[ptxdist] [PATCH 5/5] Add ices

[Juergen Beisert <jbe@pengutronix.de>]

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
---
 generic/etc/ices.conf |   78 +++++++++++++++++++++++++++++++++++++++++++++++++
 rules/ices.in         |   33 +++++++++++++++++++++
 rules/ices.make       |   71 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 182 insertions(+)
 create mode 100644 generic/etc/ices.conf
 create mode 100644 rules/ices.in
 create mode 100644 rules/ices.make

diff --git a/generic/etc/ices.conf b/generic/etc/ices.conf
new file mode 100644
index 0000000..b58f71a
--- /dev/null
+++ b/generic/etc/ices.conf
@@ -0,0 +1,78 @@
+<?xml version="1.0"?>
+<ices:Configuration xmlns:ices="http://www.icecast.org/projects/ices">
+  <Playlist>
+    <!-- This is the filename used as a playlist when using the builtin 
+	 playlist handler. -->
+    <File>playlist.txt</File>
+    <!-- Set this to 0 if you don't want to randomize your playlist, and to
+	 1 if you do. -->
+    <Randomize>1</Randomize>
+    <!-- One of builtin, perl, or python. -->
+    <Type>builtin</Type>
+    <!-- Module name to pass to the playlist handler if using  perl or python.
+	 If you use the builtin playlist handler then this is ignored -->
+    <Module>ices</Module>
+    <!-- Set this to the number of seconds to crossfade between tracks.
+         Leave out or set to zero to disable crossfading (the default).
+    <Crossfade>5</Crossfade>
+    -->
+  </Playlist>
+
+  <Execution>
+    <!-- Set this to 1 if you want ices to launch in the background as a
+         daemon -->
+    <Background>0</Background>
+    <!-- Set this to 1 if you want to see more verbose output from ices -->
+    <Verbose>0</Verbose>
+    <!-- This directory specifies where ices should put the logfile, cue file
+	 and pid file (if daemonizing). Don't use /tmp if you have l33t h4x0rz
+         on your server. -->
+    <BaseDirectory>/tmp</BaseDirectory>
+  </Execution>
+
+  <Stream>
+    <Server>
+      <!-- Hostname or ip of the icecast server you want to connect to -->
+      <Hostname>localhost</Hostname>
+      <!-- Port of the same -->
+      <Port>8000</Port>
+      <!-- Encoder password on the icecast server -->
+      <Password>letmein</Password>
+      <!-- Header protocol to use when communicating with the server.
+           Shoutcast servers need "icy", icecast 1.x needs "xaudiocast", and
+	   icecast 2.x needs "http". -->
+      <Protocol>http</Protocol>
+    </Server>
+
+    <!-- The name of the mountpoint on the icecast server -->
+    <Mountpoint>/ices</Mountpoint>
+    <!-- The name of the dumpfile on the server for your stream. DO NOT set
+	 this unless you know what you're doing.
+    <Dumpfile>ices.dump</Dumpfile>
+    -->
+    <!-- The name of you stream, not the name of the song! -->
+    <Name>Default stream</Name>
+    <!-- Genre of your stream, be it rock or pop or whatever -->
+    <Genre>Default genre</Genre>
+    <!-- Longer description of your stream -->
+    <Description>Default description</Description>
+    <!-- URL to a page describing your stream -->
+    <URL>http://localhost/</URL>
+    <!-- 0 if you don't want the icecast server to publish your stream on
+	 the yp server, 1 if you do -->
+    <Public>0</Public>
+
+    <!-- Stream bitrate, used to specify bitrate if reencoding, otherwise
+	 just used for display on YP and on the server. Try to keep it
+	 accurate -->
+    <Bitrate>128</Bitrate>
+    <!-- If this is set to 1, and ices is compiled with liblame support,
+	 ices will reencode the stream on the fly to the stream bitrate. -->
+    <Reencode>0</Reencode>
+    <!-- Number of channels to reencode to, 1 for mono or 2 for stereo -->
+    <!-- Sampe rate to reencode to in Hz. Leave out for LAME's best choice
+    <Samplerate>44100</Samplerate>
+    -->
+    <Channels>2</Channels>
+  </Stream>
+</ices:Configuration>
diff --git a/rules/ices.in b/rules/ices.in
new file mode 100644
index 0000000..966fe6c
--- /dev/null
+++ b/rules/ices.in
@@ -0,0 +1,33 @@
+## SECTION=applications
+
+menuconfig ICES
+	tristate
+	prompt "ices                          "
+	select LIBVORBIS if ICES_VORBIS
+	select LIBXML2
+	select PYTHON if ICES_PYTHON
+	select LAME if ICES_LAME
+	help
+	  Ices is a tool sending an MP3 stream to an icecast server
+
+if ICES
+
+config ICES_VORBIS
+	bool
+	prompt "support VORBIS"
+	help
+	  Enable support for VORBIS data format
+
+config ICES_PYTHON
+	bool
+	prompt "enable python support"
+	help
+	  Enable python based scripting support
+
+config ICES_LAME
+	bool
+	prompt "enable lame support"
+	help
+	  Enable MP3 lame support
+
+endif
diff --git a/rules/ices.make b/rules/ices.make
new file mode 100644
index 0000000..a5687ae
--- /dev/null
+++ b/rules/ices.make
@@ -0,0 +1,71 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2012 by Juergen Beisert <jbe@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_ICES) += ices
+
+#
+# Paths and names
+#
+ICES_VERSION	:= 0.4
+ICES_MD5	:= d31450c4011561dae0229f071cb41cb6
+ICES		:= ices-$(ICES_VERSION)
+ICES_SUFFIX	:= tar.gz
+ICES_URL	:= http://downloads.us.xiph.org/releases/ices/$(ICES).$(ICES_SUFFIX)
+ICES_SOURCE	:= $(SRCDIR)/$(ICES).$(ICES_SUFFIX)
+ICES_DIR	:= $(BUILDDIR)/$(ICES)
+ICES_LICENSE	:= GPLv2
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+#
+# autoconf
+#
+ICES_CONF_TOOL	:= autoconf
+ICES_CONF_OPT	:= \
+	$(CROSS_AUTOCONF_USR) \
+	--enable-shared \
+	--disable-static \
+	--$(call ptx/wwo,PTXCONF_ICES_PYTHON)-python \
+	--without-perl \
+	--$(call ptx/wwo,PTXCONF_ICES_LAME)-lame \
+	--$(call ptx/wwo,PTXCONF_ICES_VORBIS)-vorbis \
+	--without-faad \
+	--without-flac
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/ices.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, ices)
+	@$(call install_fixup, ices,PRIORITY,optional)
+	@$(call install_fixup, ices,SECTION,base)
+	@$(call install_fixup, ices,AUTHOR,"Juergen Beisert <jbe@pengutronix.de>")
+	@$(call install_fixup, ices,DESCRIPTION,missing)
+
+	@$(call install_alternative, ices, 0, 0, 0644, /etc/ices.conf)
+ifdef PTXCONF_ICES_PYTHON
+	@$(call install_copy, ices, 0, 0, 0755, /etc/modules)
+	@$(call install_copy, ices, 0, 0, 0755, -, /etc/modules/ices.py.dist)
+endif
+	@$(call install_copy, ices, 0, 0, 0755, -, /usr/bin/ices)
+
+	@$(call install_finish, ices)
+
+	@$(call touch)
+
+# vim: syntax=make
-- 
1.7.9.5


-- 
ptxdist mailing list
ptxdist@pengutronix.de