From: Remy Bohmer <linux@bohmer.net>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH v4 2/7] [x86_64, multilib] Remove all hardcoded paths from glibc.make
Date: Sun, 25 Mar 2012 20:31:35 +0200 [thread overview]
Message-ID: <1332700300-25180-2-git-send-email-linux@bohmer.net> (raw)
In-Reply-To: <1332700300-25180-1-git-send-email-linux@bohmer.net>
These hardcoded paths do not work for a multilib environment where
libraries are typically installed in /lib64 for x86-64 instead of /lib
All correct paths can be found by interrogating the compiler toolchain
for the location of these files.
Signed-off-by: Remy Bohmer <linux@bohmer.net>
---
rules/glibc.make | 23 +++++++++++------------
rules/post/install.make | 18 ++++++------------
scripts/install_copy_toolchain.sh | 2 +-
3 files changed, 18 insertions(+), 25 deletions(-)
diff --git a/rules/glibc.make b/rules/glibc.make
index 2de7a13..0d110ef 100644
--- a/rules/glibc.make
+++ b/rules/glibc.make
@@ -104,33 +104,32 @@ ifdef PTXCONF_GLIBC_NSL
endif
ifdef PTXCONF_GLIBC_GCONF_BASE
- @$(call install_copy, glibc, 0, 0, 0755, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/gconv-modules, /usr/lib/gconv, n)
+ @$(call install_copy_toolchain_lib, glibc, gconv/gconv-modules, n)
endif
ifdef PTXCONF_GLIBC_GCONV_DEF
- @$(call install_copy_toolchain_lib, glibc, gconv/ISO8859-1.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/ISO8859-15.so, /usr/lib/gconv)
+ @$(call install_copy_toolchain_lib, glibc, gconv/ISO8859-1.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/ISO8859-15.so)
endif
ifdef PTXCONF_GLIBC_GCONV_UTF
- @$(call install_copy_toolchain_lib, glibc, gconv/UNICODE.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/UTF-16.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/UTF-32.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/UTF-7.so, /usr/lib/gconv)
+ @$(call install_copy_toolchain_lib, glibc, gconv/UNICODE.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/UTF-16.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/UTF-32.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/UTF-7.so)
endif
ifdef PTXCONF_GLIBC_GCONV_ZH
- @$(call install_copy_toolchain_lib, glibc, gconv/GBBIG5.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/GB18030.so, /usr/lib/gconv)
+ @$(call install_copy_toolchain_lib, glibc, gconv/GBBIG5.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/GB18030.so)
endif
ifdef PTXCONF_GLIBC_I18N_BIN_LOCALE
- @$(call install_copy_toolchain_usr, glibc, bin/locale)
+ @$(call install_copy_toolchain_lib, glibc, bin/locale)
endif
ifdef PTXCONF_GLIBC_I18N_BIN_LOCALEDEF
- @$(call install_copy_toolchain_usr, glibc, bin/localedef)
+ @$(call install_copy_toolchain_lib, glibc, bin/localedef)
endif
ifdef PTXCONF_GLIBC_I18N_RAWDATA
diff --git a/rules/post/install.make b/rules/post/install.make
index 190ec28..cfc73a4 100644
--- a/rules/post/install.make
+++ b/rules/post/install.make
@@ -300,18 +300,15 @@ install_script_replace = \
#
# $1: xpkg label
# $2: source
-# $3: destination
-# $4: strip (y|n) default is to strip
+# $3: strip (y|n) default is to strip
#
install_copy_toolchain_lib = \
XPKG=$(subst _,-,$(strip $(1))); \
LIB="$(strip $2)"; \
- DST="$(strip $3)"; \
- STRIP="$(strip $4)"; \
- test "$${DST}" != "" && DST="-d $${DST}"; \
+ STRIP="$(strip $3)"; \
$(call install_check, install_copy_toolchain_lib); \
${CROSS_ENV_CC} $(CROSS_ENV_STRIP) PKGDIR="$(PKGDIR)" \
- $(SCRIPTSDIR)/install_copy_toolchain.sh -p "$${XPKG}" -l "$${LIB}" $${DST} -s "$${STRIP}"
+ $(SCRIPTSDIR)/install_copy_toolchain.sh -p "$${XPKG}" -l "$${LIB}" -s "$${STRIP}"
#
# install_copy_toolchain_dl
@@ -331,18 +328,15 @@ install_copy_toolchain_dl = \
#
# $1: xpkg label
# $2: source
-# $3: destination
-# $4: strip (y|n) default is to strip
+# $3: strip (y|n) default is to strip
#
install_copy_toolchain_usr = \
XPKG=$(subst _,-,$(strip $(1))); \
LIB="$(strip $2)"; \
- DST="$(strip $3)"; \
- STRIP="$(strip $4)"; \
- test "$${DST}" != "" && DST="-d $${DST}"; \
+ STRIP="$(strip $3)"; \
$(call install_check, install_copy_toolchain_other); \
${CROSS_ENV_CC} $(CROSS_ENV_STRIP) PKGDIR="$(PKGDIR)" \
- $(SCRIPTSDIR)/install_copy_toolchain.sh -p "$${XPKG}" -u "$${LIB}" $${DST} -s "$${STRIP}"
+ $(SCRIPTSDIR)/install_copy_toolchain.sh -p "$${XPKG}" -u "$${LIB}" -s "$${STRIP}"
#
# install_link
diff --git a/scripts/install_copy_toolchain.sh b/scripts/install_copy_toolchain.sh
index 7b91fc4..44c399a 100755
--- a/scripts/install_copy_toolchain.sh
+++ b/scripts/install_copy_toolchain.sh
@@ -101,7 +101,7 @@ ptxd_split_lib_prefix_sysroot_eval() {
lib_dir="${lib_path%/${lib}}" # abs path to that lib
# try to identify sysroot part of that path
- for prefix in {/usr,}/lib{64,32,}{/tls,} ""; do
+ for prefix in {/usr,}/lib{64,32,}{/tls,/gconv,/bin,} ""; do
tmp="${lib_dir%${prefix}}"
if test "${lib_dir}" != "${tmp}"; then
break
--
1.7.5.4
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2012-03-25 18:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-25 18:31 [ptxdist] [PATCH v4 1/7] [x86_64] libgcc need to be install in /lib64 instead of /lib Remy Bohmer
2012-03-25 18:31 ` Remy Bohmer [this message]
2012-03-28 10:52 ` [ptxdist] [PATCH v4 2/7] [x86_64, multilib] Remove all hardcoded paths from glibc.make Michael Olbrich
2012-03-28 15:24 ` Remy Bohmer
2012-03-25 18:31 ` [ptxdist] [PATCH v4 3/7] [x86_64, multilib] Make packages install their libraries at the right place Remy Bohmer
2012-03-27 14:13 ` Michael Olbrich
2012-03-27 19:57 ` Remy Bohmer
2012-03-25 18:31 ` [ptxdist] [PATCH v4 4/7] [x86_64, multilib] Install Zlib " Remy Bohmer
2012-03-25 18:31 ` [ptxdist] [PATCH v4 5/7] [x86_64, multilib] Install Ncurses " Remy Bohmer
2012-03-25 18:31 ` [ptxdist] [PATCH v4 6/7] [x86_64, multilib] Install Readline " Remy Bohmer
2012-03-27 14:09 ` Michael Olbrich
2012-03-27 17:07 ` Remy Bohmer
2012-03-25 18:31 ` [ptxdist] [PATCH v4 7/7] [x86_64, multilib] Install Procps " Remy Bohmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332700300-25180-2-git-send-email-linux@bohmer.net \
--to=linux@bohmer.net \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox