From: "Bart vdr. Meulen" <bartvdrmeulen@gmail.com>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH] cryptsetup: Add package
Date: Mon, 28 May 2012 14:42:39 +0200 [thread overview]
Message-ID: <1338208981-8681-13-git-send-email-bartvdrmeulen@gmail.com> (raw)
From: "Bart vdr. Meulen" <bartvdrmeulen@gmail.com>
Add cryptsetup package, which can be used to conveniently setup up
dm-crypt managed device-mapper mappings
Signed-off-by: Bart vdr. Meulen <bartvdrmeulen@gmail.com>
---
rules/cryptsetup.in | 12 ++++++++++
rules/cryptsetup.make | 61 +++++++++++++++++++++++++++++++++++++++++++++++
rules/libdevmapper.in | 10 ++++++++
rules/libdevmapper.make | 20 ++++++++++++++++
rules/lvm2.in | 16 +++++++++++++
rules/lvm2.make | 15 +++++++++++-
6 files changed, 133 insertions(+), 1 deletion(-)
create mode 100644 rules/cryptsetup.in
create mode 100644 rules/cryptsetup.make
create mode 100644 rules/libdevmapper.in
create mode 100644 rules/libdevmapper.make
diff --git a/rules/cryptsetup.in b/rules/cryptsetup.in
new file mode 100644
index 0000000..4319dbc
--- /dev/null
+++ b/rules/cryptsetup.in
@@ -0,0 +1,12 @@
+## SECTION=shell_and_console
+
+config CRYPTSETUP
+ tristate
+ prompt "cryptsetup"
+ select LIBGCRYPT
+ select LIBUUID
+ select LIBDEVMAPPER
+ select LIBPOPT
+ help
+ cryptsetup is used to conveniently setup up dm-crypt managed
+ device-mapper mappings
diff --git a/rules/cryptsetup.make b/rules/cryptsetup.make
new file mode 100644
index 0000000..0be2f51
--- /dev/null
+++ b/rules/cryptsetup.make
@@ -0,0 +1,61 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Bart vdr. Meulen <bartvdrmeulen@gmail.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_CRYPTSETUP) += cryptsetup
+
+#
+# Paths and names
+#
+CRYPTSETUP_VERSION := 1.1.3
+CRYPTSETUP := cryptsetup-$(CRYPTSETUP_VERSION)
+CRYPTSETUP_SUFFIX := tar.bz2
+CRYPTSETUP_URL := http://cryptsetup.googlecode.com/files/$(CRYPTSETUP).$(CRYPTSETUP_SUFFIX)
+CRYPTSETUP_SOURCE := $(SRCDIR)/$(CRYPTSETUP).$(CRYPTSETUP_SUFFIX)
+CRYPTSETUP_DIR := $(BUILDDIR)/$(CRYPTSETUP)
+CRYPTSETUP_LICENSE := GPLv2
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(CRYPTSETUP_SOURCE):
+ @$(call targetinfo)
+ @$(call get, CRYPTSETUP)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+CRYPTSETUP_CONF_TOOL := autoconf
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/cryptsetup.targetinstall:
+ @$(call targetinfo)
+
+ @$(call install_init, cryptsetup)
+ @$(call install_fixup, cryptsetup,PRIORITY,optional)
+ @$(call install_fixup, cryptsetup,SECTION,base)
+ @$(call install_fixup, cryptsetup,AUTHOR,"Bart vdr. Meulen <bartvdrmeulen@gmail.com>")
+ @$(call install_fixup, cryptsetup,DESCRIPTION,missing)
+
+ @$(call install_copy, cryptsetup, 0, 0, 0755, -, /usr/sbin/cryptsetup)
+ @$(call install_lib, cryptsetup, 0, 0, 644, libcryptsetup)
+
+ @$(call install_finish, cryptsetup)
+
+ @$(call touch)
+
+# vim: syntax=make
+
diff --git a/rules/libdevmapper.in b/rules/libdevmapper.in
new file mode 100644
index 0000000..4698ac2
--- /dev/null
+++ b/rules/libdevmapper.in
@@ -0,0 +1,10 @@
+## SECTION=system_libraries
+
+config LIBDEVMAPPER
+ tristate
+ select LVM2
+ select LVM2_LIBDEVMAPPER
+ help
+ Helper to select the target packet containing libdevmapper.so
+ library and its header.
+
diff --git a/rules/libdevmapper.make b/rules/libdevmapper.make
new file mode 100644
index 0000000..3f74e16
--- /dev/null
+++ b/rules/libdevmapper.make
@@ -0,0 +1,20 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Bart vdr. Meulen <bartvdrmeulen@gmail.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_LIBDEVMAPPER) += libdevmapper
+
+# ----------------------------------------------------------------------------
+# Virtual fake package
+# ----------------------------------------------------------------------------
+
+# vim: syntax=make
diff --git a/rules/lvm2.in b/rules/lvm2.in
index db6e60c..1b5c80a 100644
--- a/rules/lvm2.in
+++ b/rules/lvm2.in
@@ -6,6 +6,7 @@ menuconfig LVM2
select GCCLIBS_GCC_S
select READLINE
select NCURSES
+ select LVM2_LIBDEVMAPPER if LVM2_TOOLS
prompt "lvm2 "
help
LVM2 refers to a new userspace toolset that provide logical volume management
@@ -14,6 +15,21 @@ menuconfig LVM2
if LVM2
+config LVM2_TOOLS
+ bool
+ prompt "Build/intstall LVM2 userland tools"
+ help
+ Build and install userland tools of the LVM2 package
+
+config LVM2_LIBDEVMAPPER
+ bool
+ prompt "Build/install libdevmapper.so"
+ help
+ Build and install the devmapper library
+endif
+
+if LVM2_TOOLS
+
config LVM2_STARTSCRIPT
bool
default y
diff --git a/rules/lvm2.make b/rules/lvm2.make
index 1e96745..442f47d 100644
--- a/rules/lvm2.make
+++ b/rules/lvm2.make
@@ -49,10 +49,19 @@ LVM2_ENV := \
#
LVM2_CONF_TOOL := autoconf
LVM2_CONF_OPT := \
- $(CROSS_AUTOCONF_USR) \
+ $(CROSS_AUTOCONF_USR)
+
+ifdef PTXCONF_LVM2_TOOLS
+LVM2_CONF_OPT +=
--with-device-uid=$(PTXCONF_LVM2_DEVICE_UID) \
--with-device-gid=$(PTXCONF_LVM2_DEVICE_GID) \
--with-device-mode=$(PTXCONF_LVM2_DEVICE_MODE)
+endif
+
+ifndef PTXCONF_LVM2_TOOLS
+LVM2_MAKE_OPT = device-mapper
+LVM2_INSTALL_OPT = device-mapper_install
+endif
# ----------------------------------------------------------------------------
# Target-Install
@@ -67,6 +76,7 @@ $(STATEDIR)/lvm2.targetinstall:
@$(call install_fixup, lvm2,AUTHOR,"Bart vdr. Meulen <bartvdrmeulen@gmail.com>")
@$(call install_fixup, lvm2,DESCRIPTION,missing)
+ifdef PTXCONF_LVM2_TOOLS
@$(call install_copy, lvm2, 0, 0, 0755, -, /usr/sbin/dmsetup)
@$(call install_copy, lvm2, 0, 0, 0755, -, /usr/sbin/fsadm)
@$(call install_copy, lvm2, 0, 0, 0755, -, /usr/sbin/lvmdump)
@@ -117,8 +127,11 @@ $(STATEDIR)/lvm2.targetinstall:
@$(call install_link, lvm2, lvm, /usr/sbin/vgsplit)
@$(call install_alternative, lvm2, 0, 0, 0644, /etc/lvm/lvm.conf)
+endif
+ifdef PTXCONF_LVM2_LIBDEVMAPPER
@$(call install_lib, lvm2, 0, 0, 0644, libdevmapper)
+endif
ifdef PTXCONF_LVM2_STARTSCRIPT
@$(call install_alternative, lvm2, 0, 0, 0755, /etc/init.d/lvm2)
--
1.7.9.5
--
ptxdist mailing list
ptxdist@pengutronix.de
next reply other threads:[~2012-05-28 12:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-28 12:42 Bart vdr. Meulen [this message]
2012-05-30 16:37 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338208981-8681-13-git-send-email-bartvdrmeulen@gmail.com \
--to=bartvdrmeulen@gmail.com \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox