mailarchive of the ptxdist mailing list
 help / color / mirror / Atom feed
* Re: [ptxdist] PHP7.3 support? Since 5.6.x is End Of Life
@ 2019-02-22 11:50 Thorsten LIEPERT
  0 siblings, 0 replies; 6+ messages in thread
From: Thorsten LIEPERT @ 2019-02-22 11:50 UTC (permalink / raw)
  To: ptxdist


[-- Attachment #1.1: Type: text/plain, Size: 3471 bytes --]


Thorsten Liepert 
Development Software

Phone +49 911 97479 839 | thorsten.liepert@diehl.com

Diehl Connectivity Solutions GmbH
Stephanstraße 49
90478 Nürnberg
https://www.diehl-cs.com

> Am 22.02.2019 um 12:39 schrieb webmaster@zutroll.de:
> 
> Am 2019-02-22 10:24, schrieb Thorsten LIEPERT:
>> Hello,
>> A while back I already did a transition to PHP7.2 but harnet time to
>> populate it here yet.
>> I just tried to upgrade to 7.3.2 and it work without any problems.
>> I’ll attach my patches. I also did clean up the lighted rule and
>> removed php5 with this stack.
>> Thorsten Liepert
>> Development Software
>> Phone +49 911 97479 839 | thorsten.liepert@diehl.com
>> Diehl Connectivity Solutions GmbH
>> Stephanstraße 49
>> 90478 Nürnberg
>> https://www.diehl-cs.com
> Hello,
> 
> thanks for your patches, has mysql be gone in the php7? its missing in your files.
> 
> Also it is not linking against the shared library from ptxdist it is still php bundled sqlite 3.24.0.
> 
> But anyway very good starting point, now with correct config in files.
As we are currently not using MySQL or sqlite I haven’t tested this part actually. But if I remember correctly I read something about that PHP
Has removed some Parts of the MySQL-API.

http://php.net/manual/en/mysql.php

Include PDO_MYSQL or mysqli support you might have to add those switches to the makefiles.

> 
> 
> Should:
> --with-config-file-path=/etc/php7 \
> 
> 
> be
> 
> --with-config-file-path=/etc/php \
> 
> regarding the make install?
> 
You are right this should be

--with-config-file-path=/etc/php \



> Regards
> 
>>> Am 22.02.2019 um 09:59 schrieb webmaster@zutroll.de:
>>> Hello,
>>> PHP 7.3.2 seems to work well with sqlite, since it uses its own bundeled sqlite3.
>>> I use with --with-sqlite3, so not specifing any special src.
>>> I have attached my modified php make file.
>>> I kept the naming php5.make due limited time, but the target file is now named php instead of php5.
>>> Hope this helps to getting this working again with ptxdist builded sqlite3.so
>>> Regards
>>> Am 2019-02-22 09:28, schrieb Michael Olbrich:
>>>> Hi,
>>>> On Mon, Feb 11, 2019 at 03:31:38PM +0100, Simon Agostini wrote:
>>>>>    is PHP 7.3 suppot planned?
>>>> I'd be happy to accept patches for this, but I currently don't have plans
>>>> to do this myself.
>>>>>    I tried to adapt the PHP5 make file but I get:
>>>>>    /build-target/php-7.3.2/ext/pdo_sqlite/libsqlite/sqlite3.c', needed by
>>>>>    'ext/pdo_sqlite/libsqlite/sqlite3.lo'.  Stop.
>>>>>    with --with-sqlite3=$(PTXDIST_SYSROOT_TARGET)/usr
>>>>>    if I remove the dir path it works, but I think this shall not be the
>>>>>    optimal build!?
>>>> The php5 package is not maintained very well. It has no priority for me and
>>>> other than the occasional minor version bump, nobody else seems to care
>>>> either.
>>>> I'm guessing, that the php build system is broken and there is some mixup
>>>> about internal vs. system sqlite. Do you get sqlite support at all if you
>>>> remove --with-sqlite3=...?
>>>> Michael
>>> <php5.make>_______________________________________________
>>> ptxdist mailing list
>>> ptxdist@pengutronix.de
>> _______________________________________________
>> ptxdist mailing list
>> ptxdist@pengutronix.de
> 
> _______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de

[-- Attachment #1.2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3899 bytes --]

[-- Attachment #2: Type: text/plain, Size: 91 bytes --]

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [ptxdist] PHP7.3 support? Since 5.6.x is End Of Life
@ 2019-02-22  9:24 Thorsten LIEPERT
  2019-02-22 11:39 ` webmaster
  0 siblings, 1 reply; 6+ messages in thread
From: Thorsten LIEPERT @ 2019-02-22  9:24 UTC (permalink / raw)
  To: ptxdist


[-- Attachment #1.1.1: Type: text/plain, Size: 276 bytes --]

Hello,

A while back I already did a transition to PHP7.2 but harnet time to populate it here yet.

I just tried to upgrade to 7.3.2 and it work without any problems. I’ll attach my patches. I also did clean up the lighted rule and removed php5 with this stack. 




[-- Attachment #1.1.2: 0001-new-package-PHP-7.patch --]
[-- Type: application/octet-stream, Size: 87848 bytes --]

From cb90f52766719e7fe7588f901694a0c55ee5acb5 Mon Sep 17 00:00:00 2001
From: Thorsten Liepert <thorsten.liepert@diehl.com>
Date: Mon, 15 Oct 2018 16:08:49 +0200
Subject: [PATCH 1/3] new package PHP 7

Signed-off-by: Thorsten Liepert <thorsten.liepert@diehl.com>
---
 projectroot/etc/php/php.ini | 1918 +++++++++++++++++++++++++++++++++++
 rules/php7.in               |  279 +++++
 rules/php7.make             |  251 +++++
 3 files changed, 2448 insertions(+)
 create mode 100644 projectroot/etc/php/php.ini
 create mode 100644 rules/php7.in
 create mode 100644 rules/php7.make

diff --git a/projectroot/etc/php/php.ini b/projectroot/etc/php/php.ini
new file mode 100644
index 000000000..a6c68294e
--- /dev/null
+++ b/projectroot/etc/php/php.ini
@@ -0,0 +1,1918 @@
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini   ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (C:\windows or C:\winnt)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple.  Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory.  Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com.  Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation.  If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; |  bitwise OR
+; ^  bitwise XOR
+; &  bitwise AND
+; ~  bitwise NOT
+; !  boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+;  foo =         ; sets foo to an empty string
+;  foo = None    ; sets foo to an empty string
+;  foo = "None"  ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is php.ini-production INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+;   Default Value: On
+;   Development Value: On
+;   Production Value: Off
+
+; display_startup_errors
+;   Default Value: Off
+;   Development Value: On
+;   Production Value: Off
+
+; error_reporting
+;   Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+;   Development Value: E_ALL
+;   Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; html_errors
+;   Default Value: On
+;   Development Value: On
+;   Production value: On
+
+; log_errors
+;   Default Value: Off
+;   Development Value: On
+;   Production Value: On
+
+; max_input_time
+;   Default Value: -1 (Unlimited)
+;   Development Value: 60 (60 seconds)
+;   Production Value: 60 (60 seconds)
+
+; output_buffering
+;   Default Value: Off
+;   Development Value: 4096
+;   Production Value: 4096
+
+; register_argc_argv
+;   Default Value: On
+;   Development Value: Off
+;   Production Value: Off
+
+; request_order
+;   Default Value: None
+;   Development Value: "GP"
+;   Production Value: "GP"
+
+; session.gc_divisor
+;   Default Value: 100
+;   Development Value: 1000
+;   Production Value: 1000
+
+; session.sid_bits_per_character
+;   Default Value: 4
+;   Development Value: 5
+;   Production Value: 5
+
+; short_open_tag
+;   Default Value: On
+;   Development Value: Off
+;   Production Value: Off
+
+; track_errors
+;   Default Value: Off
+;   Development Value: On
+;   Production Value: Off
+
+; variables_order
+;   Default Value: "EGPCS"
+;   Development Value: "GPCS"
+;   Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options  ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; <? and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that <?php and ?> should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the <?= shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+;   functions.
+; Possible Values:
+;   On = Enabled and buffer is unlimited. (Use with caution)
+;   Off = Disabled
+;   Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function.  For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+;   directive. Instead, explicitly set the output handler using ob_start().
+;   Using this ini directive may cause problems unless you know what script
+;   is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+;   and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+;   Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; URL rewriter function rewrites URL on the fly by using
+; output buffer. You can set target tags by this configuration.
+; "form" tag is special tag. It will add hidden input tag to pass values.
+; Refer to session.trans_sid_tags for usage.
+; Default Value: "form="
+; Development Value: "form="
+; Production Value: "form="
+;url_rewriter.tags
+
+; URL rewriter will not rewrites absolute URL nor form by default. To enable
+; absolute URL rewrite, allowed hosts must be defined at RUNTIME.
+; Refer to session.trans_sid_hosts for more details.
+; Default Value: ""
+; Development Value: ""
+; Production Value: ""
+;url_rewriter.hosts
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+;   outputs chunks that are few hundreds bytes each as a result of
+;   compression. If you prefer a larger chunk size for better
+;   performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+;   output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block.  This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block.  Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; When floats & doubles are serialized, store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+; The value is also used for json_encode when encoding double values.
+; If -1 is used, then dtoa mode 0 is used which automatically select the best
+; precision.
+serialize_precision = -1
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below.  This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode.  Anything that's acceptable in
+; <span style="color: ???????"> would work.
+; http://php.net/syntax-highlighting
+;highlight.string  = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html    = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 4096k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner.  CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings.  To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts.  This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header).  It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = On
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+; max_input_vars = 1000
+
+; Maximum amount of memory a script may consume (128MB)
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL             - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR           - fatal run-time errors
+; E_RECOVERABLE_ERROR  - almost fatal run-time errors
+; E_WARNING         - run-time warnings (non-fatal errors)
+; E_PARSE           - compile-time parse errors
+; E_NOTICE          - run-time notices (these are warnings which often result
+;                     from a bug in your code, but it's possible that it was
+;                     intentional (e.g., using an uninitialized variable and
+;                     relying on the fact it is automatically initialized to an
+;                     empty string)
+; E_STRICT          - run-time notices, enable to have PHP suggest changes
+;                     to your code which will ensure the best interoperability
+;                     and forward compatibility of your code
+; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
+;                     initial startup
+; E_COMPILE_ERROR   - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR      - user-generated error message
+; E_USER_WARNING    - user-generated warning message
+; E_USER_NOTICE     - user-generated notice message
+; E_DEPRECATED      - warn about code that will not work in future versions
+;                     of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+;   E_ALL (Show all errors, warnings and notices including coding standards.)
+;   E_ALL & ~E_NOTICE  (Show all errors, except for notices)
+;   E_ALL & ~E_NOTICE & ~E_STRICT  (Show all errors, except for notices and coding standards warnings.)
+;   E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR  (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+;   Off = Do not display any errors
+;   stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+;   On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = Off
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = Off
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; This directive is DEPRECATED.
+; Default Value: Off
+; Development Value: Off
+; Production Value: Off
+; http://php.net/track-errors
+;track_errors = Off
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: On
+; Development Value: On
+; Production value: On
+; http://php.net/html-errors
+html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = "<span style='color: #ff0000'>"
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = "</span>"
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&amp;"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any affect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a media type using the Content-Type header. To
+; disable this, simply set it to be empty.
+;
+; PHP's built-in default media type is set to text/html.
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+;include_path = ".:/php/includes"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues.  The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+; extension_dir = "./"
+; On windows:
+; extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+; sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function.  The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers.  Left undefined, PHP turns this on by default.  You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution.  Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec.  A setting
+; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside
+; of the web tree and people will not be able to circumvent .htaccess security.
+; http://php.net/cgi.dicard-path
+;cgi.discard_path=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client.  This allows IIS to define the
+; security context that the request runs under.  mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS.  Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!
+; (shebang) at the top of the running script. This line might be needed if the
+; script support running both as stand-alone script and via PHP CGI<. PHP in CGI
+; mode skips this line and ignores its content if this directive is turned on.
+; http://php.net/cgi.check-shebang-line
+;cgi.check_shebang_line=1
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 300M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+;   extension=modulename
+;
+; For example:
+;
+;   extension=mysqli
+; 
+; When the extension library to load is not located in the default extension
+; directory, You may specify an absolute path to the library file:
+;
+;   extension=/path/to/extension/mysqli.so
+;
+; Note : The syntax used in previous PHP versions ('extension=<ext>.so' and
+; 'extension='php_<ext>.dll') is supported for legacy reasons and may be
+; deprecated in a future PHP major version. So, when it is possible, please
+; move to the new ('extension=<ext>) syntax.
+;
+; Notes for Windows environments :
+;
+; - Many DLL files are located in the extensions/ (PHP 4) or ext/ (PHP 5+)
+;   extension folders as well as the separate PECL DLL download (PHP 5+).
+;   Be sure to appropriately set the extension_dir directive.
+;
+;extension=bz2
+;extension=curl
+;extension=fileinfo
+;extension=gd2
+;extension=gettext
+;extension=gmp
+;extension=intl
+;extension=imap
+;extension=interbase
+;extension=ldap
+;extension=mbstring
+;extension=exif      ; Must be after mbstring as it depends on it
+;extension=mysqli
+;extension=oci8_12c  ; Use with Oracle Database 12c Instant Client
+;extension=odbc
+;extension=openssl
+;extension=pdo_firebird
+;extension=pdo_mysql
+;extension=pdo_oci
+;extension=pdo_odbc
+;extension=pdo_pgsql
+;extension=pdo_sqlite
+;extension=pgsql
+;extension=shmop
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=snmp
+
+;extension=soap
+;extension=sockets
+;extension=sqlite3
+;extension=tidy
+;extension=xmlrpc
+;extension=xsl
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < intput_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+;intl.use_exceptions = 0
+
+[sqlite3]
+;sqlite3.extension_dir =
+
+[Pcre]
+;PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+;PCRE library recursion limit.
+;Please note that if you set this value to a high number you may consume all
+;the available process stack and eventually crash PHP (due to reaching the
+;stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+;Enables or disables JIT compilation of patterns. This requires the PCRE
+;library to be compiled with JIT support.
+;pcre.jit=1
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/pdo_mysql.cache_size
+pdo_mysql.cache_size = 2000
+
+; Default socket name for local MySQL connects.  If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/pdo_mysql.default-socket
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = Off
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db    =  Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user  =  Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw    =  Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields.  Returns number of bytes to variables.  0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+;birdstep.max_links = -1
+
+[Interbase]
+; Allow or prevent persistent links.
+ibase.allow_persistent = 1
+
+; Maximum number of persistent links.  -1 means no limit.
+ibase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+ibase.max_links = -1
+
+; Default database name for ibase_connect().
+;ibase.default_db =
+
+; Default username for ibase_connect().
+;ibase.default_user =
+
+; Default password for ibase_connect().
+;ibase.default_password =
+
+; Default charset for ibase_connect().
+;ibase.default_charset =
+
+; Default timestamp format.
+ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
+
+; Default date format.
+ibase.dateformat = "%Y-%m-%d"
+
+; Default time format.
+ibase.timeformat = "%H:%M:%S"
+
+[MySQLi]
+
+; Maximum number of persistent links.  -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links.  -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; If mysqlnd is used: Number of cache slots for the internal result set cache
+; http://php.net/mysqli.cache_size
+mysqli.cache_size = 2000
+
+; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects.  If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password!  And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_statistics
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+; http://php.net/mysqlnd.collect_memory_statistics
+mysqlnd.collect_memory_statistics = Off
+
+; Records communication from all extensions using mysqlnd to the specified log
+; file.
+; http://php.net/mysqlnd.debug
+;mysqlnd.debug =
+
+; Defines which queries will be logged.
+; http://php.net/mysqlnd.log_mask
+;mysqlnd.log_mask = 0
+
+; Default size of the mysqlnd memory pool, which is used by result sets.
+; http://php.net/mysqlnd.mempool_default_size
+;mysqlnd.mempool_default_size = 16000
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+; http://php.net/mysqlnd.net_cmd_buffer_size
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+; http://php.net/mysqlnd.net_read_buffer_size
+;mysqlnd.net_read_buffer_size = 32768
+
+; Timeout for network requests in seconds.
+; http://php.net/mysqlnd.net_read_timeout
+;mysqlnd.net_read_timeout = 31536000
+
+; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
+; key.
+; http://php.net/mysqlnd.sha256_server_public_key
+;mysqlnd.sha256_server_public_key =
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP).  To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links.  -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent).  -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler.  In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+;     session.save_path = "N;/path"
+;
+; where N is an integer.  Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories.  This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+;         You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+;         use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+;     session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+;session.save_path = "/tmp"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept uninitialized session ID and regenerate
+; session ID if browser sends uninitialized session ID. Strict mode protects
+; applications from session fixation via session adoption vulnerability. It is
+; disabled by default for maximum compatibility, but enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Handler used to serialize data.  php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started
+; on every session initialization. The probability is calculated by using
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator
+; and gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 1
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using the following equation:
+; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
+; session.gc_divisor is the denominator in the equation. Setting this value to 1
+; when the session.gc_divisor value is 100 will give you approximately a 1% chance
+; the gc will run on any give request. Increasing this value to 1000 will give you
+; a 0.1% chance the gc will run on any give request. For high volume production servers,
+; this is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+;       (see session.save_path above), then garbage collection does *not*
+;       happen automatically.  You will need to do your own garbage
+;       collection through a shell script, cron entry, or some other method.
+;       For example, the following script would is the equivalent of
+;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+;          find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+;   to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+;   in publicly accessible computer.
+; - User may access your site with the same session ID
+;   always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Set session ID character length. This value could be between 22 to 256.
+; Shorter length than default is supported only for compatibility reason.
+; Users should use 32 or more chars.
+; http://php.net/session.sid-length
+; Default Value: 32
+; Development Value: 26
+; Production Value: 26
+session.sid_length = 26
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; <form> is special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs. <form> tag's action attribute URL will not be modified
+; unless it is specified.
+; Note that all valid entries require a "=", even if no value follows.
+; Default Value: "a=href,area=href,frame=src,form="
+; Development Value: "a=href,area=href,frame=src,form="
+; Production Value: "a=href,area=href,frame=src,form="
+; http://php.net/url-rewriter.tags
+session.trans_sid_tags = "a=href,area=href,frame=src,form="
+
+; URL rewriter does not rewrite absolute URLs by default.
+; To enable rewrites for absolute pathes, target hosts must be specified
+; at RUNTIME. i.e. use ini_set()
+; <form> tags is special. PHP will check action attribute's URL regardless
+; of session.trans_sid_tags setting.
+; If no host is defined, HTTP_HOST will be used for allowed host.
+; Example value: php.net,www.php.net,wiki.php.net
+; Use "," for multiple hosts. No spaces are allowed.
+; Default Value: ""
+; Development Value: ""
+; Production Value: ""
+;session.trans_sid_hosts=""
+
+; Define how many bits are stored in each character when converting
+; the binary hash data to something readable.
+; Possible values:
+;   4  (4 bits: 0-9, a-f)
+;   5  (5 bits: 0-9, a-v)
+;   6  (6 bits: 0-9, a-z, A-Z, "-", ",")
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+; http://php.net/session.hash-bits-per-character
+session.sid_bits_per_character = 5
+
+; Enable upload progress tracking in $_SESSION
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.enabled
+;session.upload_progress.enabled = On
+
+; Cleanup the progress information as soon as all POST data has been read
+; (i.e. upload completed).
+; Default Value: On
+; Development Value: On
+; Production Value: On
+; http://php.net/session.upload-progress.cleanup
+;session.upload_progress.cleanup = On
+
+; A prefix used for the upload progress key in $_SESSION
+; Default Value: "upload_progress_"
+; Development Value: "upload_progress_"
+; Production Value: "upload_progress_"
+; http://php.net/session.upload-progress.prefix
+;session.upload_progress.prefix = "upload_progress_"
+
+; The index name (concatenated with the prefix) in $_SESSION
+; containing the upload progress information
+; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
+; http://php.net/session.upload-progress.name
+;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
+
+; How frequently the upload progress should be updated.
+; Given either in percentages (per-file), or in bytes
+; Default Value: "1%"
+; Development Value: "1%"
+; Production Value: "1%"
+; http://php.net/session.upload-progress.freq
+;session.upload_progress.freq =  "1%"
+
+; The minimum delay between updates, in seconds
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.upload-progress.min-freq
+;session.upload_progress.min_freq = "1"
+
+; Only write session data when session data is changed. Enabled by default.
+; http://php.net/session.lazy-write
+;session.lazy_write = On
+
+[Assertion]
+; Switch whether to compile assertions at all (to have no overhead at run-time)
+; -1: Do not compile at all
+;  0: Jump over assertion at run-time
+;  1: Execute assertions
+; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)
+; Default Value: 1
+; Development Value: 1
+; Production Value: -1
+; http://php.net/zend.assertions
+zend.assertions = -1
+
+; Assert(expr); active by default.
+; http://php.net/assert.active
+;assert.active = On
+
+; Throw an AssertationException on failed assertions
+; http://php.net/assert.exception
+;assert.exception = On
+
+; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)
+; http://php.net/assert.warning
+;assert.warning = On
+
+; Don't bail out by default.
+; http://php.net/assert.bail
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+; http://php.net/assert.callback
+;assert.callback = 0
+
+; Eval the expression with current error_reporting().  Set to true if you want
+; error_reporting(0) around the eval().
+; http://php.net/assert.quiet-eval
+;assert.quiet_eval = 0
+
+[COM]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+; http://php.net/com.typelib-file
+;com.typelib_file =
+
+; allow Distributed-COM calls
+; http://php.net/com.allow-dcom
+;com.allow_dcom = true
+
+; autoregister constants of a components typlib on com_load()
+; http://php.net/com.autoregister-typelib
+;com.autoregister_typelib = true
+
+; register constants casesensitive
+; http://php.net/com.autoregister-casesensitive
+;com.autoregister_casesensitive = false
+
+; show warnings on duplicate constant registrations
+; http://php.net/com.autoregister-verbose
+;com.autoregister_verbose = true
+
+; The default character set code-page to use when passing strings to and from COM objects.
+; Default: system ANSI code page
+;com.code_page=
+
+[mbstring]
+; language for internal character representation.
+; This affects mb_send_mail() and mbstring.detect_order.
+; http://php.net/mbstring.language
+;mbstring.language = Japanese
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; internal/script encoding.
+; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;mbstring.internal_encoding =
+
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; http input encoding.
+; mbstring.encoding_traslation = On is needed to use this setting.
+; If empty, default_charset or input_encoding or mbstring.input is used.
+; The precedence is: default_charset < intput_encoding < mbsting.http_input
+; http://php.net/mbstring.http-input
+;mbstring.http_input =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; http output encoding.
+; mb_output_handler must be registered as output buffer to function.
+; If empty, default_charset or output_encoding or mbstring.http_output is used.
+; The precedence is: default_charset < output_encoding < mbstring.http_output
+; To use an output encoding conversion, mbstring's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+; http://php.net/mbstring.http-output
+;mbstring.http_output =
+
+; enable automatic encoding translation according to
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+;       portable libs/applications.
+; http://php.net/mbstring.encoding-translation
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; "auto" detect order is changed according to mbstring.language
+; http://php.net/mbstring.detect-order
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+; http://php.net/mbstring.substitute-character
+;mbstring.substitute_character = none
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+; http://php.net/mbstring.func-overload
+;mbstring.func_overload = 0
+
+; enable strict encoding detection.
+; Default: Off
+;mbstring.strict_detection = On
+
+; This directive specifies the regex pattern of content types for which mb_output_handler()
+; is activated.
+; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
+;mbstring.http_output_conv_mimetype=
+
+[gd]
+; Tell the jpeg decode to ignore warnings and try to create
+; a gd image. The warning will then be displayed as notices
+; disabled by default
+; http://php.net/gd.jpeg-ignore-warning
+;gd.jpeg_ignore_warning = 1
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding
+; is used. For the decode settings you can distinguish between motorola and
+; intel byte order. A decode setting cannot be empty.
+; http://php.net/exif.encode-unicode
+;exif.encode_unicode = ISO-8859-15
+
+; http://php.net/exif.decode-unicode-motorola
+;exif.decode_unicode_motorola = UCS-2BE
+
+; http://php.net/exif.decode-unicode-intel
+;exif.decode_unicode_intel    = UCS-2LE
+
+; http://php.net/exif.encode-jis
+;exif.encode_jis =
+
+; http://php.net/exif.decode-jis-motorola
+;exif.decode_jis_motorola = JIS
+
+; http://php.net/exif.decode-jis-intel
+;exif.decode_jis_intel    = JIS
+
+[Tidy]
+; The path to a default tidy configuration file to use when using tidy
+; http://php.net/tidy.default-config
+;tidy.default_config = /usr/local/lib/php/default.tcfg
+
+; Should tidy clean and repair output automatically?
+; WARNING: Do not use this option if you are generating non-html content
+; such as dynamic images
+; http://php.net/tidy.clean-output
+tidy.clean_output = Off
+
+[soap]
+; Enables or disables WSDL caching feature.
+; http://php.net/soap.wsdl-cache-enabled
+soap.wsdl_cache_enabled=1
+
+; Sets the directory name where SOAP extension will put cache files.
+; http://php.net/soap.wsdl-cache-dir
+soap.wsdl_cache_dir="/tmp"
+
+; (time to live) Sets the number of second while cached file will be used
+; instead of original one.
+; http://php.net/soap.wsdl-cache-ttl
+soap.wsdl_cache_ttl=86400
+
+; Sets the size of the cache limit. (Max. number of WSDL files to cache)
+soap.wsdl_cache_limit = 5
+
+[sysvshm]
+; A default size of the shared memory segment
+;sysvshm.init_mem = 10000
+
+[ldap]
+; Sets the maximum number of open links or -1 for unlimited.
+ldap.max_links = -1
+
+[dba]
+;dba.default_handler=
+
+[opcache]
+; Determines if Zend OPCache is enabled
+;opcache.enable=1
+
+; Determines if Zend OPCache is enabled for the CLI version of PHP
+;opcache.enable_cli=0
+
+; The OPcache shared memory storage size.
+;opcache.memory_consumption=128
+
+; The amount of memory for interned strings in Mbytes.
+;opcache.interned_strings_buffer=8
+
+; The maximum number of keys (scripts) in the OPcache hash table.
+; Only numbers between 200 and 1000000 are allowed.
+;opcache.max_accelerated_files=10000
+
+; The maximum percentage of "wasted" memory until a restart is scheduled.
+;opcache.max_wasted_percentage=5
+
+; When this directive is enabled, the OPcache appends the current working
+; directory to the script key, thus eliminating possible collisions between
+; files with the same name (basename). Disabling the directive improves
+; performance, but may break existing applications.
+;opcache.use_cwd=1
+
+; When disabled, you must reset the OPcache manually or restart the
+; webserver for changes to the filesystem to take effect.
+;opcache.validate_timestamps=1
+
+; How often (in seconds) to check file timestamps for changes to the shared
+; memory storage allocation. ("1" means validate once per second, but only
+; once per request. "0" means always validate)
+;opcache.revalidate_freq=2
+
+; Enables or disables file search in include_path optimization
+;opcache.revalidate_path=0
+
+; If disabled, all PHPDoc comments are dropped from the code to reduce the
+; size of the optimized code.
+;opcache.save_comments=1
+
+; Allow file existence override (file_exists, etc.) performance feature.
+;opcache.enable_file_override=0
+
+; A bitmask, where each bit enables or disables the appropriate OPcache
+; passes
+;opcache.optimization_level=0xffffffff
+
+;opcache.inherited_hack=1
+;opcache.dups_fix=0
+
+; The location of the OPcache blacklist file (wildcards allowed).
+; Each OPcache blacklist file is a text file that holds the names of files
+; that should not be accelerated. The file format is to add each filename
+; to a new line. The filename may be a full path or just a file prefix
+; (i.e., /var/www/x  blacklists all the files and directories in /var/www
+; that start with 'x'). Line starting with a ; are ignored (comments).
+;opcache.blacklist_filename=
+
+; Allows exclusion of large files from being cached. By default all files
+; are cached.
+;opcache.max_file_size=0
+
+; Check the cache checksum each N requests.
+; The default value of "0" means that the checks are disabled.
+;opcache.consistency_checks=0
+
+; How long to wait (in seconds) for a scheduled restart to begin if the cache
+; is not being accessed.
+;opcache.force_restart_timeout=180
+
+; OPcache error_log file name. Empty string assumes "stderr".
+;opcache.error_log=
+
+; All OPcache errors go to the Web server log.
+; By default, only fatal errors (level 0) or errors (level 1) are logged.
+; You can also enable warnings (level 2), info messages (level 3) or
+; debug messages (level 4).
+;opcache.log_verbosity_level=1
+
+; Preferred Shared Memory back-end. Leave empty and let the system decide.
+;opcache.preferred_memory_model=
+
+; Protect the shared memory from unexpected writing during script execution.
+; Useful for internal debugging only.
+;opcache.protect_memory=0
+
+; Allows calling OPcache API functions only from PHP scripts which path is
+; started from specified string. The default "" means no restriction
+;opcache.restrict_api=
+
+; Mapping base of shared memory segments (for Windows only). All the PHP
+; processes have to map shared memory into the same address space. This
+; directive allows to manually fix the "Unable to reattach to base address"
+; errors.
+;opcache.mmap_base=
+
+; Enables and sets the second level cache directory.
+; It should improve performance when SHM memory is full, at server restart or
+; SHM reset. The default "" disables file based caching.
+;opcache.file_cache=
+
+; Enables or disables opcode caching in shared memory.
+;opcache.file_cache_only=0
+
+; Enables or disables checksum validation when script loaded from file cache.
+;opcache.file_cache_consistency_checks=1
+
+; Implies opcache.file_cache_only=1 for a certain process that failed to
+; reattach to the shared memory (for Windows only). Explicitly enabled file
+; cache is required.
+;opcache.file_cache_fallback=1
+
+; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
+; This should improve performance, but requires appropriate OS configuration.
+;opcache.huge_code_pages=1
+
+; Validate cached file permissions.
+;opcache.validate_permission=0
+
+; Prevent name collisions in chroot'ed environment.
+;opcache.validate_root=0
+
+; If specified, it produces opcode dumps for debugging different stages of
+; optimizations.
+;opcache.opt_debug_level=0
+
+[curl]
+; A default value for the CURLOPT_CAINFO option. This is required to be an
+; absolute path.
+;curl.cainfo =
+
+[openssl]
+; The location of a Certificate Authority (CA) file on the local filesystem
+; to use when verifying the identity of SSL/TLS peers. Most users should
+; not specify a value for this directive as PHP will attempt to use the
+; OS-managed cert stores in its absence. If specified, this value may still
+; be overridden on a per-stream basis via the "cafile" SSL stream context
+; option.
+;openssl.cafile=
+
+; If openssl.cafile is not specified or if the CA file is not found, the
+; directory pointed to by openssl.capath is searched for a suitable
+; certificate. This value must be a correctly hashed certificate directory.
+; Most users should not specify a value for this directive as PHP will
+; attempt to use the OS-managed cert stores in its absence. If specified,
+; this value may still be overridden on a per-stream basis via the "capath"
+; SSL stream context option.
+;openssl.capath=
+
+; Local Variables:
+; tab-width: 4
+; End:
diff --git a/rules/php7.in b/rules/php7.in
new file mode 100644
index 000000000..e32efbc6c
--- /dev/null
+++ b/rules/php7.in
@@ -0,0 +1,279 @@
+## SECTION=scripting_languages
+# php configuration
+
+menuconfig PHP7
+	tristate
+	prompt "php7                          "
+	select APACHE2		       if PHP7_SAPI_APXS2 || PHP7_SAPI_APXS2FILTER
+	select LIBCURL		       if PHP7_EXT_CURL
+	select LIBXML2		       if PHP7_XML_LIBXML2
+	select LIBXML2_C14N      if PHP7_XML_LIBXML2
+	select LIBXML2_DTD       if PHP7_XML_LIBXML2
+	select LIBXML2_XINCLUDE	 if PHP7_XML_LIBXML2
+	select LIBXML2_READER	   if PHP7_XML_LIBXML2_READER
+	select LIBXML2_WRITER	   if PHP7_XML_LIBXML2_WRITER
+	select LIBXSLT		       if PHP7_XML_LIBXML2_XSLT
+	select MYSQLDB		       if PHP7_EXT_MYSQL
+	select PHP7_XML		       if PHP7_EXT_SOAP
+	select XMLRPC_C		       if PHP7_XML_LIBXML2_XMLRPC
+	select SQLITE		         if PHP7_EXT_SQLITE3
+	select ZLIB		           if PHP7_EXT_ZLIB
+	select OPENSSL		       if PHP7_EXT_OPENSSL
+
+if PHP7
+
+config PHP7_INI
+	bool
+	prompt "install /etc/php/php.ini"
+	default y
+	help
+	  Installs (if present) the
+	  "./projectroot/etc/php/php.ini" file from your
+	  workspace, otherwise a generic one from the ptxdist
+	  directory.
+
+# ----------------------------------------------------------------------------
+# SAPI Modules
+# ----------------------------------------------------------------------------
+
+choice
+	prompt "SAPI Module"
+	default PHP7_SAPI_NONE
+
+config PHP7_SAPI_APXS2FILTER
+	bool
+	depends on STAGING
+	prompt "apxs2filter"
+	help
+	  EXPERIMENTAL: Build shared Apache 2.0 Filter module. FILE is the optional
+	  pathname to the Apache apxs tool [apxs]
+
+config PHP7_SAPI_APXS2
+	bool
+	depends on STAGING
+	prompt "apache mod_php (apxs2)"
+	help
+	  Build shared Apache 2.0 Handler module.
+
+config PHP7_SAPI_CAUDIUM
+	bool
+	prompt "caudium"
+	depends on BROKEN
+	help
+	  Build PHP as a Pike module for use with Caudium.
+
+config PHP7_SAPI_CONTINUITY
+	bool
+	prompt "continuity"
+	depends on BROKEN
+	help
+	  Build PHP as Continuity Server module.
+
+config PHP7_SAPI_EMBEDDED
+	bool
+	prompt "embedded"
+	help
+	  Enable building of embedded SAPI library.
+
+config PHP7_SAPI_ISAPI
+	bool
+	prompt "isapi"
+	depends on BROKEN
+	help
+	  Build PHP as an ISAPI module for use with Zeus
+
+config PHP7_SAPI_MILTER
+	bool
+	prompt "milter"
+	depends on BROKEN
+	help
+	  Build PHP as Milter application.
+
+config PHP7_SAPI_NSAPI
+	bool
+	prompt "nsapi"
+	depends on BROKEN
+	help
+	  Build PHP as NSAPI module for Netscape/iPlanet/SunONE.
+
+config PHP7_SAPI_PHTTPD
+	bool
+	prompt "phttpd"
+	depends on BROKEN
+	help
+	  Build PHP as phttpd module.
+
+config PHP7_SAPI_PI3WEB
+	bool
+	prompt "pi3web"
+	depends on BROKEN
+	help
+	  Build PHP as Pi3Web module
+
+config PHP7_SAPI_ROXEN
+	bool
+	prompt "roxen"
+	depends on BROKEN
+	help
+	  Build PHP as a Pike module. DIR is the base Roxen
+
+config PHP7_SAPI_ROXEN_ZTS
+	bool
+	prompt "roxen-zts"
+	depends on BROKEN
+	help
+	  Build the Roxen module using Zend Thread Safety.
+
+config PHP7_SAPI_THTTPD
+	bool
+	prompt "thttpd"
+	depends on BROKEN
+	help
+	  Build PHP as thttpd module
+
+config PHP7_SAPI_TUX
+	bool
+	prompt "tux"
+	depends on BROKEN
+	help
+	  Build PHP as a TUX module.
+
+config PHP7_SAPI_WEBJAMES
+	bool
+	prompt "webjames"
+	depends on BROKEN
+	help
+	  Build PHP as a WebJames module (RISC OS only).
+
+config PHP7_SAPI_CGI
+	bool
+	prompt "cgi"
+	help
+	  Build CGI version of PHP.
+
+config PHP7_SAPI_NONE
+	bool
+	prompt "none"
+	select PHP7_SAPI_CLI
+
+endchoice
+
+config PHP7_SAPI_CLI
+	bool
+	prompt "cli"
+	help
+	  Build CLI (commandline interface) version of PHP
+
+# ----------------------------------------------------------------------------
+# General Settings
+# ----------------------------------------------------------------------------
+
+menuconfig PHP7_XML
+	bool
+	prompt "xml support                 "
+	help
+	  Support for XML.
+
+if PHP7_XML
+
+choice
+	prompt "xml library"
+
+	config PHP7_XML_LIBXML2
+		bool "libxml2"
+		help
+		  Use libxml2 as xml backend.
+endchoice
+
+if PHP7_XML_LIBXML2
+
+config PHP7_XML_LIBXML2_READER
+	bool
+	prompt "xml reader support"
+	help
+	  XMLReader support
+
+config PHP7_XML_LIBXML2_WRITER
+	bool
+	select LIBXML2_WRITER
+	prompt "xml writer support"
+	help
+	  XMLWriter support
+
+config PHP7_XML_LIBXML2_DOM
+	bool
+	select LIBXML2_DOM
+	prompt "DOM support"
+	help
+	  libxml2 DOM support
+
+config PHP7_XML_LIBXML2_XSLT
+	bool
+	select PHP7_XML_LIBXML2_DOM
+	prompt "xslt support"
+	help
+	  XMLWriter support
+
+config PHP7_XML_LIBXML2_SIMPLEXML
+	bool
+	prompt "simple xml support"
+	help
+	  simple xml support
+
+config PHP7_XML_LIBXML2_XMLRPC
+	bool
+	depends on STAGING
+	prompt "xmlrpc support"
+	help
+	  xmlrpc support
+
+endif	# PHP7_XML_LIBXML2
+
+endif	# PHP7_XML
+
+# ----------------------------------------------------------------------------
+# Extensions
+# ----------------------------------------------------------------------------
+
+menu "Extensions                  "
+
+config PHP7_EXT_CURL
+	bool
+	prompt "curl"
+	help
+	  Enable CURL support for PHP.
+
+config PHP7_EXT_SOAP
+	bool
+	prompt "soap"
+	select PHP7_XML
+	help
+	  Enable SOAP support for PHP.
+
+config PHP7_EXT_SOCKETS
+	bool
+	prompt "sockets"
+	help
+	  Enable sockets support for PHP.
+
+config PHP7_EXT_SQLITE3
+	bool
+	prompt "sqlite3"
+	help
+	  Enable sqlite3 support for PHP.
+
+config PHP7_EXT_ZLIB
+	bool
+	prompt "zlib"
+	help
+	  Enable zlib support for PHP.
+
+config PHP7_EXT_OPENSSL
+	bool
+	prompt "openssl"
+	help
+	  Enable openssl support for PHP.
+
+endmenu
+
+endif
diff --git a/rules/php7.make b/rules/php7.make
new file mode 100644
index 000000000..1ee91df6a
--- /dev/null
+++ b/rules/php7.make
@@ -0,0 +1,251 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2018 by Diehl Connectivity Solutions GmbH <thorsten.liepert@diehl.com>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_PHP7) += php7
+
+#
+# Paths and names
+#
+PHP7_VERSION	:= 7.3.2
+PHP7_MD5	:= 92a237d2f4075eb00dd2b1f36e71ae4c
+PHP7		:= php-$(PHP7_VERSION)
+PHP7_SUFFIX	:= tar.xz
+PHP7_SOURCE	:= $(SRCDIR)/$(PHP7).$(PHP7_SUFFIX)
+PHP7_DIR	:= $(BUILDDIR)/$(PHP7)
+PHP7_LICENSE	:= PHP License
+
+#
+# Note: older releases are moved to the 'museum', but the 'de.php.net'
+# response with a HTML file instead of the archive. So, try the 'museum'
+# URL first
+#
+PHP7_URL := \
+	http://museum.php.net/php7/$(PHP7).$(PHP7_SUFFIX) \
+	http://de.php.net/distributions/$(PHP7).$(PHP7_SUFFIX) \
+	http://de2.php.net/get/$(PHP7).$(PHP7_SUFFIX)/from/this/mirror \
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+PHP7_CONF_ENV := \
+	$(CROSS_ENV) \
+	ac_cv_prog_cc_cross=yes \
+	ac_cv_c_bigendian_php=$(call ptx/ifdef, PTXCONF_ENDIAN_BIG, yes, no)
+
+#
+# autoconf
+#
+PHP7_AUTOCONF := \
+	$(CROSS_AUTOCONF_USR) \
+	--target= \
+	--disable-phar \
+	--with-config-file-path=/etc/php7 \
+	--enable-opcache=no \
+	--without-iconv \
+	--$(call ptx/endis, PTXCONF_PHP7_SAPI_CLI)-cli \
+	--$(call ptx/endis, PTXCONF_PHP7_SAPI_CGI)-cgi \
+	--$(call ptx/endis, PTXCONF_PHP7_XML)-xml \
+	--$(call ptx/endis, PTXCONF_PHP7_XML_LIBXML2)-libxml \
+	--$(call ptx/endis, PTXCONF_PHP7_XML_LIBXML2_READER)-xmlreader \
+	--$(call ptx/endis, PTXCONF_PHP7_XML_LIBXML2_WRITER)-xmlwriter \
+	--$(call ptx/endis, PTXCONF_PHP7_XML_LIBXML2_DOM)-dom \
+	--$(call ptx/endis, PTXCONF_PHP7_XML_LIBXML2_SIMPLEXML)-simplexml \
+	--$(call ptx/endis, PTXCONF_PHP7_EXT_ZIP)-zip \
+	--$(call ptx/endis, PTXCONF_PHP7_EXT_SOAP)-soap \
+	--$(call ptx/endis, PTXCONF_PHP7_EXT_SOCKETS)-sockets \
+	--$(call ptx/wwo, PTXCONF_PHP7_XML_LIBXML2_XMLRPC)-xmlrpc
+
+# FIXME: php7 doesn't interprete "with_foo=no" correctly, so we cannot
+# give --without-foo options. Should be fixed in php7's configure.in.
+
+# ------------
+# SAPI Modules
+# ------------
+
+ifdef PTXCONF_PHP7_SAPI_APXS2FILTER
+PHP7_AUTOCONF += --with-apxs2filter
+else
+#PHP7_AUTOCONF += --without-apxs2filter
+endif
+
+ifdef PTXCONF_PHP7_SAPI_APXS2
+PHP7_AUTOCONF += --with-apxs2=$(PTXDIST_SYSROOT_TARGET)/usr/bin/apxs
+else
+# PHP7_AUTOCONF += --without-apxs2
+endif
+
+ifdef PTXCONF_PHP7_SAPI_CAUDIUM
+PHP7_AUTOCONF += --with-caudium
+else
+# PHP7_AUTOCONF += --without-caudium
+endif
+
+ifdef PTXCONF_PHP7_SAPI_CONTINUITY
+PHP7_AUTOCONF += --with-continuity
+else
+#PHP7_AUTOCONF += --without-continuity
+endif
+
+ifdef PTXCONF_PHP7_SAPI_EMBEDDED
+PHP7_AUTOCONF += --enable-embed
+else
+#PHP7_AUTOCONF += --disable-embed
+endif
+
+ifdef PTXCONF_PHP7_SAPI_ISAPI
+PHP7_AUTOCONF += --with-isapi
+else
+#PHP7_AUTOCONF += --without-isapi
+endif
+
+ifdef PTXCONF_PHP7_SAPI_MILTER
+PHP7_AUTOCONF += --with-milter
+else
+#PHP7_AUTOCONF += --without-milter
+endif
+
+ifdef PTXCONF_PHP7_SAPI_NSAPI
+PHP7_AUTOCONF += --with-nsapi
+else
+#PHP7_AUTOCONF += --without-nsapi
+endif
+
+ifdef PTXCONF_PHP7_SAPI_PHTTPD
+PHP7_AUTOCONF += --with-phttpd
+else
+#PHP7_AUTOCONF += --without-phttpd
+endif
+
+ifdef PTXCONF_PHP7_SAPI_PI3WEB
+PHP7_AUTOCONF += --with-pi3web
+else
+#PHP7_AUTOCONF += --without-pi3web
+endif
+
+ifdef PTXCONF_PHP7_SAPI_ROXEN
+PHP7_AUTOCONF += --with-roxen
+else
+#PHP7_AUTOCONF += --without-roxen
+endif
+
+ifdef PTXCONF_PHP7_SAPI_ROXEN_ZTS
+PHP7_AUTOCONF += --with-roxen-zts
+else
+#PHP7_AUTOCONF += --without-roxen-zts
+endif
+
+ifdef PTXCONF_PHP7_SAPI_THTTPD
+PHP7_AUTOCONF += --with-thttpd
+else
+#PHP7_AUTOCONF += --without-thttpd
+endif
+
+ifdef PTXCONF_PHP7_SAPI_TUX
+PHP7_AUTOCONF += --with-tux
+else
+#PHP7_AUTOCONF += --without-tux
+endif
+
+# ---------------
+# General Options
+# ---------------
+
+
+ifdef PTXCONF_PHP7_XML_LIBXML2
+PHP7_AUTOCONF += \
+	--with-libxml-dir=$(SYSROOT)/usr
+endif
+
+ifdef PTXCONF_PHP7_XML_LIBXML2_XSLT
+PHP7_AUTOCONF += --with-xsl=$(SYSROOT)/usr
+else
+PHP7_AUTOCONF += --without-xsl
+endif
+
+ifdef PTXCONF_PHP7_EXT_ZLIB
+PHP7_AUTOCONF += --with-zlib=$(SYSROOT)/usr
+else
+PHP7_AUTOCONF += --without-zlib
+endif
+
+ifdef PTXCONF_PHP7_EXT_OPENSSL
+PHP7_AUTOCONF += --with-openssl=$(SYSROOT)/usr
+else
+PHP7_AUTOCONF += --without-openssl
+endif
+
+ifdef PTXCONF_PHP7_EXT_CURL
+PHP7_AUTOCONF += \
+	--with-curl=$(SYSROOT)/usr
+else
+PHP7_AUTOCONF += --without-curl
+endif
+
+ifdef PTXCONF_PHP7_EXT_SQLITE3
+PHP7_AUTOCONF += --with-sqlite3 --with-pdo-sqlite
+# broken config system: sqlite3 (local copy) uses it
+# but it is only linked to if used by external dependencies
+PHP7_CONF_ENV += PHP_LDFLAGS='-ldl -pthread'
+else
+PHP7_AUTOCONF += --without-sqlite3 --without-pdo-sqlite
+endif
+
+ifdef PTXCONF_PHP7_EXT_SHMOP
+PHP7_AUTOCONF += --enable-shmop --enable-sysvsem
+else
+#PHP7_AUTOCONF += --disable-shmop --disable-sysvsem
+endif
+
+ifdef PTXCONF_PHP7_EXT_PEAR
+PHP7_AUTOCONF += --with-pear=FIXME
+else
+PHP7_AUTOCONF += --without-pear
+endif
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/php7.targetinstall:
+	@$(call targetinfo)
+
+	@$(call install_init, php7)
+	@$(call install_fixup, php7,PRIORITY,optional)
+	@$(call install_fixup, php7,SECTION,base)
+	@$(call install_fixup, php7,AUTHOR,"Thorsten Liepert <thorsten.liepert@diehl.com>")
+	@$(call install_fixup, php7,DESCRIPTION,missing)
+
+ifdef PTXCONF_PHP7_SAPI_APXS2
+	@$(call install_copy, php7, 0, 0, 0644, -, \
+		/usr/modules/libphp.so)
+endif
+
+ifdef PTXCONF_PHP7_SAPI_CLI
+	@$(call install_copy, php7, 0, 0, 0755, $(PHP7_PKGDIR)/usr/bin/php, \
+		/usr/bin/php)
+endif
+
+ifdef PTXCONF_PHP7_SAPI_CGI
+	@$(call install_copy, php7, 0, 0, 0755, -, /usr/bin/php-cgi)
+endif
+
+ifdef PTXCONF_PHP7_INI
+	@$(call install_alternative, php7, 0, 102, 0640, /etc/php/php.ini)
+endif
+
+	@$(call install_finish, php7)
+
+	@$(call touch)
+
+# vim: syntax=make
-- 
2.20.1


[-- Attachment #1.1.3: 0002-rules-lighttpd-select-php7-instead-of-php5.patch --]
[-- Type: application/octet-stream, Size: 1021 bytes --]

From 0db690f3180410366c3392499383727a92bef06e Mon Sep 17 00:00:00 2001
From: Thorsten Liepert <thorsten.liepert@diehl.com>
Date: Tue, 16 Oct 2018 13:55:54 +0200
Subject: [PATCH 2/3] rules: lighttpd: select php7 instead of php5

Signed-off-by: Thorsten Liepert <thorsten.liepert@diehl.com>
---
 rules/lighttpd.in | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/rules/lighttpd.in b/rules/lighttpd.in
index 5d2d33034..690bafe89 100644
--- a/rules/lighttpd.in
+++ b/rules/lighttpd.in
@@ -19,7 +19,7 @@ menuconfig LIGHTTPD
 	select LIBMEMCACHED		if LIGHTTPD_MEMCACHED
 	select LUA			if LIGHTTPD_LUA
 	select LUA_INSTALL_LIBLUA	if LIGHTTPD_LUA
-	select PHP5			if LIGHTTPD_MOD_FASTCGI_PHP && RUNTIME
+	select PHP7			if LIGHTTPD_MOD_FASTCGI_PHP && RUNTIME
 	select BUSYBOX_START_STOP_DAEMON			if LIGHTTPD_STARTSCRIPT
 	select BUSYBOX_FEATURE_START_STOP_DAEMON_FANCY		if LIGHTTPD_STARTSCRIPT
 	select BUSYBOX_FEATURE_START_STOP_DAEMON_LONG_OPTIONS	if LIGHTTPD_STARTSCRIPT
-- 
2.20.1


[-- Attachment #1.1.4: 0003-rules-remove-obsolete-package-php5.patch --]
[-- Type: application/octet-stream, Size: 14209 bytes --]

From 1256bd87037a37ee8bd363255bfd4f7365987d6f Mon Sep 17 00:00:00 2001
From: Thorsten Liepert <thorsten.liepert@diehl.com>
Date: Fri, 22 Feb 2019 10:00:58 +0100
Subject: [PATCH 3/3] rules: remove obsolete package php5

Signed-off-by: Thorsten Liepert <thorsten.liepert@diehl.com>
---
 rules/php5.in   | 299 ----------------------------------------------
 rules/php5.make | 308 ------------------------------------------------
 2 files changed, 607 deletions(-)
 delete mode 100644 rules/php5.in
 delete mode 100644 rules/php5.make

diff --git a/rules/php5.in b/rules/php5.in
deleted file mode 100644
index c6bbd0030..000000000
--- a/rules/php5.in
+++ /dev/null
@@ -1,299 +0,0 @@
-## SECTION=scripting_languages
-# php5 configuration
-
-menuconfig PHP5
-	tristate
-	prompt "php5                          "
-	select APACHE2		if PHP5_SAPI_APXS2 || PHP5_SAPI_APXS2FILTER
-	select LIBCURL		if PHP5_EXT_CURL
-	select LIBXML2		if PHP5_XML_LIBXML2
-	select LIBXML2_C14N	if PHP5_XML_LIBXML2
-	select LIBXML2_DTD	if PHP5_XML_LIBXML2
-	select LIBXML2_XINCLUDE	if PHP5_XML_LIBXML2
-	select LIBXML2_READER	if PHP5_XML_LIBXML2_READER
-	select LIBXML2_WRITER	if PHP5_XML_LIBXML2_WRITER
-	select LIBXSLT		if PHP5_XML_LIBXML2_XSLT
-	select MYSQLDB		if PHP5_EXT_MYSQL
-	select PHP5_XML		if PHP5_EXT_SOAP
-	select XMLRPC_C		if PHP5_XML_LIBXML2_XMLRPC
-	select SQLITE		if PHP5_EXT_SQLITE3
-	select ZLIB		if PHP5_EXT_ZLIB
-	select OPENSSL		if PHP5_EXT_OPENSSL
-
-if PHP5
-
-config PHP5_INI
-	bool
-	prompt "install /etc/php5/php.ini"
-	default y
-	help
-	  Installs (if present) the
-	  "./projectroot/etc/php5/php.ini" file from your
-	  workspace, otherwise a generic one from the ptxdist
-	  directory.
-
-# ----------------------------------------------------------------------------
-# SAPI Modules
-# ----------------------------------------------------------------------------
-
-choice
-	prompt "SAPI Module"
-	default PHP5_SAPI_NONE
-
-config PHP5_SAPI_AOLSERVER
-	bool
-	prompt "aolserver"
-	depends on BROKEN
-	help
-	  Use AOLserver.
-
-config PHP5_SAPI_APXS2FILTER
-	bool
-	depends on STAGING
-	prompt "apxs2filter"
-	help
-	  EXPERIMENTAL: Build shared Apache 2.0 Filter module. FILE is the optional
-	  pathname to the Apache apxs tool [apxs]
-
-config PHP5_SAPI_APXS2
-	bool
-	depends on STAGING
-	prompt "apache mod_php (apxs2)"
-	help
-	  Build shared Apache 2.0 Handler module.
-
-config PHP5_SAPI_CAUDIUM
-	bool
-	prompt "caudium"
-	depends on BROKEN
-	help
-	  Build PHP as a Pike module for use with Caudium.
-
-config PHP5_SAPI_CONTINUITY
-	bool
-	prompt "continuity"
-	depends on BROKEN
-	help
-	  Build PHP as Continuity Server module.
-
-config PHP5_SAPI_EMBEDDED
-	bool
-	prompt "embedded"
-	help
-	  Enable building of embedded SAPI library.
-
-config PHP5_SAPI_ISAPI
-	bool
-	prompt "isapi"
-	depends on BROKEN
-	help
-	  Build PHP as an ISAPI module for use with Zeus
-
-config PHP5_SAPI_MILTER
-	bool
-	prompt "milter"
-	depends on BROKEN
-	help
-	  Build PHP as Milter application.
-
-config PHP5_SAPI_NSAPI
-	bool
-	prompt "nsapi"
-	depends on BROKEN
-	help
-	  Build PHP as NSAPI module for Netscape/iPlanet/SunONE.
-
-config PHP5_SAPI_PHTTPD
-	bool
-	prompt "phttpd"
-	depends on BROKEN
-	help
-	  Build PHP as phttpd module.
-
-config PHP5_SAPI_PI3WEB
-	bool
-	prompt "pi3web"
-	depends on BROKEN
-	help
-	  Build PHP as Pi3Web module
-
-config PHP5_SAPI_ROXEN
-	bool
-	prompt "roxen"
-	depends on BROKEN
-	help
-	  Build PHP as a Pike module. DIR is the base Roxen
-
-config PHP5_SAPI_ROXEN_ZTS
-	bool
-	prompt "roxen-zts"
-	depends on BROKEN
-	help
-	  Build the Roxen module using Zend Thread Safety.
-
-config PHP5_SAPI_THTTPD
-	bool
-	prompt "thttpd"
-	depends on BROKEN
-	help
-	  Build PHP as thttpd module
-
-config PHP5_SAPI_TUX
-	bool
-	prompt "tux"
-	depends on BROKEN
-	help
-	  Build PHP as a TUX module.
-
-config PHP5_SAPI_WEBJAMES
-	bool
-	prompt "webjames"
-	depends on BROKEN
-	help
-	  Build PHP as a WebJames module (RISC OS only).
-
-config PHP5_SAPI_CGI
-	bool
-	prompt "cgi"
-	help
-	  Build CGI version of PHP.
-
-config PHP5_SAPI_NONE
-	bool
-	prompt "none"
-	select PHP5_SAPI_CLI
-
-endchoice
-
-config PHP5_SAPI_CLI
-	bool
-	prompt "cli"
-	help
-	  Build CLI (commandline interface) version of PHP
-
-# ----------------------------------------------------------------------------
-# General Settings
-# ----------------------------------------------------------------------------
-
-menuconfig PHP5_XML
-	bool
-	prompt "xml support                 "
-	help
-	  Support for XML.
-
-if PHP5_XML
-
-choice
-	prompt "xml library"
-
-	config PHP5_XML_LIBXML2
-		bool "libxml2"
-		help
-		  Use libxml2 as xml backend.
-endchoice
-
-if PHP5_XML_LIBXML2
-
-config PHP5_XML_LIBXML2_READER
-	bool
-	prompt "xml reader support"
-	help
-	  XMLReader support
-
-config PHP5_XML_LIBXML2_WRITER
-	bool
-	select LIBXML2_WRITER
-	prompt "xml writer support"
-	help
-	  XMLWriter support
-
-config PHP5_XML_LIBXML2_DOM
-	bool
-	select LIBXML2_DOM
-	prompt "DOM support"
-	help
-	  libxml2 DOM support
-
-config PHP5_XML_LIBXML2_XSLT
-	bool
-	select PHP5_XML_LIBXML2_DOM
-	prompt "xslt support"
-	help
-	  XMLWriter support
-
-config PHP5_XML_LIBXML2_SIMPLEXML
-	bool
-	prompt "simple xml support"
-	help
-	  simple xml support
-
-config PHP5_XML_LIBXML2_XMLRPC
-	bool
-	depends on STAGING
-	prompt "xmlrpc support"
-	help
-	  xmlrpc support
-
-endif	# PHP5_XML_LIBXML2
-
-endif	# PHP5_XML
-
-# ----------------------------------------------------------------------------
-# Extensions
-# ----------------------------------------------------------------------------
-
-menu "Extensions                  "
-
-config PHP5_EXT_CURL
-	bool
-	prompt "curl"
-	help
-	  Enable CURL support for PHP.
-
-config PHP5_EXT_MYSQL
-	bool
-	prompt "mysql"
-	help
-	  Enable MySQL database support for PHP.
-
-config PHP5_EXT_SOAP
-	bool
-	prompt "soap"
-	select PHP5_XML
-	help
-	  Enable SOAP support for PHP.
-
-config PHP5_EXT_SOCKETS
-	bool
-	prompt "sockets"
-	help
-	  Enable sockets support for PHP.
-
-config PHP5_EXT_SQLITE3
-	bool
-	prompt "sqlite3"
-	help
-	  Enable sqlite3 support for PHP.
-
-config PHP5_EXT_ZLIB
-	bool
-	prompt "zlib"
-	help
-	  Enable zlib support for PHP.
-
-config PHP5_EXT_OPENSSL
-	bool
-	prompt "openssl"
-	help
-	  Enable openssl support for PHP.
-
-config PHP5_EXT_PEAR
-	bool
-	prompt "pear [BROKEN]"
-	depends on BROKEN
-	help
-	  pear
-
-endmenu
-
-endif
diff --git a/rules/php5.make b/rules/php5.make
deleted file mode 100644
index c6aea8e81..000000000
--- a/rules/php5.make
+++ /dev/null
@@ -1,308 +0,0 @@
-# -*-makefile-*-
-#
-# Copyright (C) 2006-2008 by Robert Schwebel
-#               2009, 2012 by Marc Kleine-Budde <mkl@pengutronix.de>
-#               2015 by Bruno Thomsen <bth@kamstrup.com>
-#
-# See CREDITS for details about who has contributed to this project.
-#
-# For further information about the PTXdist project and license conditions
-# see the README file.
-#
-
-#
-# We provide this package
-#
-PACKAGES-$(PTXCONF_PHP5) += php5
-
-#
-# Paths and names
-#
-PHP5_VERSION	:= 5.5.30
-PHP5_MD5	:= ef6d848756ea9d19b7a7e1a9d824d7c1
-PHP5		:= php-$(PHP5_VERSION)
-PHP5_SUFFIX	:= tar.xz
-PHP5_SOURCE	:= $(SRCDIR)/$(PHP5).$(PHP5_SUFFIX)
-PHP5_DIR	:= $(BUILDDIR)/$(PHP5)
-
-#
-# Note: older releases are moved to the 'museum', but the 'de.php.net'
-# response with a HTML file instead of the archive. So, try the 'museum'
-# URL first
-#
-PHP5_URL := \
-	http://museum.php.net/php5/$(PHP5).$(PHP5_SUFFIX) \
-	http://de.php.net/distributions/$(PHP5).$(PHP5_SUFFIX)
-
-# ----------------------------------------------------------------------------
-# Prepare
-# ----------------------------------------------------------------------------
-
-PHP5_CONF_ENV := \
-	$(CROSS_ENV) \
-	ac_cv_prog_cc_cross=yes \
-	ac_cv_c_bigendian_php=$(call ptx/yesno, PTXCONF_ENDIAN_BIG)
-
-#
-# autoconf
-#
-PHP5_AUTOCONF := \
-	$(CROSS_AUTOCONF_USR) \
-	--disable-phar \
-	--with-config-file-path=/etc/php5 \
-	--enable-opcache=no \
-	--without-iconv
-
-# FIXME: php5 doesn't interprete "with_foo=no" correctly, so we cannot
-# give --without-foo options. Should be fixed in php5's configure.in.
-
-# ------------
-# SAPI Modules
-# ------------
-
-ifdef PTXCONF_PHP5_SAPI_AOLSERVER
-PHP5_AUTOCONF += --with-aolserver=FIXME
-else
-PHP5_AUTOCONF += --without-aolserver
-endif
-
-ifdef PTXCONF_PHP5_SAPI_APXS2FILTER
-PHP5_AUTOCONF += --with-apxs2filter=$(PTXDIST_SYSROOT_TARGET)/usr/bin/apxs
-else
-#PHP5_AUTOCONF += --without-apxs2filter
-endif
-
-ifdef PTXCONF_PHP5_SAPI_APXS2
-PHP5_AUTOCONF += --with-apxs2=$(PTXDIST_SYSROOT_TARGET)/usr/bin/apxs
-else
-# PHP5_AUTOCONF += --without-apxs2
-endif
-
-ifdef PTXCONF_PHP5_SAPI_CAUDIUM
-PHP5_AUTOCONF += --with-caudium
-else
-# PHP5_AUTOCONF += --without-caudium
-endif
-
-ifdef PTXCONF_PHP5_SAPI_CLI
-PHP5_AUTOCONF += --enable-cli
-else
-PHP5_AUTOCONF += --disable-cli
-endif
-
-ifdef PTXCONF_PHP5_SAPI_CONTINUITY
-PHP5_AUTOCONF += --with-continuity
-else
-#PHP5_AUTOCONF += --without-continuity
-endif
-
-ifdef PTXCONF_PHP5_SAPI_EMBEDDED
-PHP5_AUTOCONF += --enable-embed
-else
-#PHP5_AUTOCONF += --disable-embed
-endif
-
-ifdef PTXCONF_PHP5_SAPI_ISAPI
-PHP5_AUTOCONF += --with-isapi
-else
-#PHP5_AUTOCONF += --without-isapi
-endif
-
-ifdef PTXCONF_PHP5_SAPI_MILTER
-PHP5_AUTOCONF += --with-milter
-else
-#PHP5_AUTOCONF += --without-milter
-endif
-
-ifdef PTXCONF_PHP5_SAPI_NSAPI
-PHP5_AUTOCONF += --with-nsapi
-else
-#PHP5_AUTOCONF += --without-nsapi
-endif
-
-ifdef PTXCONF_PHP5_SAPI_PHTTPD
-PHP5_AUTOCONF += --with-phttpd
-else
-#PHP5_AUTOCONF += --without-phttpd
-endif
-
-ifdef PTXCONF_PHP5_SAPI_PI3WEB
-PHP5_AUTOCONF += --with-pi3web
-else
-#PHP5_AUTOCONF += --without-pi3web
-endif
-
-ifdef PTXCONF_PHP5_SAPI_ROXEN
-PHP5_AUTOCONF += --with-roxen
-else
-#PHP5_AUTOCONF += --without-roxen
-endif
-
-ifdef PTXCONF_PHP5_SAPI_ROXEN_ZTS
-PHP5_AUTOCONF += --with-roxen-zts
-else
-#PHP5_AUTOCONF += --without-roxen-zts
-endif
-
-ifdef PTXCONF_PHP5_SAPI_THTTPD
-PHP5_AUTOCONF += --with-thttpd
-else
-#PHP5_AUTOCONF += --without-thttpd
-endif
-
-ifdef PTXCONF_PHP5_SAPI_TUX
-PHP5_AUTOCONF += --with-tux
-else
-#PHP5_AUTOCONF += --without-tux
-endif
-
-ifdef PTXCONF_PHP5_SAPI_CGI
-PHP5_AUTOCONF += --enable-cgi
-else
-PHP5_AUTOCONF += --disable-cgi
-endif
-
-# ---------------
-# General Options
-# ---------------
-
-ifdef PTXCONF_PHP5_XML
-PHP5_AUTOCONF += --enable-xml
-else
-PHP5_AUTOCONF += --disable-xml
-endif
-
-ifdef PTXCONF_PHP5_XML_LIBXML2
-PHP5_AUTOCONF += \
-	--enable-libxml \
-	--with-libxml-dir=$(SYSROOT)/usr
-else
-PHP5_AUTOCONF += --disable-libxml
-endif
-
-ifdef PTXCONF_PHP5_XML_LIBXML2_READER
-PHP5_AUTOCONF += --enable-xmlreader
-else
-PHP5_AUTOCONF += --disable-xmlreader
-endif
-
-ifdef PTXCONF_PHP5_XML_LIBXML2_WRITER
-PHP5_AUTOCONF += --enable-xmlwriter
-else
-PHP5_AUTOCONF += --disable-xmlwriter
-endif
-
-ifdef PTXCONF_PHP5_XML_LIBXML2_DOM
-PHP5_AUTOCONF += --enable-dom
-else
-PHP5_AUTOCONF += --disable-dom
-endif
-
-ifdef PTXCONF_PHP5_XML_LIBXML2_XSLT
-PHP5_AUTOCONF += --with-xsl=$(SYSROOT)/usr
-else
-PHP5_AUTOCONF += --without-xsl
-endif
-
-ifdef PTXCONF_PHP5_XML_LIBXML2_SIMPLEXML
-PHP5_AUTOCONF += --enable-simplexml
-else
-PHP5_AUTOCONF += --disable-simplexml
-endif
-
-ifdef PTXCONF_PHP5_XML_LIBXML2_XMLRPC
-PHP5_AUTOCONF += --with-xmlrpc
-else
-PHP5_AUTOCONF += --without-xmlrpc
-endif
-
-ifdef PTXCONF_PHP5_EXT_ZLIB
-PHP5_AUTOCONF += --with-zlib=$(SYSROOT)/usr
-else
-PHP5_AUTOCONF += --without-zlib
-endif
-
-ifdef PTXCONF_PHP5_EXT_OPENSSL
-PHP5_AUTOCONF += --with-openssl=$(SYSROOT)/usr
-else
-PHP5_AUTOCONF += --without-openssl
-endif
-
-ifdef PTXCONF_PHP5_EXT_CURL
-PHP5_AUTOCONF += \
-	--with-curl=$(SYSROOT)/usr
-else
-PHP5_AUTOCONF += --without-curl
-endif
-
-ifdef PTXCONF_PHP5_EXT_MYSQL
-PHP5_AUTOCONF += \
-	--with-mysql=$(SYSROOT)/usr \
-	--with-pdo-mysql=$(SYSROOT)/usr
-else
-PHP5_AUTOCONF += --without-mysql
-endif
-
-ifdef PTXCONF_PHP5_EXT_SOAP
-PHP5_AUTOCONF += --enable-soap
-else
-PHP5_AUTOCONF += --disable-soap
-endif
-
-ifdef PTXCONF_PHP5_EXT_SOCKETS
-PHP5_AUTOCONF += --enable-sockets
-else
-PHP5_AUTOCONF += --disable-sockets
-endif
-
-ifdef PTXCONF_PHP5_EXT_SQLITE3
-PHP5_AUTOCONF += --with-sqlite3=$(PTXDIST_SYSROOT_TARGET)/usr --with-pdo-sqlite
-# broken config system: sqlite3 (local copy) uses it
-# but it is only linked to if used by external dependencies
-PHP5_CONF_ENV += PHP_LDFLAGS="-ldl -lpthread"
-else
-PHP5_AUTOCONF += --without-sqlite3 --without-pdo-sqlite
-endif
-
-ifdef PTXCONF_PHP5_EXT_PEAR
-PHP5_AUTOCONF += --with-pear=FIXME
-else
-PHP5_AUTOCONF += --without-pear
-endif
-
-# ----------------------------------------------------------------------------
-# Target-Install
-# ----------------------------------------------------------------------------
-
-$(STATEDIR)/php5.targetinstall:
-	@$(call targetinfo)
-
-	@$(call install_init, php5)
-	@$(call install_fixup, php5,PRIORITY,optional)
-	@$(call install_fixup, php5,SECTION,base)
-	@$(call install_fixup, php5,AUTHOR,"Robert Schwebel <r.schwebel@pengutronix.de>")
-	@$(call install_fixup, php5,DESCRIPTION,missing)
-
-ifdef PTXCONF_PHP5_SAPI_APXS2
-	@$(call install_copy, php5, 0, 0, 0644, -, \
-		/usr/modules/libphp5.so)
-endif
-
-ifdef PTXCONF_PHP5_SAPI_CLI
-	@$(call install_copy, php5, 0, 0, 0755, $(PHP5_PKGDIR)/usr/bin/php, \
-		/usr/bin/php5)
-endif
-
-ifdef PTXCONF_PHP5_SAPI_CGI
-	@$(call install_copy, php5, 0, 0, 0755, -, /usr/bin/php-cgi)
-endif
-
-ifdef PTXCONF_PHP5_INI
-	@$(call install_alternative, php5, 0, 0, 0644, /etc/php5/php.ini)
-endif
-
-	@$(call install_finish, php5)
-
-	@$(call touch)
-
-# vim: syntax=make
-- 
2.20.1


[-- Attachment #1.1.5: Type: text/plain, Size: 1786 bytes --]



Thorsten Liepert 
Development Software

Phone +49 911 97479 839 | thorsten.liepert@diehl.com

Diehl Connectivity Solutions GmbH
Stephanstraße 49
90478 Nürnberg
https://www.diehl-cs.com

> Am 22.02.2019 um 09:59 schrieb webmaster@zutroll.de:
> 
> Hello,
> 
> PHP 7.3.2 seems to work well with sqlite, since it uses its own bundeled sqlite3.
> I use with --with-sqlite3, so not specifing any special src.
> 
> I have attached my modified php make file.
> I kept the naming php5.make due limited time, but the target file is now named php instead of php5.
> 
> Hope this helps to getting this working again with ptxdist builded sqlite3.so
> 
> Regards
> 
> 
> 
> Am 2019-02-22 09:28, schrieb Michael Olbrich:
>> Hi,
>> On Mon, Feb 11, 2019 at 03:31:38PM +0100, Simon Agostini wrote:
>>>     is PHP 7.3 suppot planned?
>> I'd be happy to accept patches for this, but I currently don't have plans
>> to do this myself.
>>>     I tried to adapt the PHP5 make file but I get:
>>>     /build-target/php-7.3.2/ext/pdo_sqlite/libsqlite/sqlite3.c', needed by
>>>     'ext/pdo_sqlite/libsqlite/sqlite3.lo'.  Stop.
>>>     with --with-sqlite3=$(PTXDIST_SYSROOT_TARGET)/usr
>>>     if I remove the dir path it works, but I think this shall not be the
>>>     optimal build!?
>> The php5 package is not maintained very well. It has no priority for me and
>> other than the occasional minor version bump, nobody else seems to care
>> either.
>> I'm guessing, that the php build system is broken and there is some mixup
>> about internal vs. system sqlite. Do you get sqlite support at all if you
>> remove --with-sqlite3=...?
>> Michael
> <php5.make>_______________________________________________
> ptxdist mailing list
> ptxdist@pengutronix.de


[-- Attachment #1.2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3899 bytes --]

[-- Attachment #2: Type: text/plain, Size: 91 bytes --]

_______________________________________________
ptxdist mailing list
ptxdist@pengutronix.de

^ permalink raw reply	[flat|nested] 6+ messages in thread
[parent not found: <d548c3cbcb30e579ec8938218ff79876@zutroll.de>]

end of thread, other threads:[~2019-02-22 11:50 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-22 11:50 [ptxdist] PHP7.3 support? Since 5.6.x is End Of Life Thorsten LIEPERT
  -- strict thread matches above, loose matches on Subject: below --
2019-02-22  9:24 Thorsten LIEPERT
2019-02-22 11:39 ` webmaster
     [not found] <d548c3cbcb30e579ec8938218ff79876@zutroll.de>
2019-02-11 14:31 ` Simon Agostini
2019-02-22  8:28   ` Michael Olbrich
2019-02-22  8:59     ` webmaster

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox