mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
From: Jan Weitzel <J.Weitzel@phytec.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] Build MLO from barebox sources
Date: Fri, 09 Mar 2012 15:23:51 +0100	[thread overview]
Message-ID: <1331303031.3653.21.camel@lws-weitzel> (raw)
In-Reply-To: <20120309124703.GC17523@pengutronix.de>

Am Freitag, den 09.03.2012, 13:47 +0100 schrieb Michael Olbrich:
> On Fri, Mar 09, 2012 at 11:02:44AM +0100, Jan Weitzel wrote:
> > Am Donnerstag, den 08.03.2012, 14:23 +0100 schrieb Michael Olbrich:
> > > On Thu, Feb 23, 2012 at 05:40:51PM +0100, Jan Weitzel wrote:
> > > > Build MLO in $(BUILDDIR)/barebox_mlo-* with config PTXCONF_BAREBOX_MLO_CONFIG
> > > > Default config is barebox_mlo.config.
> > > 
> > > Applied.
> > > I did some more modifications in another commit. Please check that it still
> > > works for you.
> > No, version is missing in url. Fixed by a hint from you ;)
> > I am going to send the patch.
> > 
> > ~/git/ptxdist/bin/ptxdist targetinstall barebox_mlo
> 
> Did you run "ptxdist oldconfig" first? If barebox is enabled the
> PTXCONF_BAREBOX_MLO_VERSION defaults to PTXCONF_BAREBOX_VERSION. However
> without oldconfig this will not be set.
Hello, oldconfig didn't help:

~/git/ptxdist/bin/ptxdist oldconfig
~/git/ptxdist/bin/ptxdist targetinstall barebox_mlo

------------------------
target: barebox-.tar.bz2
------------------------

--2012-03-09 15:21:05--
http://www.barebox.org/download/barebox-.tar.bz2
Resolving www.barebox.org... 78.47.139.85,
2a01:4f8:121:2:5054:ff:feaf:fc62
Connecting to www.barebox.org|78.47.139.85|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-03-09 15:21:05 ERROR 404: Not Found.

--2012-03-09 15:21:05--
http://www.pengutronix.de/software/ptxdist/temporary-src/barebox-.tar.bz2
Resolving www.pengutronix.de... 78.47.139.85,
2a01:4f8:121:2:5054:ff:feaf:fc62
Connecting to www.pengutronix.de|78.47.139.85|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-03-09 15:21:05 ERROR 404: Not Found.


Could not download packet
URL: http://www.barebox.org/download/barebox-.tar.bz2

make: *** [/home/ptxdist_src/barebox-.tar.bz2] Error 1



> Michael
> 
> > ------------------------
> > target: barebox-.tar.bz2
> > ------------------------
> > 
> > --2012-03-09 10:41:41--
> > http://www.barebox.org/download/barebox-.tar.bz2
> > Resolving www.barebox.org... 78.47.139.85,
> > 2a01:4f8:121:2:5054:ff:feaf:fc62
> > Connecting to www.barebox.org|78.47.139.85|:80... connected.
> > HTTP request sent, awaiting response... 404 Not Found
> > 2012-03-09 10:41:41 ERROR 404: Not Found.
> > 
> > --2012-03-09 10:41:41--
> > http://www.pengutronix.de/software/ptxdist/temporary-src/barebox-.tar.bz2
> > Resolving www.pengutronix.de... 78.47.139.85,
> > 2a01:4f8:121:2:5054:ff:feaf:fc62
> > Connecting to www.pengutronix.de|78.47.139.85|:80... connected.
> > HTTP request sent, awaiting response... 404 Not Found
> > 2012-03-09 10:41:41 ERROR 404: Not Found.
> > 
> > 
> > Could not download packet
> > URL: http://www.barebox.org/download/barebox-.tar.bz2
> > 
> > make: *** [/home/ptxdist_src/barebox-.tar.bz2] Error 1
> > 
> > 
> > 
> > 
> > 
> > 
> > grep BAREBOX selected_platformconfig 
> > PTXCONF_BAREBOX=y
> > PTXCONF_BAREBOX_VERSION="2011.12.0"
> > PTXCONF_BAREBOX_MD5="a2f7725dfb5b15b2f3275663d663ab3b"
> > PTXCONF_BAREBOX_CONFIG="barebox.config"
> > PTXCONF_BAREBOX_ARCH_STRING="arm"
> > PTXCONF_BAREBOX_EXTRA_ENV=y
> > PTXCONF_BAREBOX_EXTRA_ENV_PATH="${PTXDIST_PLATFORMCONFIGDIR}/barebox-defaultenv"
> > PTXCONF_BAREBOX_MLO=y
> > PTXCONF_BAREBOX_MLO_VERSION="${BAREBOX_VERSION}"
> > PTXCONF_BAREBOX_MLO_MD5="${BAREBOX_MD5}"
> > PTXCONF_BAREBOX_MLO_ARCH_STRING="arm"
> > PTXCONF_BAREBOX_MLO_CONFIG="barebox_mlo.config"
> > # PTXCONF_BAREBOX_BBENV is not set
> > 
> > 
> > ~/git/ptxdist/bin/ptxdist print BAREBOX_MLO_URL
> > http://www.barebox.org/download/barebox-.tar.bz2
> > 
> > 
> > > Michael
> > > 
> > > > Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
> > > > ---
> > > >  platforms/barebox_mlo.in |   19 ++++++++++
> > > >  rules/barebox_mlo.make   |   88 ++++++++++++++++++++++++++++++++++++++++++++++
> > > >  2 files changed, 107 insertions(+), 0 deletions(-)
> > > >  create mode 100644 platforms/barebox_mlo.in
> > > >  create mode 100644 rules/barebox_mlo.make
> > > > 
> > > > diff --git a/platforms/barebox_mlo.in b/platforms/barebox_mlo.in
> > > > new file mode 100644
> > > > index 0000000..f1e9c78
> > > > --- /dev/null
> > > > +++ b/platforms/barebox_mlo.in
> > > > @@ -0,0 +1,19 @@
> > > > +## SECTION=bootloader
> > > > +
> > > > +menuconfig BAREBOX_MLO
> > > > +	prompt "barebox mlo                   "
> > > > +	bool
> > > > +	depends on BAREBOX
> > > > +	help
> > > > +	  Build mlo from barebox sources.
> > > > +
> > > > +if BAREBOX_MLO
> > > > +
> > > > +config BAREBOX_MLO_CONFIG
> > > > +	prompt "mlo config file"
> > > > +	string
> > > > +	default "barebox_mlo.config"
> > > > +	help
> > > > +	  This entry specifies the .config file used to compile mlo.
> > > > +
> > > > +endif
> > > > diff --git a/rules/barebox_mlo.make b/rules/barebox_mlo.make
> > > > new file mode 100644
> > > > index 0000000..0efab3b
> > > > --- /dev/null
> > > > +++ b/rules/barebox_mlo.make
> > > > @@ -0,0 +1,88 @@
> > > > +# -*-makefile-*-
> > > > +#
> > > > +# Copyright (C) 2012 Jan Weitzel <j.weitzel@phytec.de>
> > > > +#
> > > > +# See CREDITS for details about who has contributed to this project.
> > > > +#
> > > > +# For further information about the PTXdist project and license conditions
> > > > +# see the README file.
> > > > +#
> > > > +
> > > > +#
> > > > +# We provide this package
> > > > +#
> > > > +PACKAGES-$(PTXCONF_BAREBOX_MLO) += barebox_mlo
> > > > +
> > > > +#
> > > > +# Paths and names
> > > > +#
> > > > +BAREBOX_MLO_VERSION	= $(BAREBOX_VERSION)
> > > > +BAREBOX_MLO_MD5		= $(BAREBOX_MD5)
> > > > +BAREBOX_MLO		= $(BAREBOX)
> > > > +BAREBOX_MLO_DIR		= $(BUILDDIR)/barebox_mlo-$(BAREBOX_MLO_VERSION)
> > > > +BAREBOX_MLO_SOURCE	= $(BAREBOX_SOURCE)
> > > > +BAREBOX_MLO_LICENSE	:= GPLv2
> > > > +
> > > > +BAREBOX_MLO_CONFIG	:= $(call remove_quotes, \
> > > > +		$(PTXDIST_PLATFORMCONFIGDIR)/$(PTXCONF_BAREBOX_MLO_CONFIG))
> > > > +
> > > > +# ----------------------------------------------------------------------------
> > > > +# Prepare
> > > > +# ----------------------------------------------------------------------------
> > > > +BAREBOX_MLO_CONF_ENV	:= KCONFIG_NOTIMESTAMP=1
> > > > +BAREBOX_MLO_CONF_TOOL	:= kconfig
> > > > +BAREBOX_MLO_CONF_OPT	:= \
> > > > +			HOSTCC=$(HOSTCC) \
> > > > +			ARCH=$(PTXCONF_BAREBOX_ARCH_STRING) \
> > > > +			CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE)
> > > > +
> > > > +BAREBOX_MLO_MAKE_OPT	:= $(BAREBOX_MLO_CONF_OPT)
> > > > +
> > > > +# ----------------------------------------------------------------------------
> > > > +# Install
> > > > +# ----------------------------------------------------------------------------
> > > > +
> > > > +$(STATEDIR)/barebox_mlo.install:
> > > > +	@$(call targetinfo)
> > > > +	@$(call touch)
> > > > +
> > > > +# ----------------------------------------------------------------------------
> > > > +# Target-Install
> > > > +# ----------------------------------------------------------------------------
> > > > +
> > > > +$(STATEDIR)/barebox_mlo.targetinstall:
> > > > +	@$(call targetinfo)
> > > > +#	#barebox renamed barebox.bin.ift to MLO, so fall back to barebox.bin.ift
> > > > +	@ptxd_get_path "$(BAREBOX_MLO_DIR)/MLO" \
> > > > +		"$(BAREBOX_MLO_DIR)/barebox.bin.ift" && \
> > > > +	install -D -m644 "$${ptxd_reply}" "$(IMAGEDIR)/MLO"
> > > > +
> > > > +	@$(call touch)
> > > > +
> > > > +# ----------------------------------------------------------------------------
> > > > +# Clean
> > > > +# ----------------------------------------------------------------------------
> > > > +
> > > > +$(STATEDIR)/barebox_mlo.clean:
> > > > +	@$(call targetinfo)
> > > > +	@$(call clean_pkg, BAREBOX_MLO)
> > > > +	rm -rf $(IMAGEDIR)/MLO
> > > > +
> > > > +# ----------------------------------------------------------------------------
> > > > +# oldconfig / menuconfig
> > > > +# ----------------------------------------------------------------------------
> > > > +
> > > > +barebox_mlo_oldconfig barebox_mlo_menuconfig: $(STATEDIR)/barebox_mlo.extract
> > > > +	@if test -e $(BAREBOX_MLO_CONFIG); then \
> > > > +		cp $(BAREBOX_MLO_CONFIG) $(BAREBOX_MLO_DIR)/.config; \
> > > > +	fi
> > > > +	cd $(BAREBOX_MLO_DIR) && \
> > > > +		$(BAREBOX_MLO_PATH) $(BAREBOX_MLO_ENV) $(MAKE) \
> > > > +			$(BAREBOX_MLO_MAKEVARS) $(subst barebox_mlo_,,$@)
> > > > +	@if cmp -s $(BAREBOX_MLO_DIR)/.config $(BAREBOX_MLO_CONFIG); then \
> > > > +		echo "barebox_mlo configuration unchanged"; \
> > > > +	else \
> > > > +		cp $(BAREBOX_MLO_DIR)/.config $(BAREBOX_MLO_CONFIG); \
> > > > +	fi
> > > > +
> > > > +# vim: syntax=make
> > > > -- 
> > > > 1.7.0.4
> > > > 
> > > > 
> > > > -- 
> > > > ptxdist mailing list
> > > > ptxdist@pengutronix.de
> > > > 
> > > 
> > > -- 
> > > Pengutronix e.K.                           |                             |
> > > Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> > > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> > > Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> > > 
> > 
> > 
> > 
> > -- 
> > ptxdist mailing list
> > ptxdist@pengutronix.de
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 



-- 
ptxdist mailing list
ptxdist@pengutronix.de

  reply	other threads:[~2012-03-09 14:23 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-21 13:54 [ptxdist] MLO Jan Weitzel
2012-02-21 15:09 ` Michael Olbrich
2012-02-21 15:25   ` Jan Weitzel
2012-02-21 16:47     ` Michael Olbrich
2012-02-23  7:31       ` [ptxdist] [RFC] Build MLO from barebox sources Jan Weitzel
2012-02-23  7:47         ` Jan Weitzel
2012-02-23  9:40           ` Michael Olbrich
2012-02-23 16:46             ` Jan Weitzel
2012-02-23  9:54         ` Michael Olbrich
2012-02-23 16:40           ` [ptxdist] [PATCH] " Jan Weitzel
2012-03-08 13:23             ` Michael Olbrich
2012-03-09 10:02               ` Jan Weitzel
2012-03-09 10:03                 ` [ptxdist] [PATCH] barebox_mlo: fix resolving BAREBOX_MLO_ Jan Weitzel
2012-03-09 12:47                 ` [ptxdist] [PATCH] Build MLO from barebox sources Michael Olbrich
2012-03-09 14:23                   ` Jan Weitzel [this message]
2012-03-09 14:40                     ` Michael Olbrich
2012-03-14 13:15                       ` Jan Weitzel
2012-03-14 14:31                         ` Michael Olbrich
2012-03-15  8:27                           ` Jan Weitzel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1331303031.3653.21.camel@lws-weitzel \
    --to=j.weitzel@phytec.de \
    --cc=ptxdist@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox