+#
+ELEMENTARY_VERSION := 0.7.0.55225
+ELEMENTARY_MD5 := 74f44bb685b91abefb557ea6bc423e1d
+ELEMENTARY := elementary-$(ELEMENTARY_VERSION)
+ELEMENTARY_SUFFIX := tar.gz
+ELEMENTARY_URL := http://download.enlightenment.org/snapshots/LATEST/$(ELEMENTARY).$(ELEMENTARY_SUFFIX)
+ELEMENTARY_SOURCE := $(SRCDIR)/$(ELEMENTARY).$(ELEMENTARY_SUFFIX)
+ELEMENTARY_DIR := $(BUILDDIR)/$(ELEMENTARY)
+ELEMENTARY_LICENSE := unknown
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(ELEMENTARY_SOURCE):
+ @$(call targetinfo)
+ @$(call get, ELEMENTARY)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#ELEMENTARY_CONF_ENV := $(CROSS_ENV)
+
+#
+# autoconf
+#
+ELEMENTARY_CONF_TOOL := autoconf
+ELEMENTARY_CONF_OPT := $(CROSS_AUTOCONF_USR)
+ELEMENTARY_CONF_OPT += --disable-ecore-sdl --disable-ecore-win32 \
+ --disable-ecore-wince --disable-edbus \
+ --disable-eweather --disable-debug --disable-ethumb \
+ --disable-win32-threads --enable-debug-threads \
+ --disable-doc \
+ --with-edje_cc=$(PTXCONF_SYSROOT_HOST)/bin/edje_cc \
+ --with-eet-eet=$(PTXCONF_SYSROOT_HOST)/bin/eet
+
+ifdef PTXCONF_ELEMENTARY_CONFIG
+ ELEMENTARY_CONF_OPT += --enable-elementary-config
+else
+ ELEMENTARY_CONF_OPT += --disable-elementary-config
+endif
+
+ifdef PTXCONF_ELEMENTARY_TEST
+ ELEMENTARY_CONF_OPT += --enable-elementary-test
+else
+ ELEMENTARY_CONF_OPT += --disable-elementary-test
+endif
+
+ifdef PTXCONF_ELEMENTARY_ECORE_FB
+ ELEMENTARY_CONF_OPT += --enable-ecore-fb
+else
+ ELEMENTARY_CONF_OPT += --disable-ecore-fb
+endif
+
+ifdef PTXCONF_ELEMENTARY_EFREET
+ ELEMENTARY_CONF_OPT += --enable-efreet
+else
+ ELEMENTARY_CONF_OPT += --disable-efreet
+endif
+
+#$(STATEDIR)/elementary.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(ELEMENTARY_DIR)/config.cache)
+# cd $(ELEMENTARY_DIR) && \
+# $(ELEMENTARY_PATH) $(ELEMENTARY_ENV) \
+# ./configure $(ELEMENTARY_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/elementary.compile:
+# @$(call targetinfo)
+# @$(call world/compile, ELEMENTARY)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/elementary.install:
+# @$(call targetinfo)
+# @$(call world/install, ELEMENTARY)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/elementary.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, elementary)
+ @$(call install_fixup, elementary,PRIORITY,optional)
+ @$(call install_fixup, elementary,SECTION,base)
+ @$(call install_fixup, elementary,AUTHOR,"Rafael Fonseca <rafael.fonseca@phiinnovations.com>")
+ @$(call install_fixup, elementary,DESCRIPTION,missing)
+
+ @$(call install_tree, elementary, 0, 0, $(ELEMENTARY_PKGDIR), /)
+
+ @$(call install_finish, elementary)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/elementary.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, ELEMENTARY)
+
+# vim: syntax=make
diff --git a/rules/embryo.in b/rules/embryo.in
new file mode 100644
index 0000000..4e80a3c
--- /dev/null
+++ b/rules/embryo.in
@@ -0,0 +1,10 @@
+## SECTION=embryo
+
+config EMBRYO
+ bool "embryo"
+ help
+ Embryo is a tiny library designed to interpret limited Small programs
+ compiled by the included compiler, embryo_cc. It is mostly a cleaned up
+ and smaller version of the original Small abstract machine. The compiler
+ is mostly untouched.
+
diff --git a/rules/embryo.make b/rules/embryo.make
new file mode 100644
index 0000000..556e975
--- /dev/null
+++ b/rules/embryo.make
@@ -0,0 +1,101 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_EMBRYO) += embryo
+
+#
+# Paths and names
+#
+EMBRYO_VERSION := 1.0.0
+EMBRYO_MD5 := 2d6269c931656d5714197e508b144f18
+EMBRYO := embryo-$(EMBRYO_VERSION)
+EMBRYO_SUFFIX := tar.gz
+EMBRYO_URL := http://download.enlightenment.org/releases/$(EMBRYO).$(EMBRYO_SUFFIX)
+EMBRYO_SOURCE := $(SRCDIR)/$(EMBRYO).$(EMBRYO_SUFFIX)
+EMBRYO_DIR := $(BUILDDIR)/$(EMBRYO)
+EMBRYO_LICENSE := unknown
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(EMBRYO_SOURCE):
+ @$(call targetinfo)
+ @$(call get, EMBRYO)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#EMBRYO_CONF_ENV := $(CROSS_ENV)
+
+#
+# autoconf
+#
+EMBRYO_CONF_TOOL := autoconf
+EMBRYO_CONF_OPT := $(CROSS_AUTOCONF_USR) --disable-doc
+
+#$(STATEDIR)/embryo.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(EMBRYO_DIR)/config.cache)
+# cd $(EMBRYO_DIR) && \
+# $(EMBRYO_PATH) $(EMBRYO_ENV) \
+# ./configure $(EMBRYO_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/embryo.compile:
+# @$(call targetinfo)
+# @$(call world/compile, EMBRYO)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/embryo.install:
+# @$(call targetinfo)
+# @$(call world/install, EMBRYO)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/embryo.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, embryo)
+ @$(call install_fixup, embryo,PRIORITY,optional)
+ @$(call install_fixup, embryo,SECTION,base)
+ @$(call install_fixup, embryo,AUTHOR,"Rafael Fonseca <rafael.fonseca@phiinnovations.com>")
+ @$(call install_fixup, embryo,DESCRIPTION,missing)
+
+ @$(call install_tree, embryo, 0, 0, $(EMBRYO_PKGDIR), /)
+
+ @$(call install_finish, embryo)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/embryo.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, EMBRYO)
+
+# vim: syntax=make
diff --git a/rules/evas.in b/rules/evas.in
new file mode 100644
index 0000000..6ef7877
--- /dev/null
+++ b/rules/evas.in
@@ -0,0 +1,135 @@
+## SECTION=evas
+
+menuconfig EVAS
+ bool "evas"
+ select EINA
+ select XORG
+ select XORG_SERVER
+ select XORG_LIB_X11
+ select XORG_LIB_X11_XKB
+ select XORG_SERVER_EXT_SHM
+ select XORG_LIB_XPM if EVAS_IMAGE_XPM
+ select XORG_LIB_XRENDER if EVAS_XRENDER_XCB
+ select EET if (EVAS_EET_FONT_LOADER || EVAS_IMAGE_EET)
+ select GLIBC_PTHREAD if EVAS_PTHREADS
+ select FONTCONFIG if EVAS_FONTCONFIG
+ select LIBXCB if (EVAS_SOFTWARE_XCB || EVAS_XRENDER_XCB)
+ select LIBPNG if EVAS_IMAGE_PNG
+ select VALGRIND if EVAS_VALGRIND
+ help
+ Evas is a clean display canvas API for several target display systems
+ that can draw anti-aliased text, smooth super and sub-sampled scaled
+ images, alpha-blend objects and much more.
+
+ It abstracts any need to know much about what the characteristics of your
+ display system are or what graphics calls are used to draw them and how.
+ It deals on an object level where all you do is create and manipulate
+ objects in a canvas, set their properties, and the rest is done for you.
+
+ Evas optimises the rendering pipeline to minimise effort in redrawing
+ changes made to the canvas and so takes this work out of the programmers
+ hand, saving a lot of time and energy.
+
+ It's small and lean, designed to work on embedded systems all the way to
+ large and powerful multi-cpu workstations. It can be compiled to only
+ have the features you need for your target platform if you so wish, thus
+ keeping it small and lean. It has several display back-ends, letting it
+ display on several display systems, making it portable for cross-device
+ and cross-platform development.
+
+if EVAS
+
+config EVAS_NEON
+ bool
+ help
+ Build neon code. Default=no.
+
+config EVAS_VALGRIND
+ bool
+ help
+ Enable Valgrind fixes to stop false reports
+
+comment "feature options ---"
+
+config EVAS_FONTCONFIG
+ bool "Fontconfig"
+ default y
+ help
+ Enable fontconfig for finding fonts
+
+config EVAS_CACHESERVER
+ bool "Cache server"
+ default y
+ help
+ Enable shared cache server support
+
+config EVAS_PTHREADS
+ bool "Threaded rendering"
+ help
+ Enable threaded rendering
+
+config EVAS_EET_FONT_LOADER
+ bool "EET font loader"
+ default y
+ help
+ Enable EET font loader
+
+comment "backend options ---"
+
+config EVAS_BUFFER
+ bool "Buffer"
+ help
+ Enable Buffer rendering backend
+
+config EVAS_SOFTWARE_XLIB
+ bool "Software Xlib"
+ default y
+ help
+ Enable Software Xlib rendering backend
+
+config EVAS_GL_X11
+ bool "OpenGL X11"
+ help
+ Enable OpenGL X11 rendering backend
+
+config EVAS_XRENDER_X11
+ bool "XRender X11"
+ help
+ Enable XRender X11 rendering backend
+
+config EVAS_SOFTWARE_XCB
+ bool "Software XCB"
+ help
+ Enable Software XCB rendering backend
+
+config EVAS_XRENDER_XCB
+ bool "XRender XCB"
+ help
+ Enable XRender XCB rendering backend
+
+comment "image loader options ---"
+
+config EVAS_IMAGE_PNG
+ bool "PNG support"
+ default y
+ help
+ Enable PNG image loader (needed by Edje)
+
+config EVAS_IMAGE_JPEG
+ bool "JPEG support"
+ default y
+ help
+ Enable JPEG image loader (needed by Edje)
+
+config EVAS_IMAGE_EET
+ bool "EET image support"
+ default y
+ help
+ Enable EET image loader
+
+config EVAS_IMAGE_XPM
+ bool "XPM support"
+ help
+ Enable XPM image loader
+
+endif
diff --git a/rules/evas.make b/rules/evas.make
new file mode 100644
index 0000000..7be3c27
--- /dev/null
+++ b/rules/evas.make
@@ -0,0 +1,201 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_EVAS) += evas
+
+#
+# Paths and names
+#
+EVAS_VERSION := 1.0.1
+EVAS_MD5 := 528debc5e5c75dbc8c5aa7ce5560cdd5
+EVAS := evas-$(EVAS_VERSION)
+EVAS_SUFFIX := tar.gz
+EVAS_URL := http://download.enlightenment.org/releases/$(EVAS).$(EVAS_SUFFIX)
+EVAS_SOURCE := $(SRCDIR)/$(EVAS).$(EVAS_SUFFIX)
+EVAS_DIR := $(BUILDDIR)/$(EVAS)
+EVAS_LICENSE := unknown
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(EVAS_SOURCE):
+ @$(call targetinfo)
+ @$(call get, EVAS)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#EVAS_CONF_ENV := $(CROSS_ENV)
+
+#
+# autoconf
+#
+EVAS_CONF_TOOL := autoconf
+EVAS_CONF_OPT := $(CROSS_AUTOCONF_USR)
+EVAS_CONF_OPT += --disable-strict --disable-doc \
+ --disable-fribidi --disable-gl-flavor-gles \
+ --disable-gles-variety-sgx --disable-gles-variety-s3c6410 \
+ --disable-software-gdi --disable-direct3d \
+ --disable-software-sdl --enable-fb --disable-directfb \
+ --disable-software-8-x11 --disable-software-16-x11 \
+ --disable-software-16-ddraw --disable-software-16-wince \
+ --disable-sdl-primitive --disable-static-software-8 \
+ --disable-image-loader-edb --disable-image-loader-pmaps \
+ --disable-image-loader-tiff --disable-image-loader-tga \
+ --disable-image-loader-gif --disable-image-loader-svg \
+ --enable-cpu-c --enable-evas-magic-debug \
+ --disable-word-cache --disable-metric-cache \
+ --enable-scale-sample --enable-scale-smooth \
+ --disable-convert-yuv --disable-small-dither-mask \
+ --disable-line-dither-mask --disable-no-dither-mask --with-x
+
+ifdef PTXCONF_EVAS_FONTCONFIG
+ EVAS_CONF_OPT += --enable-fontconfig
+else
+ EVAS_CONF_OPT += --disable-fontconfig
+endif
+
+ifdef PTXCONF_EVAS_CACHESERVER
+ EVAS_CONF_OPT += --enable-evas-cserve
+else
+ EVAS_CONF_OPT += --disable-evas-cserve
+endif
+
+ifdef PTXCONF_EVAS_PTHREADS
+ EVAS_CONF_OPT += --enable-pthreads
+else
+ EVAS_CONF_OPT += --disable-pthreads
+endif
+
+ifdef PTXCONF_EVAS_EET_FONT_LOADER
+ EVAS_CONF_OPT += --enable-font-loader-eet
+else
+ EVAS_CONF_OPT += --disable-font-loader-eet
+endif
+
+ifdef PTXCONF_EVAS_BUFFER
+ EVAS_CONF_OPT += --enable-buffer
+else
+ EVAS_CONF_OPT += --disable-buffer
+endif
+
+ifdef PTXCONF_EVAS_GL_X11
+ EVAS_CONF_OPT += --enable-gl-x11
+else
+ EVAS_CONF_OPT += --disable-gl-x11
+endif
+
+ifdef PTXCONF_XRENDER_X11
+ EVAS_CONF_OPT += --enable-xrender-x11
+else
+ EVAS_CONF_OPT += --disable-xrender-x11
+endif
+
+ifdef PTXCONF_EVAS_SOFTWARE_XLIB
+ EVAS_CONF_OPT += --enable-software-xlib
+else
+ EVAS_CONF_OPT += --disable-software-xlib
+endif
+
+ifdef PTXCONF_EVAS_SOFTWARE_XCB
+ EVAS_CONF_OPT += --enable-software-xcb
+else
+ EVAS_CONF_OPT += --disable-software-xcb
+endif
+
+ifdef PTXCONF_EVAS_XRENDER_XCB
+ EVAS_CONF_OPT += --enable-xrender-xcb
+else
+ EVAS_CONF_OPT += --disable-xrender-xcb
+endif
+
+ifdef PTXCONF_EVAS_NEON
+ EVAS_CONF_OPT += --enable-cpu-neon
+else
+ EVAS_CONF_OPT += --disable-cpu-neon
+endif
+
+ifdef PTXCONF_EVAS_IMAGE_PNG
+ EVAS_CONF_OPT += --enable-image-loader-png
+else
+ EVAS_CONF_OPT += --disable-image-loader-png
+endif
+
+ifdef PTXCONF_EVAS_IMAGE_JPEG
+ EVAS_CONF_OPT += --enable-image-loader-jpeg
+else
+ EVAS_CONF_OPT += --disable-image-loader-jpeg
+endif
+
+ifdef PTXCONF_EVAS_IMAGE_XPM
+ EVAS_CONF_OPT += --enable-image-loader-xpm
+else
+ EVAS_CONF_OPT += --disable-image-loader-xpm
+endif
+
+#$(STATEDIR)/evas.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(EVAS_DIR)/config.cache)
+# cd $(EVAS_DIR) && \
+# $(EVAS_PATH) $(EVAS_ENV) \
+# ./configure $(EVAS_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/evas.compile:
+# @$(call targetinfo)
+# @$(call world/compile, EVAS)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/evas.install:
+# @$(call targetinfo)
+# @$(call world/install, EVAS)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/evas.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, evas)
+ @$(call install_fixup, evas,PRIORITY,optional)
+ @$(call install_fixup, evas,SECTION,base)
+ @$(call install_fixup, evas,AUTHOR,"Rafael Fonseca <rafael.fonseca@phiinnovations.com>")
+ @$(call install_fixup, evas,DESCRIPTION,missing)
+
+ @$(call install_tree, evas, 0, 0, $(EVAS_PKGDIR), /)
+
+ @$(call install_finish, evas)
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/evas.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, EVAS)
+
+# vim: syntax=make
diff --git a/rules/host-ecore.in b/rules/host-ecore.in
new file mode 100644
index 0000000..d8759fd
--- /dev/null
+++ b/rules/host-ecore.in
@@ -0,0 +1,9 @@
+## SECTION=hosttools_noprompt
+
+config HOST_ECORE
+ bool
+ prompt "ecore"
+ select HOST_EINA
+ default ALLYES
+ help
+ FIXME
diff --git a/rules/host-ecore.make b/rules/host-ecore.make
new file mode 100644
index 0000000..b8f2afe
--- /dev/null
+++ b/rules/host-ecore.make
@@ -0,0 +1,77 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_ECORE) += host-ecore
+
+# ----------------------------------------------------------------------------
+# Extract
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-ecore.extract:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_ECORE_DIR))
+# @$(call extract, ECORE, $(HOST_BUILDDIR))
+# @$(call patchin, ECORE, $(HOST_ECORE_DIR))
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#HOST_ECORE_CONF_ENV := $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_ECORE_CONF_TOOL := autoconf
+HOST_ECORE_CONF_OPT := $(HOST_AUTOCONF) \
+ --enable-ecore-evas --enable-ecore-imf \
+ --enable-ecore-imf-evas --enable-ecore-file \
+ --enable-ecore-con --enable-ecore-x-input \
+ --disable-ecore-config --disable-ecore-x-sync
+
+#$(STATEDIR)/host-ecore.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_ECORE_DIR)/config.cache)
+# cd $(HOST_ECORE_DIR) && \
+# $(HOST_ECORE_PATH) $(HOST_ECORE_ENV) \
+# ./configure $(HOST_ECORE_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-ecore.compile:
+# @$(call targetinfo)
+# @$(call world/compile, HOST_ECORE)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-ecore.install:
+# @$(call targetinfo)
+# @$(call world/install, HOST_ECORE)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-ecore.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, HOST_ECORE)
+
+# vim: syntax=make
diff --git a/rules/host-edje.in b/rules/host-edje.in
new file mode 100644
index 0000000..14156a2
--- /dev/null
+++ b/rules/host-edje.in
@@ -0,0 +1,13 @@
+## SECTION=hosttools_noprompt
+
+config HOST_EDJE
+ bool
+ select HOST_EINA
+ select HOST_EET
+ select HOST_EVAS
+ select HOST_ECORE
+ select HOST_EMBRYO
+ select HOST_LUA
+ prompt "edje"
+ help
+ FIXME
diff --git a/rules/host-edje.make b/rules/host-edje.make
new file mode 100644
index 0000000..2ec4112
--- /dev/null
+++ b/rules/host-edje.make
@@ -0,0 +1,73 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_EDJE) += host-edje
+
+# ----------------------------------------------------------------------------
+# Extract
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-edje.extract:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EDJE_DIR))
+# @$(call extract, EDJE, $(HOST_BUILDDIR))
+# @$(call patchin, EDJE, $(HOST_EDJE_DIR))
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#HOST_EDJE_CONF_ENV := $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_EDJE_CONF_TOOL := autoconf
+#HOST_EDJE_CONF_OPT := $(HOST_AUTOCONF)
+
+#$(STATEDIR)/host-edje.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EDJE_DIR)/config.cache)
+# cd $(HOST_EDJE_DIR) && \
+# $(HOST_EDJE_PATH) $(HOST_EDJE_ENV) \
+# ./configure $(HOST_EDJE_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-edje.compile:
+# @$(call targetinfo)
+# @$(call world/compile, HOST_EDJE)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-edje.install:
+# @$(call targetinfo)
+# @$(call world/install, HOST_EDJE)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-edje.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, HOST_EDJE)
+
+# vim: syntax=make
diff --git a/rules/host-eet.in b/rules/host-eet.in
new file mode 100644
index 0000000..731e153
--- /dev/null
+++ b/rules/host-eet.in
@@ -0,0 +1,10 @@
+## SECTION=hosttools_noprompt
+
+config HOST_EET
+ bool
+ select ZLIB
+ select HOST_EINA
+ select HOST_LIBJPEG
+ prompt "eet"
+ help
+ FIXME
diff --git a/rules/host-eet.make b/rules/host-eet.make
new file mode 100644
index 0000000..afdf583
--- /dev/null
+++ b/rules/host-eet.make
@@ -0,0 +1,74 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_EET) += host-eet
+
+# ----------------------------------------------------------------------------
+# Extract
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-eet.extract:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EET_DIR))
+# @$(call extract, EET, $(HOST_BUILDDIR))
+# @$(call patchin, EET, $(HOST_EET_DIR))
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#HOST_EET_CONF_ENV := $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_EET_CONF_TOOL := autoconf
+HOST_EET_CONF_OPT := $(HOST_AUTOCONF) --disable-doc --disable-openssl \
+ --disable-gnutls
+
+#$(STATEDIR)/host-eet.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EET_DIR)/config.cache)
+# cd $(HOST_EET_DIR) && \
+# $(HOST_EET_PATH) $(HOST_EET_ENV) \
+# ./configure $(HOST_EET_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-eet.compile:
+# @$(call targetinfo)
+# @$(call world/compile, HOST_EET)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-eet.install:
+# @$(call targetinfo)
+# @$(call world/install, HOST_EET)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-eet.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, HOST_EET)
+
+# vim: syntax=make
diff --git a/rules/host-eina.in b/rules/host-eina.in
new file mode 100644
index 0000000..cb9dd97
--- /dev/null
+++ b/rules/host-eina.in
@@ -0,0 +1,7 @@
+## SECTION=hosttools_noprompt
+
+config HOST_EINA
+ tristate
+ default ALLYES
+ help
+ FIXME
diff --git a/rules/host-eina.make b/rules/host-eina.make
new file mode 100644
index 0000000..1d06593
--- /dev/null
+++ b/rules/host-eina.make
@@ -0,0 +1,73 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_EINA) += host-eina
+
+# ----------------------------------------------------------------------------
+# Extract
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-eina.extract:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EINA_DIR))
+# @$(call extract, EINA, $(HOST_BUILDDIR))
+# @$(call patchin, EINA, $(HOST_EINA_DIR))
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#HOST_EINA_CONF_ENV := $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_EINA_CONF_TOOL := autoconf
+#HOST_EINA_CONF_OPT := $(HOST_AUTOCONF)
+
+#$(STATEDIR)/host-eina.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EINA_DIR)/config.cache)
+# cd $(HOST_EINA_DIR) && \
+# $(HOST_EINA_PATH) $(HOST_EINA_ENV) \
+# ./configure $(HOST_EINA_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-eina.compile:
+# @$(call targetinfo)
+# @$(call world/compile, HOST_EINA)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-eina.install:
+# @$(call targetinfo)
+# @$(call world/install, HOST_EINA)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-eina.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, HOST_EINA)
+
+# vim: syntax=make
diff --git a/rules/host-embryo.in b/rules/host-embryo.in
new file mode 100644
index 0000000..0fe2034
--- /dev/null
+++ b/rules/host-embryo.in
@@ -0,0 +1,7 @@
+## SECTION=hosttools_noprompt
+
+config HOST_EMBRYO
+ bool
+ prompt "embryo"
+ help
+ FIXME
diff --git a/rules/host-embryo.make b/rules/host-embryo.make
new file mode 100644
index 0000000..1ce0634
--- /dev/null
+++ b/rules/host-embryo.make
@@ -0,0 +1,73 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_EMBRYO) += host-embryo
+
+# ----------------------------------------------------------------------------
+# Extract
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-embryo.extract:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EMBRYO_DIR))
+# @$(call extract, EMBRYO, $(HOST_BUILDDIR))
+# @$(call patchin, EMBRYO, $(HOST_EMBRYO_DIR))
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#HOST_EMBRYO_CONF_ENV := $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_EMBRYO_CONF_TOOL := autoconf
+#HOST_EMBRYO_CONF_OPT := $(HOST_AUTOCONF)
+
+#$(STATEDIR)/host-embryo.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EMBRYO_DIR)/config.cache)
+# cd $(HOST_EMBRYO_DIR) && \
+# $(HOST_EMBRYO_PATH) $(HOST_EMBRYO_ENV) \
+# ./configure $(HOST_EMBRYO_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-embryo.compile:
+# @$(call targetinfo)
+# @$(call world/compile, HOST_EMBRYO)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-embryo.install:
+# @$(call targetinfo)
+# @$(call world/install, HOST_EMBRYO)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-embryo.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, HOST_EMBRYO)
+
+# vim: syntax=make
diff --git a/rules/host-evas.in b/rules/host-evas.in
new file mode 100644
index 0000000..75d2ee7
--- /dev/null
+++ b/rules/host-evas.in
@@ -0,0 +1,11 @@
+## SECTION=hosttools_noprompt
+
+config HOST_EVAS
+ bool
+ select HOST_EET
+ select HOST_FONTCONFIG
+ select HOST_LIBPNG
+ select HOST_LIBJPEG
+ prompt "evas"
+ help
+ FIXME
diff --git a/rules/host-evas.make b/rules/host-evas.make
new file mode 100644
index 0000000..b5b0f7f
--- /dev/null
+++ b/rules/host-evas.make
@@ -0,0 +1,73 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_EVAS) += host-evas
+
+# ----------------------------------------------------------------------------
+# Extract
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-evas.extract:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EVAS_DIR))
+# @$(call extract, EVAS, $(HOST_BUILDDIR))
+# @$(call patchin, EVAS, $(HOST_EVAS_DIR))
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#HOST_EVAS_CONF_ENV := $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_EVAS_CONF_TOOL := autoconf
+#HOST_EVAS_CONF_OPT := $(HOST_AUTOCONF)
+
+#$(STATEDIR)/host-evas.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_EVAS_DIR)/config.cache)
+# cd $(HOST_EVAS_DIR) && \
+# $(HOST_EVAS_PATH) $(HOST_EVAS_ENV) \
+# ./configure $(HOST_EVAS_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-evas.compile:
+# @$(call targetinfo)
+# @$(call world/compile, HOST_EVAS)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-evas.install:
+# @$(call targetinfo)
+# @$(call world/install, HOST_EVAS)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-evas.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, HOST_EVAS)
+
+# vim: syntax=make
diff --git a/rules/host-libjpeg.in b/rules/host-libjpeg.in
new file mode 100644
index 0000000..7b29bff
--- /dev/null
+++ b/rules/host-libjpeg.in
@@ -0,0 +1,7 @@
+## SECTION=hosttools_noprompt
+
+config HOST_LIBJPEG
+ tristate
+ prompt "libjpeg"
+ help
+ FIXME
diff --git a/rules/host-libjpeg.make b/rules/host-libjpeg.make
new file mode 100644
index 0000000..db37f4f
--- /dev/null
+++ b/rules/host-libjpeg.make
@@ -0,0 +1,73 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_LIBJPEG) += host-libjpeg
+
+# ----------------------------------------------------------------------------
+# Extract
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-libjpeg.extract:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_LIBJPEG_DIR))
+# @$(call extract, LIBJPEG, $(HOST_BUILDDIR))
+# @$(call patchin, LIBJPEG, $(HOST_LIBJPEG_DIR))
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#HOST_LIBJPEG_CONF_ENV := $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_LIBJPEG_CONF_TOOL := autoconf
+#HOST_LIBJPEG_CONF_OPT := $(HOST_AUTOCONF)
+
+#$(STATEDIR)/host-libjpeg.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_LIBJPEG_DIR)/config.cache)
+# cd $(HOST_LIBJPEG_DIR) && \
+# $(HOST_LIBJPEG_PATH) $(HOST_LIBJPEG_ENV) \
+# ./configure $(HOST_LIBJPEG_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-libjpeg.compile:
+# @$(call targetinfo)
+# @$(call world/compile, HOST_LIBJPEG)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-libjpeg.install:
+# @$(call targetinfo)
+# @$(call world/install, HOST_LIBJPEG)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-libjpeg.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, HOST_LIBJPEG)
+
+# vim: syntax=make
diff --git a/rules/host-lua.in b/rules/host-lua.in
new file mode 100644
index 0000000..cd929c1
--- /dev/null
+++ b/rules/host-lua.in
@@ -0,0 +1,7 @@
+## SECTION=hosttools_noprompt
+
+config HOST_LUA
+ tristate
+ prompt "lua"
+ help
+ FIXME
diff --git a/rules/host-lua.make b/rules/host-lua.make
new file mode 100644
index 0000000..c8d165c
--- /dev/null
+++ b/rules/host-lua.make
@@ -0,0 +1,73 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Rafael Fonseca <rafael.fonseca@phiinnovations.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+HOST_PACKAGES-$(PTXCONF_HOST_LUA) += host-lua
+
+# ----------------------------------------------------------------------------
+# Extract
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-lua.extract:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_LUA_DIR))
+# @$(call extract, LUA, $(HOST_BUILDDIR))
+# @$(call patchin, LUA, $(HOST_LUA_DIR))
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#HOST_LUA_CONF_ENV := $(HOST_ENV)
+
+#
+# autoconf
+#
+HOST_LUA_CONF_TOOL := autoconf
+#HOST_LUA_CONF_OPT := $(HOST_AUTOCONF)
+
+#$(STATEDIR)/host-lua.prepare:
+# @$(call targetinfo)
+# @$(call clean, $(HOST_LUA_DIR)/config.cache)
+# cd $(HOST_LUA_DIR) && \
+# $(HOST_LUA_PATH) $(HOST_LUA_ENV) \
+# ./configure $(HOST_LUA_CONF_OPT)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Compile
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-lua.compile:
+# @$(call targetinfo)
+# @$(call world/compile, HOST_LUA)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-lua.install:
+# @$(call targetinfo)
+# @$(call world/install, HOST_LUA)
+# @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/host-lua.clean:
+# @$(call targetinfo)
+# @$(call clean_pkg, HOST_LUA)
+
+# vim: syntax=make
--
1.7.9.5
--
ptxdist mailing list
ptxdist@pengutronix.de
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-06-14 16:34 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-14 16:32 [ptxdist] [PATCH 0/2] X-Load update and EFL support Flavio Alves
2012-06-14 16:32 ` [ptxdist] [PATCH 1/2] * Update x-load from the following git repository git://git.gitorious.org/x-load-omap3/mainline.git The main implementation is the generation of the MLO file from PTXDIST Flavio Alves
2012-06-14 16:32 ` [ptxdist] [PATCH 2/2] * Add support for the EFL libraries (www.enlightenment.org) * Add remaining host packages used to build EFL Libraries - host-lua - host-libjpeg Flavio Alves
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox