Hello

 

Plan to transfer a project from i.MX53-QSB kit and LTIB build system to
TQma53 module using the PTXdist tool.  I managed to create the image for
the SD card based on the BSP supplied with the board (the BSP is not
officially released yet). The original hd.image work fine can boot the
TQ kit. But the image I created directly boot from Linux kernel and
stop on the USB device. The Barebox is not show up on the console log.

 

I did not change the kernel and barebox setting and simple select the
platform and ptx config from the exist one and build. The toolchain is
precompiled. The attached is the log output. Any help please.

 

I just start to use PTXdist.  Try to transfer the LTIB based project to
the new TQma53 module. There could be two ways:  porting the customer
device support (LVDS touch panel, GUI, I2C communication protocol) and
apps to PTXdist again or patch the already working LTIB build with the
TQma53 board level code (u-boot, kernel 2.6.35) and build the project
for the TQ board in LTIB. Which one is more logical and easier to
achieve? Any suggestions?

 

Thanks

 

X Wang

 


Xizhou Wang 
Electronics Engineer

Direct: +44 (0) 1296 634024
Direct Fax: +44 (0)1296 634030
De Soutter Medical Limited Halton Brook Business Park, Weston Road, Aston Clinton, Aylesbury. Bucks HP22 5WF
Tel: +44 (0)1296 634000 Fax: +44 (0)1296 634033 Web: http://www.de-soutter.com/
--------------------------------------------------------------------------
This electronic message contains information from De Soutter Medical Ltd, which may be privileged or confidential and protected by copyright. The information is intended to be for the use of the individual(s) or entity named above. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this email is prohibited and may be unlawful. If you have received this electronic message in error, please notify us by telephone or email immediately.
De Soutter Medical does not authorise any contract to be made using email without our express permission being granted in writing. E-mail communications cannot be guaranteed to be secure or error free, as information could be intercepted corrupted, amended, lost, destroyed, arrive late or incomplete, or contain viruses. We do not accept liability for any such matters or their consequences. Anyone who communicates with us by e-mail is taken to accept the risks in doing so.
De Soutter Medical Ltd. Registered in England No. 3164365.