From: Remy Bohmer <linux@bohmer.net>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH 3/9 v2] [x86_64, multilib] Remove all hardcoded paths from glibc.make
Date: Mon, 19 Mar 2012 22:14:46 +0100 [thread overview]
Message-ID: <1332191692-20833-3-git-send-email-linux@bohmer.net> (raw)
In-Reply-To: <1332191692-20833-1-git-send-email-linux@bohmer.net>
These hardcoded paths do not work for a multilib environment where
libraries are typically installed in /lib64 for x86-64 instead of /lib
All correct paths can be found by interrogating the compiler toolchain
for the location of these files.
Signed-off-by: Remy Bohmer <linux@bohmer.net>
---
v2: no changes since v1
rules/glibc.make | 23 +++++++++++------------
rules/post/install.make | 18 ++++++------------
scripts/install_copy_toolchain.sh | 20 +++++++++++++-------
3 files changed, 30 insertions(+), 31 deletions(-)
diff --git a/rules/glibc.make b/rules/glibc.make
index 2de7a13..0d110ef 100644
--- a/rules/glibc.make
+++ b/rules/glibc.make
@@ -104,33 +104,32 @@ ifdef PTXCONF_GLIBC_NSL
endif
ifdef PTXCONF_GLIBC_GCONF_BASE
- @$(call install_copy, glibc, 0, 0, 0755, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/gconv-modules, /usr/lib/gconv, n)
+ @$(call install_copy_toolchain_lib, glibc, gconv/gconv-modules, n)
endif
ifdef PTXCONF_GLIBC_GCONV_DEF
- @$(call install_copy_toolchain_lib, glibc, gconv/ISO8859-1.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/ISO8859-15.so, /usr/lib/gconv)
+ @$(call install_copy_toolchain_lib, glibc, gconv/ISO8859-1.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/ISO8859-15.so)
endif
ifdef PTXCONF_GLIBC_GCONV_UTF
- @$(call install_copy_toolchain_lib, glibc, gconv/UNICODE.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/UTF-16.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/UTF-32.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/UTF-7.so, /usr/lib/gconv)
+ @$(call install_copy_toolchain_lib, glibc, gconv/UNICODE.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/UTF-16.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/UTF-32.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/UTF-7.so)
endif
ifdef PTXCONF_GLIBC_GCONV_ZH
- @$(call install_copy_toolchain_lib, glibc, gconv/GBBIG5.so, /usr/lib/gconv)
- @$(call install_copy_toolchain_lib, glibc, gconv/GB18030.so, /usr/lib/gconv)
+ @$(call install_copy_toolchain_lib, glibc, gconv/GBBIG5.so)
+ @$(call install_copy_toolchain_lib, glibc, gconv/GB18030.so)
endif
ifdef PTXCONF_GLIBC_I18N_BIN_LOCALE
- @$(call install_copy_toolchain_usr, glibc, bin/locale)
+ @$(call install_copy_toolchain_lib, glibc, bin/locale)
endif
ifdef PTXCONF_GLIBC_I18N_BIN_LOCALEDEF
- @$(call install_copy_toolchain_usr, glibc, bin/localedef)
+ @$(call install_copy_toolchain_lib, glibc, bin/localedef)
endif
ifdef PTXCONF_GLIBC_I18N_RAWDATA
diff --git a/rules/post/install.make b/rules/post/install.make
index 190ec28..cfc73a4 100644
--- a/rules/post/install.make
+++ b/rules/post/install.make
@@ -300,18 +300,15 @@ install_script_replace = \
#
# $1: xpkg label
# $2: source
-# $3: destination
-# $4: strip (y|n) default is to strip
+# $3: strip (y|n) default is to strip
#
install_copy_toolchain_lib = \
XPKG=$(subst _,-,$(strip $(1))); \
LIB="$(strip $2)"; \
- DST="$(strip $3)"; \
- STRIP="$(strip $4)"; \
- test "$${DST}" != "" && DST="-d $${DST}"; \
+ STRIP="$(strip $3)"; \
$(call install_check, install_copy_toolchain_lib); \
${CROSS_ENV_CC} $(CROSS_ENV_STRIP) PKGDIR="$(PKGDIR)" \
- $(SCRIPTSDIR)/install_copy_toolchain.sh -p "$${XPKG}" -l "$${LIB}" $${DST} -s "$${STRIP}"
+ $(SCRIPTSDIR)/install_copy_toolchain.sh -p "$${XPKG}" -l "$${LIB}" -s "$${STRIP}"
#
# install_copy_toolchain_dl
@@ -331,18 +328,15 @@ install_copy_toolchain_dl = \
#
# $1: xpkg label
# $2: source
-# $3: destination
-# $4: strip (y|n) default is to strip
+# $3: strip (y|n) default is to strip
#
install_copy_toolchain_usr = \
XPKG=$(subst _,-,$(strip $(1))); \
LIB="$(strip $2)"; \
- DST="$(strip $3)"; \
- STRIP="$(strip $4)"; \
- test "$${DST}" != "" && DST="-d $${DST}"; \
+ STRIP="$(strip $3)"; \
$(call install_check, install_copy_toolchain_other); \
${CROSS_ENV_CC} $(CROSS_ENV_STRIP) PKGDIR="$(PKGDIR)" \
- $(SCRIPTSDIR)/install_copy_toolchain.sh -p "$${XPKG}" -u "$${LIB}" $${DST} -s "$${STRIP}"
+ $(SCRIPTSDIR)/install_copy_toolchain.sh -p "$${XPKG}" -u "$${LIB}" -s "$${STRIP}"
#
# install_link
diff --git a/scripts/install_copy_toolchain.sh b/scripts/install_copy_toolchain.sh
index 726cc61..27e0a9e 100755
--- a/scripts/install_copy_toolchain.sh
+++ b/scripts/install_copy_toolchain.sh
@@ -50,7 +50,7 @@ ptxd_abs2rel() {
# out: $lib_path
#
ptxd_get_lib_path() {
- local lib lib_dir lib_path extra_cflags
+ local lib lib_dir lib_path extra_cppflags extra_cflags
lib="${1}"
extra_cppflags="$(ptxd_get_ptxconf PTXCONF_TARGET_EXTRA_CPPFLAGS)"
@@ -78,7 +78,7 @@ ptxd_get_lib_path() {
# out: dynamic linker name
#
ptxd_get_dl() {
- local dl
+ local dl extra_cppflags extra_cflags
extra_cppflags="$(ptxd_get_ptxconf PTXCONF_TARGET_EXTRA_CPPFLAGS)"
extra_cflags="$(ptxd_get_ptxconf PTXCONF_TARGET_EXTRA_CFLAGS)"
@@ -106,7 +106,7 @@ ptxd_split_lib_prefix_sysroot_eval() {
lib_dir="${lib_path%/${lib}}" # abs path to that lib
# try to identify sysroot part of that path
- for prefix in {/usr,}/lib{64,32,}{/tls,} ""; do
+ for prefix in {/usr,}/lib{64,32,}{/tls,/gconv,/bin,} ""; do
tmp="${lib_dir%${prefix}}"
if test "${lib_dir}" != "${tmp}"; then
break
@@ -241,10 +241,13 @@ ptxd_install_toolchain_lib() {
_ptxd_get_sysroot_usr_by_sysroot() {
- local sysroot
+ local sysroot extra_cppflags extra_cflags
+
+ extra_cppflags="$(ptxd_get_ptxconf PTXCONF_TARGET_EXTRA_CPPFLAGS)"
+ extra_cflags="$(ptxd_get_ptxconf PTXCONF_TARGET_EXTRA_CFLAGS)"
sysroot="$(echo 'int main(void){return 0;}' | \
- ${CC} -x c -o /dev/null -v - 2>&1 | \
+ ${CC} ${extra_cppflags} ${extra_cflags} -x c -o /dev/null -v - 2>&1 | \
sed -ne "/.*collect2.*/s,.*--sysroot=\([^[:space:]]*\).*,\1,p")"
test -n "${sysroot}" || return 1
@@ -254,9 +257,12 @@ _ptxd_get_sysroot_usr_by_sysroot() {
_ptxd_get_sysroot_usr_by_progname() {
- local prog_name
+ local prog_name extra_cppflags extra_cflags
+
+ extra_cppflags="$(ptxd_get_ptxconf PTXCONF_TARGET_EXTRA_CPPFLAGS)"
+ extra_cflags="$(ptxd_get_ptxconf PTXCONF_TARGET_EXTRA_CFLAGS)"
- prog_name="$(${CC} -print-prog-name=gcc)"
+ prog_name="$(${CC} ${extra_cppflags} ${extra_cflags} -print-prog-name=gcc)"
case "${prog_name}" in
/*)
prog_name="$(ptxd_abspath ${prog_name%/bin/gcc})"
--
1.7.5.4
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2012-03-19 21:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-19 21:14 [ptxdist] [PATCH 1/9 v2] [x86_64] Add x86_64 architecture strings Remy Bohmer
2012-03-19 21:14 ` [ptxdist] [PATCH 2/9 v2] [x86_64] libgcc need to be install in /lib64 instead of /lib Remy Bohmer
2012-03-19 21:14 ` Remy Bohmer [this message]
2012-03-23 7:42 ` [ptxdist] [PATCH 3/9 v2] [x86_64, multilib] Remove all hardcoded paths from glibc.make Michael Olbrich
2012-03-24 18:24 ` Remy Bohmer
2012-03-25 11:29 ` Michael Olbrich
2012-03-19 21:14 ` [ptxdist] [PATCH 4/9 v2] [x86_64, multilib] Make packages install their libraries at the right place Remy Bohmer
2012-03-24 11:04 ` Michael Olbrich
2012-03-24 11:06 ` Michael Olbrich
2012-03-19 21:14 ` [ptxdist] [PATCH 5/9 v2] [x86_64, multilib] Install Zlib " Remy Bohmer
2012-03-19 21:14 ` [ptxdist] [PATCH 6/9 v2] [x86_64, multilib] Install Ncurses " Remy Bohmer
2012-03-19 21:14 ` [ptxdist] [PATCH 7/9 v2] [x86_64, multilib] Install Util-linux-ng " Remy Bohmer
2012-03-19 21:14 ` [ptxdist] [PATCH 8/9 v2] [x86_64, multilib] Install Readline " Remy Bohmer
2012-03-19 21:14 ` [ptxdist] [PATCH 9/9 v2] [x86_64, multilib] Install Procps " Remy Bohmer
2012-03-23 7:53 ` [ptxdist] [PATCH 1/9 v2] [x86_64] Add x86_64 architecture strings Michael Olbrich
2012-03-24 18:29 ` Remy Bohmer
2012-03-26 8:50 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332191692-20833-3-git-send-email-linux@bohmer.net \
--to=linux@bohmer.net \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox