[DistroKit] [PATCH v2 0/3] Update barebox to newest version

DistroKit Mailinglist
 help / color / mirror / Atom feed

* [DistroKit] [PATCH v2 0/3] Update barebox to newest version
@ 2025-12-02 17:03 Fabian Pflug
  2025-12-02 17:03 ` [DistroKit] [PATCH v2 1/3] v7a: barebox: version bump 2025.06.1 -> 2025.11.0 Fabian Pflug
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Fabian Pflug @ 2025-12-02 17:03 UTC (permalink / raw)
  To: distrokit; +Cc: Fabian Pflug

Updating barebox for the most used platforms to the newest version.

Signed-off-by: Fabian Pflug <f.pflug@pengutronix.de>
---
Changes in v2:
- Remove old patches
- Add patch to fix i.MX93 regression
- Link to v1: https://lore.distrokit.org/distrokit/20251202112849.2046517-1-f.pflug@pengutronix.de/T/#t

---
Fabian Pflug (3):
      v7a: barebox: version bump 2025.06.1 -> 2025.11.0
      v7a_noneon: barebox: version bump 2025.03.0 -> 2025.11.0
      v8a: barebox: version bump 2025.07.0 -> 2025.11.0

 configs/platform-v7a/barebox-am335x-mlo.config     |  158 +-
 configs/platform-v7a/barebox-at91.config           |  213 +-
 configs/platform-v7a/barebox-at91.config.diff      |    8 +-
 configs/platform-v7a/barebox-common.config         |  208 +-
 configs/platform-v7a/barebox.config                |  220 +-
 configs/platform-v7a/platformconfig                |    8 +-
 configs/platform-v7a_noneon/barebox-at91.config    |  242 +-
 .../platform-v7a_noneon/barebox-at91.config.diff   |    8 +-
 configs/platform-v7a_noneon/barebox-common.config  |  241 +-
 .../platform-v7a_noneon/barebox-vexpress.config    |  241 +-
 .../barebox-vexpress.config.diff                   |    4 +-
 ...dd-sama5d3-compatible-after-DT-regression.patch |   41 -
 .../patches/barebox-2025.03.0/series               |    1 -
 configs/platform-v7a_noneon/platformconfig         |    4 +-
 configs/platform-v8a/barebox.config                |  166 +-
 ...on-deep-probe-include-of-for-of_device_id.patch |   30 -
 ...boards-i.MX93-Add-NXP-FRDM-i.MX93-support.patch | 2624 --------------------
 .../platform-v8a/patches/barebox-2025.07.0/series  |    2 -
 .../0001-ARM-i-MX93-reinstate-aliases.patch        |   62 +
 .../platform-v8a/patches/barebox-2025.11.0/series  |    1 +
 configs/platform-v8a/platformconfig                |    4 +-
 ...-vexpress-increase-barebox-partition-size.patch |   74 -
 patches/barebox-2025.06.1/series                   |    4 -
 23 files changed, 1126 insertions(+), 3438 deletions(-)
---
base-commit: be001f7cd0b7a1387aea136b6e60587194c1b562
change-id: 20251202-fpg-barebox_update-9919516e5ff6

Best regards,
-- 
Fabian Pflug <f.pflug@pengutronix.de>




^ permalink raw reply	[flat|nested] 5+ messages in thread

* [DistroKit] [PATCH v2 1/3] v7a: barebox: version bump 2025.06.1 -> 2025.11.0
  2025-12-02 17:03 [DistroKit] [PATCH v2 0/3] Update barebox to newest version Fabian Pflug
@ 2025-12-02 17:03 ` Fabian Pflug
  2025-12-02 17:03 ` [DistroKit] [PATCH v2 2/3] v7a_noneon: barebox: version bump 2025.03.0 " Fabian Pflug
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Fabian Pflug @ 2025-12-02 17:03 UTC (permalink / raw)
  To: distrokit; +Cc: Fabian Pflug

Updating barebox to a current version. Run oldconfig and accepting all
the defaults, except for BOOTM_OFTREE_FALLBACK, where the recommended n
is selected.

Signed-off-by: Fabian Pflug <f.pflug@pengutronix.de>
---
 configs/platform-v7a/barebox-am335x-mlo.config     | 158 +++++++++------
 configs/platform-v7a/barebox-at91.config           | 213 ++++++++++++--------
 configs/platform-v7a/barebox-at91.config.diff      |   8 +-
 configs/platform-v7a/barebox-common.config         | 208 +++++++++++--------
 configs/platform-v7a/barebox.config                | 220 +++++++++++++--------
 configs/platform-v7a/platformconfig                |   8 +-
 ...-vexpress-increase-barebox-partition-size.patch |  74 -------
 patches/barebox-2025.06.1/series                   |   4 -
 8 files changed, 502 insertions(+), 391 deletions(-)

diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
index 80c8955..3815586 100644
--- a/configs/platform-v7a/barebox-am335x-mlo.config
+++ b/configs/platform-v7a/barebox-am335x-mlo.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2025.06.1 Configuration
+# Barebox/arm 2025.11.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARCH_LINUX_NAME="arm"
@@ -28,6 +28,7 @@ CONFIG_ARCH_MULTIARCH=y
 # CONFIG_ARCH_LAYERSCAPE is not set
 CONFIG_ARCH_OMAP_MULTI=y
 # CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_SAMSUNG is not set
 # CONFIG_ARCH_STM32MP is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_VEXPRESS is not set
@@ -74,7 +75,9 @@ CONFIG_32BIT=y
 #
 # CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
 CONFIG_ARM_EXCEPTIONS=y
+# CONFIG_ARM_EXCEPTIONS_PBL is not set
 # CONFIG_ARM_UNWIND is not set
+CONFIG_ARM_MMU_PERMISSIONS=y
 # CONFIG_ARM_SEMIHOSTING is not set
 # CONFIG_ARM_PSCI_CLIENT is not set
 # end of ARM specific settings
@@ -85,9 +88,11 @@ CONFIG_ARM_EXCEPTIONS=y
 # CONFIG_BOARD_GENERIC_DT is not set
 # end of General architecture-dependent options
 
+CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
 CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
 CONFIG_ARCH_HAS_ZERO_PAGE=y
 CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
+CONFIG_HAVE_ARCH_BOOTM_OFTREE=y
 CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
 CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_HAS_DEBUG_LL=y
@@ -105,10 +110,9 @@ CONFIG_FILETYPE=y
 #
 # General Settings
 #
+CONFIG_NAME=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAS_INSECURE_DEFAULTS=y
-CONFIG_INSECURE=y
 CONFIG_BANNER=y
 # CONFIG_MEMINFO is not set
 # CONFIG_ENVIRONMENT_VARIABLES is not set
@@ -137,11 +141,11 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
 CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
 CONFIG_STACK_SIZE=0x8000
 CONFIG_MALLOC_SIZE=0x0
+CONFIG_SCRATCH_SIZE=0x8000
 CONFIG_MALLOC_ALIGNMENT=8
 # end of memory layout
 
 # CONFIG_EXPERIMENTAL is not set
-# CONFIG_MALLOC_DLMALLOC is not set
 CONFIG_MALLOC_TLSF=y
 # CONFIG_MALLOC_DUMMY is not set
 # CONFIG_KALLSYMS is not set
@@ -149,6 +153,7 @@ CONFIG_RELOCATABLE=y
 # CONFIG_PANIC_POWEROFF is not set
 # CONFIG_PANIC_HANG is not set
 CONFIG_PANIC_RESET=y
+# CONFIG_PANIC_TRAP is not set
 CONFIG_PROMPT="MLO>"
 CONFIG_BAUDRATE=115200
 CONFIG_SIMPLE_READLINE=y
@@ -157,7 +162,6 @@ CONFIG_CBSIZE=1024
 # CONFIG_SHELL_SIMPLE is not set
 CONFIG_SHELL_NONE=y
 # CONFIG_GLOB is not set
-# CONFIG_PASSWORD is not set
 # CONFIG_ERRNO_MESSAGES is not set
 # CONFIG_BOOTM is not set
 # CONFIG_BAREBOX_UPDATE is not set
@@ -181,17 +185,13 @@ CONFIG_PARTITION_DISK_DOS=y
 CONFIG_DEFAULT_COMPRESSION_NONE=y
 # CONFIG_POLLER is not set
 # CONFIG_BTHREAD is not set
+# CONFIG_TLV is not set
 # CONFIG_STATE is not set
 # CONFIG_BOOTCHOOSER is not set
 # CONFIG_BOOT_DEFAULTS is not set
 # CONFIG_BAREBOX_DT_2ND is not set
 CONFIG_EXTERNAL_DTS_FRAGMENTS=""
-
-#
-# OP-TEE loading
-#
 CONFIG_FILETYPE_STRINGS=y
-# end of OP-TEE loading
 # end of General Settings
 
 #
@@ -230,6 +230,7 @@ CONFIG_HAVE_EFI_STUB=y
 #
 # Drivers
 #
+# CONFIG_DEEP_PROBE_DEFAULT is not set
 CONFIG_OFTREE=y
 CONFIG_OFTREE_MEM_GENERIC=y
 CONFIG_DTC=y
@@ -265,6 +266,7 @@ CONFIG_DRIVER_SPI_OMAP3=y
 # CONFIG_MTD is not set
 CONFIG_DISK=y
 # CONFIG_DISK_WRITE is not set
+# CONFIG_DM_BLK is not set
 
 #
 # drive types
@@ -287,6 +289,8 @@ CONFIG_MCI=y
 # --- Feature list ---
 #
 # CONFIG_MCI_TUNING is not set
+CONFIG_MCI_STARTUP_NONE=y
+# CONFIG_MCI_STARTUP_NONREMOVABLE is not set
 # CONFIG_MCI_STARTUP is not set
 # CONFIG_MCI_WRITE is not set
 # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
@@ -304,6 +308,7 @@ CONFIG_MCI_OMAP_HSMMC=y
 # CONFIG_MCI_ARASAN is not set
 # CONFIG_MCI_AM654 is not set
 # CONFIG_MCI_SPI is not set
+# CONFIG_MMC_CADENCE_SDHCI is not set
 CONFIG_MCI_OMAP_HSMMC_PBL=y
 # CONFIG_COMMON_CLK is not set
 
@@ -402,6 +407,15 @@ CONFIG_TI_SYSC=y
 # end of Remoteproc drivers
 
 # CONFIG_RESET_CONTROLLER is not set
+CONFIG_HW_HAS_PCI=y
+
+#
+# PCI bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_ECAM_GENERIC is not set
+# end of PCI bus options
+
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -519,8 +533,80 @@ CONFIG_FS_FAT_LFN=y
 #
 # ZSTD support disabled
 #
+# CONFIG_FS_QEMU_FW_CFG is not set
 # end of Filesystem support
 
+#
+# Security options
+#
+CONFIG_INSECURE=y
+# CONFIG_SECURITY_POLICY is not set
+# CONFIG_PASSWORD is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+# CONFIG_BLOBGEN is not set
+
+#
+# OP-TEE loading
+#
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
+
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+
+#
+# Memory initialization
+#
+CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
+# CONFIG_INIT_STACK_NONE is not set
+# CONFIG_INIT_STACK_ALL_PATTERN is not set
+CONFIG_INIT_STACK_ALL_ZERO=y
+# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
+# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
+CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
+# CONFIG_ZERO_CALL_USED_REGS is not set
+# end of Memory initialization
+
+#
+# Buffer overflow protection
+#
+# CONFIG_STACK_GUARD_PAGE is not set
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Buffer overflow protection
+# end of Hardening options
+
+CONFIG_HAS_INSECURE_DEFAULTS=y
+
+#
+# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
+#
+
+#
+# that some of the configured options have potentially insecure defaults.
+#
+
+#
+# Extra care needs to be taken in secure booted systems.
+#
+# end of Security options
+
+#
+# Crypto support
+#
+CONFIG_CRC_ITU_T=y
+# CONFIG_DIGEST is not set
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_ECDSA is not set
+# CONFIG_CRYPTO_BUILTIN_KEYS is not set
+# end of Crypto support
+
 #
 # Library routines
 #
@@ -543,6 +629,7 @@ CONFIG_XYMODEM=y
 # CONFIG_ALLOW_PRNG_FALLBACK is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC8 is not set
+# CONFIG_CRC16 is not set
 
 #
 # Library gui routines
@@ -551,59 +638,8 @@ CONFIG_XYMODEM=y
 
 # CONFIG_BOOTSTRAP is not set
 # CONFIG_NLS is not set
-# CONFIG_BLOBGEN is not set
 # end of Library routines
 
-#
-# Hardening options
-#
-
-#
-# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
-#
-
-#
-# that some of the configured options have potentially insecure defaults.
-#
-
-#
-# Extra care needs to be taken in secure booted systems.
-#
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-
-#
-# Memory initialization
-#
-CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
-# CONFIG_INIT_STACK_NONE is not set
-# CONFIG_INIT_STACK_ALL_PATTERN is not set
-CONFIG_INIT_STACK_ALL_ZERO=y
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
-# CONFIG_ZERO_CALL_USED_REGS is not set
-# end of Memory initialization
-
-# CONFIG_STACK_GUARD_PAGE is not set
-CONFIG_STACKPROTECTOR_NONE=y
-# CONFIG_STACKPROTECTOR_STRONG is not set
-CONFIG_PBL_STACKPROTECTOR_NONE=y
-# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
-# end of Hardening options
-
-#
-# Crypto support
-#
-CONFIG_CRC_ITU_T=y
-# CONFIG_DIGEST is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_ECDSA is not set
-# CONFIG_CRYPTO_BUILTIN_KEYS is not set
-# CONFIG_CRYPTO_KEYSTORE is not set
-# end of Crypto support
-
 #
 # Firmware files
 #
diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
index fc854ed..90557fb 100644
--- a/configs/platform-v7a/barebox-at91.config
+++ b/configs/platform-v7a/barebox-at91.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2025.06.1 Configuration
+# Barebox/arm 2025.11.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARCH_LINUX_NAME="arm"
@@ -76,7 +76,6 @@ CONFIG_MACH_SAMA5D4_WIFX=y
 #
 CONFIG_BOARD_ARM_GENERIC_DT=y
 CONFIG_AEABI=y
-# CONFIG_ARM_BOARD_APPEND_ATAG is not set
 # end of System Type
 
 # CONFIG_64BIT is not set
@@ -87,9 +86,12 @@ CONFIG_32BIT=y
 #
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_EXCEPTIONS=y
+# CONFIG_ARM_EXCEPTIONS_PBL is not set
 CONFIG_ARM_UNWIND=y
+CONFIG_ARM_MMU_PERMISSIONS=y
 # CONFIG_ARM_SEMIHOSTING is not set
 # CONFIG_ARM_PSCI_CLIENT is not set
+# CONFIG_BOOT_ATAGS is not set
 # CONFIG_ARM_BOOTM_ELF is not set
 # CONFIG_ARM_BOOTM_FIP is not set
 # end of ARM specific settings
@@ -101,10 +103,12 @@ CONFIG_BOARD_GENERIC_DT=y
 # CONFIG_BOARD_GENERIC_FIT is not set
 # end of General architecture-dependent options
 
+CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
 CONFIG_ARCH_HAS_STACK_DUMP=y
 CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
 CONFIG_ARCH_HAS_ZERO_PAGE=y
 CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
+CONFIG_HAVE_ARCH_BOOTM_OFTREE=y
 CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
 CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_HAS_DEBUG_LL=y
@@ -135,10 +139,9 @@ CONFIG_FASTBOOT_BASE=y
 #
 # General Settings
 #
+CONFIG_NAME=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAS_INSECURE_DEFAULTS=y
-CONFIG_INSECURE=y
 CONFIG_BANNER=y
 CONFIG_MEMINFO=y
 CONFIG_MEMTEST=y
@@ -169,17 +172,18 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
 CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
 CONFIG_STACK_SIZE=0x8000
 CONFIG_MALLOC_SIZE=0x0
+CONFIG_SCRATCH_SIZE=0x8000
 CONFIG_MALLOC_ALIGNMENT=8
 # end of memory layout
 
 # CONFIG_EXPERIMENTAL is not set
-# CONFIG_MALLOC_DLMALLOC is not set
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
 CONFIG_RELOCATABLE=y
 # CONFIG_PANIC_POWEROFF is not set
 # CONFIG_PANIC_HANG is not set
 CONFIG_PANIC_RESET=y
+# CONFIG_PANIC_TRAP is not set
 CONFIG_PROMPT="barebox:"
 CONFIG_BAUDRATE=115200
 CONFIG_CBSIZE=1024
@@ -194,7 +198,6 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
-# CONFIG_PASSWORD is not set
 CONFIG_ERRNO_MESSAGES=y
 CONFIG_TIMESTAMP=y
 CONFIG_BOOTM=y
@@ -203,6 +206,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y
 CONFIG_BOOTM_OFTREE=y
+# CONFIG_BOOTM_OFTREE_FALLBACK is not set
 CONFIG_BOOTM_UIMAGE=y
 CONFIG_BOOTM_OFTREE_UIMAGE=y
 # CONFIG_BOOTM_AIMAGE is not set
@@ -243,7 +247,9 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
 CONFIG_HAS_SCHED=y
 CONFIG_POLLER=y
+CONFIG_POLLER_WARN_OVERTIME=y
 CONFIG_BTHREAD=y
+# CONFIG_TLV is not set
 CONFIG_STATE=y
 # CONFIG_STATE_CRYPTO is not set
 # CONFIG_STATE_BACKWARD_COMPATIBLE is not set
@@ -252,16 +258,10 @@ CONFIG_BOOT_DEFAULTS=y
 CONFIG_BAREBOX_DT_2ND=y
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SERIAL_NUMBER_FIXUP_SYSTEMD_HOSTNAME is not set
 # CONFIG_SYSTEMD_OF_WATCHDOG is not set
 CONFIG_EXTERNAL_DTS_FRAGMENTS="${PTXDIST_PLATFORMCONFIGDIR}/dts/bootstate.dtsi"
-
-#
-# OP-TEE loading
-#
-# CONFIG_BOOTM_OPTEE is not set
-# CONFIG_PBL_OPTEE is not set
 CONFIG_FILETYPE_STRINGS=y
-# end of OP-TEE loading
 
 #
 # Android Fastboot
@@ -333,6 +333,7 @@ CONFIG_CMD_REGULATOR=y
 # CONFIG_CMD_NVMEM is not set
 # CONFIG_CMD_VARINFO is not set
 CONFIG_CMD_VERSION=y
+# CONFIG_CMD_BFETCH is not set
 # CONFIG_CMD_MMC is not set
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
@@ -373,6 +374,7 @@ CONFIG_CMD_UMOUNT=y
 #
 # Environment
 #
+# CONFIG_CMD_CREATENV is not set
 CONFIG_CMD_NV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_DEFAULTENV=y
@@ -450,7 +452,6 @@ CONFIG_CMD_CLEAR=y
 CONFIG_CMD_ECHO=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_EDIT=y
-# CONFIG_CMD_LOGIN is not set
 CONFIG_CMD_MENU=y
 CONFIG_CMD_MENU_MANAGEMENT=y
 CONFIG_CMD_MENUTREE=y
@@ -495,12 +496,18 @@ CONFIG_CMD_WD=y
 CONFIG_CMD_WD_DEFAULT_TIMOUT=0
 # end of Hardware manipulation
 
+#
+# Security
+#
+# CONFIG_CMD_BLOBGEN is not set
+# CONFIG_CMD_LOGIN is not set
+# end of Security
+
 #
 # Miscellaneous
 #
 # CONFIG_CMD_2048 is not set
 CONFIG_CMD_BAREBOX_UPDATE=y
-# CONFIG_CMD_BLOBGEN is not set
 # CONFIG_CMD_FIRMWARELOAD is not set
 # CONFIG_CMD_KALLSYMS is not set
 CONFIG_CMD_OF_COMPATIBLE=y
@@ -530,10 +537,12 @@ CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
 CONFIG_NET_FASTBOOT=y
+# CONFIG_NET_9P is not set
 
 #
 # Drivers
 #
+# CONFIG_DEEP_PROBE_DEFAULT is not set
 CONFIG_OFTREE=y
 CONFIG_OFTREE_MEM_GENERIC=y
 CONFIG_DTC=y
@@ -584,6 +593,7 @@ CONFIG_DRIVER_NET_MICREL=y
 #
 # MII PHY device drivers
 #
+# CONFIG_ADIN_PHY is not set
 # CONFIG_AR8327N_PHY is not set
 # CONFIG_AT803X_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
@@ -697,6 +707,7 @@ CONFIG_MTD_UBI_FASTMAP=y
 # CONFIG_MTD_UBI_GENERAL_EXTRA_CHECKS is not set
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
+# CONFIG_DM_BLK is not set
 
 #
 # drive types
@@ -733,6 +744,8 @@ CONFIG_MCI=y
 # --- Feature list ---
 #
 # CONFIG_MCI_TUNING is not set
+CONFIG_MCI_STARTUP_NONE=y
+# CONFIG_MCI_STARTUP_NONREMOVABLE is not set
 # CONFIG_MCI_STARTUP is not set
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
@@ -754,6 +767,7 @@ CONFIG_MCI_ATMEL_SDHCI=y
 # CONFIG_MCI_ARASAN is not set
 # CONFIG_MCI_AM654 is not set
 # CONFIG_MCI_SPI is not set
+# CONFIG_MMC_CADENCE_SDHCI is not set
 CONFIG_MCI_ATMEL_SDHCI_PBL=y
 CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
@@ -875,9 +889,15 @@ CONFIG_PINCTRL_AT91PIO4=y
 # end of Pin controllers
 
 CONFIG_NVMEM=y
+CONFIG_NVMEM_LAYOUTS=y
+
+#
+# Layout Types
+#
 # CONFIG_NVMEM_RMEM is not set
 # CONFIG_NVMEM_SNVS_LPGPR is not set
 # CONFIG_EEPROM_93XX46 is not set
+# CONFIG_NVMEM_ATMEL_SHA204A is not set
 
 #
 # Bus devices
@@ -896,6 +916,15 @@ CONFIG_REGULATOR_FIXED=y
 # end of Remoteproc drivers
 
 # CONFIG_RESET_CONTROLLER is not set
+CONFIG_HW_HAS_PCI=y
+
+#
+# PCI bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_ECAM_GENERIC is not set
+# end of PCI bus options
+
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -977,6 +1006,7 @@ CONFIG_ATMEL_EBI=y
 CONFIG_FS=y
 CONFIG_FS_LEGACY=y
 CONFIG_FS_WRITABLE=y
+CONFIG_NETFS_SUPPORT=y
 
 #
 # Some selected filesystems still use the legacy FS API.
@@ -1025,8 +1055,95 @@ CONFIG_FS_UBIFS_COMPRESSION_ZSTD=y
 #
 # ZSTD support disabled
 #
+# CONFIG_FS_QEMU_FW_CFG is not set
 # end of Filesystem support
 
+#
+# Security options
+#
+CONFIG_INSECURE=y
+# CONFIG_SECURITY_POLICY is not set
+# CONFIG_PASSWORD is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+# CONFIG_BLOBGEN is not set
+
+#
+# OP-TEE loading
+#
+# CONFIG_BOOTM_OPTEE is not set
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
+
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+
+#
+# Memory initialization
+#
+CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
+# CONFIG_INIT_STACK_NONE is not set
+# CONFIG_INIT_STACK_ALL_PATTERN is not set
+CONFIG_INIT_STACK_ALL_ZERO=y
+# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
+# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
+CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
+# CONFIG_ZERO_CALL_USED_REGS is not set
+# end of Memory initialization
+
+#
+# Buffer overflow protection
+#
+# CONFIG_STACK_GUARD_PAGE is not set
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Buffer overflow protection
+# end of Hardening options
+
+CONFIG_HAS_INSECURE_DEFAULTS=y
+
+#
+# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
+#
+
+#
+# that some of the configured options have potentially insecure defaults.
+#
+
+#
+# Extra care needs to be taken in secure booted systems.
+#
+# end of Security options
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_DIGEST=y
+CONFIG_HAVE_DIGEST_MD5=y
+CONFIG_HAVE_DIGEST_SHA1=y
+CONFIG_HAVE_DIGEST_SHA224=y
+CONFIG_HAVE_DIGEST_SHA256=y
+# CONFIG_DIGEST_CRC32_GENERIC is not set
+CONFIG_DIGEST_MD5_GENERIC=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+# CONFIG_DIGEST_SHA256_GENERIC is not set
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+# CONFIG_DIGEST_HMAC_GENERIC is not set
+CONFIG_DIGEST_SHA1_ARM=y
+CONFIG_DIGEST_SHA256_ARM=y
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_ECDSA is not set
+# CONFIG_CRYPTO_BUILTIN_KEYS is not set
+# end of Crypto support
+
 #
 # Library routines
 #
@@ -1051,6 +1168,7 @@ CONFIG_LIBFDT=y
 # CONFIG_ALLOW_PRNG_FALLBACK is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC8 is not set
+# CONFIG_CRC16 is not set
 
 #
 # Library gui routines
@@ -1059,74 +1177,9 @@ CONFIG_LIBFDT=y
 
 CONFIG_PRINTF_UUID=y
 CONFIG_NLS=y
-# CONFIG_BLOBGEN is not set
 CONFIG_GENERIC_ALLOCATOR=y
 # end of Library routines
 
-#
-# Hardening options
-#
-
-#
-# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
-#
-
-#
-# that some of the configured options have potentially insecure defaults.
-#
-
-#
-# Extra care needs to be taken in secure booted systems.
-#
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-
-#
-# Memory initialization
-#
-CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
-# CONFIG_INIT_STACK_NONE is not set
-# CONFIG_INIT_STACK_ALL_PATTERN is not set
-CONFIG_INIT_STACK_ALL_ZERO=y
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
-# CONFIG_ZERO_CALL_USED_REGS is not set
-# end of Memory initialization
-
-# CONFIG_STACK_GUARD_PAGE is not set
-CONFIG_STACKPROTECTOR_NONE=y
-# CONFIG_STACKPROTECTOR_STRONG is not set
-CONFIG_PBL_STACKPROTECTOR_NONE=y
-# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
-# end of Hardening options
-
-#
-# Crypto support
-#
-CONFIG_CRC32=y
-CONFIG_DIGEST=y
-CONFIG_HAVE_DIGEST_MD5=y
-CONFIG_HAVE_DIGEST_SHA1=y
-CONFIG_HAVE_DIGEST_SHA224=y
-CONFIG_HAVE_DIGEST_SHA256=y
-# CONFIG_DIGEST_CRC32_GENERIC is not set
-CONFIG_DIGEST_MD5_GENERIC=y
-CONFIG_DIGEST_SHA1_GENERIC=y
-# CONFIG_DIGEST_SHA224_GENERIC is not set
-# CONFIG_DIGEST_SHA256_GENERIC is not set
-# CONFIG_DIGEST_SHA384_GENERIC is not set
-# CONFIG_DIGEST_SHA512_GENERIC is not set
-# CONFIG_DIGEST_HMAC_GENERIC is not set
-CONFIG_DIGEST_SHA1_ARM=y
-CONFIG_DIGEST_SHA256_ARM=y
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_ECDSA is not set
-# CONFIG_CRYPTO_BUILTIN_KEYS is not set
-# CONFIG_CRYPTO_KEYSTORE is not set
-# end of Crypto support
-
 #
 # Firmware files
 #
diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
index 06cf114..2d30350 100644
--- a/configs/platform-v7a/barebox-at91.config.diff
+++ b/configs/platform-v7a/barebox-at91.config.diff
@@ -1,5 +1,5 @@
-580ac4a756d6b0fd89919a94c117d25f
-a113ae91a19f37cefe79fbd73dc0e06f
+b3a232571636cb6a3f5f35122678bb5e
+1e641d2703b309f57bdf1cfbf638172a
 CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_BCM283X is not set
 # CONFIG_ARCH_IMX is undefined
@@ -7,6 +7,7 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_MULTIARCH is not set
 # CONFIG_ARCH_OMAP_MULTI is undefined
 # CONFIG_ARCH_ROCKCHIP is undefined
+# CONFIG_ARCH_SAMSUNG is undefined
 # CONFIG_ARCH_SUNXI is undefined
 # CONFIG_ARM_SECURE_MONITOR is undefined
 # CONFIG_ARM_SMCCC is undefined
@@ -99,6 +100,7 @@ CONFIG_MCI_ATMEL_SDHCI_PBL=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
 CONFIG_MCI_SDHCI=y
 # CONFIG_MCI_STARTUP is not set
+CONFIG_MCI_STARTUP_NONE=y
 CONFIG_MFD_ATMEL_FLEXCOM=y
 CONFIG_MFD_ATMEL_SMC=y
 CONFIG_MFD_SYSCON=y
@@ -126,6 +128,8 @@ CONFIG_NAND_NEED_EXEC_OP=y
 # CONFIG_NET_USB_RTL8152 is undefined
 # CONFIG_NET_USB_SMSC95XX is undefined
 CONFIG_NVMEM=y
+# CONFIG_NVMEM_ATMEL_SHA204A is not set
+CONFIG_NVMEM_LAYOUTS=y
 # CONFIG_NVMEM_REBOOT_MODE is not set
 # CONFIG_NVMEM_RMEM is not set
 # CONFIG_NVMEM_SNVS_LPGPR is not set
diff --git a/configs/platform-v7a/barebox-common.config b/configs/platform-v7a/barebox-common.config
index 540bb67..d33ee4d 100644
--- a/configs/platform-v7a/barebox-common.config
+++ b/configs/platform-v7a/barebox-common.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2025.06.1 Configuration
+# Barebox/arm 2025.11.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARCH_LINUX_NAME="arm"
@@ -28,6 +28,7 @@ CONFIG_ARCH_BCM283X=y
 # CONFIG_ARCH_LAYERSCAPE is not set
 # CONFIG_ARCH_OMAP_MULTI is not set
 # CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_SAMSUNG is not set
 # CONFIG_ARCH_STM32MP is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_VEXPRESS is not set
@@ -59,7 +60,6 @@ CONFIG_MACH_RPI3=y
 CONFIG_BOARD_ARM_GENERIC_DT=y
 CONFIG_AEABI=y
 # CONFIG_THUMB2_BAREBOX is not set
-# CONFIG_ARM_BOARD_APPEND_ATAG is not set
 # end of System Type
 
 # CONFIG_64BIT is not set
@@ -70,11 +70,14 @@ CONFIG_32BIT=y
 #
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_EXCEPTIONS=y
+# CONFIG_ARM_EXCEPTIONS_PBL is not set
 CONFIG_ARM_UNWIND=y
+CONFIG_ARM_MMU_PERMISSIONS=y
 # CONFIG_ARM_SEMIHOSTING is not set
 CONFIG_ARM_SMCCC=y
 CONFIG_ARM_SECURE_MONITOR=y
 # CONFIG_ARM_PSCI_CLIENT is not set
+# CONFIG_BOOT_ATAGS is not set
 # CONFIG_ARM_BOOTM_ELF is not set
 # CONFIG_ARM_BOOTM_FIP is not set
 # end of ARM specific settings
@@ -86,10 +89,12 @@ CONFIG_BOARD_GENERIC_DT=y
 # CONFIG_BOARD_GENERIC_FIT is not set
 # end of General architecture-dependent options
 
+CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
 CONFIG_ARCH_HAS_STACK_DUMP=y
 CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
 CONFIG_ARCH_HAS_ZERO_PAGE=y
 CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
+CONFIG_HAVE_ARCH_BOOTM_OFTREE=y
 CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
 CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_HAS_DEBUG_LL=y
@@ -119,10 +124,9 @@ CONFIG_FASTBOOT_BASE=y
 #
 # General Settings
 #
+CONFIG_NAME=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAS_INSECURE_DEFAULTS=y
-CONFIG_INSECURE=y
 CONFIG_BANNER=y
 CONFIG_MEMINFO=y
 CONFIG_MEMTEST=y
@@ -153,17 +157,18 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
 CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
 CONFIG_STACK_SIZE=0x8000
 CONFIG_MALLOC_SIZE=0x0
+CONFIG_SCRATCH_SIZE=0x8000
 CONFIG_MALLOC_ALIGNMENT=8
 # end of memory layout
 
 # CONFIG_EXPERIMENTAL is not set
-# CONFIG_MALLOC_DLMALLOC is not set
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
 CONFIG_RELOCATABLE=y
 # CONFIG_PANIC_POWEROFF is not set
 # CONFIG_PANIC_HANG is not set
 CONFIG_PANIC_RESET=y
+# CONFIG_PANIC_TRAP is not set
 CONFIG_PROMPT="barebox>"
 CONFIG_BAUDRATE=115200
 CONFIG_CBSIZE=1024
@@ -178,7 +183,6 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
-# CONFIG_PASSWORD is not set
 CONFIG_ERRNO_MESSAGES=y
 CONFIG_TIMESTAMP=y
 CONFIG_BOOTM=y
@@ -187,6 +191,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y
 CONFIG_BOOTM_OFTREE=y
+# CONFIG_BOOTM_OFTREE_FALLBACK is not set
 CONFIG_BOOTM_UIMAGE=y
 # CONFIG_BOOTM_OFTREE_UIMAGE is not set
 # CONFIG_BOOTM_AIMAGE is not set
@@ -227,7 +232,9 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
 CONFIG_HAS_SCHED=y
 CONFIG_POLLER=y
+CONFIG_POLLER_WARN_OVERTIME=y
 CONFIG_BTHREAD=y
+# CONFIG_TLV is not set
 CONFIG_STATE=y
 # CONFIG_STATE_CRYPTO is not set
 # CONFIG_STATE_BACKWARD_COMPATIBLE is not set
@@ -236,16 +243,10 @@ CONFIG_BOOT_DEFAULTS=y
 CONFIG_BAREBOX_DT_2ND=y
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SERIAL_NUMBER_FIXUP_SYSTEMD_HOSTNAME is not set
 # CONFIG_SYSTEMD_OF_WATCHDOG is not set
 CONFIG_EXTERNAL_DTS_FRAGMENTS="${PTXDIST_PLATFORMCONFIGDIR}/dts/bootstate.dtsi"
-
-#
-# OP-TEE loading
-#
-# CONFIG_BOOTM_OPTEE is not set
-# CONFIG_PBL_OPTEE is not set
 CONFIG_FILETYPE_STRINGS=y
-# end of OP-TEE loading
 
 #
 # Android Fastboot
@@ -313,6 +314,7 @@ CONFIG_CMD_BLKSTATS=y
 CONFIG_CMD_REGULATOR=y
 # CONFIG_CMD_VARINFO is not set
 CONFIG_CMD_VERSION=y
+# CONFIG_CMD_BFETCH is not set
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
@@ -350,6 +352,7 @@ CONFIG_CMD_UMOUNT=y
 #
 # Environment
 #
+# CONFIG_CMD_CREATENV is not set
 CONFIG_CMD_NV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_DEFAULTENV=y
@@ -427,7 +430,6 @@ CONFIG_CMD_CLEAR=y
 CONFIG_CMD_ECHO=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_EDIT=y
-# CONFIG_CMD_LOGIN is not set
 CONFIG_CMD_MENU=y
 # CONFIG_CMD_MENU_MANAGEMENT is not set
 CONFIG_CMD_MENUTREE=y
@@ -471,12 +473,18 @@ CONFIG_CMD_WD=y
 CONFIG_CMD_WD_DEFAULT_TIMOUT=0
 # end of Hardware manipulation
 
+#
+# Security
+#
+# CONFIG_CMD_BLOBGEN is not set
+# CONFIG_CMD_LOGIN is not set
+# end of Security
+
 #
 # Miscellaneous
 #
 # CONFIG_CMD_2048 is not set
 CONFIG_CMD_BAREBOX_UPDATE=y
-# CONFIG_CMD_BLOBGEN is not set
 # CONFIG_CMD_FIRMWARELOAD is not set
 # CONFIG_CMD_KALLSYMS is not set
 CONFIG_CMD_OF_COMPATIBLE=y
@@ -506,10 +514,12 @@ CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
 CONFIG_NET_FASTBOOT=y
+# CONFIG_NET_9P is not set
 
 #
 # Drivers
 #
+# CONFIG_DEEP_PROBE_DEFAULT is not set
 CONFIG_OFTREE=y
 CONFIG_OFTREE_MEM_GENERIC=y
 CONFIG_DTC=y
@@ -557,6 +567,7 @@ CONFIG_PHYLIB=y
 #
 # MII PHY device drivers
 #
+# CONFIG_ADIN_PHY is not set
 # CONFIG_AR8327N_PHY is not set
 # CONFIG_AT803X_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
@@ -649,6 +660,7 @@ CONFIG_MTD_OOB_DEVICE=y
 # CONFIG_MTD_UBI is not set
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
+# CONFIG_DM_BLK is not set
 
 #
 # drive types
@@ -695,6 +707,8 @@ CONFIG_MCI=y
 # --- Feature list ---
 #
 # CONFIG_MCI_TUNING is not set
+# CONFIG_MCI_STARTUP_NONE is not set
+# CONFIG_MCI_STARTUP_NONREMOVABLE is not set
 CONFIG_MCI_STARTUP=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
@@ -716,6 +730,7 @@ CONFIG_MCI_MMCI=y
 # CONFIG_MCI_ARASAN is not set
 # CONFIG_MCI_AM654 is not set
 # CONFIG_MCI_SPI is not set
+# CONFIG_MMC_CADENCE_SDHCI is not set
 CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_COMMON_CLK=y
@@ -856,6 +871,15 @@ CONFIG_REGULATOR_BCM283X=y
 # end of Remoteproc drivers
 
 # CONFIG_RESET_CONTROLLER is not set
+CONFIG_HW_HAS_PCI=y
+
+#
+# PCI bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_ECAM_GENERIC is not set
+# end of PCI bus options
+
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -934,6 +958,7 @@ CONFIG_REGULATOR_BCM283X=y
 CONFIG_FS=y
 CONFIG_FS_LEGACY=y
 CONFIG_FS_WRITABLE=y
+CONFIG_NETFS_SUPPORT=y
 
 #
 # Some selected filesystems still use the legacy FS API.
@@ -978,8 +1003,95 @@ CONFIG_FS_FAT_LFN=y
 #
 # ZSTD support disabled
 #
+# CONFIG_FS_QEMU_FW_CFG is not set
 # end of Filesystem support
 
+#
+# Security options
+#
+CONFIG_INSECURE=y
+# CONFIG_SECURITY_POLICY is not set
+# CONFIG_PASSWORD is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+# CONFIG_BLOBGEN is not set
+
+#
+# OP-TEE loading
+#
+# CONFIG_BOOTM_OPTEE is not set
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
+
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+
+#
+# Memory initialization
+#
+CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
+# CONFIG_INIT_STACK_NONE is not set
+# CONFIG_INIT_STACK_ALL_PATTERN is not set
+CONFIG_INIT_STACK_ALL_ZERO=y
+# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
+# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
+CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
+# CONFIG_ZERO_CALL_USED_REGS is not set
+# end of Memory initialization
+
+#
+# Buffer overflow protection
+#
+# CONFIG_STACK_GUARD_PAGE is not set
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Buffer overflow protection
+# end of Hardening options
+
+CONFIG_HAS_INSECURE_DEFAULTS=y
+
+#
+# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
+#
+
+#
+# that some of the configured options have potentially insecure defaults.
+#
+
+#
+# Extra care needs to be taken in secure booted systems.
+#
+# end of Security options
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_DIGEST=y
+CONFIG_HAVE_DIGEST_MD5=y
+CONFIG_HAVE_DIGEST_SHA1=y
+CONFIG_HAVE_DIGEST_SHA224=y
+CONFIG_HAVE_DIGEST_SHA256=y
+# CONFIG_DIGEST_CRC32_GENERIC is not set
+CONFIG_DIGEST_MD5_GENERIC=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+# CONFIG_DIGEST_SHA256_GENERIC is not set
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+# CONFIG_DIGEST_HMAC_GENERIC is not set
+CONFIG_DIGEST_SHA1_ARM=y
+CONFIG_DIGEST_SHA256_ARM=y
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_ECDSA is not set
+# CONFIG_CRYPTO_BUILTIN_KEYS is not set
+# end of Crypto support
+
 #
 # Library routines
 #
@@ -1008,6 +1120,7 @@ CONFIG_LIBFDT=y
 # CONFIG_ALLOW_PRNG_FALLBACK is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC8 is not set
+# CONFIG_CRC16 is not set
 
 #
 # Library gui routines
@@ -1016,73 +1129,8 @@ CONFIG_LIBFDT=y
 
 CONFIG_PRINTF_UUID=y
 CONFIG_NLS=y
-# CONFIG_BLOBGEN is not set
 # end of Library routines
 
-#
-# Hardening options
-#
-
-#
-# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
-#
-
-#
-# that some of the configured options have potentially insecure defaults.
-#
-
-#
-# Extra care needs to be taken in secure booted systems.
-#
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-
-#
-# Memory initialization
-#
-CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
-# CONFIG_INIT_STACK_NONE is not set
-# CONFIG_INIT_STACK_ALL_PATTERN is not set
-CONFIG_INIT_STACK_ALL_ZERO=y
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
-# CONFIG_ZERO_CALL_USED_REGS is not set
-# end of Memory initialization
-
-# CONFIG_STACK_GUARD_PAGE is not set
-CONFIG_STACKPROTECTOR_NONE=y
-# CONFIG_STACKPROTECTOR_STRONG is not set
-CONFIG_PBL_STACKPROTECTOR_NONE=y
-# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
-# end of Hardening options
-
-#
-# Crypto support
-#
-CONFIG_CRC32=y
-CONFIG_DIGEST=y
-CONFIG_HAVE_DIGEST_MD5=y
-CONFIG_HAVE_DIGEST_SHA1=y
-CONFIG_HAVE_DIGEST_SHA224=y
-CONFIG_HAVE_DIGEST_SHA256=y
-# CONFIG_DIGEST_CRC32_GENERIC is not set
-CONFIG_DIGEST_MD5_GENERIC=y
-CONFIG_DIGEST_SHA1_GENERIC=y
-# CONFIG_DIGEST_SHA224_GENERIC is not set
-# CONFIG_DIGEST_SHA256_GENERIC is not set
-# CONFIG_DIGEST_SHA384_GENERIC is not set
-# CONFIG_DIGEST_SHA512_GENERIC is not set
-# CONFIG_DIGEST_HMAC_GENERIC is not set
-CONFIG_DIGEST_SHA1_ARM=y
-CONFIG_DIGEST_SHA256_ARM=y
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_ECDSA is not set
-# CONFIG_CRYPTO_BUILTIN_KEYS is not set
-# CONFIG_CRYPTO_KEYSTORE is not set
-# end of Crypto support
-
 #
 # Firmware files
 #
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
index b2b4b29..cec38e4 100644
--- a/configs/platform-v7a/barebox.config
+++ b/configs/platform-v7a/barebox.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2025.06.1 Configuration
+# Barebox/arm 2025.11.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARCH_LINUX_NAME="arm"
@@ -30,6 +30,7 @@ CONFIG_ARCH_IMX=y
 # CONFIG_ARCH_LAYERSCAPE is not set
 CONFIG_ARCH_OMAP_MULTI=y
 # CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_SAMSUNG is not set
 CONFIG_ARCH_STM32MP=y
 # CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_VEXPRESS=y
@@ -213,8 +214,6 @@ CONFIG_MACH_VEXPRESS=y
 CONFIG_BOARD_ARM_GENERIC_DT=y
 CONFIG_AEABI=y
 CONFIG_THUMB2_BAREBOX=y
-CONFIG_ARM_BOARD_APPEND_ATAG=y
-# CONFIG_ARM_BOARD_PREPEND_ATAG is not set
 # end of System Type
 
 # CONFIG_64BIT is not set
@@ -225,12 +224,15 @@ CONFIG_32BIT=y
 #
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_EXCEPTIONS=y
+# CONFIG_ARM_EXCEPTIONS_PBL is not set
 CONFIG_ARM_UNWIND=y
+CONFIG_ARM_MMU_PERMISSIONS=y
 # CONFIG_ARM_SEMIHOSTING is not set
 CONFIG_ARM_SMCCC=y
 CONFIG_ARM_SECURE_MONITOR=y
 CONFIG_ARM_PSCI_OF=y
 CONFIG_ARM_PSCI_CLIENT=y
+# CONFIG_BOOT_ATAGS is not set
 # CONFIG_ARM_BOOTM_ELF is not set
 # CONFIG_ARM_BOOTM_FIP is not set
 # end of ARM specific settings
@@ -242,10 +244,12 @@ CONFIG_BOARD_GENERIC_DT=y
 # CONFIG_BOARD_GENERIC_FIT is not set
 # end of General architecture-dependent options
 
+CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
 CONFIG_ARCH_HAS_STACK_DUMP=y
 CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
 CONFIG_ARCH_HAS_ZERO_PAGE=y
 CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
+CONFIG_HAVE_ARCH_BOOTM_OFTREE=y
 CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
 CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_HAS_DEBUG_LL=y
@@ -276,10 +280,9 @@ CONFIG_FASTBOOT_BASE=y
 #
 # General Settings
 #
+CONFIG_NAME=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAS_INSECURE_DEFAULTS=y
-CONFIG_INSECURE=y
 CONFIG_BANNER=y
 CONFIG_MEMINFO=y
 CONFIG_MEMTEST=y
@@ -311,17 +314,18 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
 CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
 CONFIG_STACK_SIZE=0x8000
 CONFIG_MALLOC_SIZE=0x0
+CONFIG_SCRATCH_SIZE=0x8000
 CONFIG_MALLOC_ALIGNMENT=8
 # end of memory layout
 
 # CONFIG_EXPERIMENTAL is not set
-# CONFIG_MALLOC_DLMALLOC is not set
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
 CONFIG_RELOCATABLE=y
 # CONFIG_PANIC_POWEROFF is not set
 # CONFIG_PANIC_HANG is not set
 CONFIG_PANIC_RESET=y
+# CONFIG_PANIC_TRAP is not set
 CONFIG_PROMPT="barebox> "
 CONFIG_BAUDRATE=115200
 CONFIG_CBSIZE=1024
@@ -336,7 +340,6 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
-# CONFIG_PASSWORD is not set
 CONFIG_ERRNO_MESSAGES=y
 # CONFIG_TIMESTAMP is not set
 CONFIG_BOOTM=y
@@ -345,6 +348,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y
 CONFIG_BOOTM_OFTREE=y
+# CONFIG_BOOTM_OFTREE_FALLBACK is not set
 CONFIG_BOOTM_UIMAGE=y
 CONFIG_BOOTM_OFTREE_UIMAGE=y
 # CONFIG_BOOTM_AIMAGE is not set
@@ -386,7 +390,9 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_DFU=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
 CONFIG_HAS_SCHED=y
 CONFIG_POLLER=y
+CONFIG_POLLER_WARN_OVERTIME=y
 CONFIG_BTHREAD=y
+# CONFIG_TLV is not set
 CONFIG_STATE=y
 # CONFIG_STATE_CRYPTO is not set
 # CONFIG_STATE_BACKWARD_COMPATIBLE is not set
@@ -395,18 +401,10 @@ CONFIG_BOOT_DEFAULTS=y
 CONFIG_BAREBOX_DT_2ND=y
 CONFIG_RESET_SOURCE=y
 CONFIG_MACHINE_ID=y
+# CONFIG_SERIAL_NUMBER_FIXUP_SYSTEMD_HOSTNAME is not set
 # CONFIG_SYSTEMD_OF_WATCHDOG is not set
 CONFIG_EXTERNAL_DTS_FRAGMENTS="${PTXDIST_PLATFORMCONFIGDIR}/dts/bootstate.dtsi"
-
-#
-# OP-TEE loading
-#
-CONFIG_HAVE_OPTEE=y
-CONFIG_OPTEE_SIZE=0x03000000
-CONFIG_OPTEE_SHM_SIZE=0x400000
-# CONFIG_BOOTM_OPTEE is not set
 CONFIG_FILETYPE_STRINGS=y
-# end of OP-TEE loading
 
 #
 # Android Fastboot
@@ -478,6 +476,7 @@ CONFIG_CMD_REGULATOR=y
 # CONFIG_CMD_NVMEM is not set
 # CONFIG_CMD_VARINFO is not set
 CONFIG_CMD_VERSION=y
+# CONFIG_CMD_BFETCH is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_MMC_EXTCSD=y
 # CONFIG_CMD_POLLER is not set
@@ -518,6 +517,7 @@ CONFIG_CMD_UMOUNT=y
 #
 # Environment
 #
+# CONFIG_CMD_CREATENV is not set
 CONFIG_CMD_NV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_DEFAULTENV=y
@@ -595,7 +595,6 @@ CONFIG_CMD_CLEAR=y
 CONFIG_CMD_ECHO=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_EDIT=y
-# CONFIG_CMD_LOGIN is not set
 CONFIG_CMD_MENU=y
 CONFIG_CMD_MENU_MANAGEMENT=y
 CONFIG_CMD_MENUTREE=y
@@ -646,15 +645,21 @@ CONFIG_CMD_WD=y
 CONFIG_CMD_WD_DEFAULT_TIMOUT=0
 # end of Hardware manipulation
 
+#
+# Security
+#
+# CONFIG_CMD_BLOBGEN is not set
+# CONFIG_CMD_KEYSTORE is not set
+# CONFIG_CMD_LOGIN is not set
+# end of Security
+
 #
 # Miscellaneous
 #
 # CONFIG_CMD_2048 is not set
 CONFIG_CMD_BAREBOX_UPDATE=y
-# CONFIG_CMD_BLOBGEN is not set
 # CONFIG_CMD_FIRMWARELOAD is not set
 # CONFIG_CMD_KALLSYMS is not set
-# CONFIG_CMD_KEYSTORE is not set
 CONFIG_CMD_OF_COMPATIBLE=y
 CONFIG_CMD_OF_DIFF=y
 CONFIG_CMD_OF_DUMP=y
@@ -684,10 +689,12 @@ CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
 CONFIG_NET_FASTBOOT=y
+# CONFIG_NET_9P is not set
 
 #
 # Drivers
 #
+# CONFIG_DEEP_PROBE_DEFAULT is not set
 CONFIG_REGMAP_FORMATTED=y
 CONFIG_REGMAP_I2C=y
 CONFIG_OFTREE=y
@@ -748,6 +755,7 @@ CONFIG_DRIVER_NET_SMC911X=y
 #
 # MII PHY device drivers
 #
+# CONFIG_ADIN_PHY is not set
 # CONFIG_AR8327N_PHY is not set
 CONFIG_AT803X_PHY=y
 # CONFIG_DAVICOM_PHY is not set
@@ -888,6 +896,7 @@ CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_DISK=y
 CONFIG_DISK_IDE_SFF=y
 CONFIG_DISK_WRITE=y
+# CONFIG_DM_BLK is not set
 
 #
 # drive types
@@ -944,6 +953,7 @@ CONFIG_VIDEO=y
 # CONFIG_DRIVER_VIDEO_FB_SSD1307 is not set
 CONFIG_VIDEO_VPL=y
 # CONFIG_DRIVER_VIDEO_STM32_LTDC is not set
+# CONFIG_DRIVER_VIDEO_STM32_DSI is not set
 # CONFIG_DRIVER_VIDEO_BCM283X is not set
 # CONFIG_DRIVER_VIDEO_ROCKCHIP is not set
 CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
@@ -966,6 +976,7 @@ CONFIG_DRIVER_VIDEO_SIMPLEFB=y
 # CONFIG_DRIVER_VIDEO_PANEL_SITRONIX_ST7789V is not set
 # CONFIG_DRIVER_VIDEO_PANEL_MIPI_DBI is not set
 # CONFIG_DRIVER_VIDEO_DW_HDMI is not set
+# CONFIG_DRIVER_VIDEO_DW_MIPI_DSI is not set
 # CONFIG_SOUND is not set
 CONFIG_MCI_SDHCI=y
 CONFIG_MCI=y
@@ -974,6 +985,8 @@ CONFIG_MCI=y
 # --- Feature list ---
 #
 # CONFIG_MCI_TUNING is not set
+# CONFIG_MCI_STARTUP_NONE is not set
+# CONFIG_MCI_STARTUP_NONREMOVABLE is not set
 CONFIG_MCI_STARTUP=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
@@ -999,6 +1012,7 @@ CONFIG_MCI_MMCI=y
 # CONFIG_MCI_AM654 is not set
 # CONFIG_MCI_SPI is not set
 CONFIG_MCI_STM32_SDMMC2=y
+# CONFIG_MMC_CADENCE_SDHCI is not set
 CONFIG_MCI_OMAP_HSMMC_PBL=y
 CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
@@ -1154,6 +1168,11 @@ CONFIG_PINCTRL_STM32=y
 # end of Pin controllers
 
 CONFIG_NVMEM=y
+CONFIG_NVMEM_LAYOUTS=y
+
+#
+# Layout Types
+#
 # CONFIG_NVMEM_RMEM is not set
 # CONFIG_NVMEM_SNVS_LPGPR is not set
 CONFIG_IMX_OCOTP=y
@@ -1162,6 +1181,7 @@ CONFIG_IMX_OCOTP=y
 CONFIG_STM32_BSEC=y
 CONFIG_STM32_BSEC_WRITE=y
 CONFIG_STM32_BSEC_OPTEE_TA=y
+# CONFIG_NVMEM_ATMEL_SHA204A is not set
 
 #
 # Bus devices
@@ -1195,6 +1215,7 @@ CONFIG_RESET_CONTROLLER=y
 CONFIG_RESET_SIMPLE=y
 # CONFIG_RESET_IMX7 is not set
 CONFIG_RESET_SCMI=y
+# CONFIG_RESET_SOCFPGA32 is not set
 CONFIG_HW_HAS_PCI=y
 
 #
@@ -1302,6 +1323,7 @@ CONFIG_OF_FIXUP_OPTEE=y
 CONFIG_FS=y
 CONFIG_FS_LEGACY=y
 CONFIG_FS_WRITABLE=y
+CONFIG_NETFS_SUPPORT=y
 
 #
 # Some selected filesystems still use the legacy FS API.
@@ -1350,8 +1372,100 @@ CONFIG_FS_UBIFS_COMPRESSION_ZSTD=y
 #
 # ZSTD support disabled
 #
+# CONFIG_FS_QEMU_FW_CFG is not set
 # end of Filesystem support
 
+#
+# Security options
+#
+CONFIG_INSECURE=y
+# CONFIG_SECURITY_POLICY is not set
+# CONFIG_PASSWORD is not set
+CONFIG_CRYPTO_KEYSTORE=y
+# CONFIG_BLOBGEN is not set
+
+#
+# OP-TEE loading
+#
+CONFIG_HAVE_OPTEE=y
+CONFIG_OPTEE_SIZE=0x03000000
+CONFIG_OPTEE_SHM_SIZE=0x400000
+# CONFIG_BOOTM_OPTEE is not set
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
+
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+
+#
+# Memory initialization
+#
+CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
+# CONFIG_INIT_STACK_NONE is not set
+# CONFIG_INIT_STACK_ALL_PATTERN is not set
+CONFIG_INIT_STACK_ALL_ZERO=y
+# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
+# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
+CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
+# CONFIG_ZERO_CALL_USED_REGS is not set
+# end of Memory initialization
+
+#
+# Buffer overflow protection
+#
+# CONFIG_STACK_GUARD_PAGE is not set
+CONFIG_STACKPROTECTOR=y
+# CONFIG_STACKPROTECTOR_NONE is not set
+CONFIG_STACKPROTECTOR_STRONG=y
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Buffer overflow protection
+# end of Hardening options
+
+CONFIG_HAS_INSECURE_DEFAULTS=y
+
+#
+# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
+#
+
+#
+# that some of the configured options have potentially insecure defaults.
+#
+
+#
+# Extra care needs to be taken in secure booted systems.
+#
+# end of Security options
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_DIGEST=y
+CONFIG_HAVE_DIGEST_MD5=y
+CONFIG_HAVE_DIGEST_SHA1=y
+CONFIG_HAVE_DIGEST_SHA224=y
+CONFIG_HAVE_DIGEST_SHA256=y
+CONFIG_HAVE_DIGEST_HMAC=y
+# CONFIG_DIGEST_CRC32_GENERIC is not set
+CONFIG_DIGEST_MD5_GENERIC=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+# CONFIG_DIGEST_SHA256_GENERIC is not set
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+CONFIG_DIGEST_HMAC_GENERIC=y
+CONFIG_DIGEST_SHA1_ARM=y
+CONFIG_DIGEST_SHA256_ARM=y
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_ECDSA is not set
+# CONFIG_CRYPTO_BUILTIN_KEYS is not set
+# end of Crypto support
+
 #
 # Library routines
 #
@@ -1386,6 +1500,7 @@ CONFIG_LIBFDT=y
 CONFIG_ALLOW_PRNG_FALLBACK=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC8=y
+# CONFIG_CRC16 is not set
 
 #
 # Library gui routines
@@ -1401,76 +1516,9 @@ CONFIG_LODEPNG=y
 # CONFIG_BAREBOX_LOGO is not set
 CONFIG_PRINTF_UUID=y
 CONFIG_NLS=y
-# CONFIG_BLOBGEN is not set
 CONFIG_IDR=y
 # end of Library routines
 
-#
-# Hardening options
-#
-
-#
-# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
-#
-
-#
-# that some of the configured options have potentially insecure defaults.
-#
-
-#
-# Extra care needs to be taken in secure booted systems.
-#
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-
-#
-# Memory initialization
-#
-CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
-# CONFIG_INIT_STACK_NONE is not set
-# CONFIG_INIT_STACK_ALL_PATTERN is not set
-CONFIG_INIT_STACK_ALL_ZERO=y
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
-# CONFIG_ZERO_CALL_USED_REGS is not set
-# end of Memory initialization
-
-# CONFIG_STACK_GUARD_PAGE is not set
-CONFIG_STACKPROTECTOR=y
-# CONFIG_STACKPROTECTOR_NONE is not set
-CONFIG_STACKPROTECTOR_STRONG=y
-CONFIG_PBL_STACKPROTECTOR_NONE=y
-# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
-# end of Hardening options
-
-#
-# Crypto support
-#
-CONFIG_CRC32=y
-CONFIG_DIGEST=y
-CONFIG_HAVE_DIGEST_MD5=y
-CONFIG_HAVE_DIGEST_SHA1=y
-CONFIG_HAVE_DIGEST_SHA224=y
-CONFIG_HAVE_DIGEST_SHA256=y
-CONFIG_HAVE_DIGEST_HMAC=y
-# CONFIG_DIGEST_CRC32_GENERIC is not set
-CONFIG_DIGEST_MD5_GENERIC=y
-CONFIG_DIGEST_SHA1_GENERIC=y
-# CONFIG_DIGEST_SHA224_GENERIC is not set
-# CONFIG_DIGEST_SHA256_GENERIC is not set
-# CONFIG_DIGEST_SHA384_GENERIC is not set
-# CONFIG_DIGEST_SHA512_GENERIC is not set
-CONFIG_DIGEST_HMAC_GENERIC=y
-CONFIG_DIGEST_SHA1_ARM=y
-CONFIG_DIGEST_SHA256_ARM=y
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_ECDSA is not set
-# CONFIG_CRYPTO_BUILTIN_KEYS is not set
-CONFIG_CRYPTO_KEYSTORE=y
-# end of Crypto support
-
 #
 # Firmware files
 #
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index d044ceb..a2aa6f6 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -185,18 +185,18 @@ PTXCONF_AT91BOOTSTRAP2_MD5="ef321a80bf428bfd6cb642c96126ef6c"
 PTXCONF_AT91BOOTSTRAP2_CONFIG="at91bootstrap-wifx-l1.config"
 PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
 PTXCONF_BAREBOX_COMMON=y
-PTXCONF_BAREBOX_COMMON_VERSION="2025.06.1"
-PTXCONF_BAREBOX_COMMON_MD5="b2ba4b194894fb6c4848d260f4e849ff"
+PTXCONF_BAREBOX_COMMON_VERSION="2025.11.0"
+PTXCONF_BAREBOX_COMMON_MD5="867dea758c6ea8b350bac57009235e88"
 PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
 PTXCONF_BAREBOX_AM335X_MLO=y
 PTXCONF_BAREBOX_AT91=y
 PTXCONF_BAREBOX_ARCH_STRING="arm"
 PTXCONF_BAREBOX_DEPENDENCIES=y
 PTXCONF_BAREBOX=y
-PTXCONF_BAREBOX_VERSION="2025.06.1"
+PTXCONF_BAREBOX_VERSION="2025.11.0"
 PTXCONF_BAREBOX_CONFIG_BUILDSYSTEM_VERSION=y
 PTXCONF_BAREBOX_BUILDSYSTEM_VERSION="${PTXDIST_VCS_VERSION}"
-PTXCONF_BAREBOX_MD5="b2ba4b194894fb6c4848d260f4e849ff"
+PTXCONF_BAREBOX_MD5="867dea758c6ea8b350bac57009235e88"
 PTXCONF_BAREBOX_CONFIG="barebox.config"
 # PTXCONF_BAREBOX_FIRMWARE is not set
 PTXCONF_BAREBOX_EXTRA_ENV=y
diff --git a/patches/barebox-2025.06.1/0001-ARM-vexpress-increase-barebox-partition-size.patch b/patches/barebox-2025.06.1/0001-ARM-vexpress-increase-barebox-partition-size.patch
deleted file mode 100644
index db5d400..0000000
--- a/patches/barebox-2025.06.1/0001-ARM-vexpress-increase-barebox-partition-size.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Ahmad Fatoum <a.fatoum@pengutronix.de>
-Date: Tue, 24 Jun 2025 20:39:30 +0200
-Subject: [PATCH] ARM: vexpress: increase barebox partition size
-
-Commit 3630fa400be5 ("ARM: remove vexpress_defconfig") made
-multi_v7_defconfig the go-to defconfig for vexpress.
-
-The multi defconfig enables a lot of drivers and functionality though
-increasing the image size from 300K to 1.2M, which causes barebox to
-extend beyond the previously configured 512K barebox partition.
-
-Fix this by giving each of barebox and its environment 2M of space,
-which should be enough for many years to come.
-
-Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
-[rhi: picked from https://lore.barebox.org/barebox/20250624183930.2733353-1-a.fatoum@pengutronix.de/ ]
-Signed-off-by: Roland Hieber <rhi@pengutronix.de>
----
- arch/arm/dts/vexpress-v2p-ca15.dts | 11 ++++++++---
- arch/arm/dts/vexpress-v2p-ca9.dts  | 10 +++++-----
- 2 files changed, 13 insertions(+), 8 deletions(-)
-
-diff --git a/arch/arm/dts/vexpress-v2p-ca15.dts b/arch/arm/dts/vexpress-v2p-ca15.dts
-index acf4e023d5cd..891e6dbbe4b4 100644
---- a/arch/arm/dts/vexpress-v2p-ca15.dts
-+++ b/arch/arm/dts/vexpress-v2p-ca15.dts
-@@ -19,12 +19,17 @@ partitions {
- 
- 		partition@0 {
- 			label = "barebox";
--			reg = <0x0 0x80000>;
-+			reg = <0x0 0x200000>;
- 		};
- 
--		barebox_env: partition@80000 {
-+		barebox_env: partition@200000 {
- 			label = "barebox-environment";
--			reg = <0x80000 0x80000>;
-+			reg = <0x200000 0x200000>;
-+		};
-+
-+		state_storage: partition@400000 {
-+			label = "barebox-state";
-+			reg = <0x400000 0x100000>;
- 		};
- 	};
- };
-diff --git a/arch/arm/dts/vexpress-v2p-ca9.dts b/arch/arm/dts/vexpress-v2p-ca9.dts
-index d1484ff4b0a9..c320f67c2371 100644
---- a/arch/arm/dts/vexpress-v2p-ca9.dts
-+++ b/arch/arm/dts/vexpress-v2p-ca9.dts
-@@ -77,17 +77,17 @@ partitions {
- 
- 		partition@0 {
- 			label = "barebox";
--			reg = <0x0 0x80000>;
-+			reg = <0x0 0x200000>;
- 		};
- 
--		barebox_env: partition@80000 {
-+		barebox_env: partition@200000 {
- 			label = "barebox-environment";
--			reg = <0x80000 0x80000>;
-+			reg = <0x200000 0x200000>;
- 		};
- 
--		state_storage: partition@100000 {
-+		state_storage: partition@400000 {
- 			label = "barebox-state";
--			reg = <0x100000 0x100000>;
-+			reg = <0x400000 0x100000>;
- 		};
- 	};
- };
diff --git a/patches/barebox-2025.06.1/series b/patches/barebox-2025.06.1/series
deleted file mode 100644
index e04bbe5..0000000
--- a/patches/barebox-2025.06.1/series
+++ /dev/null
@@ -1,4 +0,0 @@
-# generated by git-ptx-patches
-#tag:base --start-number 1
-0001-ARM-vexpress-increase-barebox-partition-size.patch
-# 292dd68941cabc5983505876cd411f46  - git-ptx-patches magic

-- 
2.47.3




^ permalink raw reply	[flat|nested] 5+ messages in thread

* [DistroKit] [PATCH v2 2/3] v7a_noneon: barebox: version bump 2025.03.0 -> 2025.11.0
  2025-12-02 17:03 [DistroKit] [PATCH v2 0/3] Update barebox to newest version Fabian Pflug
  2025-12-02 17:03 ` [DistroKit] [PATCH v2 1/3] v7a: barebox: version bump 2025.06.1 -> 2025.11.0 Fabian Pflug
@ 2025-12-02 17:03 ` Fabian Pflug
  2025-12-02 17:03 ` [DistroKit] [PATCH v2 3/3] v8a: barebox: version bump 2025.07.0 " Fabian Pflug
  2025-12-03 17:38 ` [DistroKit] [PATCH v2 0/3] Update barebox to newest version Robert Schwebel
  3 siblings, 0 replies; 5+ messages in thread
From: Fabian Pflug @ 2025-12-02 17:03 UTC (permalink / raw)
  To: distrokit; +Cc: Fabian Pflug

Updating barebox to a current version. Run oldconfig and accepting all
the defaults, except for BOOTM_OFTREE_FALLBACK, where the recommended n
is selected.

Signed-off-by: Fabian Pflug <f.pflug@pengutronix.de>
---
 configs/platform-v7a_noneon/barebox-at91.config    | 242 +++++++++++++--------
 .../platform-v7a_noneon/barebox-at91.config.diff   |   8 +-
 configs/platform-v7a_noneon/barebox-common.config  | 241 ++++++++++++--------
 .../platform-v7a_noneon/barebox-vexpress.config    | 241 ++++++++++++--------
 .../barebox-vexpress.config.diff                   |   4 +-
 ...dd-sama5d3-compatible-after-DT-regression.patch |  41 ----
 .../patches/barebox-2025.03.0/series               |   1 -
 configs/platform-v7a_noneon/platformconfig         |   4 +-
 8 files changed, 456 insertions(+), 326 deletions(-)

diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config
index 3ada1fb..c2c7130 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config
+++ b/configs/platform-v7a_noneon/barebox-at91.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2025.03.0 Configuration
+# Barebox/arm 2025.11.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARCH_LINUX_NAME="arm"
@@ -43,7 +43,7 @@ CONFIG_HAVE_AT91_USB_CLK=y
 CONFIG_COMMON_CLK_AT91=y
 CONFIG_HAVE_AT91_SMD=y
 CONFIG_HAVE_AT91_DDRAMC=y
-CONFIG_AT91_MCI_PBL=y
+CONFIG_AT91_PBL=y
 CONFIG_AT91SAM9_SMC=y
 CONFIG_HAVE_AT91SAM9_RST=y
 CONFIG_SOC_SAM_V7=y
@@ -71,7 +71,6 @@ CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y
 #
 CONFIG_BOARD_ARM_GENERIC_DT=y
 CONFIG_AEABI=y
-# CONFIG_ARM_BOARD_APPEND_ATAG is not set
 # end of System Type
 
 # CONFIG_64BIT is not set
@@ -82,13 +81,16 @@ CONFIG_32BIT=y
 #
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_EXCEPTIONS=y
+# CONFIG_ARM_EXCEPTIONS_PBL is not set
 CONFIG_ARM_UNWIND=y
+CONFIG_ARM_MMU_PERMISSIONS=y
 # CONFIG_ARM_SEMIHOSTING is not set
 # CONFIG_ARM_PSCI_CLIENT is not set
+# CONFIG_BOOT_ATAGS is not set
+# CONFIG_ARM_BOOTM_ELF is not set
+# CONFIG_ARM_BOOTM_FIP is not set
 # end of ARM specific settings
 
-CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
-
 #
 # General architecture-dependent options
 #
@@ -96,15 +98,23 @@ CONFIG_BOARD_GENERIC_DT=y
 # CONFIG_BOARD_GENERIC_FIT is not set
 # end of General architecture-dependent options
 
+CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+CONFIG_ARCH_HAS_ZERO_PAGE=y
+CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
+CONFIG_HAVE_ARCH_BOOTM_OFTREE=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_ARCH_HAS_SJLJ=y
+CONFIG_HAS_DEBUG_LL=y
+CONFIG_HAVE_ARCH_KASAN=y
 CONFIG_CC_IS_GCC=y
 CONFIG_GCC_VERSION=140201
 CONFIG_CLANG_VERSION=0
 CONFIG_GREGORIAN_CALENDER=y
 CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
-CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
@@ -113,6 +123,7 @@ CONFIG_BINFMT=y
 CONFIG_UIMAGE=y
 CONFIG_LOGBUF=y
 CONFIG_STDDEV=y
+CONFIG_CDEV_ALIAS=y
 CONFIG_UBIFORMAT=y
 CONFIG_BOOT=y
 CONFIG_FASTBOOT_BASE=y
@@ -120,10 +131,9 @@ CONFIG_FASTBOOT_BASE=y
 #
 # General Settings
 #
+CONFIG_NAME=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAS_INSECURE_DEFAULTS=y
-CONFIG_INSECURE=y
 CONFIG_BANNER=y
 CONFIG_MEMINFO=y
 CONFIG_ENVIRONMENT_VARIABLES=y
@@ -152,18 +162,18 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
 CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
 CONFIG_STACK_SIZE=0x8000
 CONFIG_MALLOC_SIZE=0x0
+CONFIG_SCRATCH_SIZE=0x8000
 CONFIG_MALLOC_ALIGNMENT=8
 # end of memory layout
 
 # CONFIG_EXPERIMENTAL is not set
-# CONFIG_MALLOC_DLMALLOC is not set
 CONFIG_MALLOC_TLSF=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
 CONFIG_KALLSYMS=y
 CONFIG_RELOCATABLE=y
 # CONFIG_PANIC_POWEROFF is not set
 # CONFIG_PANIC_HANG is not set
 CONFIG_PANIC_RESET=y
+# CONFIG_PANIC_TRAP is not set
 CONFIG_PROMPT="barebox:"
 CONFIG_BAUDRATE=115200
 CONFIG_CBSIZE=1024
@@ -177,7 +187,6 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
-# CONFIG_PASSWORD is not set
 CONFIG_ERRNO_MESSAGES=y
 CONFIG_TIMESTAMP=y
 CONFIG_BOOTM=y
@@ -186,13 +195,14 @@ CONFIG_BOOTM_SHOW_TYPE=y
 # CONFIG_BOOTM_VERBOSE is not set
 CONFIG_BOOTM_INITRD=y
 CONFIG_BOOTM_OFTREE=y
+# CONFIG_BOOTM_OFTREE_FALLBACK is not set
 # CONFIG_BOOTM_UIMAGE is not set
 # CONFIG_BOOTM_AIMAGE is not set
-# CONFIG_BOOTM_ELF is not set
 # CONFIG_BOOTM_FITIMAGE is not set
 CONFIG_BOOTM_OPTIONAL_SIGNED_IMAGES=y
 CONFIG_BLSPEC=y
 CONFIG_FLEXIBLE_BOOTARGS=y
+CONFIG_ROOTWAIT_BOOTARG=y
 CONFIG_MMCBLKDEV_ROOTARG=y
 CONFIG_BAREBOX_UPDATE=y
 CONFIG_SYSTEM_PARTITIONS=y
@@ -223,19 +233,18 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
 CONFIG_HAS_SCHED=y
 CONFIG_POLLER=y
+CONFIG_POLLER_WARN_OVERTIME=y
 CONFIG_BTHREAD=y
+# CONFIG_TLV is not set
 # CONFIG_STATE is not set
 # CONFIG_BOOTCHOOSER is not set
+CONFIG_BOOT_DEFAULTS=y
+CONFIG_BAREBOX_DT_2ND=y
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SERIAL_NUMBER_FIXUP_SYSTEMD_HOSTNAME is not set
 CONFIG_EXTERNAL_DTS_FRAGMENTS=""
-
-#
-# OP-TEE loading
-#
-# CONFIG_BOOTM_OPTEE is not set
-# CONFIG_PBL_OPTEE is not set
-# end of OP-TEE loading
+CONFIG_FILETYPE_STRINGS=y
 
 #
 # Android Fastboot
@@ -250,7 +259,6 @@ CONFIG_FASTBOOT_CMD_OEM=y
 #
 CONFIG_COMPILE_LOGLEVEL=6
 CONFIG_DEFAULT_LOGLEVEL=6
-CONFIG_HAS_DEBUG_LL=y
 # CONFIG_DEBUG_LL is not set
 CONFIG_DEBUG_AT91_UART_BASE=0xffffee00
 # CONFIG_DEBUG_INITCALLS is not set
@@ -262,7 +270,6 @@ CONFIG_DEBUG_AT91_UART_BASE=0xffffee00
 # CONFIG_PBL_BREAK is not set
 # CONFIG_PRINTF_FULL is not set
 # CONFIG_UBSAN is not set
-CONFIG_HAVE_ARCH_KASAN=y
 CONFIG_CC_HAS_KASAN_GENERIC=y
 # CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
@@ -306,7 +313,9 @@ CONFIG_CMD_MEMINFO=y
 # CONFIG_CMD_ARM_MMUINFO is not set
 # CONFIG_CMD_BLKSTATS is not set
 # CONFIG_CMD_REGULATOR is not set
+# CONFIG_CMD_VARINFO is not set
 CONFIG_CMD_VERSION=y
+# CONFIG_CMD_BFETCH is not set
 # CONFIG_CMD_MMC is not set
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
@@ -346,6 +355,7 @@ CONFIG_CMD_UMOUNT=y
 #
 # Environment
 #
+# CONFIG_CMD_CREATENV is not set
 CONFIG_CMD_NV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_DEFAULTENV=y
@@ -371,6 +381,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+CONFIG_CMD_TREE=y
 # CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
@@ -381,6 +392,7 @@ CONFIG_CMD_RMDIR=y
 CONFIG_CMD_SHA1SUM=y
 # CONFIG_CMD_SHA224SUM is not set
 # CONFIG_CMD_SHA256SUM is not set
+# CONFIG_CMD_BASE64 is not set
 # CONFIG_CMD_SHA384SUM is not set
 # CONFIG_CMD_SHA512SUM is not set
 # CONFIG_CMD_FIPTOOL is not set
@@ -409,6 +421,7 @@ CONFIG_NET_CMD_IFUP=y
 # CONFIG_CMD_MIITOOL is not set
 CONFIG_CMD_PING=y
 # CONFIG_CMD_TFTP is not set
+# CONFIG_CMD_IP is not set
 CONFIG_CMD_IP_ROUTE_GET=y
 # CONFIG_CMD_ETHLOG is not set
 # end of Network
@@ -420,7 +433,6 @@ CONFIG_CMD_CLEAR=y
 CONFIG_CMD_ECHO=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_EDIT=y
-# CONFIG_CMD_LOGIN is not set
 # CONFIG_CMD_MENU is not set
 # CONFIG_CMD_MENUTREE is not set
 CONFIG_CMD_READLINE=y
@@ -447,6 +459,7 @@ CONFIG_CMD_MW=y
 #
 # CONFIG_CMD_CLK is not set
 CONFIG_CMD_DETECT=y
+# CONFIG_CMD_TRUNCATE is not set
 # CONFIG_CMD_SYNC is not set
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_GPIO=y
@@ -462,12 +475,18 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_USBGADGET=y
 # end of Hardware manipulation
 
+#
+# Security
+#
+# CONFIG_CMD_BLOBGEN is not set
+# CONFIG_CMD_LOGIN is not set
+# end of Security
+
 #
 # Miscellaneous
 #
 # CONFIG_CMD_2048 is not set
 CONFIG_CMD_BAREBOX_UPDATE=y
-# CONFIG_CMD_BLOBGEN is not set
 # CONFIG_CMD_FIRMWARELOAD is not set
 # CONFIG_CMD_KALLSYMS is not set
 # CONFIG_CMD_OF_COMPATIBLE is not set
@@ -491,17 +510,18 @@ CONFIG_CMD_TIME=y
 # end of Commands
 
 CONFIG_NET=y
-CONFIG_NET_NFS=y
 # CONFIG_NET_NETCONSOLE is not set
 CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
 CONFIG_NET_FASTBOOT=y
+# CONFIG_NET_9P is not set
 
 #
 # Drivers
 #
+# CONFIG_DEEP_PROBE_DEFAULT is not set
 CONFIG_REGMAP_FORMATTED=y
 CONFIG_REGMAP_I2C=y
 CONFIG_REGMAP_SPI=y
@@ -554,6 +574,7 @@ CONFIG_DRIVER_NET_MICREL=y
 #
 # MII PHY device drivers
 #
+# CONFIG_ADIN_PHY is not set
 # CONFIG_AR8327N_PHY is not set
 # CONFIG_AT803X_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
@@ -676,6 +697,7 @@ CONFIG_MTD_UBI_BEB_LIMIT=20
 # CONFIG_MTD_UBI_GENERAL_EXTRA_CHECKS is not set
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
+# CONFIG_DM_BLK is not set
 
 #
 # drive types
@@ -703,7 +725,7 @@ CONFIG_USB_OHCI_AT91=y
 # USB Miscellaneous drivers
 #
 # CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_ONBOARD_HUB is not set
+# CONFIG_USB_ONBOARD_DEV is not set
 # CONFIG_TYPEC_TUSB320 is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DUALSPEED=y
@@ -727,12 +749,15 @@ CONFIG_MCI=y
 # --- Feature list ---
 #
 # CONFIG_MCI_TUNING is not set
+CONFIG_MCI_STARTUP_NONE=y
+# CONFIG_MCI_STARTUP_NONREMOVABLE is not set
 # CONFIG_MCI_STARTUP is not set
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 CONFIG_MCI_ERASE=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
 # CONFIG_MCI_MMC_GPP_PARTITIONS is not set
+# CONFIG_MCI_MMC_RPMB is not set
 
 #
 # --- MCI host drivers ---
@@ -747,6 +772,7 @@ CONFIG_MCI_ATMEL_SDHCI=y
 # CONFIG_MCI_ARASAN is not set
 # CONFIG_MCI_AM654 is not set
 # CONFIG_MCI_SPI is not set
+# CONFIG_MMC_CADENCE_SDHCI is not set
 CONFIG_MCI_ATMEL_PBL=y
 CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
@@ -795,7 +821,7 @@ CONFIG_MFD_ATMEL_SMC=y
 # CONFIG_SRAM is not set
 CONFIG_DEV_MEM=y
 # CONFIG_UBOOTVAR is not set
-# CONFIG_STORAGE_BY_UUID is not set
+# CONFIG_STORAGE_BY_ALIAS is not set
 # end of Misc devices
 
 CONFIG_LED=y
@@ -896,6 +922,15 @@ CONFIG_REGULATOR_FIXED=y
 # end of Remoteproc drivers
 
 # CONFIG_RESET_CONTROLLER is not set
+CONFIG_HW_HAS_PCI=y
+
+#
+# PCI bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_ECAM_GENERIC is not set
+# end of PCI bus options
+
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -977,6 +1012,7 @@ CONFIG_VIRTIO_MENU=y
 CONFIG_FS=y
 CONFIG_FS_LEGACY=y
 CONFIG_FS_WRITABLE=y
+CONFIG_NETFS_SUPPORT=y
 
 #
 # Some selected filesystems still use the legacy FS API.
@@ -1025,8 +1061,93 @@ CONFIG_FS_UBIFS_COMPRESSION_ZSTD=y
 #
 # ZSTD support disabled
 #
+# CONFIG_FS_QEMU_FW_CFG is not set
 # end of Filesystem support
 
+#
+# Security options
+#
+CONFIG_INSECURE=y
+# CONFIG_SECURITY_POLICY is not set
+# CONFIG_PASSWORD is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+# CONFIG_BLOBGEN is not set
+
+#
+# OP-TEE loading
+#
+# CONFIG_BOOTM_OPTEE is not set
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
+
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+
+#
+# Memory initialization
+#
+CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
+# CONFIG_INIT_STACK_NONE is not set
+# CONFIG_INIT_STACK_ALL_PATTERN is not set
+CONFIG_INIT_STACK_ALL_ZERO=y
+# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
+# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
+CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
+# CONFIG_ZERO_CALL_USED_REGS is not set
+# end of Memory initialization
+
+#
+# Buffer overflow protection
+#
+CONFIG_STACK_GUARD_PAGE=y
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Buffer overflow protection
+# end of Hardening options
+
+CONFIG_HAS_INSECURE_DEFAULTS=y
+
+#
+# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
+#
+
+#
+# that some of the configured options have potentially insecure defaults.
+#
+
+#
+# Extra care needs to be taken in secure booted systems.
+#
+# end of Security options
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_DIGEST=y
+CONFIG_HAVE_DIGEST_MD5=y
+CONFIG_HAVE_DIGEST_SHA1=y
+# CONFIG_DIGEST_CRC32_GENERIC is not set
+CONFIG_DIGEST_MD5_GENERIC=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+# CONFIG_DIGEST_SHA256_GENERIC is not set
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+# CONFIG_DIGEST_HMAC_GENERIC is not set
+CONFIG_DIGEST_SHA1_ARM=y
+# CONFIG_DIGEST_SHA256_ARM is not set
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_ECDSA is not set
+# CONFIG_CRYPTO_BUILTIN_KEYS is not set
+# end of Crypto support
+
 #
 # Library routines
 #
@@ -1053,6 +1174,7 @@ CONFIG_LIBFDT=y
 # CONFIG_ALLOW_PRNG_FALLBACK is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC8 is not set
+# CONFIG_CRC16 is not set
 
 #
 # Library gui routines
@@ -1061,75 +1183,9 @@ CONFIG_LIBFDT=y
 
 CONFIG_PRINTF_UUID=y
 CONFIG_NLS=y
-# CONFIG_BLOBGEN is not set
-CONFIG_ARCH_HAS_STACK_DUMP=y
-CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
-CONFIG_ARCH_HAS_ZERO_PAGE=y
 CONFIG_GENERIC_ALLOCATOR=y
 # end of Library routines
 
-#
-# Hardening options
-#
-
-#
-# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
-#
-
-#
-# that some of the configured options have potentially insecure defaults.
-#
-
-#
-# Extra care needs to be in secure booted systems.
-#
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-
-#
-# Memory initialization
-#
-CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
-# CONFIG_INIT_STACK_NONE is not set
-# CONFIG_INIT_STACK_ALL_PATTERN is not set
-CONFIG_INIT_STACK_ALL_ZERO=y
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
-# CONFIG_ZERO_CALL_USED_REGS is not set
-# end of Memory initialization
-
-CONFIG_STACK_GUARD_PAGE=y
-CONFIG_STACKPROTECTOR_NONE=y
-# CONFIG_STACKPROTECTOR_STRONG is not set
-CONFIG_PBL_STACKPROTECTOR_NONE=y
-# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
-# end of Hardening options
-
-#
-# Crypto support
-#
-CONFIG_CRC32=y
-CONFIG_DIGEST=y
-CONFIG_HAVE_DIGEST_MD5=y
-CONFIG_HAVE_DIGEST_SHA1=y
-# CONFIG_DIGEST_CRC32_GENERIC is not set
-CONFIG_DIGEST_MD5_GENERIC=y
-CONFIG_DIGEST_SHA1_GENERIC=y
-# CONFIG_DIGEST_SHA224_GENERIC is not set
-# CONFIG_DIGEST_SHA256_GENERIC is not set
-# CONFIG_DIGEST_SHA384_GENERIC is not set
-# CONFIG_DIGEST_SHA512_GENERIC is not set
-# CONFIG_DIGEST_HMAC_GENERIC is not set
-CONFIG_DIGEST_SHA1_ARM=y
-# CONFIG_DIGEST_SHA256_ARM is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_ECDSA is not set
-# CONFIG_CRYPTO_BUILTIN_KEYS is not set
-# CONFIG_CRYPTO_KEYSTORE is not set
-# end of Crypto support
-
 #
 # Firmware files
 #
diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff
index 85d5349..a4a2996 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config.diff
+++ b/configs/platform-v7a_noneon/barebox-at91.config.diff
@@ -1,5 +1,5 @@
-6f44517b962a1e868fa0f03b89d5c450
-9c961b64873047307df764511e587103
+93f609b06d41c861931fd2c0592a536f
+104ee59d52fec1bfcec398bb406c648b
 CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_BCM283X is not set
 # CONFIG_ARCH_IMX is undefined
@@ -7,12 +7,13 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_MULTIARCH is not set
 # CONFIG_ARCH_OMAP_MULTI is undefined
 # CONFIG_ARCH_ROCKCHIP is undefined
+# CONFIG_ARCH_SAMSUNG is undefined
 # CONFIG_ARCH_SUNXI is undefined
 # CONFIG_ARM_SECURE_MONITOR is undefined
 # CONFIG_ARM_SMCCC is undefined
 CONFIG_AT91SAM9_SMC=y
-CONFIG_AT91_MCI_PBL=y
 CONFIG_AT91_MULTI_BOARDS=y
+CONFIG_AT91_PBL=y
 CONFIG_ATMEL_EBI=y
 CONFIG_BCH=y
 CONFIG_BITREV=y
@@ -118,6 +119,7 @@ CONFIG_MCI_ATMEL_SDHCI=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
 CONFIG_MCI_SDHCI=y
 # CONFIG_MCI_STARTUP is not set
+CONFIG_MCI_STARTUP_NONE=y
 # CONFIG_MEMTEST is undefined
 # CONFIG_MENUTREE is undefined
 CONFIG_MFD_ATMEL_SMC=y
diff --git a/configs/platform-v7a_noneon/barebox-common.config b/configs/platform-v7a_noneon/barebox-common.config
index f87b574..f5bb978 100644
--- a/configs/platform-v7a_noneon/barebox-common.config
+++ b/configs/platform-v7a_noneon/barebox-common.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2025.03.0 Configuration
+# Barebox/arm 2025.11.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARCH_LINUX_NAME="arm"
@@ -28,6 +28,7 @@ CONFIG_ARCH_BCM283X=y
 # CONFIG_ARCH_LAYERSCAPE is not set
 # CONFIG_ARCH_OMAP_MULTI is not set
 # CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_SAMSUNG is not set
 # CONFIG_ARCH_STM32MP is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_VEXPRESS is not set
@@ -59,7 +60,6 @@ CONFIG_MACH_RPI3=y
 CONFIG_BOARD_ARM_GENERIC_DT=y
 CONFIG_AEABI=y
 # CONFIG_THUMB2_BAREBOX is not set
-# CONFIG_ARM_BOARD_APPEND_ATAG is not set
 # end of System Type
 
 # CONFIG_64BIT is not set
@@ -70,15 +70,18 @@ CONFIG_32BIT=y
 #
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_EXCEPTIONS=y
+# CONFIG_ARM_EXCEPTIONS_PBL is not set
 CONFIG_ARM_UNWIND=y
+CONFIG_ARM_MMU_PERMISSIONS=y
 # CONFIG_ARM_SEMIHOSTING is not set
 CONFIG_ARM_SMCCC=y
 CONFIG_ARM_SECURE_MONITOR=y
 # CONFIG_ARM_PSCI_CLIENT is not set
+# CONFIG_BOOT_ATAGS is not set
+# CONFIG_ARM_BOOTM_ELF is not set
+# CONFIG_ARM_BOOTM_FIP is not set
 # end of ARM specific settings
 
-CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
-
 #
 # General architecture-dependent options
 #
@@ -86,15 +89,23 @@ CONFIG_BOARD_GENERIC_DT=y
 # CONFIG_BOARD_GENERIC_FIT is not set
 # end of General architecture-dependent options
 
+CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+CONFIG_ARCH_HAS_ZERO_PAGE=y
+CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
+CONFIG_HAVE_ARCH_BOOTM_OFTREE=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_ARCH_HAS_SJLJ=y
+CONFIG_HAS_DEBUG_LL=y
+CONFIG_HAVE_ARCH_KASAN=y
 CONFIG_CC_IS_GCC=y
 CONFIG_GCC_VERSION=140201
 CONFIG_CLANG_VERSION=0
 CONFIG_GREGORIAN_CALENDER=y
 CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
-CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
@@ -103,6 +114,7 @@ CONFIG_BINFMT=y
 CONFIG_UIMAGE=y
 CONFIG_LOGBUF=y
 CONFIG_STDDEV=y
+CONFIG_CDEV_ALIAS=y
 CONFIG_MENUTREE=y
 CONFIG_BOOT=y
 CONFIG_FASTBOOT_BASE=y
@@ -110,10 +122,9 @@ CONFIG_FASTBOOT_BASE=y
 #
 # General Settings
 #
+CONFIG_NAME=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAS_INSECURE_DEFAULTS=y
-CONFIG_INSECURE=y
 CONFIG_BANNER=y
 CONFIG_MEMINFO=y
 CONFIG_MEMTEST=y
@@ -144,18 +155,18 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
 CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
 CONFIG_STACK_SIZE=0x8000
 CONFIG_MALLOC_SIZE=0x0
+CONFIG_SCRATCH_SIZE=0x8000
 CONFIG_MALLOC_ALIGNMENT=8
 # end of memory layout
 
 # CONFIG_EXPERIMENTAL is not set
-# CONFIG_MALLOC_DLMALLOC is not set
 CONFIG_MALLOC_TLSF=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
 CONFIG_KALLSYMS=y
 CONFIG_RELOCATABLE=y
 # CONFIG_PANIC_POWEROFF is not set
 # CONFIG_PANIC_HANG is not set
 CONFIG_PANIC_RESET=y
+# CONFIG_PANIC_TRAP is not set
 CONFIG_PROMPT="barebox>"
 CONFIG_BAUDRATE=115200
 CONFIG_CBSIZE=1024
@@ -170,7 +181,6 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
-# CONFIG_PASSWORD is not set
 CONFIG_ERRNO_MESSAGES=y
 CONFIG_TIMESTAMP=y
 CONFIG_BOOTM=y
@@ -179,13 +189,14 @@ CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y
 CONFIG_BOOTM_OFTREE=y
+# CONFIG_BOOTM_OFTREE_FALLBACK is not set
 # CONFIG_BOOTM_UIMAGE is not set
 # CONFIG_BOOTM_AIMAGE is not set
-# CONFIG_BOOTM_ELF is not set
 # CONFIG_BOOTM_FITIMAGE is not set
 CONFIG_BOOTM_OPTIONAL_SIGNED_IMAGES=y
 CONFIG_BLSPEC=y
 CONFIG_FLEXIBLE_BOOTARGS=y
+CONFIG_ROOTWAIT_BOOTARG=y
 CONFIG_MMCBLKDEV_ROOTARG=y
 CONFIG_BAREBOX_UPDATE=y
 # CONFIG_SYSTEM_PARTITIONS is not set
@@ -217,22 +228,21 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
 CONFIG_HAS_SCHED=y
 CONFIG_POLLER=y
+CONFIG_POLLER_WARN_OVERTIME=y
 CONFIG_BTHREAD=y
+# CONFIG_TLV is not set
 CONFIG_STATE=y
 # CONFIG_STATE_CRYPTO is not set
 # CONFIG_STATE_BACKWARD_COMPATIBLE is not set
 # CONFIG_BOOTCHOOSER is not set
+CONFIG_BOOT_DEFAULTS=y
+CONFIG_BAREBOX_DT_2ND=y
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SERIAL_NUMBER_FIXUP_SYSTEMD_HOSTNAME is not set
 # CONFIG_SYSTEMD_OF_WATCHDOG is not set
 CONFIG_EXTERNAL_DTS_FRAGMENTS=""
-
-#
-# OP-TEE loading
-#
-# CONFIG_BOOTM_OPTEE is not set
-# CONFIG_PBL_OPTEE is not set
-# end of OP-TEE loading
+CONFIG_FILETYPE_STRINGS=y
 
 #
 # Android Fastboot
@@ -247,7 +257,6 @@ CONFIG_FASTBOOT_CMD_OEM=y
 #
 CONFIG_COMPILE_LOGLEVEL=7
 CONFIG_DEFAULT_LOGLEVEL=6
-CONFIG_HAS_DEBUG_LL=y
 # CONFIG_DEBUG_LL is not set
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_DEBUG_PROBES is not set
@@ -257,7 +266,6 @@ CONFIG_HAS_DEBUG_LL=y
 # CONFIG_PBL_BREAK is not set
 # CONFIG_PRINTF_FULL is not set
 # CONFIG_UBSAN is not set
-CONFIG_HAVE_ARCH_KASAN=y
 CONFIG_CC_HAS_KASAN_GENERIC=y
 # CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
@@ -300,7 +308,9 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_ARM_MMUINFO=y
 # CONFIG_CMD_BLKSTATS is not set
 CONFIG_CMD_REGULATOR=y
+# CONFIG_CMD_VARINFO is not set
 CONFIG_CMD_VERSION=y
+# CONFIG_CMD_BFETCH is not set
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
@@ -337,6 +347,7 @@ CONFIG_CMD_UMOUNT=y
 #
 # Environment
 #
+# CONFIG_CMD_CREATENV is not set
 CONFIG_CMD_NV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_DEFAULTENV=y
@@ -362,6 +373,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+CONFIG_CMD_TREE=y
 # CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
@@ -372,6 +384,7 @@ CONFIG_CMD_RMDIR=y
 CONFIG_CMD_SHA1SUM=y
 # CONFIG_CMD_SHA224SUM is not set
 # CONFIG_CMD_SHA256SUM is not set
+# CONFIG_CMD_BASE64 is not set
 # CONFIG_CMD_SHA384SUM is not set
 # CONFIG_CMD_SHA512SUM is not set
 # CONFIG_CMD_FIPTOOL is not set
@@ -400,6 +413,7 @@ CONFIG_NET_CMD_IFUP=y
 # CONFIG_CMD_MIITOOL is not set
 CONFIG_CMD_PING=y
 CONFIG_CMD_TFTP=y
+# CONFIG_CMD_IP is not set
 CONFIG_CMD_IP_ROUTE_GET=y
 # CONFIG_CMD_ETHLOG is not set
 # end of Network
@@ -411,7 +425,6 @@ CONFIG_CMD_CLEAR=y
 CONFIG_CMD_ECHO=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_EDIT=y
-# CONFIG_CMD_LOGIN is not set
 CONFIG_CMD_MENU=y
 # CONFIG_CMD_MENU_MANAGEMENT is not set
 CONFIG_CMD_MENUTREE=y
@@ -439,6 +452,7 @@ CONFIG_CMD_MW=y
 #
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DETECT=y
+# CONFIG_CMD_TRUNCATE is not set
 # CONFIG_CMD_SYNC is not set
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_GPIO=y
@@ -454,12 +468,18 @@ CONFIG_CMD_WD=y
 CONFIG_CMD_WD_DEFAULT_TIMOUT=0
 # end of Hardware manipulation
 
+#
+# Security
+#
+# CONFIG_CMD_BLOBGEN is not set
+# CONFIG_CMD_LOGIN is not set
+# end of Security
+
 #
 # Miscellaneous
 #
 # CONFIG_CMD_2048 is not set
 CONFIG_CMD_BAREBOX_UPDATE=y
-# CONFIG_CMD_BLOBGEN is not set
 # CONFIG_CMD_FIRMWARELOAD is not set
 # CONFIG_CMD_KALLSYMS is not set
 # CONFIG_CMD_OF_COMPATIBLE is not set
@@ -484,17 +504,18 @@ CONFIG_CMD_STATE=y
 # end of Commands
 
 CONFIG_NET=y
-CONFIG_NET_NFS=y
 # CONFIG_NET_NETCONSOLE is not set
 CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
 CONFIG_NET_FASTBOOT=y
+# CONFIG_NET_9P is not set
 
 #
 # Drivers
 #
+# CONFIG_DEEP_PROBE_DEFAULT is not set
 CONFIG_OFTREE=y
 CONFIG_OFTREE_MEM_GENERIC=y
 CONFIG_DTC=y
@@ -542,6 +563,7 @@ CONFIG_PHYLIB=y
 #
 # MII PHY device drivers
 #
+# CONFIG_ADIN_PHY is not set
 # CONFIG_AR8327N_PHY is not set
 # CONFIG_AT803X_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
@@ -634,6 +656,7 @@ CONFIG_MTD_OOB_DEVICE=y
 # CONFIG_MTD_UBI is not set
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
+# CONFIG_DM_BLK is not set
 
 #
 # drive types
@@ -659,7 +682,7 @@ CONFIG_USB_STORAGE=y
 # USB Miscellaneous drivers
 #
 # CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_ONBOARD_HUB is not set
+# CONFIG_USB_ONBOARD_DEV is not set
 # CONFIG_TYPEC_TUSB320 is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_AUTOSTART=y
@@ -680,12 +703,15 @@ CONFIG_MCI=y
 # --- Feature list ---
 #
 # CONFIG_MCI_TUNING is not set
+# CONFIG_MCI_STARTUP_NONE is not set
+# CONFIG_MCI_STARTUP_NONREMOVABLE is not set
 CONFIG_MCI_STARTUP=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 CONFIG_MCI_ERASE=y
 # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
 # CONFIG_MCI_MMC_GPP_PARTITIONS is not set
+# CONFIG_MCI_MMC_RPMB is not set
 
 #
 # --- MCI host drivers ---
@@ -700,6 +726,7 @@ CONFIG_MCI_MMCI=y
 # CONFIG_MCI_ARASAN is not set
 # CONFIG_MCI_AM654 is not set
 # CONFIG_MCI_SPI is not set
+# CONFIG_MMC_CADENCE_SDHCI is not set
 CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_COMMON_CLK=y
@@ -747,7 +774,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
 CONFIG_STATE_DRV=y
 CONFIG_DEV_MEM=y
 # CONFIG_UBOOTVAR is not set
-# CONFIG_STORAGE_BY_UUID is not set
+# CONFIG_STORAGE_BY_ALIAS is not set
 # end of Misc devices
 
 CONFIG_LED=y
@@ -840,6 +867,15 @@ CONFIG_REGULATOR_BCM283X=y
 # end of Remoteproc drivers
 
 # CONFIG_RESET_CONTROLLER is not set
+CONFIG_HW_HAS_PCI=y
+
+#
+# PCI bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_ECAM_GENERIC is not set
+# end of PCI bus options
+
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -918,6 +954,7 @@ CONFIG_REGULATOR_BCM283X=y
 CONFIG_FS=y
 CONFIG_FS_LEGACY=y
 CONFIG_FS_WRITABLE=y
+CONFIG_NETFS_SUPPORT=y
 
 #
 # Some selected filesystems still use the legacy FS API.
@@ -962,8 +999,93 @@ CONFIG_FS_FAT_LFN=y
 #
 # ZSTD support disabled
 #
+# CONFIG_FS_QEMU_FW_CFG is not set
 # end of Filesystem support
 
+#
+# Security options
+#
+CONFIG_INSECURE=y
+# CONFIG_SECURITY_POLICY is not set
+# CONFIG_PASSWORD is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+# CONFIG_BLOBGEN is not set
+
+#
+# OP-TEE loading
+#
+# CONFIG_BOOTM_OPTEE is not set
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
+
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+
+#
+# Memory initialization
+#
+CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
+# CONFIG_INIT_STACK_NONE is not set
+# CONFIG_INIT_STACK_ALL_PATTERN is not set
+CONFIG_INIT_STACK_ALL_ZERO=y
+# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
+# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
+CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
+# CONFIG_ZERO_CALL_USED_REGS is not set
+# end of Memory initialization
+
+#
+# Buffer overflow protection
+#
+CONFIG_STACK_GUARD_PAGE=y
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Buffer overflow protection
+# end of Hardening options
+
+CONFIG_HAS_INSECURE_DEFAULTS=y
+
+#
+# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
+#
+
+#
+# that some of the configured options have potentially insecure defaults.
+#
+
+#
+# Extra care needs to be taken in secure booted systems.
+#
+# end of Security options
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_DIGEST=y
+CONFIG_HAVE_DIGEST_MD5=y
+CONFIG_HAVE_DIGEST_SHA1=y
+# CONFIG_DIGEST_CRC32_GENERIC is not set
+CONFIG_DIGEST_MD5_GENERIC=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+# CONFIG_DIGEST_SHA256_GENERIC is not set
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+# CONFIG_DIGEST_HMAC_GENERIC is not set
+# CONFIG_DIGEST_SHA1_ARM is not set
+# CONFIG_DIGEST_SHA256_ARM is not set
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_ECDSA is not set
+# CONFIG_CRYPTO_BUILTIN_KEYS is not set
+# end of Crypto support
+
 #
 # Library routines
 #
@@ -992,6 +1114,7 @@ CONFIG_LIBFDT=y
 # CONFIG_ALLOW_PRNG_FALLBACK is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC8 is not set
+# CONFIG_CRC16 is not set
 
 #
 # Library gui routines
@@ -1000,74 +1123,8 @@ CONFIG_LIBFDT=y
 
 CONFIG_PRINTF_UUID=y
 CONFIG_NLS=y
-# CONFIG_BLOBGEN is not set
-CONFIG_ARCH_HAS_STACK_DUMP=y
-CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
-CONFIG_ARCH_HAS_ZERO_PAGE=y
 # end of Library routines
 
-#
-# Hardening options
-#
-
-#
-# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
-#
-
-#
-# that some of the configured options have potentially insecure defaults.
-#
-
-#
-# Extra care needs to be in secure booted systems.
-#
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-
-#
-# Memory initialization
-#
-CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
-# CONFIG_INIT_STACK_NONE is not set
-# CONFIG_INIT_STACK_ALL_PATTERN is not set
-CONFIG_INIT_STACK_ALL_ZERO=y
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
-# CONFIG_ZERO_CALL_USED_REGS is not set
-# end of Memory initialization
-
-CONFIG_STACK_GUARD_PAGE=y
-CONFIG_STACKPROTECTOR_NONE=y
-# CONFIG_STACKPROTECTOR_STRONG is not set
-CONFIG_PBL_STACKPROTECTOR_NONE=y
-# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
-# end of Hardening options
-
-#
-# Crypto support
-#
-CONFIG_CRC32=y
-CONFIG_DIGEST=y
-CONFIG_HAVE_DIGEST_MD5=y
-CONFIG_HAVE_DIGEST_SHA1=y
-# CONFIG_DIGEST_CRC32_GENERIC is not set
-CONFIG_DIGEST_MD5_GENERIC=y
-CONFIG_DIGEST_SHA1_GENERIC=y
-# CONFIG_DIGEST_SHA224_GENERIC is not set
-# CONFIG_DIGEST_SHA256_GENERIC is not set
-# CONFIG_DIGEST_SHA384_GENERIC is not set
-# CONFIG_DIGEST_SHA512_GENERIC is not set
-# CONFIG_DIGEST_HMAC_GENERIC is not set
-# CONFIG_DIGEST_SHA1_ARM is not set
-# CONFIG_DIGEST_SHA256_ARM is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_ECDSA is not set
-# CONFIG_CRYPTO_BUILTIN_KEYS is not set
-# CONFIG_CRYPTO_KEYSTORE is not set
-# end of Crypto support
-
 #
 # Firmware files
 #
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config b/configs/platform-v7a_noneon/barebox-vexpress.config
index ca983af..9cee673 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2025.03.0 Configuration
+# Barebox/arm 2025.11.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARCH_LINUX_NAME="arm"
@@ -28,6 +28,7 @@ CONFIG_ARCH_MULTIARCH=y
 # CONFIG_ARCH_LAYERSCAPE is not set
 # CONFIG_ARCH_OMAP_MULTI is not set
 # CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_SAMSUNG is not set
 # CONFIG_ARCH_STM32MP is not set
 # CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_VEXPRESS=y
@@ -48,7 +49,6 @@ CONFIG_MACH_VEXPRESS=y
 CONFIG_BOARD_ARM_GENERIC_DT=y
 CONFIG_AEABI=y
 # CONFIG_THUMB2_BAREBOX is not set
-# CONFIG_ARM_BOARD_APPEND_ATAG is not set
 # end of System Type
 
 # CONFIG_64BIT is not set
@@ -59,13 +59,16 @@ CONFIG_32BIT=y
 #
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_EXCEPTIONS=y
+# CONFIG_ARM_EXCEPTIONS_PBL is not set
 CONFIG_ARM_UNWIND=y
+CONFIG_ARM_MMU_PERMISSIONS=y
 # CONFIG_ARM_SEMIHOSTING is not set
 # CONFIG_ARM_PSCI_CLIENT is not set
+# CONFIG_BOOT_ATAGS is not set
+# CONFIG_ARM_BOOTM_ELF is not set
+# CONFIG_ARM_BOOTM_FIP is not set
 # end of ARM specific settings
 
-CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
-
 #
 # General architecture-dependent options
 #
@@ -73,15 +76,23 @@ CONFIG_BOARD_GENERIC_DT=y
 # CONFIG_BOARD_GENERIC_FIT is not set
 # end of General architecture-dependent options
 
+CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+CONFIG_ARCH_HAS_ZERO_PAGE=y
+CONFIG_HAVE_ARCH_BOARD_GENERIC_DT=y
+CONFIG_HAVE_ARCH_BOOTM_OFTREE=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_ARCH_HAS_SJLJ=y
+CONFIG_HAS_DEBUG_LL=y
+CONFIG_HAVE_ARCH_KASAN=y
 CONFIG_CC_IS_GCC=y
 CONFIG_GCC_VERSION=140201
 CONFIG_CLANG_VERSION=0
 CONFIG_GREGORIAN_CALENDER=y
 CONFIG_HAS_KALLSYMS=y
 CONFIG_HAS_MODULES=y
-CONFIG_HAS_CACHE=y
 CONFIG_HAS_DMA=y
-CONFIG_ARCH_HAS_SJLJ=y
 CONFIG_BLOCK=y
 CONFIG_BLOCK_WRITE=y
 CONFIG_FILETYPE=y
@@ -89,6 +100,7 @@ CONFIG_BINFMT=y
 CONFIG_UIMAGE=y
 CONFIG_LOGBUF=y
 CONFIG_STDDEV=y
+CONFIG_CDEV_ALIAS=y
 CONFIG_MENUTREE=y
 CONFIG_BOOT=y
 CONFIG_FASTBOOT_BASE=y
@@ -96,10 +108,9 @@ CONFIG_FASTBOOT_BASE=y
 #
 # General Settings
 #
+CONFIG_NAME=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAS_INSECURE_DEFAULTS=y
-CONFIG_INSECURE=y
 CONFIG_BANNER=y
 CONFIG_MEMINFO=y
 CONFIG_MEMTEST=y
@@ -130,18 +141,18 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
 CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
 CONFIG_STACK_SIZE=0x8000
 CONFIG_MALLOC_SIZE=0x0
+CONFIG_SCRATCH_SIZE=0x8000
 CONFIG_MALLOC_ALIGNMENT=8
 # end of memory layout
 
 # CONFIG_EXPERIMENTAL is not set
-# CONFIG_MALLOC_DLMALLOC is not set
 CONFIG_MALLOC_TLSF=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
 CONFIG_KALLSYMS=y
 CONFIG_RELOCATABLE=y
 # CONFIG_PANIC_POWEROFF is not set
 # CONFIG_PANIC_HANG is not set
 CONFIG_PANIC_RESET=y
+# CONFIG_PANIC_TRAP is not set
 CONFIG_PROMPT="vexpress: "
 CONFIG_BAUDRATE=115200
 CONFIG_CBSIZE=1024
@@ -156,7 +167,6 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
-# CONFIG_PASSWORD is not set
 CONFIG_ERRNO_MESSAGES=y
 CONFIG_TIMESTAMP=y
 CONFIG_BOOTM=y
@@ -165,13 +175,14 @@ CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y
 CONFIG_BOOTM_OFTREE=y
+# CONFIG_BOOTM_OFTREE_FALLBACK is not set
 # CONFIG_BOOTM_UIMAGE is not set
 # CONFIG_BOOTM_AIMAGE is not set
-# CONFIG_BOOTM_ELF is not set
 # CONFIG_BOOTM_FITIMAGE is not set
 CONFIG_BOOTM_OPTIONAL_SIGNED_IMAGES=y
 CONFIG_BLSPEC=y
 CONFIG_FLEXIBLE_BOOTARGS=y
+CONFIG_ROOTWAIT_BOOTARG=y
 CONFIG_MMCBLKDEV_ROOTARG=y
 CONFIG_BAREBOX_UPDATE=y
 # CONFIG_SYSTEM_PARTITIONS is not set
@@ -203,22 +214,21 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
 CONFIG_HAS_SCHED=y
 CONFIG_POLLER=y
+CONFIG_POLLER_WARN_OVERTIME=y
 CONFIG_BTHREAD=y
+# CONFIG_TLV is not set
 CONFIG_STATE=y
 # CONFIG_STATE_CRYPTO is not set
 # CONFIG_STATE_BACKWARD_COMPATIBLE is not set
 # CONFIG_BOOTCHOOSER is not set
+CONFIG_BOOT_DEFAULTS=y
+CONFIG_BAREBOX_DT_2ND=y
 CONFIG_RESET_SOURCE=y
 # CONFIG_MACHINE_ID is not set
+# CONFIG_SERIAL_NUMBER_FIXUP_SYSTEMD_HOSTNAME is not set
 # CONFIG_SYSTEMD_OF_WATCHDOG is not set
 CONFIG_EXTERNAL_DTS_FRAGMENTS=""
-
-#
-# OP-TEE loading
-#
-# CONFIG_BOOTM_OPTEE is not set
-# CONFIG_PBL_OPTEE is not set
-# end of OP-TEE loading
+CONFIG_FILETYPE_STRINGS=y
 
 #
 # Android Fastboot
@@ -233,7 +243,6 @@ CONFIG_FASTBOOT_CMD_OEM=y
 #
 CONFIG_COMPILE_LOGLEVEL=7
 CONFIG_DEFAULT_LOGLEVEL=6
-CONFIG_HAS_DEBUG_LL=y
 # CONFIG_DEBUG_LL is not set
 # CONFIG_DEBUG_INITCALLS is not set
 # CONFIG_DEBUG_PBL is not set
@@ -244,7 +253,6 @@ CONFIG_HAS_DEBUG_LL=y
 # CONFIG_PBL_BREAK is not set
 # CONFIG_PRINTF_FULL is not set
 # CONFIG_UBSAN is not set
-CONFIG_HAVE_ARCH_KASAN=y
 CONFIG_CC_HAS_KASAN_GENERIC=y
 # CONFIG_KASAN is not set
 # CONFIG_COMPILE_TEST is not set
@@ -287,7 +295,9 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_ARM_MMUINFO=y
 # CONFIG_CMD_BLKSTATS is not set
 CONFIG_CMD_REGULATOR=y
+# CONFIG_CMD_VARINFO is not set
 CONFIG_CMD_VERSION=y
+# CONFIG_CMD_BFETCH is not set
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_MMC_EXTCSD is not set
 # CONFIG_CMD_POLLER is not set
@@ -324,6 +334,7 @@ CONFIG_CMD_UMOUNT=y
 #
 # Environment
 #
+# CONFIG_CMD_CREATENV is not set
 CONFIG_CMD_NV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_DEFAULTENV=y
@@ -349,6 +360,7 @@ CONFIG_CMD_DIRNAME=y
 CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_LN=y
 CONFIG_CMD_LS=y
+CONFIG_CMD_TREE=y
 # CONFIG_CMD_STAT is not set
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MKDIR=y
@@ -359,6 +371,7 @@ CONFIG_CMD_RMDIR=y
 CONFIG_CMD_SHA1SUM=y
 # CONFIG_CMD_SHA224SUM is not set
 # CONFIG_CMD_SHA256SUM is not set
+# CONFIG_CMD_BASE64 is not set
 # CONFIG_CMD_SHA384SUM is not set
 # CONFIG_CMD_SHA512SUM is not set
 # CONFIG_CMD_FIPTOOL is not set
@@ -387,6 +400,7 @@ CONFIG_NET_CMD_IFUP=y
 # CONFIG_CMD_MIITOOL is not set
 CONFIG_CMD_PING=y
 CONFIG_CMD_TFTP=y
+# CONFIG_CMD_IP is not set
 CONFIG_CMD_IP_ROUTE_GET=y
 # CONFIG_CMD_ETHLOG is not set
 # end of Network
@@ -398,7 +412,6 @@ CONFIG_CMD_CLEAR=y
 CONFIG_CMD_ECHO=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_EDIT=y
-# CONFIG_CMD_LOGIN is not set
 CONFIG_CMD_MENU=y
 # CONFIG_CMD_MENU_MANAGEMENT is not set
 CONFIG_CMD_MENUTREE=y
@@ -426,6 +439,7 @@ CONFIG_CMD_MW=y
 #
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DETECT=y
+# CONFIG_CMD_TRUNCATE is not set
 # CONFIG_CMD_SYNC is not set
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_I2C=y
@@ -439,12 +453,18 @@ CONFIG_CMD_WD=y
 CONFIG_CMD_WD_DEFAULT_TIMOUT=0
 # end of Hardware manipulation
 
+#
+# Security
+#
+# CONFIG_CMD_BLOBGEN is not set
+# CONFIG_CMD_LOGIN is not set
+# end of Security
+
 #
 # Miscellaneous
 #
 # CONFIG_CMD_2048 is not set
 CONFIG_CMD_BAREBOX_UPDATE=y
-# CONFIG_CMD_BLOBGEN is not set
 # CONFIG_CMD_FIRMWARELOAD is not set
 # CONFIG_CMD_KALLSYMS is not set
 # CONFIG_CMD_OF_COMPATIBLE is not set
@@ -469,17 +489,18 @@ CONFIG_CMD_STATE=y
 # end of Commands
 
 CONFIG_NET=y
-CONFIG_NET_NFS=y
 # CONFIG_NET_NETCONSOLE is not set
 CONFIG_NET_RESOLV=y
 CONFIG_NET_IFUP=y
 CONFIG_NET_DHCP=y
 # CONFIG_NET_SNTP is not set
 CONFIG_NET_FASTBOOT=y
+# CONFIG_NET_9P is not set
 
 #
 # Drivers
 #
+# CONFIG_DEEP_PROBE_DEFAULT is not set
 CONFIG_OFTREE=y
 CONFIG_OFTREE_MEM_GENERIC=y
 CONFIG_DTC=y
@@ -526,6 +547,7 @@ CONFIG_DRIVER_NET_SMC911X=y
 #
 # MII PHY device drivers
 #
+# CONFIG_ADIN_PHY is not set
 # CONFIG_AR8327N_PHY is not set
 # CONFIG_AT803X_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
@@ -619,6 +641,7 @@ CONFIG_DRIVER_CFI_BANK_WIDTH_4=y
 # CONFIG_MTD_UBI is not set
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
+# CONFIG_DM_BLK is not set
 
 #
 # drive types
@@ -644,7 +667,7 @@ CONFIG_USB_STORAGE=y
 # USB Miscellaneous drivers
 #
 # CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_ONBOARD_HUB is not set
+# CONFIG_USB_ONBOARD_DEV is not set
 # CONFIG_TYPEC_TUSB320 is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_AUTOSTART=y
@@ -665,12 +688,15 @@ CONFIG_MCI=y
 # --- Feature list ---
 #
 # CONFIG_MCI_TUNING is not set
+# CONFIG_MCI_STARTUP_NONE is not set
+# CONFIG_MCI_STARTUP_NONREMOVABLE is not set
 CONFIG_MCI_STARTUP=y
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
 CONFIG_MCI_ERASE=y
 # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
 # CONFIG_MCI_MMC_GPP_PARTITIONS is not set
+# CONFIG_MCI_MMC_RPMB is not set
 
 #
 # --- MCI host drivers ---
@@ -683,6 +709,7 @@ CONFIG_MCI_MMCI=y
 # CONFIG_MCI_ARASAN is not set
 # CONFIG_MCI_AM654 is not set
 # CONFIG_MCI_SPI is not set
+# CONFIG_MMC_CADENCE_SDHCI is not set
 CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_COMMON_CLK=y
@@ -729,7 +756,7 @@ CONFIG_SRAM=y
 CONFIG_STATE_DRV=y
 CONFIG_DEV_MEM=y
 # CONFIG_UBOOTVAR is not set
-# CONFIG_STORAGE_BY_UUID is not set
+# CONFIG_STORAGE_BY_ALIAS is not set
 # end of Misc devices
 
 CONFIG_LED=y
@@ -791,6 +818,15 @@ CONFIG_REGULATOR=y
 # end of Remoteproc drivers
 
 # CONFIG_RESET_CONTROLLER is not set
+CONFIG_HW_HAS_PCI=y
+
+#
+# PCI bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_ECAM_GENERIC is not set
+# end of PCI bus options
+
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -866,6 +902,7 @@ CONFIG_REGULATOR=y
 CONFIG_FS=y
 CONFIG_FS_LEGACY=y
 CONFIG_FS_WRITABLE=y
+CONFIG_NETFS_SUPPORT=y
 
 #
 # Some selected filesystems still use the legacy FS API.
@@ -910,8 +947,93 @@ CONFIG_FS_FAT_LFN=y
 #
 # ZSTD support disabled
 #
+# CONFIG_FS_QEMU_FW_CFG is not set
 # end of Filesystem support
 
+#
+# Security options
+#
+CONFIG_INSECURE=y
+# CONFIG_SECURITY_POLICY is not set
+# CONFIG_PASSWORD is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+# CONFIG_BLOBGEN is not set
+
+#
+# OP-TEE loading
+#
+# CONFIG_BOOTM_OPTEE is not set
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
+
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+
+#
+# Memory initialization
+#
+CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
+CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
+# CONFIG_INIT_STACK_NONE is not set
+# CONFIG_INIT_STACK_ALL_PATTERN is not set
+CONFIG_INIT_STACK_ALL_ZERO=y
+# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
+# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
+CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
+# CONFIG_ZERO_CALL_USED_REGS is not set
+# end of Memory initialization
+
+#
+# Buffer overflow protection
+#
+CONFIG_STACK_GUARD_PAGE=y
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Buffer overflow protection
+# end of Hardening options
+
+CONFIG_HAS_INSECURE_DEFAULTS=y
+
+#
+# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
+#
+
+#
+# that some of the configured options have potentially insecure defaults.
+#
+
+#
+# Extra care needs to be taken in secure booted systems.
+#
+# end of Security options
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_DIGEST=y
+CONFIG_HAVE_DIGEST_MD5=y
+CONFIG_HAVE_DIGEST_SHA1=y
+# CONFIG_DIGEST_CRC32_GENERIC is not set
+CONFIG_DIGEST_MD5_GENERIC=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+# CONFIG_DIGEST_SHA256_GENERIC is not set
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+# CONFIG_DIGEST_HMAC_GENERIC is not set
+CONFIG_DIGEST_SHA1_ARM=y
+# CONFIG_DIGEST_SHA256_ARM is not set
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_ECDSA is not set
+# CONFIG_CRYPTO_BUILTIN_KEYS is not set
+# end of Crypto support
+
 #
 # Library routines
 #
@@ -940,6 +1062,7 @@ CONFIG_LIBFDT=y
 # CONFIG_ALLOW_PRNG_FALLBACK is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC8 is not set
+# CONFIG_CRC16 is not set
 
 #
 # Library gui routines
@@ -948,74 +1071,8 @@ CONFIG_LIBFDT=y
 
 CONFIG_PRINTF_UUID=y
 CONFIG_NLS=y
-# CONFIG_BLOBGEN is not set
-CONFIG_ARCH_HAS_STACK_DUMP=y
-CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
-CONFIG_ARCH_HAS_ZERO_PAGE=y
 # end of Library routines
 
-#
-# Hardening options
-#
-
-#
-# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
-#
-
-#
-# that some of the configured options have potentially insecure defaults.
-#
-
-#
-# Extra care needs to be in secure booted systems.
-#
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-
-#
-# Memory initialization
-#
-CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
-CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
-# CONFIG_INIT_STACK_NONE is not set
-# CONFIG_INIT_STACK_ALL_PATTERN is not set
-CONFIG_INIT_STACK_ALL_ZERO=y
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
-# CONFIG_ZERO_CALL_USED_REGS is not set
-# end of Memory initialization
-
-CONFIG_STACK_GUARD_PAGE=y
-CONFIG_STACKPROTECTOR_NONE=y
-# CONFIG_STACKPROTECTOR_STRONG is not set
-CONFIG_PBL_STACKPROTECTOR_NONE=y
-# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
-# end of Hardening options
-
-#
-# Crypto support
-#
-CONFIG_CRC32=y
-CONFIG_DIGEST=y
-CONFIG_HAVE_DIGEST_MD5=y
-CONFIG_HAVE_DIGEST_SHA1=y
-# CONFIG_DIGEST_CRC32_GENERIC is not set
-CONFIG_DIGEST_MD5_GENERIC=y
-CONFIG_DIGEST_SHA1_GENERIC=y
-# CONFIG_DIGEST_SHA224_GENERIC is not set
-# CONFIG_DIGEST_SHA256_GENERIC is not set
-# CONFIG_DIGEST_SHA384_GENERIC is not set
-# CONFIG_DIGEST_SHA512_GENERIC is not set
-# CONFIG_DIGEST_HMAC_GENERIC is not set
-CONFIG_DIGEST_SHA1_ARM=y
-# CONFIG_DIGEST_SHA256_ARM is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_ECDSA is not set
-# CONFIG_CRYPTO_BUILTIN_KEYS is not set
-# CONFIG_CRYPTO_KEYSTORE is not set
-# end of Crypto support
-
 #
 # Firmware files
 #
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config.diff b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
index e2a5942..57ead0b 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config.diff
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
@@ -1,5 +1,5 @@
-6f44517b962a1e868fa0f03b89d5c450
-910a141ea6513b56d6c27f22e037283f
+93f609b06d41c861931fd2c0592a536f
+feda0633ec76b4a6a0d546d8b20a7bf2
 CONFIG_AMBA_SP804=y
 # CONFIG_ARCH_BCM283X is not set
 CONFIG_ARCH_VEXPRESS=y
diff --git a/configs/platform-v7a_noneon/patches/barebox-2025.03.0/0001-pinctrl-at91-add-sama5d3-compatible-after-DT-regression.patch b/configs/platform-v7a_noneon/patches/barebox-2025.03.0/0001-pinctrl-at91-add-sama5d3-compatible-after-DT-regression.patch
deleted file mode 100644
index 74b11b9..0000000
--- a/configs/platform-v7a_noneon/patches/barebox-2025.03.0/0001-pinctrl-at91-add-sama5d3-compatible-after-DT-regression.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From a8c4a99884bded5a2951d8fc8e892b9c4d60a5f8 Mon Sep 17 00:00:00 2001
-From: Lars Schmidt <lsc@pengutronix.de>
-Date: Wed, 16 Apr 2025 15:26:56 +0200
-Subject: [PATCH] pinctrl: at91: add sama5d3 compatible after DT regression
-
-Commit f9abec74133a6 ("ARM: dts: microchip: Remove additional compatible
-string from PIO3 pinctrl nodes") removed compatible string
-atmel,at91sam9x5-pinctrl, which was used by pinctrl driver for sama3d3 in
-barebox. Compatible string atmel,sama5d3-pinctrl was left in list, so
-that needs to be included for identification.
-
-The removal caused an issue during boot process. The system did still boot,
-but no bootloader console was shown. Leaving the user without
-possibility to interact with the bootloader.
-
-The DT ABI breakage has been reported upstream:
-
-https://lore.kernel.org/all/fcdb9283-07aa-4d50-ac4d-317b0a4e5f7e@pengutronix.de/
-
-Signed-off-by: Lars Schmidt <lsc@pengutronix.de>
----
- drivers/pinctrl/pinctrl-at91.c | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
-index a3372a5035..ddc725187b 100644
---- a/drivers/pinctrl/pinctrl-at91.c
-+++ b/drivers/pinctrl/pinctrl-at91.c
-@@ -370,6 +370,9 @@ static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
- 
- static struct of_device_id at91_pinctrl_dt_ids[] = {
- 	{
-+		.compatible = "atmel,sama5d3-pinctrl",
-+		.data = &at91sam9x5_ops,
-+	}, {
- 		.compatible = "atmel,at91rm9200-pinctrl",
- 		.data = &at91rm9200_ops,
- 	}, {
--- 
-2.39.5
-
diff --git a/configs/platform-v7a_noneon/patches/barebox-2025.03.0/series b/configs/platform-v7a_noneon/patches/barebox-2025.03.0/series
deleted file mode 100644
index 426f667..0000000
--- a/configs/platform-v7a_noneon/patches/barebox-2025.03.0/series
+++ /dev/null
@@ -1 +0,0 @@
-0001-pinctrl-at91-add-sama5d3-compatible-after-DT-regression.patch
\ No newline at end of file
diff --git a/configs/platform-v7a_noneon/platformconfig b/configs/platform-v7a_noneon/platformconfig
index 8655518..360e314 100644
--- a/configs/platform-v7a_noneon/platformconfig
+++ b/configs/platform-v7a_noneon/platformconfig
@@ -179,8 +179,8 @@ PTXCONF_CONSOLE_SPEED="115200"
 # PTXCONF_AT91BOOTSTRAP2 is not set
 PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
 PTXCONF_BAREBOX_COMMON=y
-PTXCONF_BAREBOX_COMMON_VERSION="2025.03.0"
-PTXCONF_BAREBOX_COMMON_MD5="2b84bcf8644373db021c86864f2e5761"
+PTXCONF_BAREBOX_COMMON_VERSION="2025.11.0"
+PTXCONF_BAREBOX_COMMON_MD5="867dea758c6ea8b350bac57009235e88"
 PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
 PTXCONF_BAREBOX_AT91=y
 PTXCONF_BAREBOX_VEXPRESS=y

-- 
2.47.3




^ permalink raw reply	[flat|nested] 5+ messages in thread

* [DistroKit] [PATCH v2 3/3] v8a: barebox: version bump 2025.07.0 -> 2025.11.0
  2025-12-02 17:03 [DistroKit] [PATCH v2 0/3] Update barebox to newest version Fabian Pflug
  2025-12-02 17:03 ` [DistroKit] [PATCH v2 1/3] v7a: barebox: version bump 2025.06.1 -> 2025.11.0 Fabian Pflug
  2025-12-02 17:03 ` [DistroKit] [PATCH v2 2/3] v7a_noneon: barebox: version bump 2025.03.0 " Fabian Pflug
@ 2025-12-02 17:03 ` Fabian Pflug
  2025-12-03 17:38 ` [DistroKit] [PATCH v2 0/3] Update barebox to newest version Robert Schwebel
  3 siblings, 0 replies; 5+ messages in thread
From: Fabian Pflug @ 2025-12-02 17:03 UTC (permalink / raw)
  To: distrokit; +Cc: Fabian Pflug

Updating barebox to a current version. Run oldconfig and accepting all
defaults.

Signed-off-by: Fabian Pflug <f.pflug@pengutronix.de>
---
 configs/platform-v8a/barebox.config                |  166 +-
 ...on-deep-probe-include-of-for-of_device_id.patch |   30 -
 ...boards-i.MX93-Add-NXP-FRDM-i.MX93-support.patch | 2624 --------------------
 .../platform-v8a/patches/barebox-2025.07.0/series  |    2 -
 .../0001-ARM-i-MX93-reinstate-aliases.patch        |   62 +
 .../platform-v8a/patches/barebox-2025.11.0/series  |    1 +
 configs/platform-v8a/platformconfig                |    4 +-
 7 files changed, 168 insertions(+), 2721 deletions(-)

diff --git a/configs/platform-v8a/barebox.config b/configs/platform-v8a/barebox.config
index d0865a4..1ab047a 100644
--- a/configs/platform-v8a/barebox.config
+++ b/configs/platform-v8a/barebox.config
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2025.07.0 Configuration
+# Barebox/arm 2025.11.0 Configuration
 #
 CONFIG_ARM=y
 CONFIG_ARCH_LINUX_NAME="arm64"
@@ -13,6 +13,7 @@ CONFIG_ARM_LINUX=y
 # System Type
 #
 CONFIG_ARCH_MULTIARCH=y
+# CONFIG_ARCH_SOCFPGA is not set
 # CONFIG_ARCH_ARM64_VIRT is not set
 # CONFIG_ARCH_BCM283X is not set
 CONFIG_ARCH_IMX=y
@@ -20,6 +21,7 @@ CONFIG_ARCH_K3=y
 # CONFIG_ARCH_SUNXI is not set
 # CONFIG_ARCH_LAYERSCAPE is not set
 CONFIG_ARCH_ROCKCHIP=y
+# CONFIG_ARCH_SAMSUNG is not set
 # CONFIG_ARCH_ZYNQMP is not set
 
 #
@@ -38,6 +40,7 @@ CONFIG_USB_GADGET_DRIVER_ARC_PBL=y
 CONFIG_ARCH_IMX_ATF=y
 CONFIG_ARCH_IMX_ROMAPI=y
 CONFIG_ARCH_IMX_SCRATCHMEM=y
+CONFIG_ARCH_IMX_SNVS=y
 
 #
 # i.MX boards
@@ -99,6 +102,8 @@ CONFIG_MACH_BEAGLEPLAY=y
 # CONFIG_MACH_AM62LX_EVM is not set
 # CONFIG_ARCH_K3_AUTHENTICATE_IMAGE is not set
 # CONFIG_ARCH_K3_COMMAND_AUTHENTICATE is not set
+CONFIG_ARCH_K3_SIGNING_KEY_TI_DEVEL=y
+# CONFIG_ARCH_K3_SIGNING_KEY_CUSTOM is not set
 # end of K3 boards
 
 #
@@ -116,6 +121,7 @@ CONFIG_MACH_RK3568_EVB=y
 # CONFIG_MACH_PINE64_PINETAB2 is not set
 # CONFIG_MACH_PINE64_QUARTZ64 is not set
 # CONFIG_MACH_PROTONIC_MECSBC is not set
+# CONFIG_MACH_PROTONIC_PRTPUK is not set
 CONFIG_MACH_RADXA_ROCK3=y
 # CONFIG_MACH_RADXA_ROCK5 is not set
 # CONFIG_MACH_RADXA_CM3 is not set
@@ -129,6 +135,7 @@ CONFIG_ARCH_ROCKCHIP_ATF=y
 # CONFIG_ARCH_ROCKCHIP_ATF_PASS_FDT is not set
 CONFIG_ARCH_ROCKCHIP_ATF_FDT_SIZE=0x0
 # CONFIG_ARCH_ROCKCHIP_OPTEE is not set
+# CONFIG_ARCH_ROCKCHIP_IMAGE_SIGNED is not set
 # end of Rockchip Features
 
 CONFIG_BOARD_ARM_GENERIC_DT=y
@@ -142,6 +149,8 @@ CONFIG_64BIT=y
 #
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_EXCEPTIONS=y
+# CONFIG_ARM_EXCEPTIONS_PBL is not set
+CONFIG_ARM_MMU_PERMISSIONS=y
 # CONFIG_ARM_SEMIHOSTING is not set
 CONFIG_ARM_SMCCC=y
 CONFIG_ARM_PSCI_OF=y
@@ -158,6 +167,7 @@ CONFIG_BOARD_GENERIC_DT=y
 # CONFIG_BOARD_GENERIC_FIT is not set
 # end of General architecture-dependent options
 
+CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
 CONFIG_ARCH_HAS_STACK_DUMP=y
 CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
 CONFIG_ARCH_HAS_ZERO_PAGE=y
@@ -193,10 +203,9 @@ CONFIG_FASTBOOT_BASE=y
 #
 # General Settings
 #
+CONFIG_NAME=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAS_INSECURE_DEFAULTS=y
-CONFIG_INSECURE=y
 CONFIG_BANNER=y
 CONFIG_MEMINFO=y
 CONFIG_MEMTEST=y
@@ -239,6 +248,7 @@ CONFIG_RELOCATABLE=y
 # CONFIG_PANIC_POWEROFF is not set
 # CONFIG_PANIC_HANG is not set
 CONFIG_PANIC_RESET=y
+# CONFIG_PANIC_TRAP is not set
 CONFIG_PROMPT="barebox:"
 CONFIG_BAUDRATE=115200
 CONFIG_CBSIZE=1024
@@ -253,7 +263,6 @@ CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
-# CONFIG_PASSWORD is not set
 CONFIG_ERRNO_MESSAGES=y
 CONFIG_TIMESTAMP=y
 CONFIG_BOOTM=y
@@ -304,6 +313,7 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_REBOOT_MODE=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="$(objtree)/.ptxdist-defaultenv"
 CONFIG_HAS_SCHED=y
 CONFIG_POLLER=y
+CONFIG_POLLER_WARN_OVERTIME=y
 # CONFIG_BTHREAD is not set
 # CONFIG_TLV is not set
 CONFIG_STATE=y
@@ -317,13 +327,6 @@ CONFIG_MACHINE_ID=y
 # CONFIG_SERIAL_NUMBER_FIXUP_SYSTEMD_HOSTNAME is not set
 # CONFIG_SYSTEMD_OF_WATCHDOG is not set
 CONFIG_EXTERNAL_DTS_FRAGMENTS="${PTXDIST_PLATFORMCONFIGDIR}/dts/bootstate.dtsi"
-
-#
-# OP-TEE loading
-#
-# CONFIG_PBL_OPTEE is not set
-# end of OP-TEE loading
-
 CONFIG_FILETYPE_STRINGS=y
 
 #
@@ -368,6 +371,7 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
 # EFI (Extensible Firmware Interface) Support
 #
 CONFIG_HAVE_EFI_PAYLOAD=y
+# CONFIG_EFI_PAYLOAD is not set
 CONFIG_HAVE_EFI_STUB=y
 # end of EFI (Extensible Firmware Interface) Support
 
@@ -402,6 +406,7 @@ CONFIG_CMD_PM_DOMAIN=y
 CONFIG_CMD_NVMEM=y
 # CONFIG_CMD_VARINFO is not set
 CONFIG_CMD_VERSION=y
+# CONFIG_CMD_BFETCH is not set
 # CONFIG_CMD_MMC is not set
 CONFIG_CMD_MMC_EXTCSD=y
 CONFIG_CMD_POLLER=y
@@ -436,6 +441,7 @@ CONFIG_CMD_UMOUNT=y
 #
 # Environment
 #
+# CONFIG_CMD_CREATENV is not set
 CONFIG_CMD_NV=y
 CONFIG_CMD_EXPORT=y
 # CONFIG_CMD_DEFAULTENV is not set
@@ -513,7 +519,6 @@ CONFIG_CMD_CLEAR=y
 CONFIG_CMD_ECHO=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_EDIT=y
-# CONFIG_CMD_LOGIN is not set
 CONFIG_CMD_MENU=y
 CONFIG_CMD_MENU_MANAGEMENT=y
 CONFIG_CMD_MENUTREE=y
@@ -560,12 +565,18 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
 # CONFIG_CMD_HAB is not set
 # end of Hardware manipulation
 
+#
+# Security
+#
+# CONFIG_CMD_BLOBGEN is not set
+# CONFIG_CMD_LOGIN is not set
+# end of Security
+
 #
 # Miscellaneous
 #
 # CONFIG_CMD_2048 is not set
 CONFIG_CMD_BAREBOX_UPDATE=y
-# CONFIG_CMD_BLOBGEN is not set
 CONFIG_CMD_FIRMWARELOAD=y
 # CONFIG_CMD_KALLSYMS is not set
 CONFIG_CMD_OF_COMPATIBLE=y
@@ -666,6 +677,7 @@ CONFIG_DRIVER_NET_FEC_IMX=y
 #
 # MII PHY device drivers
 #
+# CONFIG_ADIN_PHY is not set
 # CONFIG_AR8327N_PHY is not set
 # CONFIG_AT803X_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
@@ -771,6 +783,7 @@ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
 # CONFIG_MTD_UBI is not set
 CONFIG_DISK=y
 CONFIG_DISK_WRITE=y
+# CONFIG_DM_BLK is not set
 
 #
 # drive types
@@ -829,6 +842,8 @@ CONFIG_MCI=y
 # --- Feature list ---
 #
 # CONFIG_MCI_TUNING is not set
+CONFIG_MCI_STARTUP_NONE=y
+# CONFIG_MCI_STARTUP_NONREMOVABLE is not set
 # CONFIG_MCI_STARTUP is not set
 CONFIG_MCI_INFO=y
 CONFIG_MCI_WRITE=y
@@ -851,6 +866,7 @@ CONFIG_MCI_IMX_ESDHC=y
 CONFIG_MCI_ARASAN=y
 CONFIG_MCI_AM654=y
 # CONFIG_MCI_SPI is not set
+# CONFIG_MMC_CADENCE_SDHCI is not set
 CONFIG_MCI_IMX_ESDHC_PBL=y
 CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
@@ -986,6 +1002,11 @@ CONFIG_PINCTRL_SINGLE=y
 # end of Pin controllers
 
 CONFIG_NVMEM=y
+CONFIG_NVMEM_LAYOUTS=y
+
+#
+# Layout Types
+#
 # CONFIG_NVMEM_RMEM is not set
 # CONFIG_NVMEM_SNVS_LPGPR is not set
 CONFIG_IMX_OCOTP=y
@@ -993,6 +1014,7 @@ CONFIG_IMX_OCOTP=y
 # CONFIG_IMX_OCOTP_ELE is not set
 # CONFIG_EEPROM_93XX46 is not set
 CONFIG_NVMEM_ROCKCHIP_OTP=y
+# CONFIG_NVMEM_ATMEL_SHA204A is not set
 
 #
 # Bus devices
@@ -1016,6 +1038,7 @@ CONFIG_REGULATOR_RK808=y
 
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RESET_IMX7=y
+# CONFIG_RESET_SOCFPGA32 is not set
 CONFIG_HW_HAS_PCI=y
 
 #
@@ -1198,61 +1221,23 @@ CONFIG_FS_FAT_LFN=y
 # end of Filesystem support
 
 #
-# Library routines
+# Security options
 #
-CONFIG_PARAMETER=y
-CONFIG_UNCOMPRESS=y
-CONFIG_ZLIB=y
-# CONFIG_BZLIB is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-# CONFIG_ZSTD_DECOMPRESS is not set
-CONFIG_XZ_DECOMPRESS=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_ARM64=y
-# CONFIG_BASE64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_PROCESS_ESCAPE_SEQUENCE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_FNMATCH=y
-CONFIG_QSORT=y
-CONFIG_IMAGE_SPARSE=y
-CONFIG_FIP=y
-CONFIG_LIBFDT=y
-# CONFIG_RATP is not set
-# CONFIG_ALLOW_PRNG_FALLBACK is not set
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC8 is not set
-
-#
-# Library gui routines
-#
-# end of Library gui routines
-
-CONFIG_PRINTF_UUID=y
-CONFIG_NLS=y
+CONFIG_INSECURE=y
+# CONFIG_SECURITY_POLICY is not set
+# CONFIG_PASSWORD is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
 # CONFIG_BLOBGEN is not set
-# end of Library routines
+
+#
+# OP-TEE loading
+#
+# CONFIG_PBL_OPTEE is not set
+# end of OP-TEE loading
 
 #
 # Hardening options
 #
-
-#
-# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
-#
-
-#
-# that some of the configured options have potentially insecure defaults.
-#
-
-#
-# Extra care needs to be taken in secure booted systems.
-#
 # CONFIG_BUG_ON_DATA_CORRUPTION is not set
 
 #
@@ -1281,6 +1266,21 @@ CONFIG_PBL_STACKPROTECTOR_NONE=y
 # end of Buffer overflow protection
 # end of Hardening options
 
+CONFIG_HAS_INSECURE_DEFAULTS=y
+
+#
+# This barebox configuration has CONFIG_HAS_INSECURE_DEFAULTS=y indicating
+#
+
+#
+# that some of the configured options have potentially insecure defaults.
+#
+
+#
+# Extra care needs to be taken in secure booted systems.
+#
+# end of Security options
+
 #
 # Crypto support
 #
@@ -1305,9 +1305,49 @@ CONFIG_DIGEST_SHA256_ARM64_CE=y
 # CONFIG_CRYPTO_RSA is not set
 # CONFIG_CRYPTO_ECDSA is not set
 # CONFIG_CRYPTO_BUILTIN_KEYS is not set
-# CONFIG_CRYPTO_KEYSTORE is not set
 # end of Crypto support
 
+#
+# Library routines
+#
+CONFIG_PARAMETER=y
+CONFIG_UNCOMPRESS=y
+CONFIG_ZLIB=y
+# CONFIG_BZLIB is not set
+# CONFIG_LZ4_DECOMPRESS is not set
+# CONFIG_ZSTD_DECOMPRESS is not set
+CONFIG_XZ_DECOMPRESS=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_ARM64=y
+# CONFIG_BASE64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PROCESS_ESCAPE_SEQUENCE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_FNMATCH=y
+CONFIG_QSORT=y
+CONFIG_IMAGE_SPARSE=y
+CONFIG_FIP=y
+CONFIG_LIBFDT=y
+# CONFIG_RATP is not set
+# CONFIG_ALLOW_PRNG_FALLBACK is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC8 is not set
+# CONFIG_CRC16 is not set
+
+#
+# Library gui routines
+#
+# end of Library gui routines
+
+CONFIG_PRINTF_UUID=y
+CONFIG_NLS=y
+# end of Library routines
+
 #
 # Firmware files
 #
diff --git a/configs/platform-v8a/patches/barebox-2025.07.0/0001-common-deep-probe-include-of-for-of_device_id.patch b/configs/platform-v8a/patches/barebox-2025.07.0/0001-common-deep-probe-include-of-for-of_device_id.patch
deleted file mode 100644
index 4dcde1e..0000000
--- a/configs/platform-v8a/patches/barebox-2025.07.0/0001-common-deep-probe-include-of-for-of_device_id.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 7b613535cda35020e6f65a96372fc0e9200f8d64 Mon Sep 17 00:00:00 2001
-From: Fabian Pflug <f.pflug@pengutronix.de>
-Date: Tue, 21 Oct 2025 12:28:32 +0200
-Subject: [PATCH 1/2] common: deep-probe: include of for of_device_id
-
-The struct of_device_id is used by deep-probe in its own struct
-deep_probe_entry, but never included. It does work, because all files
-needing deep-probe currently also include of.h, but that should not be
-mandatory.
-
-Signed-off-by: Fabian Pflug <f.pflug@pengutronix.de>
----
- include/deep-probe.h | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/include/deep-probe.h b/include/deep-probe.h
-index 9ba9d09ec3..d1413f979e 100644
---- a/include/deep-probe.h
-+++ b/include/deep-probe.h
-@@ -5,6 +5,7 @@
- #include <linux/stringify.h>
- #include <linux/compiler_types.h>
- #include <linux/types.h>
-+#include <of.h>
- 
- struct deep_probe_entry {
- 	const struct of_device_id *device_id;
--- 
-2.47.3
-
diff --git a/configs/platform-v8a/patches/barebox-2025.07.0/0002-ARM-boards-i.MX93-Add-NXP-FRDM-i.MX93-support.patch b/configs/platform-v8a/patches/barebox-2025.07.0/0002-ARM-boards-i.MX93-Add-NXP-FRDM-i.MX93-support.patch
deleted file mode 100644
index 1981fcf..0000000
--- a/configs/platform-v8a/patches/barebox-2025.07.0/0002-ARM-boards-i.MX93-Add-NXP-FRDM-i.MX93-support.patch
+++ /dev/null
@@ -1,2624 +0,0 @@
-From 597819f252f157760d77da1d7904a922e840f566 Mon Sep 17 00:00:00 2001
-From: Fabian Pflug <f.pflug@pengutronix.de>
-Date: Wed, 21 May 2025 10:44:07 +0200
-Subject: [PATCH 2/2] ARM: boards: i.MX93: Add NXP FRDM i.MX93 support
-
-This board is a low cost i.MX93 eval board from NXP.
-
-There is no upstream DT yet, therefore a minimal DT is added in this
-patch. The kernel DT is submitted in [0].
-
-The DDR timings are copied from the NXP yocto layer [1] for u-boot with
-some small modifications to remove unused timings and DDR sizes.
-
-[0] https://lore.kernel.org/r/20250526-fpg-nxp-imx93-frdm-v2-0-e5ad0efaec33@pengutronix.de
-[1] https://github.com/nxp-imx-support/meta-imx-frdm/blob/lf-6.6.36-2.1.0/meta-imx-bsp/recipes-bsp/u-boot/u-boot-imx/0002-imx-imx93_frdm-Add-basic-board-support.patch
-
-Signed-off-by: Fabian Pflug <f.pflug@pengutronix.de>
----
- arch/arm/boards/Makefile                      |    1 +
- arch/arm/boards/nxp-imx93-frdm/Makefile       |    2 +
- arch/arm/boards/nxp-imx93-frdm/board.c        |   12 +
- arch/arm/boards/nxp-imx93-frdm/lowlevel.c     |   46 +
- .../nxp-imx93-frdm/lpddr4x_2gb_timing.c       | 1907 +++++++++++++++++
- arch/arm/dts/Makefile                         |    1 +
- arch/arm/dts/imx93-frdm.dts                   |  534 +++++
- arch/arm/mach-imx/Kconfig                     |    9 +
- images/Makefile.imx                           |    4 +
- 9 files changed, 2516 insertions(+)
- create mode 100644 arch/arm/boards/nxp-imx93-frdm/Makefile
- create mode 100644 arch/arm/boards/nxp-imx93-frdm/board.c
- create mode 100644 arch/arm/boards/nxp-imx93-frdm/lowlevel.c
- create mode 100644 arch/arm/boards/nxp-imx93-frdm/lpddr4x_2gb_timing.c
- create mode 100644 arch/arm/dts/imx93-frdm.dts
-
-diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
-index ac1fa74d4c..8bbf4d5ea5 100644
---- a/arch/arm/boards/Makefile
-+++ b/arch/arm/boards/Makefile
-@@ -72,6 +72,7 @@ obj-$(CONFIG_MACH_NXP_IMX8MQ_EVK)		+= nxp-imx8mq-evk/
- obj-$(CONFIG_MACH_NXP_IMX8MM_EVK)		+= nxp-imx8mm-evk/
- obj-$(CONFIG_MACH_NXP_IMX8MN_EVK)		+= nxp-imx8mn-evk/
- obj-$(CONFIG_MACH_NXP_IMX8MP_EVK)		+= nxp-imx8mp-evk/
-+obj-$(CONFIG_MACH_NXP_IMX93_FRDM)		+= nxp-imx93-frdm/
- obj-$(CONFIG_MACH_CONGATEC_QMX8P_SOM)		+= congatec-qmx8p/
- obj-$(CONFIG_MACH_TQ_MBA8MPXL)			+= tqma8mpxl/
- obj-$(CONFIG_MACH_PCA100)			+= phytec-phycard-imx27/
-diff --git a/arch/arm/boards/nxp-imx93-frdm/Makefile b/arch/arm/boards/nxp-imx93-frdm/Makefile
-new file mode 100644
-index 0000000000..ac419ef7c2
---- /dev/null
-+++ b/arch/arm/boards/nxp-imx93-frdm/Makefile
-@@ -0,0 +1,2 @@
-+lwl-y += lowlevel.o lpddr4x_2gb_timing.o
-+obj-y += board.o
-diff --git a/arch/arm/boards/nxp-imx93-frdm/board.c b/arch/arm/boards/nxp-imx93-frdm/board.c
-new file mode 100644
-index 0000000000..1e1c54ce81
---- /dev/null
-+++ b/arch/arm/boards/nxp-imx93-frdm/board.c
-@@ -0,0 +1,12 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#include <deep-probe.h>
-+
-+static const struct of_device_id frdm_imx93_of_match[] = {
-+        {
-+                .compatible = "fsl,imx93-11x11-frdm",
-+        },
-+        { /* sentinel */ },
-+};
-+
-+BAREBOX_DEEP_PROBE_ENABLE(frdm_imx93_of_match);
-diff --git a/arch/arm/boards/nxp-imx93-frdm/lowlevel.c b/arch/arm/boards/nxp-imx93-frdm/lowlevel.c
-new file mode 100644
-index 0000000000..bc48160431
---- /dev/null
-+++ b/arch/arm/boards/nxp-imx93-frdm/lowlevel.c
-@@ -0,0 +1,46 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#include <common.h>
-+#include <debug_ll.h>
-+#include <mach/imx/debug_ll.h>
-+#include <mach/imx/generic.h>
-+#include <mach/imx/xload.h>
-+#include <asm/barebox-arm.h>
-+#include <soc/imx9/ddr.h>
-+#include <mach/imx/atf.h>
-+#include <mach/imx/xload.h>
-+#include <mach/imx/esdctl.h>
-+
-+extern char __dtb_z_imx93_frdm_start[];
-+extern struct dram_timing_info frdm_imx93_dram_timing;
-+
-+static noinline void frdm_imx93_continue(void)
-+{
-+	void __iomem *base = IOMEM(MX9_UART1_BASE_ADDR);
-+	void __iomem *muxbase = IOMEM(MX9_IOMUXC_BASE_ADDR);
-+
-+	/* configure LPUART1 TX pin */
-+	writel(0x0, muxbase + 0x184);
-+
-+	imx9_uart_setup(base);
-+	pbl_set_putc(lpuart32_putc, base + 0x10);
-+	putchar('>');
-+
-+	if (current_el() == 3) {
-+		imx93_ddr_init(&frdm_imx93_dram_timing, DRAM_TYPE_LPDDR4);
-+		imx93_load_and_start_image_via_tfa();
-+	}
-+
-+	imx93_barebox_entry(__dtb_z_imx93_frdm_start);
-+}
-+
-+ENTRY_FUNCTION(start_imx93_nxp_mx93_frdm, r0, r1, r2)
-+{
-+	if (current_el() == 3)
-+		imx93_cpu_lowlevel_init();
-+
-+	relocate_to_current_adr();
-+	setup_c();
-+
-+	frdm_imx93_continue();
-+}
-diff --git a/arch/arm/boards/nxp-imx93-frdm/lpddr4x_2gb_timing.c b/arch/arm/boards/nxp-imx93-frdm/lpddr4x_2gb_timing.c
-new file mode 100644
-index 0000000000..84164094d8
---- /dev/null
-+++ b/arch/arm/boards/nxp-imx93-frdm/lpddr4x_2gb_timing.c
-@@ -0,0 +1,1907 @@
-+/*
-+ * Copyright 2024 NXP
-+ *
-+ * SPDX-License-Identifier: BSD-3-Clause
-+ *
-+ * Code generated with DDR Tool v3.4.0_8.3-4e2b550a.
-+ * DDR PHY FW2022.01
-+ */
-+
-+#include <linux/kernel.h>
-+#include <common.h>
-+#include <soc/imx9/ddr.h>
-+
-+/* Initialize DDRC registers */
-+static struct dram_cfg_param ddr_ddrc_cfg[] = {
-+	{0x4e300110, 0x44100001},
-+	{0x4e300000, 0x8000ff},
-+	{0x4e300008, 0x0},
-+	{0x4e300080, 0x80000512},
-+	{0x4e300084, 0x0},
-+	{0x4e300114, 0x1002},
-+	{0x4e300260, 0x80},
-+	{0x4e300f04, 0x80},
-+	{0x4e300800, 0x43b30002},
-+	{0x4e300804, 0x1f1f1f1f},
-+	{0x4e301000, 0x0},
-+	{0x4e301240, 0x0},
-+	{0x4e301244, 0x0},
-+	{0x4e301248, 0x0},
-+	{0x4e30124c, 0x0},
-+	{0x4e301250, 0x0},
-+	{0x4e301254, 0x0},
-+	{0x4e301258, 0x0},
-+	{0x4e30125c, 0x0},
-+};
-+
-+/* dram fsp cfg */
-+static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
-+	{
-+		{
-+			{0x4e300100, 0x24AB321B},
-+			{0x4e300104, 0xF8EE001B},
-+			{0x4e300108, 0x2F2EE233},
-+			{0x4e30010C, 0x0005E18B},
-+			{0x4e300124, 0x1C760000},
-+			{0x4e300160, 0x00009102},
-+			{0x4e30016C, 0x35F00000},
-+			{0x4e300170, 0x8B0B0608},
-+			{0x4e300250, 0x00000028},
-+			{0x4e300254, 0x015B015B},
-+			{0x4e300258, 0x00000008},
-+			{0x4e30025C, 0x00000400},
-+			{0x4e300300, 0x224F2213},
-+			{0x4e300304, 0x015B2213},
-+			{0x4e300308, 0x0A3C0E3D},
-+		},
-+		{
-+			{0x01, 0xE4},
-+			{0x02, 0x36},
-+			{0x03, 0x32},
-+			{0x0b, 0x46},
-+			{0x0c, 0x11},
-+			{0x0e, 0x11},
-+			{0x16, 0x04},
-+		},
-+		0,
-+	},
-+	{
-+		{
-+			{0x4e300100, 0x12552100},
-+			{0x4e300104, 0xF877000E},
-+			{0x4e300108, 0x1816B4AA},
-+			{0x4e30010C, 0x005101E6},
-+			{0x4e300124, 0x0E3C0000},
-+			{0x4e300160, 0x00009101},
-+			{0x4e30016C, 0x30900000},
-+			{0x4e300170, 0x8A0A0508},
-+			{0x4e300250, 0x00000014},
-+			{0x4e300254, 0x00AA00AA},
-+			{0x4e300258, 0x00000008},
-+			{0x4e30025C, 0x00000400},
-+		},
-+		{
-+			{0x01, 0xB4},
-+			{0x02, 0x1B},
-+			{0x03, 0x32},
-+			{0x0b, 0x46},
-+			{0x0c, 0x11},
-+			{0x0e, 0x11},
-+			{0x16, 0x04},
-+		},
-+		0,
-+	},
-+	{
-+		{
-+			{0x4e300100, 0x00061000},
-+			{0x4e300104, 0xF855000A},
-+			{0x4e300108, 0x6E62FA48},
-+			{0x4e30010C, 0x0031010D},
-+			{0x4e300124, 0x04C50000},
-+			{0x4e300160, 0x00009100},
-+			{0x4e30016C, 0x30000000},
-+			{0x4e300170, 0x89090408},
-+			{0x4e300250, 0x00000007},
-+			{0x4e300254, 0x00340034},
-+			{0x4e300258, 0x00000008},
-+			{0x4e30025C, 0x00000400},
-+		},
-+		{
-+			{0x01, 0x94},
-+			{0x02, 0x9},
-+			{0x03, 0x32},
-+			{0x0b, 0x46},
-+			{0x0c, 0x11},
-+			{0x0e, 0x11},
-+			{0x16, 0x04},
-+		},
-+		1,
-+	},
-+};
-+
-+/* PHY Initialize Configuration */
-+static struct dram_cfg_param ddr_ddrphy_cfg[] = {
-+	{0x100a0, 0x4},
-+	{0x100a1, 0x5},
-+	{0x100a2, 0x6},
-+	{0x100a3, 0x7},
-+	{0x100a4, 0x0},
-+	{0x100a5, 0x1},
-+	{0x100a6, 0x2},
-+	{0x100a7, 0x3},
-+	{0x110a0, 0x3},
-+	{0x110a1, 0x2},
-+	{0x110a2, 0x0},
-+	{0x110a3, 0x1},
-+	{0x110a4, 0x7},
-+	{0x110a5, 0x6},
-+	{0x110a6, 0x4},
-+	{0x110a7, 0x5},
-+	{0x1005f, 0x5ff},
-+	{0x1015f, 0x5ff},
-+	{0x1105f, 0x5ff},
-+	{0x1115f, 0x5ff},
-+	{0x11005f, 0x5ff},
-+	{0x11015f, 0x5ff},
-+	{0x11105f, 0x5ff},
-+	{0x11115f, 0x5ff},
-+	{0x21005f, 0x5ff},
-+	{0x21015f, 0x5ff},
-+	{0x21105f, 0x5ff},
-+	{0x21115f, 0x5ff},
-+	{0x55, 0x1ff},
-+	{0x1055, 0x1ff},
-+	{0x2055, 0x1ff},
-+	{0x200c5, 0x19},
-+	{0x1200c5, 0xb},
-+	{0x2200c5, 0x7},
-+	{0x2002e, 0x2},
-+	{0x12002e, 0x2},
-+	{0x22002e, 0x2},
-+	{0x90204, 0x0},
-+	{0x190204, 0x0},
-+	{0x290204, 0x0},
-+	{0x20024, 0x1e3},
-+	{0x2003a, 0x2},
-+	{0x2007d, 0x212},
-+	{0x2007c, 0x61},
-+	{0x120024, 0x1e3},
-+	{0x2003a, 0x2},
-+	{0x12007d, 0x212},
-+	{0x12007c, 0x61},
-+	{0x220024, 0x1e3},
-+	{0x2003a, 0x2},
-+	{0x22007d, 0x212},
-+	{0x22007c, 0x61},
-+	{0x20056, 0x3},
-+	{0x120056, 0x3},
-+	{0x220056, 0x3},
-+	{0x1004d, 0x600},
-+	{0x1014d, 0x600},
-+	{0x1104d, 0x600},
-+	{0x1114d, 0x600},
-+	{0x11004d, 0x600},
-+	{0x11014d, 0x600},
-+	{0x11104d, 0x600},
-+	{0x11114d, 0x600},
-+	{0x21004d, 0x600},
-+	{0x21014d, 0x600},
-+	{0x21104d, 0x600},
-+	{0x21114d, 0x600},
-+	{0x10049, 0xe00},
-+	{0x10149, 0xe00},
-+	{0x11049, 0xe00},
-+	{0x11149, 0xe00},
-+	{0x110049, 0xe00},
-+	{0x110149, 0xe00},
-+	{0x111049, 0xe00},
-+	{0x111149, 0xe00},
-+	{0x210049, 0xe00},
-+	{0x210149, 0xe00},
-+	{0x211049, 0xe00},
-+	{0x211149, 0xe00},
-+	{0x43, 0x60},
-+	{0x1043, 0x60},
-+	{0x2043, 0x60},
-+	{0x20018, 0x1},
-+	{0x20075, 0x4},
-+	{0x20050, 0x0},
-+	{0x2009b, 0x2},
-+	{0x20008, 0x3a5},
-+	{0x120008, 0x1d3},
-+	{0x220008, 0x9c},
-+	{0x20088, 0x9},
-+	{0x200b2, 0x10c},
-+	{0x10043, 0x5a1},
-+	{0x10143, 0x5a1},
-+	{0x11043, 0x5a1},
-+	{0x11143, 0x5a1},
-+	{0x1200b2, 0x10c},
-+	{0x110043, 0x5a1},
-+	{0x110143, 0x5a1},
-+	{0x111043, 0x5a1},
-+	{0x111143, 0x5a1},
-+	{0x2200b2, 0x10c},
-+	{0x210043, 0x5a1},
-+	{0x210143, 0x5a1},
-+	{0x211043, 0x5a1},
-+	{0x211143, 0x5a1},
-+	{0x200fa, 0x2},
-+	{0x1200fa, 0x2},
-+	{0x2200fa, 0x2},
-+	{0x20019, 0x1},
-+	{0x120019, 0x1},
-+	{0x220019, 0x1},
-+	{0x200f0, 0x600},
-+	{0x200f1, 0x0},
-+	{0x200f2, 0x4444},
-+	{0x200f3, 0x8888},
-+	{0x200f4, 0x5655},
-+	{0x200f5, 0x0},
-+	{0x200f6, 0x0},
-+	{0x200f7, 0xf000},
-+	{0x1004a, 0x500},
-+	{0x1104a, 0x500},
-+	{0x20025, 0x0},
-+	{0x2002d, 0x0},
-+	{0x12002d, 0x0},
-+	{0x22002d, 0x0},
-+	{0x2002c, 0x0},
-+	{0x20021, 0x0},
-+	{0x200c7, 0x21},
-+	{0x1200c7, 0x21},
-+	{0x200ca, 0x24},
-+	{0x1200ca, 0x24},
-+};
-+
-+/* ddr phy trained csr */
-+static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
-+	{0x1005f, 0x0},
-+	{0x1015f, 0x0},
-+	{0x1105f, 0x0},
-+	{0x1115f, 0x0},
-+	{0x11005f, 0x0},
-+	{0x11015f, 0x0},
-+	{0x11105f, 0x0},
-+	{0x11115f, 0x0},
-+	{0x21005f, 0x0},
-+	{0x21015f, 0x0},
-+	{0x21105f, 0x0},
-+	{0x21115f, 0x0},
-+	{0x55, 0x0},
-+	{0x1055, 0x0},
-+	{0x2055, 0x0},
-+	{0x200c5, 0x0},
-+	{0x1200c5, 0x0},
-+	{0x2200c5, 0x0},
-+	{0x2002e, 0x0},
-+	{0x12002e, 0x0},
-+	{0x22002e, 0x0},
-+	{0x90204, 0x0},
-+	{0x190204, 0x0},
-+	{0x290204, 0x0},
-+	{0x20024, 0x0},
-+	{0x2003a, 0x0},
-+	{0x2007d, 0x0},
-+	{0x2007c, 0x0},
-+	{0x120024, 0x0},
-+	{0x12007d, 0x0},
-+	{0x12007c, 0x0},
-+	{0x220024, 0x0},
-+	{0x22007d, 0x0},
-+	{0x22007c, 0x0},
-+	{0x20056, 0x0},
-+	{0x120056, 0x0},
-+	{0x220056, 0x0},
-+	{0x1004d, 0x0},
-+	{0x1014d, 0x0},
-+	{0x1104d, 0x0},
-+	{0x1114d, 0x0},
-+	{0x11004d, 0x0},
-+	{0x11014d, 0x0},
-+	{0x11104d, 0x0},
-+	{0x11114d, 0x0},
-+	{0x21004d, 0x0},
-+	{0x21014d, 0x0},
-+	{0x21104d, 0x0},
-+	{0x21114d, 0x0},
-+	{0x10049, 0x0},
-+	{0x10149, 0x0},
-+	{0x11049, 0x0},
-+	{0x11149, 0x0},
-+	{0x110049, 0x0},
-+	{0x110149, 0x0},
-+	{0x111049, 0x0},
-+	{0x111149, 0x0},
-+	{0x210049, 0x0},
-+	{0x210149, 0x0},
-+	{0x211049, 0x0},
-+	{0x211149, 0x0},
-+	{0x43, 0x0},
-+	{0x1043, 0x0},
-+	{0x2043, 0x0},
-+	{0x20018, 0x0},
-+	{0x20075, 0x0},
-+	{0x20050, 0x0},
-+	{0x2009b, 0x0},
-+	{0x20008, 0x0},
-+	{0x120008, 0x0},
-+	{0x220008, 0x0},
-+	{0x20088, 0x0},
-+	{0x200b2, 0x0},
-+	{0x10043, 0x0},
-+	{0x10143, 0x0},
-+	{0x11043, 0x0},
-+	{0x11143, 0x0},
-+	{0x1200b2, 0x0},
-+	{0x110043, 0x0},
-+	{0x110143, 0x0},
-+	{0x111043, 0x0},
-+	{0x111143, 0x0},
-+	{0x2200b2, 0x0},
-+	{0x210043, 0x0},
-+	{0x210143, 0x0},
-+	{0x211043, 0x0},
-+	{0x211143, 0x0},
-+	{0x200fa, 0x0},
-+	{0x1200fa, 0x0},
-+	{0x2200fa, 0x0},
-+	{0x20019, 0x0},
-+	{0x120019, 0x0},
-+	{0x220019, 0x0},
-+	{0x200f0, 0x0},
-+	{0x200f1, 0x0},
-+	{0x200f2, 0x0},
-+	{0x200f3, 0x0},
-+	{0x200f4, 0x0},
-+	{0x200f5, 0x0},
-+	{0x200f6, 0x0},
-+	{0x200f7, 0x0},
-+	{0x1004a, 0x0},
-+	{0x1104a, 0x0},
-+	{0x20025, 0x0},
-+	{0x2002d, 0x0},
-+	{0x12002d, 0x0},
-+	{0x22002d, 0x0},
-+	{0x2002c, 0x0},
-+	{0xd0000, 0x0},
-+	{0x90000, 0x0},
-+	{0x90001, 0x0},
-+	{0x90002, 0x0},
-+	{0x90003, 0x0},
-+	{0x90004, 0x0},
-+	{0x90005, 0x0},
-+	{0x90029, 0x0},
-+	{0x9002a, 0x0},
-+	{0x9002b, 0x0},
-+	{0x9002c, 0x0},
-+	{0x9002d, 0x0},
-+	{0x9002e, 0x0},
-+	{0x9002f, 0x0},
-+	{0x90030, 0x0},
-+	{0x90031, 0x0},
-+	{0x90032, 0x0},
-+	{0x90033, 0x0},
-+	{0x90034, 0x0},
-+	{0x90035, 0x0},
-+	{0x90036, 0x0},
-+	{0x90037, 0x0},
-+	{0x90038, 0x0},
-+	{0x90039, 0x0},
-+	{0x9003a, 0x0},
-+	{0x9003b, 0x0},
-+	{0x9003c, 0x0},
-+	{0x9003d, 0x0},
-+	{0x9003e, 0x0},
-+	{0x9003f, 0x0},
-+	{0x90040, 0x0},
-+	{0x90041, 0x0},
-+	{0x90042, 0x0},
-+	{0x90043, 0x0},
-+	{0x90044, 0x0},
-+	{0x90045, 0x0},
-+	{0x90046, 0x0},
-+	{0x90047, 0x0},
-+	{0x90048, 0x0},
-+	{0x90049, 0x0},
-+	{0x9004a, 0x0},
-+	{0x9004b, 0x0},
-+	{0x9004c, 0x0},
-+	{0x9004d, 0x0},
-+	{0x9004e, 0x0},
-+	{0x9004f, 0x0},
-+	{0x90050, 0x0},
-+	{0x90051, 0x0},
-+	{0x90052, 0x0},
-+	{0x90053, 0x0},
-+	{0x90054, 0x0},
-+	{0x90055, 0x0},
-+	{0x90056, 0x0},
-+	{0x90057, 0x0},
-+	{0x90058, 0x0},
-+	{0x90059, 0x0},
-+	{0x9005a, 0x0},
-+	{0x9005b, 0x0},
-+	{0x9005c, 0x0},
-+	{0x9005d, 0x0},
-+	{0x9005e, 0x0},
-+	{0x9005f, 0x0},
-+	{0x90060, 0x0},
-+	{0x90061, 0x0},
-+	{0x90062, 0x0},
-+	{0x90063, 0x0},
-+	{0x90064, 0x0},
-+	{0x90065, 0x0},
-+	{0x90066, 0x0},
-+	{0x90067, 0x0},
-+	{0x90068, 0x0},
-+	{0x90069, 0x0},
-+	{0x9006a, 0x0},
-+	{0x9006b, 0x0},
-+	{0x9006c, 0x0},
-+	{0x9006d, 0x0},
-+	{0x9006e, 0x0},
-+	{0x9006f, 0x0},
-+	{0x90070, 0x0},
-+	{0x90071, 0x0},
-+	{0x90072, 0x0},
-+	{0x90073, 0x0},
-+	{0x90074, 0x0},
-+	{0x90075, 0x0},
-+	{0x90076, 0x0},
-+	{0x90077, 0x0},
-+	{0x90078, 0x0},
-+	{0x90079, 0x0},
-+	{0x9007a, 0x0},
-+	{0x9007b, 0x0},
-+	{0x9007c, 0x0},
-+	{0x9007d, 0x0},
-+	{0x9007e, 0x0},
-+	{0x9007f, 0x0},
-+	{0x90080, 0x0},
-+	{0x90081, 0x0},
-+	{0x90082, 0x0},
-+	{0x90083, 0x0},
-+	{0x90084, 0x0},
-+	{0x90085, 0x0},
-+	{0x90086, 0x0},
-+	{0x90087, 0x0},
-+	{0x90088, 0x0},
-+	{0x90089, 0x0},
-+	{0x9008a, 0x0},
-+	{0x9008b, 0x0},
-+	{0x9008c, 0x0},
-+	{0x9008d, 0x0},
-+	{0x9008e, 0x0},
-+	{0x9008f, 0x0},
-+	{0x90090, 0x0},
-+	{0x90091, 0x0},
-+	{0x90092, 0x0},
-+	{0x90093, 0x0},
-+	{0x90094, 0x0},
-+	{0x90095, 0x0},
-+	{0x90096, 0x0},
-+	{0x90097, 0x0},
-+	{0x90098, 0x0},
-+	{0x90099, 0x0},
-+	{0x9009a, 0x0},
-+	{0x9009b, 0x0},
-+	{0x9009c, 0x0},
-+	{0x9009d, 0x0},
-+	{0x9009e, 0x0},
-+	{0x9009f, 0x0},
-+	{0x900a0, 0x0},
-+	{0x900a1, 0x0},
-+	{0x900a2, 0x0},
-+	{0x900a3, 0x0},
-+	{0x900a4, 0x0},
-+	{0x900a5, 0x0},
-+	{0x900a6, 0x0},
-+	{0x900a7, 0x0},
-+	{0x900a8, 0x0},
-+	{0x900a9, 0x0},
-+	{0x40000, 0x0},
-+	{0x40020, 0x0},
-+	{0x40040, 0x0},
-+	{0x40060, 0x0},
-+	{0x40001, 0x0},
-+	{0x40021, 0x0},
-+	{0x40041, 0x0},
-+	{0x40061, 0x0},
-+	{0x40002, 0x0},
-+	{0x40022, 0x0},
-+	{0x40042, 0x0},
-+	{0x40062, 0x0},
-+	{0x40003, 0x0},
-+	{0x40023, 0x0},
-+	{0x40043, 0x0},
-+	{0x40063, 0x0},
-+	{0x40004, 0x0},
-+	{0x40024, 0x0},
-+	{0x40044, 0x0},
-+	{0x40064, 0x0},
-+	{0x40005, 0x0},
-+	{0x40025, 0x0},
-+	{0x40045, 0x0},
-+	{0x40065, 0x0},
-+	{0x40006, 0x0},
-+	{0x40026, 0x0},
-+	{0x40046, 0x0},
-+	{0x40066, 0x0},
-+	{0x40007, 0x0},
-+	{0x40027, 0x0},
-+	{0x40047, 0x0},
-+	{0x40067, 0x0},
-+	{0x40008, 0x0},
-+	{0x40028, 0x0},
-+	{0x40048, 0x0},
-+	{0x40068, 0x0},
-+	{0x40009, 0x0},
-+	{0x40029, 0x0},
-+	{0x40049, 0x0},
-+	{0x40069, 0x0},
-+	{0x4000a, 0x0},
-+	{0x4002a, 0x0},
-+	{0x4004a, 0x0},
-+	{0x4006a, 0x0},
-+	{0x4000b, 0x0},
-+	{0x4002b, 0x0},
-+	{0x4004b, 0x0},
-+	{0x4006b, 0x0},
-+	{0x4000c, 0x0},
-+	{0x4002c, 0x0},
-+	{0x4004c, 0x0},
-+	{0x4006c, 0x0},
-+	{0x4000d, 0x0},
-+	{0x4002d, 0x0},
-+	{0x4004d, 0x0},
-+	{0x4006d, 0x0},
-+	{0x4000e, 0x0},
-+	{0x4002e, 0x0},
-+	{0x4004e, 0x0},
-+	{0x4006e, 0x0},
-+	{0x4000f, 0x0},
-+	{0x4002f, 0x0},
-+	{0x4004f, 0x0},
-+	{0x4006f, 0x0},
-+	{0x40010, 0x0},
-+	{0x40030, 0x0},
-+	{0x40050, 0x0},
-+	{0x40070, 0x0},
-+	{0x40011, 0x0},
-+	{0x40031, 0x0},
-+	{0x40051, 0x0},
-+	{0x40071, 0x0},
-+	{0x40012, 0x0},
-+	{0x40032, 0x0},
-+	{0x40052, 0x0},
-+	{0x40072, 0x0},
-+	{0x40013, 0x0},
-+	{0x40033, 0x0},
-+	{0x40053, 0x0},
-+	{0x40073, 0x0},
-+	{0x40014, 0x0},
-+	{0x40034, 0x0},
-+	{0x40054, 0x0},
-+	{0x40074, 0x0},
-+	{0x40015, 0x0},
-+	{0x40035, 0x0},
-+	{0x40055, 0x0},
-+	{0x40075, 0x0},
-+	{0x40016, 0x0},
-+	{0x40036, 0x0},
-+	{0x40056, 0x0},
-+	{0x40076, 0x0},
-+	{0x40017, 0x0},
-+	{0x40037, 0x0},
-+	{0x40057, 0x0},
-+	{0x40077, 0x0},
-+	{0x40018, 0x0},
-+	{0x40038, 0x0},
-+	{0x40058, 0x0},
-+	{0x40078, 0x0},
-+	{0x40019, 0x0},
-+	{0x40039, 0x0},
-+	{0x40059, 0x0},
-+	{0x40079, 0x0},
-+	{0x4001a, 0x0},
-+	{0x4003a, 0x0},
-+	{0x4005a, 0x0},
-+	{0x4007a, 0x0},
-+	{0x900aa, 0x0},
-+	{0x900ab, 0x0},
-+	{0x900ac, 0x0},
-+	{0x900ad, 0x0},
-+	{0x900ae, 0x0},
-+	{0x900af, 0x0},
-+	{0x900b0, 0x0},
-+	{0x900b1, 0x0},
-+	{0x900b2, 0x0},
-+	{0x900b3, 0x0},
-+	{0x900b4, 0x0},
-+	{0x900b5, 0x0},
-+	{0x900b6, 0x0},
-+	{0x900b7, 0x0},
-+	{0x900b8, 0x0},
-+	{0x900b9, 0x0},
-+	{0x900ba, 0x0},
-+	{0x900bb, 0x0},
-+	{0x900bc, 0x0},
-+	{0x900bd, 0x0},
-+	{0x900be, 0x0},
-+	{0x900bf, 0x0},
-+	{0x900c0, 0x0},
-+	{0x900c1, 0x0},
-+	{0x900c2, 0x0},
-+	{0x900c3, 0x0},
-+	{0x900c4, 0x0},
-+	{0x900c5, 0x0},
-+	{0x900c6, 0x0},
-+	{0x900c7, 0x0},
-+	{0x900c8, 0x0},
-+	{0x900c9, 0x0},
-+	{0x900ca, 0x0},
-+	{0x900cb, 0x0},
-+	{0x900cc, 0x0},
-+	{0x900cd, 0x0},
-+	{0x900ce, 0x0},
-+	{0x900cf, 0x0},
-+	{0x900d0, 0x0},
-+	{0x900d1, 0x0},
-+	{0x900d2, 0x0},
-+	{0x900d3, 0x0},
-+	{0x900d4, 0x0},
-+	{0x900d5, 0x0},
-+	{0x900d6, 0x0},
-+	{0x900d7, 0x0},
-+	{0x900d8, 0x0},
-+	{0x900d9, 0x0},
-+	{0x900da, 0x0},
-+	{0x900db, 0x0},
-+	{0x900dc, 0x0},
-+	{0x900dd, 0x0},
-+	{0x900de, 0x0},
-+	{0x900df, 0x0},
-+	{0x900e0, 0x0},
-+	{0x900e1, 0x0},
-+	{0x900e2, 0x0},
-+	{0x900e3, 0x0},
-+	{0x900e4, 0x0},
-+	{0x900e5, 0x0},
-+	{0x900e6, 0x0},
-+	{0x900e7, 0x0},
-+	{0x900e8, 0x0},
-+	{0x900e9, 0x0},
-+	{0x900ea, 0x0},
-+	{0x900eb, 0x0},
-+	{0x900ec, 0x0},
-+	{0x900ed, 0x0},
-+	{0x900ee, 0x0},
-+	{0x900ef, 0x0},
-+	{0x900f0, 0x0},
-+	{0x900f1, 0x0},
-+	{0x900f2, 0x0},
-+	{0x900f3, 0x0},
-+	{0x900f4, 0x0},
-+	{0x900f5, 0x0},
-+	{0x900f6, 0x0},
-+	{0x900f7, 0x0},
-+	{0x900f8, 0x0},
-+	{0x900f9, 0x0},
-+	{0x900fa, 0x0},
-+	{0x900fb, 0x0},
-+	{0x900fc, 0x0},
-+	{0x900fd, 0x0},
-+	{0x900fe, 0x0},
-+	{0x900ff, 0x0},
-+	{0x90100, 0x0},
-+	{0x90101, 0x0},
-+	{0x90102, 0x0},
-+	{0x90103, 0x0},
-+	{0x90104, 0x0},
-+	{0x90105, 0x0},
-+	{0x90106, 0x0},
-+	{0x90107, 0x0},
-+	{0x90108, 0x0},
-+	{0x90109, 0x0},
-+	{0x9010a, 0x0},
-+	{0x9010b, 0x0},
-+	{0x9010c, 0x0},
-+	{0x9010d, 0x0},
-+	{0x9010e, 0x0},
-+	{0x9010f, 0x0},
-+	{0x90110, 0x0},
-+	{0x90111, 0x0},
-+	{0x90112, 0x0},
-+	{0x90113, 0x0},
-+	{0x90114, 0x0},
-+	{0x90115, 0x0},
-+	{0x90116, 0x0},
-+	{0x90117, 0x0},
-+	{0x90118, 0x0},
-+	{0x90119, 0x0},
-+	{0x9011a, 0x0},
-+	{0x9011b, 0x0},
-+	{0x9011c, 0x0},
-+	{0x9011d, 0x0},
-+	{0x9011e, 0x0},
-+	{0x9011f, 0x0},
-+	{0x90120, 0x0},
-+	{0x90121, 0x0},
-+	{0x90122, 0x0},
-+	{0x90123, 0x0},
-+	{0x90124, 0x0},
-+	{0x90125, 0x0},
-+	{0x90126, 0x0},
-+	{0x90127, 0x0},
-+	{0x90128, 0x0},
-+	{0x90129, 0x0},
-+	{0x9012a, 0x0},
-+	{0x9012b, 0x0},
-+	{0x9012c, 0x0},
-+	{0x9012d, 0x0},
-+	{0x9012e, 0x0},
-+	{0x9012f, 0x0},
-+	{0x90130, 0x0},
-+	{0x90131, 0x0},
-+	{0x90132, 0x0},
-+	{0x90133, 0x0},
-+	{0x90134, 0x0},
-+	{0x90135, 0x0},
-+	{0x90136, 0x0},
-+	{0x90137, 0x0},
-+	{0x90138, 0x0},
-+	{0x90139, 0x0},
-+	{0x9013a, 0x0},
-+	{0x9013b, 0x0},
-+	{0x9013c, 0x0},
-+	{0x9013d, 0x0},
-+	{0x9013e, 0x0},
-+	{0x9013f, 0x0},
-+	{0x90140, 0x0},
-+	{0x90141, 0x0},
-+	{0x90142, 0x0},
-+	{0x90143, 0x0},
-+	{0x90144, 0x0},
-+	{0x90145, 0x0},
-+	{0x90146, 0x0},
-+	{0x90147, 0x0},
-+	{0x90148, 0x0},
-+	{0x90149, 0x0},
-+	{0x9014a, 0x0},
-+	{0x9014b, 0x0},
-+	{0x9014c, 0x0},
-+	{0x9014d, 0x0},
-+	{0x9014e, 0x0},
-+	{0x9014f, 0x0},
-+	{0x90150, 0x0},
-+	{0x90151, 0x0},
-+	{0x90152, 0x0},
-+	{0x90153, 0x0},
-+	{0x90154, 0x0},
-+	{0x90155, 0x0},
-+	{0x90156, 0x0},
-+	{0x90157, 0x0},
-+	{0x90158, 0x0},
-+	{0x90159, 0x0},
-+	{0x9015a, 0x0},
-+	{0x9015b, 0x0},
-+	{0x9015c, 0x0},
-+	{0x9015d, 0x0},
-+	{0x9015e, 0x0},
-+	{0x9015f, 0x0},
-+	{0x90160, 0x0},
-+	{0x90161, 0x0},
-+	{0x90162, 0x0},
-+	{0x90163, 0x0},
-+	{0x90164, 0x0},
-+	{0x90165, 0x0},
-+	{0x90166, 0x0},
-+	{0x90167, 0x0},
-+	{0x90168, 0x0},
-+	{0x90169, 0x0},
-+	{0x9016a, 0x0},
-+	{0x9016b, 0x0},
-+	{0x9016c, 0x0},
-+	{0x9016d, 0x0},
-+	{0x9016e, 0x0},
-+	{0x9016f, 0x0},
-+	{0x90170, 0x0},
-+	{0x90171, 0x0},
-+	{0x90172, 0x0},
-+	{0x90173, 0x0},
-+	{0x90174, 0x0},
-+	{0x90175, 0x0},
-+	{0x90176, 0x0},
-+	{0x90177, 0x0},
-+	{0x90178, 0x0},
-+	{0x90179, 0x0},
-+	{0x9017a, 0x0},
-+	{0x9017b, 0x0},
-+	{0x9017c, 0x0},
-+	{0x9017d, 0x0},
-+	{0x9017e, 0x0},
-+	{0x9017f, 0x0},
-+	{0x90180, 0x0},
-+	{0x90181, 0x0},
-+	{0x90182, 0x0},
-+	{0x90183, 0x0},
-+	{0x90184, 0x0},
-+	{0x90006, 0x0},
-+	{0x90007, 0x0},
-+	{0x90008, 0x0},
-+	{0x90009, 0x0},
-+	{0x9000a, 0x0},
-+	{0x9000b, 0x0},
-+	{0xd00e7, 0x0},
-+	{0x90017, 0x0},
-+	{0x9001f, 0x0},
-+	{0x90026, 0x0},
-+	{0x400d0, 0x0},
-+	{0x400d1, 0x0},
-+	{0x400d2, 0x0},
-+	{0x400d3, 0x0},
-+	{0x400d4, 0x0},
-+	{0x400d5, 0x0},
-+	{0x400d6, 0x0},
-+	{0x400d7, 0x0},
-+	{0x200be, 0x0},
-+	{0x2000b, 0x0},
-+	{0x2000c, 0x0},
-+	{0x2000d, 0x0},
-+	{0x2000e, 0x0},
-+	{0x12000b, 0x0},
-+	{0x12000c, 0x0},
-+	{0x12000d, 0x0},
-+	{0x12000e, 0x0},
-+	{0x22000b, 0x0},
-+	{0x22000c, 0x0},
-+	{0x22000d, 0x0},
-+	{0x22000e, 0x0},
-+	{0x9000c, 0x0},
-+	{0x9000d, 0x0},
-+	{0x9000e, 0x0},
-+	{0x9000f, 0x0},
-+	{0x90010, 0x0},
-+	{0x90011, 0x0},
-+	{0x90012, 0x0},
-+	{0x90013, 0x0},
-+	{0x20010, 0x0},
-+	{0x20011, 0x0},
-+	{0x120010, 0x0},
-+	{0x120011, 0x0},
-+	{0x40080, 0x0},
-+	{0x40081, 0x0},
-+	{0x40082, 0x0},
-+	{0x40083, 0x0},
-+	{0x40084, 0x0},
-+	{0x40085, 0x0},
-+	{0x140080, 0x0},
-+	{0x140081, 0x0},
-+	{0x140082, 0x0},
-+	{0x140083, 0x0},
-+	{0x140084, 0x0},
-+	{0x140085, 0x0},
-+	{0x240080, 0x0},
-+	{0x240081, 0x0},
-+	{0x240082, 0x0},
-+	{0x240083, 0x0},
-+	{0x240084, 0x0},
-+	{0x240085, 0x0},
-+	{0x400fd, 0x0},
-+	{0x400f1, 0x0},
-+	{0x10011, 0x0},
-+	{0x10012, 0x0},
-+	{0x10013, 0x0},
-+	{0x10018, 0x0},
-+	{0x10002, 0x0},
-+	{0x100b2, 0x0},
-+	{0x101b4, 0x0},
-+	{0x102b4, 0x0},
-+	{0x103b4, 0x0},
-+	{0x104b4, 0x0},
-+	{0x105b4, 0x0},
-+	{0x106b4, 0x0},
-+	{0x107b4, 0x0},
-+	{0x108b4, 0x0},
-+	{0x11011, 0x0},
-+	{0x11012, 0x0},
-+	{0x11013, 0x0},
-+	{0x11018, 0x0},
-+	{0x11002, 0x0},
-+	{0x110b2, 0x0},
-+	{0x111b4, 0x0},
-+	{0x112b4, 0x0},
-+	{0x113b4, 0x0},
-+	{0x114b4, 0x0},
-+	{0x115b4, 0x0},
-+	{0x116b4, 0x0},
-+	{0x117b4, 0x0},
-+	{0x118b4, 0x0},
-+	{0x20089, 0x0},
-+	{0xc0080, 0x0},
-+	{0x200cb, 0x0},
-+	{0x10068, 0x0},
-+	{0x10069, 0x0},
-+	{0x10168, 0x0},
-+	{0x10169, 0x0},
-+	{0x10268, 0x0},
-+	{0x10269, 0x0},
-+	{0x10368, 0x0},
-+	{0x10369, 0x0},
-+	{0x10468, 0x0},
-+	{0x10469, 0x0},
-+	{0x10568, 0x0},
-+	{0x10569, 0x0},
-+	{0x10668, 0x0},
-+	{0x10669, 0x0},
-+	{0x10768, 0x0},
-+	{0x10769, 0x0},
-+	{0x10868, 0x0},
-+	{0x10869, 0x0},
-+	{0x100aa, 0x0},
-+	{0x10062, 0x0},
-+	{0x10001, 0x0},
-+	{0x100a0, 0x0},
-+	{0x100a1, 0x0},
-+	{0x100a2, 0x0},
-+	{0x100a3, 0x0},
-+	{0x100a4, 0x0},
-+	{0x100a5, 0x0},
-+	{0x100a6, 0x0},
-+	{0x100a7, 0x0},
-+	{0x11068, 0x0},
-+	{0x11069, 0x0},
-+	{0x11168, 0x0},
-+	{0x11169, 0x0},
-+	{0x11268, 0x0},
-+	{0x11269, 0x0},
-+	{0x11368, 0x0},
-+	{0x11369, 0x0},
-+	{0x11468, 0x0},
-+	{0x11469, 0x0},
-+	{0x11568, 0x0},
-+	{0x11569, 0x0},
-+	{0x11668, 0x0},
-+	{0x11669, 0x0},
-+	{0x11768, 0x0},
-+	{0x11769, 0x0},
-+	{0x11868, 0x0},
-+	{0x11869, 0x0},
-+	{0x110aa, 0x0},
-+	{0x11062, 0x0},
-+	{0x11001, 0x0},
-+	{0x110a0, 0x0},
-+	{0x110a1, 0x0},
-+	{0x110a2, 0x0},
-+	{0x110a3, 0x0},
-+	{0x110a4, 0x0},
-+	{0x110a5, 0x0},
-+	{0x110a6, 0x0},
-+	{0x110a7, 0x0},
-+	{0x80, 0x0},
-+	{0x1080, 0x0},
-+	{0x2080, 0x0},
-+	{0x10020, 0x0},
-+	{0x10080, 0x0},
-+	{0x10081, 0x0},
-+	{0x100d0, 0x0},
-+	{0x100d1, 0x0},
-+	{0x1008c, 0x0},
-+	{0x1008d, 0x0},
-+	{0x10180, 0x0},
-+	{0x10181, 0x0},
-+	{0x101d0, 0x0},
-+	{0x101d1, 0x0},
-+	{0x1018c, 0x0},
-+	{0x1018d, 0x0},
-+	{0x100c0, 0x0},
-+	{0x100c1, 0x0},
-+	{0x101c0, 0x0},
-+	{0x101c1, 0x0},
-+	{0x102c0, 0x0},
-+	{0x102c1, 0x0},
-+	{0x103c0, 0x0},
-+	{0x103c1, 0x0},
-+	{0x104c0, 0x0},
-+	{0x104c1, 0x0},
-+	{0x105c0, 0x0},
-+	{0x105c1, 0x0},
-+	{0x106c0, 0x0},
-+	{0x106c1, 0x0},
-+	{0x107c0, 0x0},
-+	{0x107c1, 0x0},
-+	{0x108c0, 0x0},
-+	{0x108c1, 0x0},
-+	{0x100ae, 0x0},
-+	{0x100af, 0x0},
-+	{0x11020, 0x0},
-+	{0x11080, 0x0},
-+	{0x11081, 0x0},
-+	{0x110d0, 0x0},
-+	{0x110d1, 0x0},
-+	{0x1108c, 0x0},
-+	{0x1108d, 0x0},
-+	{0x11180, 0x0},
-+	{0x11181, 0x0},
-+	{0x111d0, 0x0},
-+	{0x111d1, 0x0},
-+	{0x1118c, 0x0},
-+	{0x1118d, 0x0},
-+	{0x110c0, 0x0},
-+	{0x110c1, 0x0},
-+	{0x111c0, 0x0},
-+	{0x111c1, 0x0},
-+	{0x112c0, 0x0},
-+	{0x112c1, 0x0},
-+	{0x113c0, 0x0},
-+	{0x113c1, 0x0},
-+	{0x114c0, 0x0},
-+	{0x114c1, 0x0},
-+	{0x115c0, 0x0},
-+	{0x115c1, 0x0},
-+	{0x116c0, 0x0},
-+	{0x116c1, 0x0},
-+	{0x117c0, 0x0},
-+	{0x117c1, 0x0},
-+	{0x118c0, 0x0},
-+	{0x118c1, 0x0},
-+	{0x110ae, 0x0},
-+	{0x110af, 0x0},
-+	{0x90201, 0x0},
-+	{0x90202, 0x0},
-+	{0x90203, 0x0},
-+	{0x90205, 0x0},
-+	{0x90206, 0x0},
-+	{0x90207, 0x0},
-+	{0x90208, 0x0},
-+	{0x20020, 0x0},
-+	{0x100080, 0x0},
-+	{0x101080, 0x0},
-+	{0x102080, 0x0},
-+	{0x110020, 0x0},
-+	{0x110080, 0x0},
-+	{0x110081, 0x0},
-+	{0x1100d0, 0x0},
-+	{0x1100d1, 0x0},
-+	{0x11008c, 0x0},
-+	{0x11008d, 0x0},
-+	{0x110180, 0x0},
-+	{0x110181, 0x0},
-+	{0x1101d0, 0x0},
-+	{0x1101d1, 0x0},
-+	{0x11018c, 0x0},
-+	{0x11018d, 0x0},
-+	{0x1100c0, 0x0},
-+	{0x1100c1, 0x0},
-+	{0x1101c0, 0x0},
-+	{0x1101c1, 0x0},
-+	{0x1102c0, 0x0},
-+	{0x1102c1, 0x0},
-+	{0x1103c0, 0x0},
-+	{0x1103c1, 0x0},
-+	{0x1104c0, 0x0},
-+	{0x1104c1, 0x0},
-+	{0x1105c0, 0x0},
-+	{0x1105c1, 0x0},
-+	{0x1106c0, 0x0},
-+	{0x1106c1, 0x0},
-+	{0x1107c0, 0x0},
-+	{0x1107c1, 0x0},
-+	{0x1108c0, 0x0},
-+	{0x1108c1, 0x0},
-+	{0x1100ae, 0x0},
-+	{0x1100af, 0x0},
-+	{0x111020, 0x0},
-+	{0x111080, 0x0},
-+	{0x111081, 0x0},
-+	{0x1110d0, 0x0},
-+	{0x1110d1, 0x0},
-+	{0x11108c, 0x0},
-+	{0x11108d, 0x0},
-+	{0x111180, 0x0},
-+	{0x111181, 0x0},
-+	{0x1111d0, 0x0},
-+	{0x1111d1, 0x0},
-+	{0x11118c, 0x0},
-+	{0x11118d, 0x0},
-+	{0x1110c0, 0x0},
-+	{0x1110c1, 0x0},
-+	{0x1111c0, 0x0},
-+	{0x1111c1, 0x0},
-+	{0x1112c0, 0x0},
-+	{0x1112c1, 0x0},
-+	{0x1113c0, 0x0},
-+	{0x1113c1, 0x0},
-+	{0x1114c0, 0x0},
-+	{0x1114c1, 0x0},
-+	{0x1115c0, 0x0},
-+	{0x1115c1, 0x0},
-+	{0x1116c0, 0x0},
-+	{0x1116c1, 0x0},
-+	{0x1117c0, 0x0},
-+	{0x1117c1, 0x0},
-+	{0x1118c0, 0x0},
-+	{0x1118c1, 0x0},
-+	{0x1110ae, 0x0},
-+	{0x1110af, 0x0},
-+	{0x190201, 0x0},
-+	{0x190202, 0x0},
-+	{0x190203, 0x0},
-+	{0x190205, 0x0},
-+	{0x190206, 0x0},
-+	{0x190207, 0x0},
-+	{0x190208, 0x0},
-+	{0x120020, 0x0},
-+	{0x200080, 0x0},
-+	{0x201080, 0x0},
-+	{0x202080, 0x0},
-+	{0x210020, 0x0},
-+	{0x210080, 0x0},
-+	{0x210081, 0x0},
-+	{0x2100d0, 0x0},
-+	{0x2100d1, 0x0},
-+	{0x21008c, 0x0},
-+	{0x21008d, 0x0},
-+	{0x210180, 0x0},
-+	{0x210181, 0x0},
-+	{0x2101d0, 0x0},
-+	{0x2101d1, 0x0},
-+	{0x21018c, 0x0},
-+	{0x21018d, 0x0},
-+	{0x2100c0, 0x0},
-+	{0x2100c1, 0x0},
-+	{0x2101c0, 0x0},
-+	{0x2101c1, 0x0},
-+	{0x2102c0, 0x0},
-+	{0x2102c1, 0x0},
-+	{0x2103c0, 0x0},
-+	{0x2103c1, 0x0},
-+	{0x2104c0, 0x0},
-+	{0x2104c1, 0x0},
-+	{0x2105c0, 0x0},
-+	{0x2105c1, 0x0},
-+	{0x2106c0, 0x0},
-+	{0x2106c1, 0x0},
-+	{0x2107c0, 0x0},
-+	{0x2107c1, 0x0},
-+	{0x2108c0, 0x0},
-+	{0x2108c1, 0x0},
-+	{0x2100ae, 0x0},
-+	{0x2100af, 0x0},
-+	{0x211020, 0x0},
-+	{0x211080, 0x0},
-+	{0x211081, 0x0},
-+	{0x2110d0, 0x0},
-+	{0x2110d1, 0x0},
-+	{0x21108c, 0x0},
-+	{0x21108d, 0x0},
-+	{0x211180, 0x0},
-+	{0x211181, 0x0},
-+	{0x2111d0, 0x0},
-+	{0x2111d1, 0x0},
-+	{0x21118c, 0x0},
-+	{0x21118d, 0x0},
-+	{0x2110c0, 0x0},
-+	{0x2110c1, 0x0},
-+	{0x2111c0, 0x0},
-+	{0x2111c1, 0x0},
-+	{0x2112c0, 0x0},
-+	{0x2112c1, 0x0},
-+	{0x2113c0, 0x0},
-+	{0x2113c1, 0x0},
-+	{0x2114c0, 0x0},
-+	{0x2114c1, 0x0},
-+	{0x2115c0, 0x0},
-+	{0x2115c1, 0x0},
-+	{0x2116c0, 0x0},
-+	{0x2116c1, 0x0},
-+	{0x2117c0, 0x0},
-+	{0x2117c1, 0x0},
-+	{0x2118c0, 0x0},
-+	{0x2118c1, 0x0},
-+	{0x2110ae, 0x0},
-+	{0x2110af, 0x0},
-+	{0x290201, 0x0},
-+	{0x290202, 0x0},
-+	{0x290203, 0x0},
-+	{0x290205, 0x0},
-+	{0x290206, 0x0},
-+	{0x290207, 0x0},
-+	{0x290208, 0x0},
-+	{0x220020, 0x0},
-+	{0x20077, 0x0},
-+	{0x20072, 0x0},
-+	{0x20073, 0x0},
-+	{0x400c0, 0x0},
-+	{0x10040, 0x0},
-+	{0x10140, 0x0},
-+	{0x10240, 0x0},
-+	{0x10340, 0x0},
-+	{0x10440, 0x0},
-+	{0x10540, 0x0},
-+	{0x10640, 0x0},
-+	{0x10740, 0x0},
-+	{0x10840, 0x0},
-+	{0x11040, 0x0},
-+	{0x11140, 0x0},
-+	{0x11240, 0x0},
-+	{0x11340, 0x0},
-+	{0x11440, 0x0},
-+	{0x11540, 0x0},
-+	{0x11640, 0x0},
-+	{0x11740, 0x0},
-+	{0x11840, 0x0},
-+};
-+
-+/* P0 message block parameter for training firmware */
-+static struct dram_cfg_param ddr_fsp0_cfg[] = {
-+	{0xd0000, 0x0},
-+	{0x54003, 0xe94},
-+	{0x54004, 0x4},
-+	{0x54006, 0x15},
-+	{0x54008, 0x131f},
-+	{0x54009, 0xc8},
-+	{0x5400b, 0x4},
-+	{0x5400d, 0x100},
-+	{0x5400f, 0x100},
-+	{0x54012, 0x110},
-+	{0x54019, 0x36e4},
-+	{0x5401a, 0x32},
-+	{0x5401b, 0x1146},
-+	{0x5401c, 0x1108},
-+	{0x5401e, 0x4},
-+	{0x5401f, 0x36e4},
-+	{0x54020, 0x32},
-+	{0x54021, 0x1146},
-+	{0x54022, 0x1108},
-+	{0x54024, 0x4},
-+	{0x54032, 0xe400},
-+	{0x54033, 0x3236},
-+	{0x54034, 0x4600},
-+	{0x54035, 0x811},
-+	{0x54036, 0x11},
-+	{0x54037, 0x400},
-+	{0x54038, 0xe400},
-+	{0x54039, 0x3236},
-+	{0x5403a, 0x4600},
-+	{0x5403b, 0x811},
-+	{0x5403c, 0x11},
-+	{0x5403d, 0x400},
-+	{0xd0000, 0x1}
-+};
-+
-+/* P0 2D message block parameter for training firmware */
-+static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
-+	{0xd0000, 0x0},
-+	{0x54003, 0xe94},
-+	{0x54004, 0x4},
-+	{0x54006, 0x15},
-+	{0x54008, 0x61},
-+	{0x54009, 0xc8},
-+	{0x5400b, 0x4},
-+	{0x5400d, 0x100},
-+	{0x5400f, 0x100},
-+	{0x54010, 0x2080},
-+	{0x54012, 0x110},
-+	{0x54019, 0x36e4},
-+	{0x5401a, 0x32},
-+	{0x5401b, 0x1146},
-+	{0x5401c, 0x1108},
-+	{0x5401e, 0x4},
-+	{0x5401f, 0x36e4},
-+	{0x54020, 0x32},
-+	{0x54021, 0x1146},
-+	{0x54022, 0x1108},
-+	{0x54024, 0x4},
-+	{0x54032, 0xe400},
-+	{0x54033, 0x3236},
-+	{0x54034, 0x4600},
-+	{0x54035, 0x811},
-+	{0x54036, 0x11},
-+	{0x54037, 0x400},
-+	{0x54038, 0xe400},
-+	{0x54039, 0x3236},
-+	{0x5403a, 0x4600},
-+	{0x5403b, 0x811},
-+	{0x5403c, 0x11},
-+	{0x5403d, 0x400},
-+	{0xd0000, 0x1}
-+};
-+
-+/* DRAM PHY init engine image */
-+static struct dram_cfg_param ddr_phy_pie[] = {
-+	{0xd0000, 0x0},
-+	{0x90000, 0x10},
-+	{0x90001, 0x400},
-+	{0x90002, 0x10e},
-+	{0x90003, 0x0},
-+	{0x90004, 0x0},
-+	{0x90005, 0x8},
-+	{0x90029, 0xb},
-+	{0x9002a, 0x480},
-+	{0x9002b, 0x109},
-+	{0x9002c, 0x8},
-+	{0x9002d, 0x448},
-+	{0x9002e, 0x139},
-+	{0x9002f, 0x8},
-+	{0x90030, 0x478},
-+	{0x90031, 0x109},
-+	{0x90032, 0x0},
-+	{0x90033, 0xe8},
-+	{0x90034, 0x109},
-+	{0x90035, 0x2},
-+	{0x90036, 0x10},
-+	{0x90037, 0x139},
-+	{0x90038, 0xb},
-+	{0x90039, 0x7c0},
-+	{0x9003a, 0x139},
-+	{0x9003b, 0x44},
-+	{0x9003c, 0x633},
-+	{0x9003d, 0x159},
-+	{0x9003e, 0x14f},
-+	{0x9003f, 0x630},
-+	{0x90040, 0x159},
-+	{0x90041, 0x47},
-+	{0x90042, 0x633},
-+	{0x90043, 0x149},
-+	{0x90044, 0x4f},
-+	{0x90045, 0x633},
-+	{0x90046, 0x179},
-+	{0x90047, 0x8},
-+	{0x90048, 0xe0},
-+	{0x90049, 0x109},
-+	{0x9004a, 0x0},
-+	{0x9004b, 0x7c8},
-+	{0x9004c, 0x109},
-+	{0x9004d, 0x0},
-+	{0x9004e, 0x1},
-+	{0x9004f, 0x8},
-+	{0x90050, 0x30},
-+	{0x90051, 0x65a},
-+	{0x90052, 0x9},
-+	{0x90053, 0x0},
-+	{0x90054, 0x45a},
-+	{0x90055, 0x9},
-+	{0x90056, 0x0},
-+	{0x90057, 0x448},
-+	{0x90058, 0x109},
-+	{0x90059, 0x40},
-+	{0x9005a, 0x633},
-+	{0x9005b, 0x179},
-+	{0x9005c, 0x1},
-+	{0x9005d, 0x618},
-+	{0x9005e, 0x109},
-+	{0x9005f, 0x40c0},
-+	{0x90060, 0x633},
-+	{0x90061, 0x149},
-+	{0x90062, 0x8},
-+	{0x90063, 0x4},
-+	{0x90064, 0x48},
-+	{0x90065, 0x4040},
-+	{0x90066, 0x633},
-+	{0x90067, 0x149},
-+	{0x90068, 0x0},
-+	{0x90069, 0x4},
-+	{0x9006a, 0x48},
-+	{0x9006b, 0x40},
-+	{0x9006c, 0x633},
-+	{0x9006d, 0x149},
-+	{0x9006e, 0x0},
-+	{0x9006f, 0x658},
-+	{0x90070, 0x109},
-+	{0x90071, 0x10},
-+	{0x90072, 0x4},
-+	{0x90073, 0x18},
-+	{0x90074, 0x0},
-+	{0x90075, 0x4},
-+	{0x90076, 0x78},
-+	{0x90077, 0x549},
-+	{0x90078, 0x633},
-+	{0x90079, 0x159},
-+	{0x9007a, 0xd49},
-+	{0x9007b, 0x633},
-+	{0x9007c, 0x159},
-+	{0x9007d, 0x94a},
-+	{0x9007e, 0x633},
-+	{0x9007f, 0x159},
-+	{0x90080, 0x441},
-+	{0x90081, 0x633},
-+	{0x90082, 0x149},
-+	{0x90083, 0x42},
-+	{0x90084, 0x633},
-+	{0x90085, 0x149},
-+	{0x90086, 0x1},
-+	{0x90087, 0x633},
-+	{0x90088, 0x149},
-+	{0x90089, 0x0},
-+	{0x9008a, 0xe0},
-+	{0x9008b, 0x109},
-+	{0x9008c, 0xa},
-+	{0x9008d, 0x10},
-+	{0x9008e, 0x109},
-+	{0x9008f, 0x9},
-+	{0x90090, 0x3c0},
-+	{0x90091, 0x149},
-+	{0x90092, 0x9},
-+	{0x90093, 0x3c0},
-+	{0x90094, 0x159},
-+	{0x90095, 0x18},
-+	{0x90096, 0x10},
-+	{0x90097, 0x109},
-+	{0x90098, 0x0},
-+	{0x90099, 0x3c0},
-+	{0x9009a, 0x109},
-+	{0x9009b, 0x18},
-+	{0x9009c, 0x4},
-+	{0x9009d, 0x48},
-+	{0x9009e, 0x18},
-+	{0x9009f, 0x4},
-+	{0x900a0, 0x58},
-+	{0x900a1, 0xb},
-+	{0x900a2, 0x10},
-+	{0x900a3, 0x109},
-+	{0x900a4, 0x1},
-+	{0x900a5, 0x10},
-+	{0x900a6, 0x109},
-+	{0x900a7, 0x5},
-+	{0x900a8, 0x7c0},
-+	{0x900a9, 0x109},
-+	{0x40000, 0x811},
-+	{0x40020, 0x880},
-+	{0x40040, 0x0},
-+	{0x40060, 0x0},
-+	{0x40001, 0x4008},
-+	{0x40021, 0x83},
-+	{0x40041, 0x4f},
-+	{0x40061, 0x0},
-+	{0x40002, 0x4040},
-+	{0x40022, 0x83},
-+	{0x40042, 0x51},
-+	{0x40062, 0x0},
-+	{0x40003, 0x811},
-+	{0x40023, 0x880},
-+	{0x40043, 0x0},
-+	{0x40063, 0x0},
-+	{0x40004, 0x720},
-+	{0x40024, 0xf},
-+	{0x40044, 0x1740},
-+	{0x40064, 0x0},
-+	{0x40005, 0x16},
-+	{0x40025, 0x83},
-+	{0x40045, 0x4b},
-+	{0x40065, 0x0},
-+	{0x40006, 0x716},
-+	{0x40026, 0xf},
-+	{0x40046, 0x2001},
-+	{0x40066, 0x0},
-+	{0x40007, 0x716},
-+	{0x40027, 0xf},
-+	{0x40047, 0x2800},
-+	{0x40067, 0x0},
-+	{0x40008, 0x716},
-+	{0x40028, 0xf},
-+	{0x40048, 0xf00},
-+	{0x40068, 0x0},
-+	{0x40009, 0x720},
-+	{0x40029, 0xf},
-+	{0x40049, 0x1400},
-+	{0x40069, 0x0},
-+	{0x4000a, 0xe08},
-+	{0x4002a, 0xc15},
-+	{0x4004a, 0x0},
-+	{0x4006a, 0x0},
-+	{0x4000b, 0x625},
-+	{0x4002b, 0x15},
-+	{0x4004b, 0x0},
-+	{0x4006b, 0x0},
-+	{0x4000c, 0x4028},
-+	{0x4002c, 0x80},
-+	{0x4004c, 0x0},
-+	{0x4006c, 0x0},
-+	{0x4000d, 0xe08},
-+	{0x4002d, 0xc1a},
-+	{0x4004d, 0x0},
-+	{0x4006d, 0x0},
-+	{0x4000e, 0x625},
-+	{0x4002e, 0x1a},
-+	{0x4004e, 0x0},
-+	{0x4006e, 0x0},
-+	{0x4000f, 0x4040},
-+	{0x4002f, 0x80},
-+	{0x4004f, 0x0},
-+	{0x4006f, 0x0},
-+	{0x40010, 0x2604},
-+	{0x40030, 0x15},
-+	{0x40050, 0x0},
-+	{0x40070, 0x0},
-+	{0x40011, 0x708},
-+	{0x40031, 0x5},
-+	{0x40051, 0x0},
-+	{0x40071, 0x2002},
-+	{0x40012, 0x8},
-+	{0x40032, 0x80},
-+	{0x40052, 0x0},
-+	{0x40072, 0x0},
-+	{0x40013, 0x2604},
-+	{0x40033, 0x1a},
-+	{0x40053, 0x0},
-+	{0x40073, 0x0},
-+	{0x40014, 0x708},
-+	{0x40034, 0xa},
-+	{0x40054, 0x0},
-+	{0x40074, 0x2002},
-+	{0x40015, 0x4040},
-+	{0x40035, 0x80},
-+	{0x40055, 0x0},
-+	{0x40075, 0x0},
-+	{0x40016, 0x60a},
-+	{0x40036, 0x15},
-+	{0x40056, 0x1200},
-+	{0x40076, 0x0},
-+	{0x40017, 0x61a},
-+	{0x40037, 0x15},
-+	{0x40057, 0x1300},
-+	{0x40077, 0x0},
-+	{0x40018, 0x60a},
-+	{0x40038, 0x1a},
-+	{0x40058, 0x1200},
-+	{0x40078, 0x0},
-+	{0x40019, 0x642},
-+	{0x40039, 0x1a},
-+	{0x40059, 0x1300},
-+	{0x40079, 0x0},
-+	{0x4001a, 0x4808},
-+	{0x4003a, 0x880},
-+	{0x4005a, 0x0},
-+	{0x4007a, 0x0},
-+	{0x900aa, 0x0},
-+	{0x900ab, 0x790},
-+	{0x900ac, 0x11a},
-+	{0x900ad, 0x8},
-+	{0x900ae, 0x7aa},
-+	{0x900af, 0x2a},
-+	{0x900b0, 0x10},
-+	{0x900b1, 0x7b2},
-+	{0x900b2, 0x2a},
-+	{0x900b3, 0x0},
-+	{0x900b4, 0x7c8},
-+	{0x900b5, 0x109},
-+	{0x900b6, 0x10},
-+	{0x900b7, 0x10},
-+	{0x900b8, 0x109},
-+	{0x900b9, 0x10},
-+	{0x900ba, 0x2a8},
-+	{0x900bb, 0x129},
-+	{0x900bc, 0x8},
-+	{0x900bd, 0x370},
-+	{0x900be, 0x129},
-+	{0x900bf, 0xa},
-+	{0x900c0, 0x3c8},
-+	{0x900c1, 0x1a9},
-+	{0x900c2, 0xc},
-+	{0x900c3, 0x408},
-+	{0x900c4, 0x199},
-+	{0x900c5, 0x14},
-+	{0x900c6, 0x790},
-+	{0x900c7, 0x11a},
-+	{0x900c8, 0x8},
-+	{0x900c9, 0x4},
-+	{0x900ca, 0x18},
-+	{0x900cb, 0xe},
-+	{0x900cc, 0x408},
-+	{0x900cd, 0x199},
-+	{0x900ce, 0x8},
-+	{0x900cf, 0x8568},
-+	{0x900d0, 0x108},
-+	{0x900d1, 0x18},
-+	{0x900d2, 0x790},
-+	{0x900d3, 0x16a},
-+	{0x900d4, 0x8},
-+	{0x900d5, 0x1d8},
-+	{0x900d6, 0x169},
-+	{0x900d7, 0x10},
-+	{0x900d8, 0x8558},
-+	{0x900d9, 0x168},
-+	{0x900da, 0x1ff8},
-+	{0x900db, 0x85a8},
-+	{0x900dc, 0x1e8},
-+	{0x900dd, 0x50},
-+	{0x900de, 0x798},
-+	{0x900df, 0x16a},
-+	{0x900e0, 0x60},
-+	{0x900e1, 0x7a0},
-+	{0x900e2, 0x16a},
-+	{0x900e3, 0x8},
-+	{0x900e4, 0x8310},
-+	{0x900e5, 0x168},
-+	{0x900e6, 0x8},
-+	{0x900e7, 0xa310},
-+	{0x900e8, 0x168},
-+	{0x900e9, 0xa},
-+	{0x900ea, 0x408},
-+	{0x900eb, 0x169},
-+	{0x900ec, 0x6e},
-+	{0x900ed, 0x0},
-+	{0x900ee, 0x68},
-+	{0x900ef, 0x0},
-+	{0x900f0, 0x408},
-+	{0x900f1, 0x169},
-+	{0x900f2, 0x0},
-+	{0x900f3, 0x8310},
-+	{0x900f4, 0x168},
-+	{0x900f5, 0x0},
-+	{0x900f6, 0xa310},
-+	{0x900f7, 0x168},
-+	{0x900f8, 0x1ff8},
-+	{0x900f9, 0x85a8},
-+	{0x900fa, 0x1e8},
-+	{0x900fb, 0x68},
-+	{0x900fc, 0x798},
-+	{0x900fd, 0x16a},
-+	{0x900fe, 0x78},
-+	{0x900ff, 0x7a0},
-+	{0x90100, 0x16a},
-+	{0x90101, 0x68},
-+	{0x90102, 0x790},
-+	{0x90103, 0x16a},
-+	{0x90104, 0x8},
-+	{0x90105, 0x8b10},
-+	{0x90106, 0x168},
-+	{0x90107, 0x8},
-+	{0x90108, 0xab10},
-+	{0x90109, 0x168},
-+	{0x9010a, 0xa},
-+	{0x9010b, 0x408},
-+	{0x9010c, 0x169},
-+	{0x9010d, 0x58},
-+	{0x9010e, 0x0},
-+	{0x9010f, 0x68},
-+	{0x90110, 0x0},
-+	{0x90111, 0x408},
-+	{0x90112, 0x169},
-+	{0x90113, 0x0},
-+	{0x90114, 0x8b10},
-+	{0x90115, 0x168},
-+	{0x90116, 0x1},
-+	{0x90117, 0xab10},
-+	{0x90118, 0x168},
-+	{0x90119, 0x0},
-+	{0x9011a, 0x1d8},
-+	{0x9011b, 0x169},
-+	{0x9011c, 0x80},
-+	{0x9011d, 0x790},
-+	{0x9011e, 0x16a},
-+	{0x9011f, 0x18},
-+	{0x90120, 0x7aa},
-+	{0x90121, 0x6a},
-+	{0x90122, 0xa},
-+	{0x90123, 0x0},
-+	{0x90124, 0x1e9},
-+	{0x90125, 0x8},
-+	{0x90126, 0x8080},
-+	{0x90127, 0x108},
-+	{0x90128, 0xf},
-+	{0x90129, 0x408},
-+	{0x9012a, 0x169},
-+	{0x9012b, 0xc},
-+	{0x9012c, 0x0},
-+	{0x9012d, 0x68},
-+	{0x9012e, 0x9},
-+	{0x9012f, 0x0},
-+	{0x90130, 0x1a9},
-+	{0x90131, 0x0},
-+	{0x90132, 0x408},
-+	{0x90133, 0x169},
-+	{0x90134, 0x0},
-+	{0x90135, 0x8080},
-+	{0x90136, 0x108},
-+	{0x90137, 0x8},
-+	{0x90138, 0x7aa},
-+	{0x90139, 0x6a},
-+	{0x9013a, 0x0},
-+	{0x9013b, 0x8568},
-+	{0x9013c, 0x108},
-+	{0x9013d, 0xb7},
-+	{0x9013e, 0x790},
-+	{0x9013f, 0x16a},
-+	{0x90140, 0x1f},
-+	{0x90141, 0x0},
-+	{0x90142, 0x68},
-+	{0x90143, 0x8},
-+	{0x90144, 0x8558},
-+	{0x90145, 0x168},
-+	{0x90146, 0xf},
-+	{0x90147, 0x408},
-+	{0x90148, 0x169},
-+	{0x90149, 0xd},
-+	{0x9014a, 0x0},
-+	{0x9014b, 0x68},
-+	{0x9014c, 0x0},
-+	{0x9014d, 0x408},
-+	{0x9014e, 0x169},
-+	{0x9014f, 0x0},
-+	{0x90150, 0x8558},
-+	{0x90151, 0x168},
-+	{0x90152, 0x8},
-+	{0x90153, 0x3c8},
-+	{0x90154, 0x1a9},
-+	{0x90155, 0x3},
-+	{0x90156, 0x370},
-+	{0x90157, 0x129},
-+	{0x90158, 0x20},
-+	{0x90159, 0x2aa},
-+	{0x9015a, 0x9},
-+	{0x9015b, 0x8},
-+	{0x9015c, 0xe8},
-+	{0x9015d, 0x109},
-+	{0x9015e, 0x0},
-+	{0x9015f, 0x8140},
-+	{0x90160, 0x10c},
-+	{0x90161, 0x10},
-+	{0x90162, 0x8138},
-+	{0x90163, 0x104},
-+	{0x90164, 0x8},
-+	{0x90165, 0x448},
-+	{0x90166, 0x109},
-+	{0x90167, 0xf},
-+	{0x90168, 0x7c0},
-+	{0x90169, 0x109},
-+	{0x9016a, 0x0},
-+	{0x9016b, 0xe8},
-+	{0x9016c, 0x109},
-+	{0x9016d, 0x47},
-+	{0x9016e, 0x630},
-+	{0x9016f, 0x109},
-+	{0x90170, 0x8},
-+	{0x90171, 0x618},
-+	{0x90172, 0x109},
-+	{0x90173, 0x8},
-+	{0x90174, 0xe0},
-+	{0x90175, 0x109},
-+	{0x90176, 0x0},
-+	{0x90177, 0x7c8},
-+	{0x90178, 0x109},
-+	{0x90179, 0x8},
-+	{0x9017a, 0x8140},
-+	{0x9017b, 0x10c},
-+	{0x9017c, 0x0},
-+	{0x9017d, 0x478},
-+	{0x9017e, 0x109},
-+	{0x9017f, 0x0},
-+	{0x90180, 0x1},
-+	{0x90181, 0x8},
-+	{0x90182, 0x8},
-+	{0x90183, 0x4},
-+	{0x90184, 0x0},
-+	{0x90006, 0x8},
-+	{0x90007, 0x7c8},
-+	{0x90008, 0x109},
-+	{0x90009, 0x0},
-+	{0x9000a, 0x400},
-+	{0x9000b, 0x106},
-+	{0xd00e7, 0x400},
-+	{0x90017, 0x0},
-+	{0x9001f, 0x2b},
-+	{0x90026, 0x69},
-+	{0x400d0, 0x0},
-+	{0x400d1, 0x101},
-+	{0x400d2, 0x105},
-+	{0x400d3, 0x107},
-+	{0x400d4, 0x10f},
-+	{0x400d5, 0x202},
-+	{0x400d6, 0x20a},
-+	{0x400d7, 0x20b},
-+	{0x2003a, 0x2},
-+	{0x200be, 0x3},
-+	{0x2000b, 0x41a},
-+	{0x2000c, 0xe9},
-+	{0x2000d, 0x91c},
-+	{0x2000e, 0x2c},
-+	{0x12000b, 0x20d},
-+	{0x12000c, 0x74},
-+	{0x12000d, 0x48e},
-+	{0x12000e, 0x2c},
-+	{0x22000b, 0xb0},
-+	{0x22000c, 0x27},
-+	{0x22000d, 0x186},
-+	{0x22000e, 0x10},
-+	{0x9000c, 0x0},
-+	{0x9000d, 0x173},
-+	{0x9000e, 0x60},
-+	{0x9000f, 0x6110},
-+	{0x90010, 0x2152},
-+	{0x90011, 0xdfbd},
-+	{0x90012, 0x2060},
-+	{0x90013, 0x6152},
-+	{0x20010, 0x5a},
-+	{0x20011, 0x3},
-+	{0x120010, 0x5a},
-+	{0x120011, 0x3},
-+	{0x40080, 0xe0},
-+	{0x40081, 0x12},
-+	{0x40082, 0xe0},
-+	{0x40083, 0x12},
-+	{0x40084, 0xe0},
-+	{0x40085, 0x12},
-+	{0x140080, 0xe0},
-+	{0x140081, 0x12},
-+	{0x140082, 0xe0},
-+	{0x140083, 0x12},
-+	{0x140084, 0xe0},
-+	{0x140085, 0x12},
-+	{0x240080, 0xe0},
-+	{0x240081, 0x12},
-+	{0x240082, 0xe0},
-+	{0x240083, 0x12},
-+	{0x240084, 0xe0},
-+	{0x240085, 0x12},
-+	{0x400fd, 0xf},
-+	{0x400f1, 0xe},
-+	{0x10011, 0x1},
-+	{0x10012, 0x1},
-+	{0x10013, 0x180},
-+	{0x10018, 0x1},
-+	{0x10002, 0x6209},
-+	{0x100b2, 0x1},
-+	{0x101b4, 0x1},
-+	{0x102b4, 0x1},
-+	{0x103b4, 0x1},
-+	{0x104b4, 0x1},
-+	{0x105b4, 0x1},
-+	{0x106b4, 0x1},
-+	{0x107b4, 0x1},
-+	{0x108b4, 0x1},
-+	{0x11011, 0x1},
-+	{0x11012, 0x1},
-+	{0x11013, 0x180},
-+	{0x11018, 0x1},
-+	{0x11002, 0x6209},
-+	{0x110b2, 0x1},
-+	{0x111b4, 0x1},
-+	{0x112b4, 0x1},
-+	{0x113b4, 0x1},
-+	{0x114b4, 0x1},
-+	{0x115b4, 0x1},
-+	{0x116b4, 0x1},
-+	{0x117b4, 0x1},
-+	{0x118b4, 0x1},
-+	{0x20089, 0x1},
-+	{0x20088, 0x19},
-+	{0xc0080, 0x0},
-+	{0xd0000, 0x1},
-+};
-+
-+static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
-+	{
-+		/* P0 3733mts 1D */
-+		.drate = 3733,
-+		.fw_type = FW_1D_IMAGE,
-+		.fsp_cfg = ddr_fsp0_cfg,
-+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
-+	},
-+	{
-+		/* P0 3733mts 2D */
-+		.drate = 3733,
-+		.fw_type = FW_2D_IMAGE,
-+		.fsp_cfg = ddr_fsp0_2d_cfg,
-+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
-+	},
-+};
-+
-+/* ddr timing config params */
-+struct dram_timing_info frdm_imx93_dram_timing = {
-+	.ddrc_cfg = ddr_ddrc_cfg,
-+	.ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
-+	.ddrphy_cfg = ddr_ddrphy_cfg,
-+	.ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
-+	.fsp_msg = ddr_dram_fsp_msg,
-+	.fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
-+	.ddrphy_trained_csr = ddr_ddrphy_trained_csr,
-+	.ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
-+	.ddrphy_pie = ddr_phy_pie,
-+	.ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
-+	.fsp_table = { 3733, },
-+	.fsp_cfg = ddr_dram_fsp_cfg,
-+	.fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
-+};
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 6612a51452..f06e4af319 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -169,6 +169,7 @@ lwl-$(CONFIG_MACH_NXP_IMX8MM_EVK) += imx8mm-evk.dtb.o imx8mm-evkb.dtb.o
- lwl-$(CONFIG_MACH_NXP_IMX8MN_EVK) += imx8mn-evk.dtb.o imx8mn-ddr4-evk.dtb.o
- lwl-$(CONFIG_MACH_NXP_IMX8MP_EVK) += imx8mp-evk.dtb.o
- lwl-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += imx8mq-evk.dtb.o
-+lwl-$(CONFIG_MACH_NXP_IMX93_FRDM) += imx93-frdm.dtb.o
- lwl-$(CONFIG_MACH_INNOCOMM_WB15) += imx8mm-innocomm-wb15-evk.dtb.o
- lwl-$(CONFIG_MACH_TQ_MBA8MPXL) += imx8mp-tqma8mpql-mba8mpxl.dtb.o
- lwl-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += tegra20-colibri-iris.dtb.o
-diff --git a/arch/arm/dts/imx93-frdm.dts b/arch/arm/dts/imx93-frdm.dts
-new file mode 100644
-index 0000000000..da828abf22
---- /dev/null
-+++ b/arch/arm/dts/imx93-frdm.dts
-@@ -0,0 +1,534 @@
-+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-+/dts-v1/;
-+
-+#include <dt-bindings/usb/pd.h>
-+#include <arm64/freescale/imx93.dtsi>
-+
-+/ {
-+	compatible = "fsl,imx93-11x11-frdm", "fsl,imx93";
-+	model = "NXP i.MX93 11X11 FRDM board";
-+
-+	aliases {
-+		mmc0 = &usdhc1; /* EMMC */
-+		mmc1 = &usdhc2; /* uSD */
-+		rtc0 = &pcf2131;
-+		serial0 = &lpuart1;
-+	};
-+
-+	chosen {
-+		stdout-path = &lpuart1;
-+	};
-+
-+	reg_vref_1v8: regulator-adc-vref {
-+		compatible = "regulator-fixed";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		regulator-name = "vref_1v8";
-+	};
-+
-+	reg_can2_standby: regulator-can2-stby {
-+		compatible = "regulator-fixed";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-name = "can2-stby";
-+		gpio = <&pcal6524 23 GPIO_ACTIVE_LOW>;
-+	};
-+
-+	reg_usdhc2_vmmc: regulator-usdhc2 {
-+		compatible = "regulator-fixed";
-+		off-on-delay-us = <12000>;
-+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
-+		pinctrl-names = "default";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-name = "VSD_3V3";
-+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+	};
-+};
-+
-+&eqos {
-+	phy-handle = <&ethphy1>;
-+	phy-mode = "rgmii-id";
-+	pinctrl-0 = <&pinctrl_eqos>;
-+	pinctrl-1 = <&pinctrl_eqos_sleep>;
-+	pinctrl-names = "default", "sleep";
-+	status = "okay";
-+
-+	mdio {
-+		compatible = "snps,dwmac-mdio";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		clock-frequency = <5000000>;
-+
-+		ethphy1: ethernet-phy@1 {
-+			reg = <1>;
-+			reset-assert-us = <10000>;
-+			reset-deassert-us = <80000>;
-+			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&fec {
-+	phy-handle = <&ethphy2>;
-+	phy-mode = "rgmii-id";
-+	pinctrl-0 = <&pinctrl_fec>;
-+	pinctrl-1 = <&pinctrl_fec_sleep>;
-+	pinctrl-names = "default", "sleep";
-+	fsl,magic-packet;
-+	status = "okay";
-+
-+	mdio {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		clock-frequency = <5000000>;
-+
-+		ethphy2: ethernet-phy@2 {
-+			reg = <2>;
-+			eee-broken-1000t;
-+			reset-assert-us = <10000>;
-+			reset-deassert-us = <80000>;
-+			reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&lpi2c2 {
-+	clock-frequency = <400000>;
-+	pinctrl-0 = <&pinctrl_lpi2c2>;
-+	pinctrl-names = "default";
-+	status = "okay";
-+
-+	pcal6524: gpio@22 {
-+		compatible = "nxp,pcal6524";
-+		reg = <0x22>;
-+		#interrupt-cells = <2>;
-+		interrupt-controller;
-+		interrupt-parent = <&gpio3>;
-+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-+		#gpio-cells = <2>;
-+		gpio-controller;
-+		pinctrl-0 = <&pinctrl_pcal6524>;
-+		pinctrl-names = "default";
-+	};
-+
-+	pmic@25 {
-+		compatible = "nxp,pca9451a";
-+		reg = <0x25>;
-+		interrupt-parent = <&pcal6524>;
-+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-+
-+		regulators {
-+
-+			buck1: BUCK1 {
-+				regulator-name = "BUCK1";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <650000>;
-+				regulator-max-microvolt = <2237500>;
-+				regulator-ramp-delay = <3125>;
-+			};
-+
-+			buck2: BUCK2 {
-+				regulator-name = "BUCK2";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <600000>;
-+				regulator-max-microvolt = <2187500>;
-+				regulator-ramp-delay = <3125>;
-+			};
-+
-+			buck4: BUCK4 {
-+				regulator-name = "BUCK4";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <600000>;
-+				regulator-max-microvolt = <3400000>;
-+			};
-+
-+			buck5: BUCK5 {
-+				regulator-name = "BUCK5";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <600000>;
-+				regulator-max-microvolt = <3400000>;
-+			};
-+
-+			buck6: BUCK6 {
-+				regulator-name = "BUCK6";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <600000>;
-+				regulator-max-microvolt = <3400000>;
-+			};
-+
-+			ldo1: LDO1 {
-+				regulator-name = "LDO1";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1600000>;
-+				regulator-max-microvolt = <3300000>;
-+			};
-+
-+			ldo4: LDO4 {
-+				regulator-name = "LDO4";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <3300000>;
-+			};
-+
-+			ldo5: LDO5 {
-+				regulator-name = "LDO5";
-+				regulator-always-on;
-+				regulator-boot-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <3300000>;
-+			};
-+		};
-+	};
-+
-+	eeprom: eeprom@50 {
-+		compatible = "atmel,24c256";
-+		reg = <0x50>;
-+		pagesize = <64>;
-+	};
-+};
-+
-+&lpi2c3 {
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	clock-frequency = <400000>;
-+	pinctrl-0 = <&pinctrl_lpi2c3>;
-+	pinctrl-names = "default";
-+	status = "okay";
-+
-+	ptn5110: tcpc@50 {
-+		compatible = "nxp,ptn5110", "tcpci";
-+		reg = <0x50>;
-+		interrupt-parent = <&gpio3>;
-+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-+
-+		typec1_con: connector {
-+			compatible = "usb-c-connector";
-+			data-role = "dual";
-+			label = "USB-C";
-+			op-sink-microwatt = <15000000>;
-+			power-role = "dual";
-+			self-powered;
-+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-+				     PDO_VAR(5000, 20000, 3000)>;
-+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-+			try-power-role = "sink";
-+
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				port@0 {
-+					reg = <0>;
-+
-+					typec1_dr_sw: endpoint {
-+						remote-endpoint = <&usb1_drd_sw>;
-+					};
-+				};
-+			};
-+		};
-+	};
-+
-+	pcf2131: rtc@53 {
-+		compatible = "nxp,pcf2131";
-+		reg = <0x53>;
-+		interrupt-parent = <&pcal6524>;
-+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-+	};
-+};
-+
-+&lpuart1 { /* console */
-+	pinctrl-0 = <&pinctrl_uart1>;
-+	pinctrl-names = "default";
-+	status = "okay";
-+};
-+
-+&usbotg1 {
-+	adp-disable;
-+	disable-over-current;
-+	dr_mode = "otg";
-+	hnp-disable;
-+	srp-disable;
-+	usb-role-switch;
-+	samsung,picophy-dc-vol-level-adjust = <7>;
-+	samsung,picophy-pre-emp-curr-control = <3>;
-+	status = "okay";
-+
-+	port {
-+
-+		usb1_drd_sw: endpoint {
-+			remote-endpoint = <&typec1_dr_sw>;
-+		};
-+	};
-+};
-+
-+&usbotg2 {
-+	disable-over-current;
-+	dr_mode = "host";
-+	samsung,picophy-dc-vol-level-adjust = <7>;
-+	samsung,picophy-pre-emp-curr-control = <3>;
-+	status = "okay";
-+};
-+
-+&usdhc1 {
-+	bus-width = <8>;
-+	non-removable;
-+	pinctrl-0 = <&pinctrl_usdhc1>;
-+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-+	status = "okay";
-+};
-+
-+&usdhc2 {
-+	bus-width = <4>;
-+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
-+	no-mmc;
-+	no-sdio;
-+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
-+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-+	vmmc-supply = <&reg_usdhc2_vmmc>;
-+	status = "okay";
-+};
-+
-+&wdog3 {
-+	status = "okay";
-+};
-+
-+&iomuxc {
-+
-+	pinctrl_eqos: eqosgrp {
-+		fsl,pins = <
-+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
-+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
-+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
-+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
-+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
-+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
-+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x58e
-+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
-+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
-+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
-+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
-+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
-+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
-+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
-+		>;
-+	};
-+
-+	pinctrl_eqos_sleep: eqossleepgrp {
-+		fsl,pins = <
-+			MX93_PAD_ENET1_MDC__GPIO4_IO00				0x31e
-+			MX93_PAD_ENET1_MDIO__GPIO4_IO01				0x31e
-+			MX93_PAD_ENET1_RD0__GPIO4_IO10				0x31e
-+			MX93_PAD_ENET1_RD1__GPIO4_IO11				0x31e
-+			MX93_PAD_ENET1_RD2__GPIO4_IO12				0x31e
-+			MX93_PAD_ENET1_RD3__GPIO4_IO13				0x31e
-+			MX93_PAD_ENET1_RXC__GPIO4_IO09				0x31e
-+			MX93_PAD_ENET1_RX_CTL__GPIO4_IO08			0x31e
-+			MX93_PAD_ENET1_TD0__GPIO4_IO05				0x31e
-+			MX93_PAD_ENET1_TD1__GPIO4_IO04				0x31e
-+			MX93_PAD_ENET1_TD2__GPIO4_IO03				0x31e
-+			MX93_PAD_ENET1_TD3__GPIO4_IO02				0x31e
-+			MX93_PAD_ENET1_TXC__GPIO4_IO07				0x31e
-+			MX93_PAD_ENET1_TX_CTL__GPIO4_IO06			0x31e
-+		>;
-+	};
-+
-+	pinctrl_fec: fecgrp {
-+		fsl,pins = <
-+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
-+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
-+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
-+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
-+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
-+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
-+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x58e
-+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
-+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
-+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
-+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
-+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
-+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
-+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
-+		>;
-+	};
-+
-+	pinctrl_fec_sleep: fecsleepgrp {
-+		fsl,pins = <
-+			MX93_PAD_ENET2_MDC__GPIO4_IO14			0x51e
-+			MX93_PAD_ENET2_MDIO__GPIO4_IO15			0x51e
-+			MX93_PAD_ENET2_RD0__GPIO4_IO24			0x51e
-+			MX93_PAD_ENET2_RD1__GPIO4_IO25			0x51e
-+			MX93_PAD_ENET2_RD2__GPIO4_IO26			0x51e
-+			MX93_PAD_ENET2_RD3__GPIO4_IO27			0x51e
-+			MX93_PAD_ENET2_RXC__GPIO4_IO23			0x51e
-+			MX93_PAD_ENET2_RX_CTL__GPIO4_IO22		0x51e
-+			MX93_PAD_ENET2_TD0__GPIO4_IO19			0x51e
-+			MX93_PAD_ENET2_TD1__GPIO4_IO18			0x51e
-+			MX93_PAD_ENET2_TD2__GPIO4_IO17			0x51e
-+			MX93_PAD_ENET2_TD3__GPIO4_IO16			0x51e
-+			MX93_PAD_ENET2_TXC__GPIO4_IO21			0x51e
-+			MX93_PAD_ENET2_TX_CTL__GPIO4_IO20		0x51e
-+		>;
-+	};
-+
-+	pinctrl_lpi2c2: lpi2c2grp {
-+		fsl,pins = <
-+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
-+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
-+		>;
-+	};
-+
-+	pinctrl_lpi2c3: lpi2c3grp {
-+		fsl,pins = <
-+			MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
-+			MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
-+		>;
-+	};
-+
-+	pinctrl_pcal6524: pcal6524grp {
-+		fsl,pins = <
-+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
-+		>;
-+	};
-+
-+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
-+		fsl,pins = <
-+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
-+		>;
-+	};
-+
-+	pinctrl_uart1: uart1grp {
-+		fsl,pins = <
-+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
-+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
-+		>;
-+	};
-+
-+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
-+	pinctrl_usdhc1: usdhc1grp {
-+		fsl,pins = <
-+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x1582
-+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x40001382
-+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x40001382
-+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x40001382
-+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x40001382
-+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x40001382
-+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x40001382
-+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x40001382
-+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x40001382
-+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x40001382
-+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x1582
-+		>;
-+	};
-+
-+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
-+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
-+		fsl,pins = <
-+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x158e
-+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x4000138e
-+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x4000138e
-+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x4000138e
-+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x4000138e
-+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x4000138e
-+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x4000138e
-+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x4000138e
-+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x4000138e
-+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x4000138e
-+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x158e
-+		>;
-+	};
-+
-+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
-+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
-+		fsl,pins = <
-+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
-+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
-+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
-+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
-+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
-+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
-+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
-+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
-+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
-+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
-+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
-+		>;
-+	};
-+
-+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
-+		fsl,pins = <
-+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
-+		>;
-+	};
-+
-+	pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
-+		fsl,pins = <
-+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x51e
-+		>;
-+	};
-+
-+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
-+	pinctrl_usdhc2: usdhc2grp {
-+		fsl,pins = <
-+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x1582
-+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x40001382
-+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x40001382
-+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x40001382
-+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x40001382
-+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x40001382
-+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
-+		>;
-+	};
-+
-+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
-+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-+		fsl,pins = <
-+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x158e
-+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x4000138e
-+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x4000138e
-+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x4000138e
-+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x4000138e
-+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x4000138e
-+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
-+		>;
-+	};
-+
-+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
-+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-+		fsl,pins = <
-+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
-+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
-+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
-+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
-+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
-+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
-+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
-+		>;
-+	};
-+
-+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
-+		fsl,pins = <
-+			MX93_PAD_SD2_CLK__GPIO3_IO01		0x51e
-+			MX93_PAD_SD2_CMD__GPIO3_IO02		0x51e
-+			MX93_PAD_SD2_DATA0__GPIO3_IO03		0x51e
-+			MX93_PAD_SD2_DATA1__GPIO3_IO04		0x51e
-+			MX93_PAD_SD2_DATA2__GPIO3_IO05		0x51e
-+			MX93_PAD_SD2_DATA3__GPIO3_IO06		0x51e
-+			MX93_PAD_SD2_VSELECT__GPIO3_IO19	0x51e
-+		>;
-+	};
-+};
-+#include "imx93.dtsi"
-diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
-index 02b9fb4dac..6e757034ae 100644
---- a/arch/arm/mach-imx/Kconfig
-+++ b/arch/arm/mach-imx/Kconfig
-@@ -763,6 +763,15 @@ config MACH_TQMA93XX
- 	select FIRMWARE_IMX93_ATF
- 	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
- 
-+config MACH_NXP_IMX93_FRDM
-+	bool "NXP IMX93 FRDM Board"
-+	select ARCH_IMX93
-+	select IMX9_DRAM
-+	select I2C
-+	select I2C_IMX_LPI2C
-+	select FIRMWARE_IMX93_ATF
-+	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
-+
- endif
- 
- endmenu
-diff --git a/images/Makefile.imx b/images/Makefile.imx
-index 93264254e9..7a7f54f8d1 100644
---- a/images/Makefile.imx
-+++ b/images/Makefile.imx
-@@ -525,3 +525,7 @@ image-$(CONFIG_MACH_TQMA93XX) += barebox-tqma93xx.img
- pblb-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX93) += start_imx93_phyboard_segin
- FILE_barebox-phyboard_segin.img = start_imx93_phyboard_segin.pblb.imx9img
- image-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX93) += barebox-phyboard_segin.img
-+
-+pblb-$(CONFIG_MACH_NXP_IMX93_FRDM) += start_imx93_nxp_mx93_frdm
-+FILE_barebox-nxp_mx93_frdm.img = start_imx93_nxp_mx93_frdm.pblb.imx9img
-+image-$(CONFIG_MACH_NXP_IMX93_FRDM) += barebox-nxp_mx93_frdm.img
--- 
-2.47.3
-
diff --git a/configs/platform-v8a/patches/barebox-2025.07.0/series b/configs/platform-v8a/patches/barebox-2025.07.0/series
deleted file mode 100644
index c3b42eb..0000000
--- a/configs/platform-v8a/patches/barebox-2025.07.0/series
+++ /dev/null
@@ -1,2 +0,0 @@
-0001-common-deep-probe-include-of-for-of_device_id.patch
-0002-ARM-boards-i.MX93-Add-NXP-FRDM-i.MX93-support.patch
diff --git a/configs/platform-v8a/patches/barebox-2025.11.0/0001-ARM-i-MX93-reinstate-aliases.patch b/configs/platform-v8a/patches/barebox-2025.11.0/0001-ARM-i-MX93-reinstate-aliases.patch
new file mode 100644
index 0000000..cbf9969
--- /dev/null
+++ b/configs/platform-v8a/patches/barebox-2025.11.0/0001-ARM-i-MX93-reinstate-aliases.patch
@@ -0,0 +1,62 @@
+From: Ahmad Fatoum <a.fatoum@pengutronix.de>
+Date: Wed, 12 Nov 2025 22:37:26 +0100
+Subject: [PATCH master] ARM: i.MX93: reinstate aliases
+
+Regrettably, the i.MX93 device trees no longer list aliases in the SoC
+dtsi and instead leave it to the boards. This broke native GPIO
+controllers on i.MX93 in barebox, because the driver expects aliases for
+all device tree platforms.
+
+Add back the aliases into a barebox override.
+
+Fixes: 7fdf97ba2464 ("dts: update to v6.18-rc1")
+Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
+---
+ arch/arm/dts/imx93.dtsi | 37 ++++++++++++++++++++++++++++++++++++-
+ 1 file changed, 36 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/dts/imx93.dtsi b/arch/arm/dts/imx93.dtsi
+index 676819817b32..e1328de67243 100644
+--- a/arch/arm/dts/imx93.dtsi
++++ b/arch/arm/dts/imx93.dtsi
+@@ -1,4 +1,39 @@
+-/{
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/ {
++	aliases {
++		gpio0 = &gpio1;
++		gpio1 = &gpio2;
++		gpio2 = &gpio3;
++		gpio3 = &gpio4;
++		i2c0 = &lpi2c1;
++		i2c1 = &lpi2c2;
++		i2c2 = &lpi2c3;
++		i2c3 = &lpi2c4;
++		i2c4 = &lpi2c5;
++		i2c5 = &lpi2c6;
++		i2c6 = &lpi2c7;
++		i2c7 = &lpi2c8;
++		mmc0 = &usdhc1;
++		mmc1 = &usdhc2;
++		mmc2 = &usdhc3;
++		serial0 = &lpuart1;
++		serial1 = &lpuart2;
++		serial2 = &lpuart3;
++		serial3 = &lpuart4;
++		serial4 = &lpuart5;
++		serial5 = &lpuart6;
++		serial6 = &lpuart7;
++		serial7 = &lpuart8;
++		spi0 = &lpspi1;
++		spi1 = &lpspi2;
++		spi2 = &lpspi3;
++		spi3 = &lpspi4;
++		spi4 = &lpspi5;
++		spi5 = &lpspi6;
++		spi6 = &lpspi7;
++		spi7 = &lpspi8;
++	};
++
+ 	chosen {
+ 		barebox,bootsource-mmc0 = &usdhc1;
+ 		barebox,bootsource-mmc1 = &usdhc2;
diff --git a/configs/platform-v8a/patches/barebox-2025.11.0/series b/configs/platform-v8a/patches/barebox-2025.11.0/series
new file mode 100644
index 0000000..fd7918b
--- /dev/null
+++ b/configs/platform-v8a/patches/barebox-2025.11.0/series
@@ -0,0 +1 @@
+0001-ARM-i-MX93-reinstate-aliases.patch
diff --git a/configs/platform-v8a/platformconfig b/configs/platform-v8a/platformconfig
index ea4b81f..7509c78 100644
--- a/configs/platform-v8a/platformconfig
+++ b/configs/platform-v8a/platformconfig
@@ -181,10 +181,10 @@ PTXCONF_COMPILERPREFIX_R5="arm-v7a-linux-gnueabihf-"
 PTXCONF_BAREBOX_ARCH_STRING="arm"
 PTXCONF_BAREBOX_DEPENDENCIES=y
 PTXCONF_BAREBOX=y
-PTXCONF_BAREBOX_VERSION="2025.07.0"
+PTXCONF_BAREBOX_VERSION="2025.11.0"
 PTXCONF_BAREBOX_CONFIG_BUILDSYSTEM_VERSION=y
 PTXCONF_BAREBOX_BUILDSYSTEM_VERSION="${PTXDIST_VCS_VERSION}"
-PTXCONF_BAREBOX_MD5="043d58d05040b16d22c7879ae3c8a11b"
+PTXCONF_BAREBOX_MD5="867dea758c6ea8b350bac57009235e88"
 PTXCONF_BAREBOX_CONFIG="barebox.config"
 PTXCONF_BAREBOX_FIRMWARE=y
 PTXCONF_BAREBOX_EXTRA_ENV=y

-- 
2.47.3




^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [DistroKit] [PATCH v2 0/3] Update barebox to newest version
  2025-12-02 17:03 [DistroKit] [PATCH v2 0/3] Update barebox to newest version Fabian Pflug
                   ` (2 preceding siblings ...)
  2025-12-02 17:03 ` [DistroKit] [PATCH v2 3/3] v8a: barebox: version bump 2025.07.0 " Fabian Pflug
@ 2025-12-03 17:38 ` Robert Schwebel
  3 siblings, 0 replies; 5+ messages in thread
From: Robert Schwebel @ 2025-12-03 17:38 UTC (permalink / raw)
  To: Fabian Pflug; +Cc: distrokit

Series applied to next.

On Tue, Dec 02, 2025 at 06:03:35PM +0100, Fabian Pflug wrote:
> Updating barebox for the most used platforms to the newest version.
> 
> Signed-off-by: Fabian Pflug <f.pflug@pengutronix.de>
> ---
> Changes in v2:
> - Remove old patches
> - Add patch to fix i.MX93 regression
> - Link to v1: https://lore.distrokit.org/distrokit/20251202112849.2046517-1-f.pflug@pengutronix.de/T/#t
> 
> ---
> Fabian Pflug (3):
>       v7a: barebox: version bump 2025.06.1 -> 2025.11.0
>       v7a_noneon: barebox: version bump 2025.03.0 -> 2025.11.0
>       v8a: barebox: version bump 2025.07.0 -> 2025.11.0
> 
>  configs/platform-v7a/barebox-am335x-mlo.config     |  158 +-
>  configs/platform-v7a/barebox-at91.config           |  213 +-
>  configs/platform-v7a/barebox-at91.config.diff      |    8 +-
>  configs/platform-v7a/barebox-common.config         |  208 +-
>  configs/platform-v7a/barebox.config                |  220 +-
>  configs/platform-v7a/platformconfig                |    8 +-
>  configs/platform-v7a_noneon/barebox-at91.config    |  242 +-
>  .../platform-v7a_noneon/barebox-at91.config.diff   |    8 +-
>  configs/platform-v7a_noneon/barebox-common.config  |  241 +-
>  .../platform-v7a_noneon/barebox-vexpress.config    |  241 +-
>  .../barebox-vexpress.config.diff                   |    4 +-
>  ...dd-sama5d3-compatible-after-DT-regression.patch |   41 -
>  .../patches/barebox-2025.03.0/series               |    1 -
>  configs/platform-v7a_noneon/platformconfig         |    4 +-
>  configs/platform-v8a/barebox.config                |  166 +-
>  ...on-deep-probe-include-of-for-of_device_id.patch |   30 -
>  ...boards-i.MX93-Add-NXP-FRDM-i.MX93-support.patch | 2624 --------------------
>  .../platform-v8a/patches/barebox-2025.07.0/series  |    2 -
>  .../0001-ARM-i-MX93-reinstate-aliases.patch        |   62 +
>  .../platform-v8a/patches/barebox-2025.11.0/series  |    1 +
>  configs/platform-v8a/platformconfig                |    4 +-
>  ...-vexpress-increase-barebox-partition-size.patch |   74 -
>  patches/barebox-2025.06.1/series                   |    4 -
>  23 files changed, 1126 insertions(+), 3438 deletions(-)
> ---
> base-commit: be001f7cd0b7a1387aea136b6e60587194c1b562
> change-id: 20251202-fpg-barebox_update-9919516e5ff6
> 
> Best regards,
> -- 
> Fabian Pflug <f.pflug@pengutronix.de>
> 
> 
> 

-- 
Pengutronix e.K.                           | Dipl.-Ing. Robert Schwebel  |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |



^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2025-12-03 17:38 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-12-02 17:03 [DistroKit] [PATCH v2 0/3] Update barebox to newest version Fabian Pflug
2025-12-02 17:03 ` [DistroKit] [PATCH v2 1/3] v7a: barebox: version bump 2025.06.1 -> 2025.11.0 Fabian Pflug
2025-12-02 17:03 ` [DistroKit] [PATCH v2 2/3] v7a_noneon: barebox: version bump 2025.03.0 " Fabian Pflug
2025-12-02 17:03 ` [DistroKit] [PATCH v2 3/3] v8a: barebox: version bump 2025.07.0 " Fabian Pflug
2025-12-03 17:38 ` [DistroKit] [PATCH v2 0/3] Update barebox to newest version Robert Schwebel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox