From: Jan Weitzel <J.Weitzel@phytec.de>
To: ptxdist@pengutronix.de
Subject: Re: [ptxdist] [PATCH] Build MLO from barebox sources
Date: Fri, 09 Mar 2012 11:02:44 +0100 [thread overview]
Message-ID: <1331287364.3653.19.camel@lws-weitzel> (raw)
In-Reply-To: <20120308132323.GM16283@pengutronix.de>
Am Donnerstag, den 08.03.2012, 14:23 +0100 schrieb Michael Olbrich:
> On Thu, Feb 23, 2012 at 05:40:51PM +0100, Jan Weitzel wrote:
> > Build MLO in $(BUILDDIR)/barebox_mlo-* with config PTXCONF_BAREBOX_MLO_CONFIG
> > Default config is barebox_mlo.config.
>
> Applied.
> I did some more modifications in another commit. Please check that it still
> works for you.
No, version is missing in url. Fixed by a hint from you ;)
I am going to send the patch.
~/git/ptxdist/bin/ptxdist targetinstall barebox_mlo
------------------------
target: barebox-.tar.bz2
------------------------
--2012-03-09 10:41:41--
http://www.barebox.org/download/barebox-.tar.bz2
Resolving www.barebox.org... 78.47.139.85,
2a01:4f8:121:2:5054:ff:feaf:fc62
Connecting to www.barebox.org|78.47.139.85|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-03-09 10:41:41 ERROR 404: Not Found.
--2012-03-09 10:41:41--
http://www.pengutronix.de/software/ptxdist/temporary-src/barebox-.tar.bz2
Resolving www.pengutronix.de... 78.47.139.85,
2a01:4f8:121:2:5054:ff:feaf:fc62
Connecting to www.pengutronix.de|78.47.139.85|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-03-09 10:41:41 ERROR 404: Not Found.
Could not download packet
URL: http://www.barebox.org/download/barebox-.tar.bz2
make: *** [/home/ptxdist_src/barebox-.tar.bz2] Error 1
grep BAREBOX selected_platformconfig
PTXCONF_BAREBOX=y
PTXCONF_BAREBOX_VERSION="2011.12.0"
PTXCONF_BAREBOX_MD5="a2f7725dfb5b15b2f3275663d663ab3b"
PTXCONF_BAREBOX_CONFIG="barebox.config"
PTXCONF_BAREBOX_ARCH_STRING="arm"
PTXCONF_BAREBOX_EXTRA_ENV=y
PTXCONF_BAREBOX_EXTRA_ENV_PATH="${PTXDIST_PLATFORMCONFIGDIR}/barebox-defaultenv"
PTXCONF_BAREBOX_MLO=y
PTXCONF_BAREBOX_MLO_VERSION="${BAREBOX_VERSION}"
PTXCONF_BAREBOX_MLO_MD5="${BAREBOX_MD5}"
PTXCONF_BAREBOX_MLO_ARCH_STRING="arm"
PTXCONF_BAREBOX_MLO_CONFIG="barebox_mlo.config"
# PTXCONF_BAREBOX_BBENV is not set
~/git/ptxdist/bin/ptxdist print BAREBOX_MLO_URL
http://www.barebox.org/download/barebox-.tar.bz2
> Michael
>
> > Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
> > ---
> > platforms/barebox_mlo.in | 19 ++++++++++
> > rules/barebox_mlo.make | 88 ++++++++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 107 insertions(+), 0 deletions(-)
> > create mode 100644 platforms/barebox_mlo.in
> > create mode 100644 rules/barebox_mlo.make
> >
> > diff --git a/platforms/barebox_mlo.in b/platforms/barebox_mlo.in
> > new file mode 100644
> > index 0000000..f1e9c78
> > --- /dev/null
> > +++ b/platforms/barebox_mlo.in
> > @@ -0,0 +1,19 @@
> > +## SECTION=bootloader
> > +
> > +menuconfig BAREBOX_MLO
> > + prompt "barebox mlo "
> > + bool
> > + depends on BAREBOX
> > + help
> > + Build mlo from barebox sources.
> > +
> > +if BAREBOX_MLO
> > +
> > +config BAREBOX_MLO_CONFIG
> > + prompt "mlo config file"
> > + string
> > + default "barebox_mlo.config"
> > + help
> > + This entry specifies the .config file used to compile mlo.
> > +
> > +endif
> > diff --git a/rules/barebox_mlo.make b/rules/barebox_mlo.make
> > new file mode 100644
> > index 0000000..0efab3b
> > --- /dev/null
> > +++ b/rules/barebox_mlo.make
> > @@ -0,0 +1,88 @@
> > +# -*-makefile-*-
> > +#
> > +# Copyright (C) 2012 Jan Weitzel <j.weitzel@phytec.de>
> > +#
> > +# See CREDITS for details about who has contributed to this project.
> > +#
> > +# For further information about the PTXdist project and license conditions
> > +# see the README file.
> > +#
> > +
> > +#
> > +# We provide this package
> > +#
> > +PACKAGES-$(PTXCONF_BAREBOX_MLO) += barebox_mlo
> > +
> > +#
> > +# Paths and names
> > +#
> > +BAREBOX_MLO_VERSION = $(BAREBOX_VERSION)
> > +BAREBOX_MLO_MD5 = $(BAREBOX_MD5)
> > +BAREBOX_MLO = $(BAREBOX)
> > +BAREBOX_MLO_DIR = $(BUILDDIR)/barebox_mlo-$(BAREBOX_MLO_VERSION)
> > +BAREBOX_MLO_SOURCE = $(BAREBOX_SOURCE)
> > +BAREBOX_MLO_LICENSE := GPLv2
> > +
> > +BAREBOX_MLO_CONFIG := $(call remove_quotes, \
> > + $(PTXDIST_PLATFORMCONFIGDIR)/$(PTXCONF_BAREBOX_MLO_CONFIG))
> > +
> > +# ----------------------------------------------------------------------------
> > +# Prepare
> > +# ----------------------------------------------------------------------------
> > +BAREBOX_MLO_CONF_ENV := KCONFIG_NOTIMESTAMP=1
> > +BAREBOX_MLO_CONF_TOOL := kconfig
> > +BAREBOX_MLO_CONF_OPT := \
> > + HOSTCC=$(HOSTCC) \
> > + ARCH=$(PTXCONF_BAREBOX_ARCH_STRING) \
> > + CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE)
> > +
> > +BAREBOX_MLO_MAKE_OPT := $(BAREBOX_MLO_CONF_OPT)
> > +
> > +# ----------------------------------------------------------------------------
> > +# Install
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/barebox_mlo.install:
> > + @$(call targetinfo)
> > + @$(call touch)
> > +
> > +# ----------------------------------------------------------------------------
> > +# Target-Install
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/barebox_mlo.targetinstall:
> > + @$(call targetinfo)
> > +# #barebox renamed barebox.bin.ift to MLO, so fall back to barebox.bin.ift
> > + @ptxd_get_path "$(BAREBOX_MLO_DIR)/MLO" \
> > + "$(BAREBOX_MLO_DIR)/barebox.bin.ift" && \
> > + install -D -m644 "$${ptxd_reply}" "$(IMAGEDIR)/MLO"
> > +
> > + @$(call touch)
> > +
> > +# ----------------------------------------------------------------------------
> > +# Clean
> > +# ----------------------------------------------------------------------------
> > +
> > +$(STATEDIR)/barebox_mlo.clean:
> > + @$(call targetinfo)
> > + @$(call clean_pkg, BAREBOX_MLO)
> > + rm -rf $(IMAGEDIR)/MLO
> > +
> > +# ----------------------------------------------------------------------------
> > +# oldconfig / menuconfig
> > +# ----------------------------------------------------------------------------
> > +
> > +barebox_mlo_oldconfig barebox_mlo_menuconfig: $(STATEDIR)/barebox_mlo.extract
> > + @if test -e $(BAREBOX_MLO_CONFIG); then \
> > + cp $(BAREBOX_MLO_CONFIG) $(BAREBOX_MLO_DIR)/.config; \
> > + fi
> > + cd $(BAREBOX_MLO_DIR) && \
> > + $(BAREBOX_MLO_PATH) $(BAREBOX_MLO_ENV) $(MAKE) \
> > + $(BAREBOX_MLO_MAKEVARS) $(subst barebox_mlo_,,$@)
> > + @if cmp -s $(BAREBOX_MLO_DIR)/.config $(BAREBOX_MLO_CONFIG); then \
> > + echo "barebox_mlo configuration unchanged"; \
> > + else \
> > + cp $(BAREBOX_MLO_DIR)/.config $(BAREBOX_MLO_CONFIG); \
> > + fi
> > +
> > +# vim: syntax=make
> > --
> > 1.7.0.4
> >
> >
> > --
> > ptxdist mailing list
> > ptxdist@pengutronix.de
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2012-03-09 10:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-21 13:54 [ptxdist] MLO Jan Weitzel
2012-02-21 15:09 ` Michael Olbrich
2012-02-21 15:25 ` Jan Weitzel
2012-02-21 16:47 ` Michael Olbrich
2012-02-23 7:31 ` [ptxdist] [RFC] Build MLO from barebox sources Jan Weitzel
2012-02-23 7:47 ` Jan Weitzel
2012-02-23 9:40 ` Michael Olbrich
2012-02-23 16:46 ` Jan Weitzel
2012-02-23 9:54 ` Michael Olbrich
2012-02-23 16:40 ` [ptxdist] [PATCH] " Jan Weitzel
2012-03-08 13:23 ` Michael Olbrich
2012-03-09 10:02 ` Jan Weitzel [this message]
2012-03-09 10:03 ` [ptxdist] [PATCH] barebox_mlo: fix resolving BAREBOX_MLO_ Jan Weitzel
2012-03-09 12:47 ` [ptxdist] [PATCH] Build MLO from barebox sources Michael Olbrich
2012-03-09 14:23 ` Jan Weitzel
2012-03-09 14:40 ` Michael Olbrich
2012-03-14 13:15 ` Jan Weitzel
2012-03-14 14:31 ` Michael Olbrich
2012-03-15 8:27 ` Jan Weitzel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331287364.3653.19.camel@lws-weitzel \
--to=j.weitzel@phytec.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox