From: Jan Weitzel <j.weitzel@phytec.de>
To: ptxdist@pengutronix.de
Subject: [ptxdist] [PATCH] Build MLO from barebox sources
Date: Thu, 23 Feb 2012 17:40:51 +0100 [thread overview]
Message-ID: <1330015251-12610-1-git-send-email-j.weitzel@phytec.de> (raw)
In-Reply-To: <20120223095448.GB28597@pengutronix.de>
Build MLO in $(BUILDDIR)/barebox_mlo-* with config PTXCONF_BAREBOX_MLO_CONFIG
Default config is barebox_mlo.config.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
---
platforms/barebox_mlo.in | 19 ++++++++++
rules/barebox_mlo.make | 88 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 107 insertions(+), 0 deletions(-)
create mode 100644 platforms/barebox_mlo.in
create mode 100644 rules/barebox_mlo.make
diff --git a/platforms/barebox_mlo.in b/platforms/barebox_mlo.in
new file mode 100644
index 0000000..f1e9c78
--- /dev/null
+++ b/platforms/barebox_mlo.in
@@ -0,0 +1,19 @@
+## SECTION=bootloader
+
+menuconfig BAREBOX_MLO
+ prompt "barebox mlo "
+ bool
+ depends on BAREBOX
+ help
+ Build mlo from barebox sources.
+
+if BAREBOX_MLO
+
+config BAREBOX_MLO_CONFIG
+ prompt "mlo config file"
+ string
+ default "barebox_mlo.config"
+ help
+ This entry specifies the .config file used to compile mlo.
+
+endif
diff --git a/rules/barebox_mlo.make b/rules/barebox_mlo.make
new file mode 100644
index 0000000..0efab3b
--- /dev/null
+++ b/rules/barebox_mlo.make
@@ -0,0 +1,88 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2012 Jan Weitzel <j.weitzel@phytec.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_BAREBOX_MLO) += barebox_mlo
+
+#
+# Paths and names
+#
+BAREBOX_MLO_VERSION = $(BAREBOX_VERSION)
+BAREBOX_MLO_MD5 = $(BAREBOX_MD5)
+BAREBOX_MLO = $(BAREBOX)
+BAREBOX_MLO_DIR = $(BUILDDIR)/barebox_mlo-$(BAREBOX_MLO_VERSION)
+BAREBOX_MLO_SOURCE = $(BAREBOX_SOURCE)
+BAREBOX_MLO_LICENSE := GPLv2
+
+BAREBOX_MLO_CONFIG := $(call remove_quotes, \
+ $(PTXDIST_PLATFORMCONFIGDIR)/$(PTXCONF_BAREBOX_MLO_CONFIG))
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+BAREBOX_MLO_CONF_ENV := KCONFIG_NOTIMESTAMP=1
+BAREBOX_MLO_CONF_TOOL := kconfig
+BAREBOX_MLO_CONF_OPT := \
+ HOSTCC=$(HOSTCC) \
+ ARCH=$(PTXCONF_BAREBOX_ARCH_STRING) \
+ CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE)
+
+BAREBOX_MLO_MAKE_OPT := $(BAREBOX_MLO_CONF_OPT)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox_mlo.install:
+ @$(call targetinfo)
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox_mlo.targetinstall:
+ @$(call targetinfo)
+# #barebox renamed barebox.bin.ift to MLO, so fall back to barebox.bin.ift
+ @ptxd_get_path "$(BAREBOX_MLO_DIR)/MLO" \
+ "$(BAREBOX_MLO_DIR)/barebox.bin.ift" && \
+ install -D -m644 "$${ptxd_reply}" "$(IMAGEDIR)/MLO"
+
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox_mlo.clean:
+ @$(call targetinfo)
+ @$(call clean_pkg, BAREBOX_MLO)
+ rm -rf $(IMAGEDIR)/MLO
+
+# ----------------------------------------------------------------------------
+# oldconfig / menuconfig
+# ----------------------------------------------------------------------------
+
+barebox_mlo_oldconfig barebox_mlo_menuconfig: $(STATEDIR)/barebox_mlo.extract
+ @if test -e $(BAREBOX_MLO_CONFIG); then \
+ cp $(BAREBOX_MLO_CONFIG) $(BAREBOX_MLO_DIR)/.config; \
+ fi
+ cd $(BAREBOX_MLO_DIR) && \
+ $(BAREBOX_MLO_PATH) $(BAREBOX_MLO_ENV) $(MAKE) \
+ $(BAREBOX_MLO_MAKEVARS) $(subst barebox_mlo_,,$@)
+ @if cmp -s $(BAREBOX_MLO_DIR)/.config $(BAREBOX_MLO_CONFIG); then \
+ echo "barebox_mlo configuration unchanged"; \
+ else \
+ cp $(BAREBOX_MLO_DIR)/.config $(BAREBOX_MLO_CONFIG); \
+ fi
+
+# vim: syntax=make
--
1.7.0.4
--
ptxdist mailing list
ptxdist@pengutronix.de
next prev parent reply other threads:[~2012-02-23 16:40 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-21 13:54 [ptxdist] MLO Jan Weitzel
2012-02-21 15:09 ` Michael Olbrich
2012-02-21 15:25 ` Jan Weitzel
2012-02-21 16:47 ` Michael Olbrich
2012-02-23 7:31 ` [ptxdist] [RFC] Build MLO from barebox sources Jan Weitzel
2012-02-23 7:47 ` Jan Weitzel
2012-02-23 9:40 ` Michael Olbrich
2012-02-23 16:46 ` Jan Weitzel
2012-02-23 9:54 ` Michael Olbrich
2012-02-23 16:40 ` Jan Weitzel [this message]
2012-03-08 13:23 ` [ptxdist] [PATCH] " Michael Olbrich
2012-03-09 10:02 ` Jan Weitzel
2012-03-09 10:03 ` [ptxdist] [PATCH] barebox_mlo: fix resolving BAREBOX_MLO_ Jan Weitzel
2012-03-09 12:47 ` [ptxdist] [PATCH] Build MLO from barebox sources Michael Olbrich
2012-03-09 14:23 ` Jan Weitzel
2012-03-09 14:40 ` Michael Olbrich
2012-03-14 13:15 ` Jan Weitzel
2012-03-14 14:31 ` Michael Olbrich
2012-03-15 8:27 ` Jan Weitzel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330015251-12610-1-git-send-email-j.weitzel@phytec.de \
--to=j.weitzel@phytec.de \
--cc=ptxdist@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox